7ecc752c11
Remove command SetOption2
2019-10-22 18:34:41 +02:00
b072791426
Bump version 6.6.0.21
...
* Remove support for WPS and SmartConfig in favour of Web server (!) based WifiManager (#6680 )
* Remove binary sonoff-classic (#6680 )
2019-10-22 16:34:25 +02:00
1d5920d1c8
Add ArduinoSlave Driver
2019-10-20 20:14:17 +02:00
833845e602
Add ZigbeeRead command and many improvements ( #6095 )
2019-10-20 16:43:50 +02:00
4e45e660f2
Add support for EX-Store WiFi Dimmer V4
...
Add support for EX-Store WiFi Dimmer V4 (#5856 )
2019-10-18 17:29:19 +02:00
9f55ab6a2a
Add absolute PowerDelta
...
Add absolute PowerDelta using command PowerDelta 101..32000 where 101 = 101-100 = 1W, 202 = 202-100 = 102W (#5901 )
2019-10-18 16:53:30 +02:00
84fe7b8e76
Bump version to 6.6.0.20
...
Add command SetOption65 0/1 to disable (1) fast power cycle detection fixing unwanted brownout trigger
2019-10-18 15:18:39 +02:00
9a03d831a6
Remove old SDM120 and SDM630 drivers
...
* Replace obsolete xsns_23_sdm120 with xnrg_08_sdm120 and consolidate define USE_SDM120
* Replace obsolete xsns_25_sdm630 with xnrg_10_sdm630 and consolidate define USE_SDM630
* Replace obsolete xsns_49_solaxX1 with xnrg_12_solaxX1 (#6677 )
2019-10-18 12:28:29 +02:00
cd10e84ecf
Change Sonoff L1 support
2019-10-17 12:20:26 +02:00
bbab803985
Added PMS3003 support
...
Added PMS3003 support on documentation (forgot on the first commit)
2019-10-16 12:38:56 +02:00
fb428a9c7d
Remove default DS18B20 driver
...
Remove default DS18B20 driver and only support define DS18x20 (#6647 )
2019-10-16 11:51:38 +02:00
e1448edb25
add Web UI for PWM multi channel (Option68)
2019-10-15 16:41:53 +02:00
c858710aef
fix pwm multi channel (Option68)
...
With Option68 enabled, the pwm channels are independent. The channel
setting code was indirectly using setRGB and setCW. Those methods
recalculate the channel values to adjust for brightness, thereby
modifying the channel values.
This change add raw channel set/get methods that do not modify the
channels values and uses those when pwm_multichannel is in effect.
2019-10-15 16:41:43 +02:00
ee2519070f
Add rule support after every command execution
...
* Add incremental beeps to Ifan03 remote control fan speed buttons (#6636 )
* Add rule support after every command execution like Fanspeed#Data=2 (#6636 )
2019-10-15 16:23:37 +02:00
3ff1bcd64c
Add define USE_SONOFF_RF
...
Add define USE_SONOFF_RF to enable/disable Sonoff Rf support (#6648 )
2019-10-15 15:37:22 +02:00
5527f424a0
Add deep sleep support
...
Add define USE_DEEPSLEEP and command DeepSleepTime 0 or 10..86400 (seconds) to enter deepsleep mode (#6638 )
2019-10-14 16:12:59 +02:00
5f08aef5f7
Fix Rules were not triggered with IR unknown protocol or in sonoff-it ( #6629 )
2019-10-13 22:16:13 +02:00
0092bf766c
Add Zigbee additional commands and sending messages to control devices ( #6095 )
2019-10-13 12:56:52 +02:00
01f6df9161
Add DimmerRange command and support longer dimmer ranges. Fixes #6605
...
More and more serial dimmers are coming up with different dimming ranges, implemented DimmerRange command to make this setting generic and bring support for 2 byte dimming ranges which isn't supported by SetOptions.
2019-10-10 15:53:01 +01:00
9add6f8d7d
Add command Gpio 255
...
Add command Gpio 255 to show physical GPIO configuration of all non-flash pins (#6407 )
2019-10-10 12:26:00 +02:00
0f72a93170
Add command SetOption34 0..255 to set backlog delay
...
Add command SetOption34 0..255 to set backlog delay. Default value is 200 (mSeconds) (#6562 )
2019-10-09 17:52:52 +02:00
fd2f204e81
Finish light driver redesign
...
Finish light driver redesign
2019-10-08 18:05:02 +02:00
6d31608fe0
Fix PZEM default address and detection
...
* Change PZEM004T default address mask from 0.0.0.x to 192.168.1.x for legacy reason (#6585 )
* Fix PZEM004T, PZEMAC and PZEMDC autodetection (#6585 )
2019-10-08 13:18:10 +02:00
58da51be1c
Fix better handling of PWM White Temperature mode for Module 48 ( #6534 )
2019-10-06 20:34:35 +02:00
cccd777967
Add Zigbee tracking of connected devices and auto-probing of Manuf/Model Ids
2019-10-06 12:40:58 +02:00
dea8f03459
Add command SetOption72
...
Add command SetOption72 0/1 to switch between software (0) or hardware (1) energy total counter (#6561 )
2019-10-06 11:43:01 +02:00
2d194f427f
Add support for SM2135
...
Add support for SM2135 as used in Action LSC Smart Led E14 (#6495 )
2019-10-04 16:45:05 +02:00
0580ceb0b6
Add support for Chint DDSU666 Modbus energy meter
...
Add support for Chint DDSU666 Modbus energy meter by Pablo Zerón
2019-10-03 14:18:04 +02:00
cbb3f9e0af
Change command PulseTime JSON message
...
Change command PulseTime JSON message format and allow display of all pulsetimer information (#6519 )
2019-10-03 10:02:57 +02:00
913a809242
Bump version 6.6.0.15
...
Bump version 6.6.0.15
2019-10-03 09:58:23 +02:00
bc55237154
Fix domoticz core 2.3.0 compilation error
...
Fix domoticz core 2.3.0 compilation error
2019-10-02 17:39:27 +02:00
7735f95058
Merge branch 'development' into serial_iarm_send
2019-10-02 17:33:51 +02:00
8c34b9edbd
Change command handling
...
* Change command SetOption43 to make it more general. Now supports PS_16_DZ driver too (#6547 )
* Change command handling by moving buffers up in chain solving MQTTlog support (#6524 )
* Change detection of non-MQTT commands by allowing non-space characters as delimiter (#6540 )
2019-10-02 16:45:53 +02:00
37fc7d2259
Add command SetOption71 for DDS238-2
...
Add command SetOption71 0/1 to switch between different Modbus Active Energy registers on DDS238-2 energy meters (#6531 )
2019-10-02 11:24:51 +02:00
838e571d10
Fix TasmotaSerial: move serial send to IRAM for high speed baud rates
2019-10-01 22:58:08 +02:00
aa5b5e891e
Add initial support for PCF8574 I2C I/O Expander
...
Add initial support for PCF8574 I2C I/O Expander (currently output only) by Stefan Bode
2019-10-01 16:33:39 +02:00
26fc172df4
Update _changelog.ino
2019-10-01 08:54:44 +02:00
b38a8bd8eb
MCP230xx - Add sensor29 pin,1 and sensor29 pin,0
...
MCP230xx - Add sensor29 pin,1 and sensor29 pin,0 as an alternative to sensor29 pin,ON and sensor29 pin,OFF respectively.
2019-09-30 17:26:07 +02:00
e40475b563
Add initial support for shutters
...
Add initial support for shutters by Stefan Bode (#288 )
2019-09-29 18:00:01 +02:00
d86cd34905
Add Zigbee more support - collect endpoints and clusters, added ZigbeeDump command
2019-09-29 15:38:26 +02:00
b7aa3cd884
Add initial support for MQTT logging
...
Add initial support for MQTT logging using command MqttLog <loglevel> (#6498 )
2019-09-27 18:13:00 +02:00
3eb219ccaa
Remove support for define USE_DS18x20_LEGACY
...
Remove support for define USE_DS18x20_LEGACY and legacy DS18x20 driver (#6486 )
2019-09-25 14:35:37 +02:00
5bd19d54db
Change command Tariffx to allow time entries like 23 (hours), 1320 (minutes) or 23:00
...
Change command Tariffx to allow time entries like 23 (hours), 1320 (minutes) or 23:00. NOTE: As this is development branch previous tariffs are lost! (#6488 )
2019-09-25 14:24:49 +02:00
6ad2d3b86f
Bump version 6.6.0.14
...
Bump version 6.6.0.14
2019-09-25 14:17:20 +02:00
181ac5539b
Add JSON array index support to rules
...
Add JSON array index support to rules evaluation allowing trigger on ENERGY#POWER[2]>0.60 from JSON ..,"Power":[0.00,0.68],.. (#6160 )
2019-09-22 16:14:34 +02:00
957272dca4
Bump version to 6.6.0.13
...
* Add command EnergyReset4 x,x to initialize total usage for two tarrifs
* Add command EnergyReset5 x,x to initialize total export (or production) for two tarrifs
* Add command Sensor34 8,0 and Sensor34 8,1 to disable/enable JSON message on weight change over 4 gram
2019-09-22 12:53:15 +02:00
7b70c042bd
Add command ModuleAddress 1/2/3
...
Add command ModuleAddress 1/2/3 to set Pzem module address when a single module is connected (#2315 )
2019-09-16 16:56:16 +02:00
26361bd8c3
Add driver USE_SDM630_2
...
Add driver USE_SDM630_2 as future replacement for USE_SDM630 - Pls test and report
2019-09-15 17:06:23 +02:00
36d1f51a82
Add initial support for up to three PZEM-003/-017
...
Add initial support for up to three PZEM-003/-017 on serial modbus connection with addresses 1 (default), 2 and 3 (#2315 )
2019-09-15 16:02:00 +02:00
7e192cf624
Add initial support for up to three PZEM-004T
...
Add initial support for up to three PZEM-004T on serial connection with addresses x.x.x.1 (default), 2 and 3 (#2315 )
2019-09-15 15:40:18 +02:00
Theo Arends
andrethomas
Stephan Hadinger
Vasco Baptista
Andreas Schultz
Shantur Rathore