Commit Graph

120 Commits

Author SHA1 Message Date
gemu2015 5f75f4619c ssd1351 support for 4 wire spi 2021-02-28 16:09:57 +01:00
Jan Bubík c6673d4081 new feature: LCD/DLP Projector Serial Control
- implemented as XDRV53
 - user must configure GPIO pins "DLP Rx" and "DLP Tx" for serial communication
 - emulates an additional RELAY by sending ON/OFF commands to Projector
 - continually polls the Projector's state to update virtual RELAY state
 - blocks RELAY1 in ON state while Projector is running (to protect the lamp)
 - serial codes for NEC and OPTOMA, ready for more manufacturers
 - tested with NEC V300W
2021-02-27 22:28:29 +01:00
André Araújo a321ff5562 Fix Ezo D.O sensor
- Unit of measure was in ppm and should be in mg/L
- Sensor was not detected
- Code fixes on multiple ezo sensors
2021-02-22 10:40:37 +00:00
Theo Arends 7a911b328f Fix TM1637 driver
Fix TM1637 driver now needs ``TM1637 CLK`` and ``TM1637 DIO`` to enable (#11057)
2021-02-21 12:17:39 +01:00
Norbert Richter 435be84ff3
Add SDM72 Modbus energy meter 2021-02-09 16:13:40 +01:00
Theo Arends bfde36e954 Add fragmentation translations 2021-02-04 15:19:59 +01:00
Norbert Richter 29deb769d4
Move text to lang files 2021-01-20 14:47:58 +01:00
Norbert Richter d4c2282170
Add Sugar Valley NeoPool Controller 2021-01-20 13:56:57 +01:00
Theo Arends 2dbd1ef973 Add support for 24/26/32/34 bit RFID Wiegand
Add support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther (#3647, #10565)
2021-01-16 15:39:33 +01:00
Vic c803670137 BS814A-2 Touch Driver xdrv_52 flavor 2021-01-07 16:39:41 +01:00
Theo Arends 9d0a7e9bc4 Update filesystem GUI 2021-01-06 17:54:03 +01:00
Theo Arends d63c46fe38
Merge branch 'development' into feature/analog-ph-sensor-support 2021-01-06 14:27:41 +01:00
gemu2015 40a440d5f2 change sd card to UFS 2021-01-06 09:53:59 +01:00
Michael Kolb f09108d449 Review comments: Shortened i18n strings 2021-01-05 17:25:08 +01:00
Michael Kolb 0b90dd7314 Took care of all languages 2021-01-05 14:46:56 +01:00
Theo Arends 928f6f9447 Prep SPI SDCard support 2021-01-04 15:03:56 +01:00
Theo Arends ee1648d3e0 Prep SSD1331 driver 2021-01-01 16:05:06 +01:00
Theo Arends dcbb3f1e0e Happy New Year 2021-01-01 13:44:04 +01:00
Theo Arends 576a36641a Prep individual SPI CS selection 2020-12-29 12:06:47 +01:00
Vic 025be48d4b fixed a typo in languages 2020-12-22 20:51:03 +01:00
Theo Arends 59992d1954 Add support for FTC532 8-button touch controller
Add support for FTC532 8-button touch controller by Peter Franck (#10222)
2020-12-22 16:47:24 +01:00
Stephan Hadinger f94b75d150 Zigbee add unishox strings 2020-12-21 09:56:04 +01:00
Theo Arends dcfb74f457 Support for GPIO option selection
- Support for GPIO option selection
- Gpio ``Option_a1`` enabling PWM1 high impedance if powered off and no fading as used by Wyze bulbs (#10196)
2020-12-20 13:22:01 +01:00
Theo Arends 0a7d441e65 Add support for P9813 RGB Led MOSFET controller
Add support for P9813 RGB Led MOSFET controller (#10104)
2020-12-17 16:33:26 +01:00
Theo Arends 0614906e03 Prep RC522 rfid reader 2020-11-30 12:52:59 +01:00
Theo Arends 4d8191d6b0 Refactor file upload 2020-11-19 15:43:47 +01:00
Theo Arends c02770ce96 Add support for Shelly Dimmer 1 and 2
Add support for Shelly Dimmer 1 and 2 by James Turton (#9854)
2020-11-14 16:43:32 +01:00
Theo Arends 4b6465fd10 Add support for fingerprint sensor
Add support for AS608 optical and R503 capacitive fingerprint sensor
2020-11-11 17:31:48 +01:00
Theo Arends 3334fe58ed Prep AS608/R503 FIngerprint sensor support 2020-11-10 15:04:45 +01:00
Christopher Tremblay 959e734924 Add support for EZO PMP
Adds support for EZO Peristaltic pump
2020-11-07 01:41:22 -08:00
Christopher Tremblay 2af5f61b03 Add support for EZO DO
Add support for EZO Disolved Oxygen sensor
2020-11-02 00:26:35 -08:00
Christopher Tremblay 558034b15f Add support for EZO FLO sensor
Add support for EZO FLO sensor
2020-11-01 01:28:43 -08:00
Christopher Tremblay db338f1d81 Add support for EZO O2
Adds support for EZO O2 sensor
2020-10-27 03:38:54 -07:00
Christopher Tremblay 3ec4246bbe Merge branch 'development' of https://github.com/arendst/Tasmota into development 2020-10-24 00:55:51 -07:00
Christopher Tremblay d6bea107f8 Add support for EZO EC
Adding support for Electrical conductivity sensor
2020-10-24 00:54:25 -07:00
Theo Arends 0f805014e6 Support WT32-ETH01
- Support for fixed output Hi or Lo GPIO
- Support for ESP32 based Wireless-Tag WT32-ETH01 (#9496)
2020-10-23 15:18:58 +02:00
Christopher Tremblay bb210bd33a Added mV for all languages
I was missing the defines for mV for all languages :(.  I added default placeholders
2020-10-18 05:51:21 -07:00
Christopher Tremblay 46df6d5a52 Added deafult localized strings for pH & ORP
Added default strings for pH & ORP to all languages
2020-10-18 05:43:40 -07:00
Theo Arends 330109d67c Add optional support for Orno WE517
Add optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353)
2020-10-02 16:37:43 +02:00
Theo Arends 760d702fd0 Add optional support for Mitsubishi Electric HVAC
Add optional support for Mitsubishi Electric HVAC by David Gwynne (#9237)
2020-10-02 15:10:21 +02:00
device111 994081430c AS3935 Refactor
- Fix Autodisturber
- Fix Event IRQ Flicker when calibrating and on Start up
- Add command `power` on/off
- Add command `noirqevent` (suppress IRQ with no event)
- Add Info Log when no Pin defined
- Add Info Log when SCO and TCO Calibration Fails
- optimize Autotune Caps
- new init procedure (Reset before Start)
- save 128 Bytes of Ram
- update language files
2020-09-03 09:37:10 +02:00
Theo Arends 73e49803cc Add better Zigbee firmware Upload Transfer GUI 2020-09-01 13:05:46 +02:00
Theo Arends e2bd24059a Prep update MAX31865 driver 2020-08-23 12:24:35 +02:00
Janusz 5536e03423 add DYP ME007 ultrasonic distance sensor 2020-08-16 22:49:16 +02:00
Stephan Hadinger b0188642b1 Change triple-mode TLS via configuration in a single firmware (TLS AWS IoT, Letsencrypt and No-TLS) 2020-08-12 17:20:37 +02:00
Charles 0d36f5bda8 Added Denky Teleinfo 2020-08-10 17:42:31 +02:00
Theo Arends 0b4197232e Add firmware upload state message to GUI 2020-08-08 13:18:39 +02:00
Theo Arends ce388c799f Add ESP32 Analog input support for GPIO32 to GPIO39 2020-08-04 16:33:05 +02:00
Theo Arends d8c4240656 Prep Zigbee reset GPIO 2020-07-22 10:07:07 +02:00
Marius Bezuidenhout 277df060dd Schneider iEM3xxx Modbus feature
Feature to read modbus data from Schneider Electric iEM energy monitor devices
2020-07-12 17:52:24 +02:00
Theo Arends a63604bd10 Add Battery status to Zigbee GUI
Add Battery status to Zigbee GUI
2020-06-29 11:53:31 +02:00
ascillato 98798d4c11 KNX: Add Scene Translation Keys 2020-06-18 15:25:59 -03:00
Theo Arends c533eb1186 BLM certify part 2
- Change define USE_TASMOTA_SLAVE into USE_TASMOTA_CLIENT
- Change commands ``SlaveSend`` and ``SlaveReset`` into ``ClientSend`` and ``ClientReset``
2020-06-18 16:05:55 +02:00
Justifiably a4846c10fd Add D_SENSOR_LMT01_PULSE to language files. 2020-06-17 15:17:28 +01:00
Charles fae80fc9dc
Merge branch 'development' into teleinfo 2020-06-16 19:04:39 +02:00
Theo Arends 715697cb32 Add ESP32 ethernet commands
Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3`` (#8503)
2020-06-16 18:36:49 +02:00
Charles 3b8c83deb1
Merge branch 'development' into teleinfo 2020-06-15 22:29:53 +02:00
Stephan Hadinger 2181b0c1a4 Add serial to TCP bridge, ``TCPStart`` and ``TCPBaudRate`` (needs #define USE_TCP_BRIDGE) 2020-06-15 19:22:56 +02:00
Charles 4afbbca773 Added French Smart Meter Teleinformation 2020-06-12 16:28:57 +02:00
Theo Arends c6fede2bf4 Basic support for BL0940
Basic support for BL0940 (#8175)
2020-06-07 17:21:29 +02:00
Theo Arends d7f6c78ed9 Add command ``DeviceName``
Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI
2020-05-17 17:10:17 +02:00
gemu2015 d182817892 add psram to info page ESP32 2020-05-12 14:19:10 +02:00
Mickael Gaillard b6165d5a18 Add Translate Fahrenheit
Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>
2020-05-08 00:53:13 +02:00
Mickael Gaillard 2ddfb2da07 Add extra translate
Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>
2020-05-08 00:34:25 +02:00
Theo Arends cb1b7739b6
Merge branch 'development' into new-windmeter-sensor 2020-05-07 14:58:23 +02:00
Yury Sannikov 049ddad17b update languages 2020-05-07 11:54:29 +03:00
Matteo Albinola a3455f235b Merge branch 'development' into new-windmeter-sensor
# Conflicts:
#	tasmota/language/bg_BG.h
#	tasmota/language/cs_CZ.h
#	tasmota/language/de_DE.h
#	tasmota/language/el_GR.h
#	tasmota/language/en_GB.h
#	tasmota/language/es_ES.h
#	tasmota/language/fr_FR.h
#	tasmota/language/he_HE.h
#	tasmota/language/hu_HU.h
#	tasmota/language/it_IT.h
#	tasmota/language/ko_KO.h
#	tasmota/language/nl_NL.h
#	tasmota/language/pl_PL.h
#	tasmota/language/pt_BR.h
#	tasmota/language/pt_PT.h
#	tasmota/language/ro_RO.h
#	tasmota/language/ru_RU.h
#	tasmota/language/sk_SK.h
#	tasmota/language/sv_SE.h
#	tasmota/language/tr_TR.h
#	tasmota/language/uk_UA.h
#	tasmota/language/zh_CN.h
#	tasmota/language/zh_TW.h
2020-05-06 21:33:07 +02:00
Mickael Gaillard d54dcec303 Custom configuration tntegration on core
Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>
2020-05-06 21:30:36 +02:00
Theo Arends 93ac75a5aa Prep ESP32 Webcam for user template 2020-05-05 18:36:12 +02:00
Theo Arends 50614a18b5 Rename language files to fix compilation error 2020-05-05 17:09:48 +02:00