Theo Arends
28631a7bc3
Merge pull request #8624 from gemu2015/scripter-update
...
scripter update, eeprom support
2020-06-06 08:24:35 +02:00
Stephan Hadinger
0bfb79e694
Fix Zigbee Time and add TimeEpoch
2020-06-05 22:27:47 +02:00
gemu2015
9987b3f2d5
scripter update, eeprom support
2020-06-05 20:15:16 +02:00
Stephan Hadinger
0ebcbc76dc
Fix wrong sign of attributes
2020-06-05 18:24:31 +02:00
Theo Arends
9d86c15685
Some webserver code saving
2020-06-05 11:53:53 +02:00
Janusz Kostorz
c20bb9ab58
increasing in color temperature change speed
2020-06-04 22:27:30 +02:00
Theo Arends
dac14073c9
Fix windmeter interrupt service routine
...
Fix windmeter interrupt service routine (#8614 )
2020-06-04 12:28:01 +02:00
Theo Arends
41f77f688c
Add command ``SetOption94 0/1``
...
Add command ``SetOption94 0/1`` to select MAX31855 or MAX6675 thermocouple support (#8616 )
2020-06-04 11:36:58 +02:00
Theo Arends
676a13f0c2
Merge pull request #8616 from aik/development-v2
...
Add MAX6675 sensor (v2)
2020-06-04 09:40:58 +02:00
Alexey Kardashevskiy
5558da527a
Add MAX6675 sensor
...
This is basically a cut down version of MAX31855 without reference
temperature reading and lower resolution (only positive, 12bit only).
This implements 16bit protocol (31855 uses 32bit). SetOption94 enables
the new behavior.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
Changes:
v2:
* treat occasional 0xfff as an error
* do not add new sensor pins, use SetOption94 instead
2020-06-04 10:00:00 +10:00
Stephan Hadinger
45397293e1
Add Zigbee auto-responder for common attributes
2020-06-03 22:39:04 +02:00
Theo Arends
f035932c74
Change BH1750 indexes to I2C address
2020-06-03 15:12:23 +02:00
m-hume
3748bb2121
Label sensors with hex address
2020-06-03 13:06:01 +01:00
Theo Arends
7e8c1368a8
Merge pull request #8606 from halfbakery/support_switches_with_ac_detection
...
Add support for switches using an AC detection circuitry
2020-06-03 13:37:49 +02:00
Theo Arends
61b47e345d
Merge pull request #8605 from device111/development
...
AS3935, add stage to json, fix overwrite nf-floor
2020-06-02 22:26:32 +02:00
halfbakery
6dd50a394c
Add support for switches using an AC detection circuitry
2020-06-02 22:17:20 +02:00
device111
f10ed3261c
AS3935, add stage to json, fix overwrite nf-floor
2020-06-02 19:13:06 +02:00
Jason2866
006af71803
no need for HueEmulation for core 2.4.2
...
anymore. Out of support.
2020-06-02 17:35:25 +02:00
Theo Arends
679fad6bb9
Merge pull request #8600 from device111/development
...
fix VEML7700 MQTT white value message and I2C detect
2020-06-02 12:36:08 +02:00
device111
57639d9524
fix VEML7700 MQTT white value message and I2C detect
2020-06-02 12:24:29 +02:00
Theo Arends
e57bbb2b7d
Some code refactoring
2020-06-02 12:09:31 +02:00
device111
05a2c3c164
correction of BUILS.md and mcp9808 Domoticz index
2020-06-02 11:34:25 +02:00
device111
8c29ead09d
Add support for up to eight MCP9808 temperature sensors
2020-06-02 08:35:49 +02:00
device111
965c2ae807
add 2 commands for VEML7700 Sensor (gain, integration time); value normalizing activated
2020-06-01 18:48:08 +02:00
device111
0fd566846b
update de language for illuminance for a "more" German Word
2020-06-01 18:43:53 +02:00
Theo Arends
eafaccfcda
Add support for up to two BH1750 sensors
...
Add support for up to two BH1750 sensors controlled by commands ``BH1750Resolution`` and ``BH1750MTime`` (#8139 )
2020-06-01 18:00:56 +02:00
Theo Arends
e397aaae0e
Merge pull request #8592 from device111/development
...
fix start without stop condition
2020-06-01 15:50:30 +02:00
gemu2015
f1a2fb2b8d
fix serial buffer issues
2020-06-01 15:17:32 +02:00
device111
917124af26
fix start without stop condition
2020-06-01 11:51:57 +02:00
Theo Arends
e4e9a39c79
Merge pull request #8589 from halfbakery/cleanup_undocumented_switch_debounce_feature
...
Make a previously undocumented switch debouncing feature clean and official
2020-05-31 16:37:54 +02:00
Theo Arends
b97e7cd1e4
Fix Sonoff Dual Buttons
...
Fix Sonoff Dual Buttons (#8560 )
2020-05-31 16:28:02 +02:00
halfbakery
72014b7773
Make a previously undocumented switch debouncing feature clean and official
2020-05-31 12:46:15 +02:00
Theo Arends
1ddf65e88c
Merge pull request #8582 from gemu2015/scripter-fix
...
Scripter fix + little fs support
2020-05-30 15:51:31 +02:00
gemu2015
54806fd527
files system update
2020-05-30 15:29:47 +02:00
Theo Arends
29070f1136
Add ``CpuFrequency`` and ``FlashFrequency`` to status 0
...
- Add ``CpuFrequency`` to ``status 2``
- Add ``FlashFrequency`` to ``status 4``
2020-05-30 14:59:52 +02:00
Theo Arends
9c0fc4edcd
Merge pull request #8581 from Staars/touch
...
Command interface for touch button driver and a serial plotter
2020-05-30 14:23:45 +02:00
Staars
7e28e03d78
add commands to touch pin button on ESP32
2020-05-30 13:50:22 +02:00
gemu2015
7f1514e6da
some fixes and optimizations
2020-05-30 10:48:12 +02:00
Theo Arends
ff39bcf004
Merge pull request #8579 from device111/development
...
AS3935 - fix Min stage init settings
2020-05-30 09:13:00 +02:00
Theo Arends
c0fa63ee3c
Merge pull request #8574 from pcdiem/device-groups-13
...
Fix SO88 incoming relay state check
2020-05-30 08:20:15 +02:00
Theo Arends
01d92ca3a2
Merge pull request #8573 from randocollaboration/development
...
Add ability to toggle displayed temperature unit on Xiaomi LYWSD02
2020-05-30 08:19:36 +02:00
Paul C Diem
3d42fae8bd
Fix SO88 incoming power state check
2020-05-29 18:55:33 -05:00
device111
16aa38be49
fix Min stage settings
2020-05-30 01:05:10 +02:00
rando-calrissian
ce3dfd1066
Add files via upload
...
Added ESP32 support for changing the displayed temperature unit on LYWSD02 BLE device
2020-05-29 15:41:49 -07:00
Stephan Hadinger
b069b89561
Add Zigbee options to ``ZbSend`` to write and report attributes
2020-05-29 22:52:45 +02:00
rando-calrissian
10e059c363
Add files via upload
...
Added the ability to set the displayed temperature units (C/F) for Xiaomi LYWSD02 devices.
2020-05-29 11:18:39 -07:00
gemu2015
357341899c
ILI9488 ESP32
2020-05-29 19:29:03 +02:00
Stephan Hadinger
0327c4a547
Udp fix for ESP32
2020-05-27 23:52:25 +02:00
Stephan Hadinger
c65a3dfba7
Fix compilation issue
2020-05-27 20:48:40 +02:00
Stephan Hadinger
3a1155f2b6
reduce footprint of multicast udp listener
2020-05-27 19:42:43 +02:00
Theo Arends
0dc0eda274
Merge pull request #8562 from Staars/touch
...
Touch pin as button for ESP32
2020-05-27 17:29:24 +02:00
Staars
fb23aa41c2
do not break gpio configs
2020-05-27 16:52:44 +02:00
Staars
55e56fee43
Touch pin as button for ESP32
2020-05-27 15:59:32 +02:00
gemu2015
77c60229cc
ESP32 support for SSD1351
2020-05-27 11:14:17 +02:00
Paul C Diem
bc6d7ceb87
Add support for SetOption88 to put each relay in a separate device groups
2020-05-26 22:07:25 -05:00
Theo Arends
8539021c92
Merge pull request #8554 from Staars/mi32
...
update xsns_62_MI_ESP32.ino (and NimBLE-Arduino)
2020-05-26 22:29:05 +02:00
Staars
9f8d0fcd85
update driver
2020-05-26 20:44:40 +02:00
Theo Arends
32a39b828c
Merge pull request #8553 from phjr/fix-device-power-on-esp8266
...
fix default power state logic invoked even if already serviced by a d…
2020-05-26 18:31:32 +02:00
Peter Halicky
f80d2ede3a
fix default power state logic invoked even if already serviced by a driver
2020-05-26 18:20:46 +02:00
Theo Arends
371870a826
Fix ESP32 GUI template upload
...
Fix ESP32 GUI template upload (#8534 )
2020-05-26 17:38:34 +02:00
Theo Arends
66233b1749
Add support for full MAC address
...
Add support for unique MQTTClient (and inherited fallback topic) by full Mac address using ``mqttclient DVES_%12X`` (#8300 )
2020-05-26 17:08:13 +02:00
Theo Arends
12391c30a7
Relax NTP: Not synced message
2020-05-26 14:43:21 +02:00
Theo Arends
a3964d1679
Add NTP: Not synced message
...
Add NTP: Not synced message (#8142 )
2020-05-26 14:38:31 +02:00
Theo Arends
bacb730b53
Fix escape of non-JSON received serial data
...
Fix escape of non-JSON received serial data (#8329 )
2020-05-26 12:35:21 +02:00
Theo Arends
ed543d93c3
Merge pull request #8529 from abmaonline/encode-json
...
Encode json string from serial to mqtt
2020-05-26 12:25:58 +02:00
Theo Arends
7bfbe95d0f
Update tasmota.h
2020-05-26 12:15:20 +02:00
Theo Arends
78f106ccb7
Fix Time 0 NTP sync
2020-05-26 11:50:35 +02:00
Theo Arends
b3540879ab
Zero fill millis positions to three digits
2020-05-26 10:26:41 +02:00
Theo Arends
b12dbb893c
Add info text on cam init
2020-05-25 17:52:31 +02:00
Theo Arends
2e88ced738
Fix exception due to webcam problem
...
Fix exception due to webcam problem (#8534 )
2020-05-25 17:25:47 +02:00
gemu2015
c1979cbd18
fix >W section bug, some refactoring
2020-05-25 15:49:03 +02:00
Theo Arends
90d3cd45c4
Add command ``Time 4``
...
Add command ``Time 4`` to display timestamp using milliseconds (#8537 )
2020-05-25 11:44:17 +02:00
Theo Arends
c333b67669
Fix DisplaySevenSegment compilation error
2020-05-25 10:21:36 +02:00
Norbert Richter
eb6de53628
Fix setting addr typo
2020-05-24 20:07:25 +02:00
Matthijs Abma
721c2c8f7f
Reduce input buffer so hex/json encoded content always fits
2020-05-24 17:47:57 +02:00
Matthijs Abma
7210934774
Cleanup code and only allocate buffer when needed
2020-05-24 17:47:57 +02:00
Matthijs Abma
a4ce4830e8
Encode content when not raw or json
2020-05-24 17:47:57 +02:00
Theo Arends
a5130fa2e4
Merge pull request #8517 from abmaonline/send-on-full-buffer
...
Send all chars from serial to mqtt
2020-05-24 12:03:28 +02:00
Theo Arends
6073bd9eb6
Update changelog
2020-05-24 11:55:39 +02:00
Theo Arends
43b999600e
Merge pull request #8520 from peteakalad/peteakalad-SGP30_Sensor_Fixes
...
SGP30 Sensor Fixes #8519
2020-05-24 11:19:57 +02:00
Stephan Hadinger
fe045c3c9d
Fixed description of file
2020-05-24 10:00:32 +02:00
Stephan Hadinger
f5f1bdefdb
Add wildcard patter for JSON marching in rules using ``?`` pattern
2020-05-24 09:57:11 +02:00
peteakalad
11cb3e838c
Fix for SGP30 for Abs Humidity on Web UI
2020-05-23 22:41:50 +01:00
Matthijs Abma
7f18e1e8e3
Split logic for adding char to buffer and sending
...
the buffer, to make sure the char doesn't get
lost when the buffer is full
2020-05-23 17:44:49 +02:00
Matthijs Abma
2626345662
Store if current byte is delimiter for later reuse
2020-05-23 17:44:49 +02:00
Theo Arends
ca8b38d0d0
Add LedPwm commands
...
Add commands ``LedPwmOn 0..255``, ``LedPwmOff 0..255`` and ``LedPwmMode1 0/1`` to control led brightness by George (#8491 )
2020-05-23 15:17:13 +02:00
Theo Arends
aafa0862ab
Refactor LedPwm code
2020-05-23 13:09:16 +02:00
Theo Arends
dc9ce42888
Refactor LedPwm code
2020-05-23 13:04:17 +02:00
Theo Arends
924a8772e1
Merge branch 'development' into ledpowerpwm
2020-05-23 12:46:51 +02:00
Theo Arends
d0de78352f
Fix Energy Frequency display
2020-05-23 12:15:14 +02:00
gemu2015
2eccc09086
remove unishox def
2020-05-23 10:36:19 +02:00
gemu2015
584b3c2ef8
scripter update
...
add direct access to some energy registers and sml registers
make google charts optional #define USE_GOOGLE_CHARTS
2020-05-23 10:24:08 +02:00
Theo Arends
8db2489f59
Merge pull request #8510 from s-hadinger/unishox_wemo_dev
...
Compressed string in Wemo emulation
2020-05-23 10:10:20 +02:00
Stephan Hadinger
02faa2ea49
Fix style and compilation error when no compression
2020-05-23 10:05:57 +02:00
George
e780f25283
Gamma correction
...
Implement changes proposed by @s-hadinger review.
* Use 0-255 range in settings
* Apply gamma correction from xdrv_light & use changuintscale helper fn (as per pwm light routine)
2020-05-23 17:13:04 +10:00
Stephan Hadinger
6154fd1015
Fixed compilation error
2020-05-22 23:05:55 +02:00
Stephan Hadinger
45b83a8c77
Compression candidates for Hue emulation
2020-05-22 22:54:34 +02:00
Stephan Hadinger
7ee9b2d34d
Compressed string in Wemo emulation
2020-05-22 22:14:17 +02:00
Theo Arends
93ca102391
Change ExportActiveTariff to ExportTariff
2020-05-22 18:31:14 +02:00
Theo Arends
855e054db8
Change Energy JSON data
...
- Bump version 8.3.1.2
- Change Energy JSON Total field from ``"Total":[33.736,11.717,16.978]`` to ``"Total":33.736,"TotalTariff":[11.717,16.978]``
- Change Energy JSON ExportActive field from ``"ExportActive":[33.736,11.717,16.978]`` to ``"ExportActive":33.736,"ExportActiveTariff":[11.717,16.978]``
- Add Three Phase Export Active Energy to SDM630 driver
2020-05-22 17:48:21 +02:00
Theo Arends
86921e60b2
Add support for VEML6075 and VEML7700
...
- Add support for VEML6075 UVA/UVB/UVINDEX Sensor by device111 (#8432 )
- Add support for VEML7700 Ambient light intensity Sensor by device111 (#8432 )
2020-05-22 15:16:01 +02:00
Theo Arends
2b798ff194
Merge pull request #8432 from device111/development
...
Support for VEML6075 and initial Support for VEML7700
2020-05-22 14:38:20 +02:00
Stephan Hadinger
c8b5750568
Add dump of compressed rules over 512 chars and unishox decompress fix
2020-05-21 20:12:41 +02:00
Theo Arends
14807254ba
Fix apostrophe regression
2020-05-21 18:03:05 +02:00
Theo Arends
f1205385bd
Fix the GUI display of apostrophe
...
Fix the GUI display of apostrophe in any name (#8489 , #8323 )
2020-05-21 17:49:59 +02:00
Theo Arends
089379ccb6
Merge pull request #8504 from effelle/development
...
HAss force [is_topic_light] for PWM_Dimmer module
2020-05-21 17:47:22 +02:00
Federico Leoni
a068010edf
HAss force [is_topic_light] for Dimmer module
2020-05-21 12:33:57 -03:00
Theo Arends
e5942df57f
Update Change log
2020-05-21 17:06:52 +02:00
Theo Arends
1edc02b64f
Merge pull request #8501 from gemu2015/scripter-fix
...
fix scripter unishox error
2020-05-21 08:36:39 +02:00
Theo Arends
9e804c7ef8
Merge pull request #8500 from pcdiem/pwm-dimmer-11
...
Publish state when dimmer button tapped
2020-05-21 08:36:23 +02:00
Theo Arends
bae652280d
Merge pull request #8499 from effelle/development
...
HAss: Fix slider for PWM_MODULE
2020-05-21 08:35:53 +02:00
Theo Arends
f3a577d0fc
Merge pull request #8497 from arijav/new_branch
...
Update thermostat controller with 2 new commands
2020-05-21 08:35:26 +02:00
gemu2015
fca5dc9471
Update xdrv_10_scripter.ino
2020-05-21 08:13:26 +02:00
gemu2015
edaf6c493e
fix scripter unishox error, add 2 y axes line graph to google charts
2020-05-21 06:06:42 +02:00
Paul C Diem
9b519700c1
Publish state when dimmer button tapped
2020-05-20 20:55:02 -05:00
Federico Leoni
5e6010d1d0
Fix slider for PWM_MODULE
2020-05-20 22:11:07 -03:00
Javier Arigita
f880d058ed
Bugfix
2020-05-20 22:21:25 +02:00
Javier Arigita
7b42e6f338
Duty cycle output added, as well as possibility to disable physical output
2020-05-20 22:10:49 +02:00
Stephan Hadinger
b7f932391a
Change IRremoteESP8266 library updated to v2.7.7
2020-05-20 12:42:34 +02:00
George
833d89203f
Fix settings delta fail
...
bugfix - settings always default on boot
*Moved block to right scope
*Got version number right duh
2020-05-20 13:25:11 +10:00
George
603b628f97
Add pwm mode masking
...
* Extra setting & command to set - allows masking of pwm mode. Use case is for leds attached to buttons for seeing at night; this way user can combine both pwm and digital leds (i.e. pwm for the button leds but non-button status leds can stay on/off).
2020-05-20 13:23:54 +10:00
George
e21cbfdc5d
More sensible behaviour
...
* When setting PWM values, updates all the LEDs (instant response). Uses led_power values.
* If LEDLINK not set, but LED1 is, LED1 is the status led. When turning on/off, setledlink uses digitalwrite (which does not respect the new pwm operation). In this case only, we will use the setledpoweridx instead of digitalwrite - costly (every 250ms this runs), but edge case / legacy. Allows more intuitive operation - if we blink an LED with the max and min PWM limits, we'd expect it to respect these. In this case, blink will also now update the led_power status, which keeps this accurate e.g. if ledpower 1 cmnd was sent, then blink occurred, led_state would read a 1 for that bit but the led would be off (but nothing was reading it for status so it didn't cause any trouble). Leaving digitalwrite when LEDLINK is defined as this is more efficient and the use case for pwm leds is to find buttons - link indicator would become more ambiguous for no benefit.
2020-05-20 13:23:53 +10:00
George
bea58f223f
Oops
...
Compile error. Forgot bracket.
2020-05-20 13:23:53 +10:00
George
fb179c27af
Fixes
...
* Setting commands don't update if no data is sent
* Didn't understand how pin mapping worked duh. Fixed.
2020-05-20 13:23:53 +10:00
George
bd33574ee7
Align new settings to 2B boundaries
...
Attempting to fix settings not working correctly (might have mucked up the boundaries and compiler put a padding byte in).
2020-05-20 13:23:53 +10:00
George
ce2696fef0
Fix compile errors
...
Missing brackets and semicolons of course. Blame python.
2020-05-20 13:23:53 +10:00
George
a305f435e8
First pass at led pwm settings
...
* Added settings for ledpwm_on and ledpwm_off with defaults that mimic current digitalwrite function
* Changed ledpoweridx from digitalwrite to analogwrite
* Add commands to change new settings
2020-05-20 13:23:52 +10:00
gemu2015
5921055e2f
scripter update
...
script compression option
more google charts (histogram, tables, gauges)
smal bug fixes
2020-05-19 16:44:01 +02:00
Theo Arends
cd7f719563
Add more functionality to ``Switchmode`` 11 and 12 ( #8450 )
...
Add more functionality to ``Switchmode`` 11 and 12 (#8450 )
2020-05-19 15:52:10 +02:00
Theo Arends
e1fbf64037
Add command ``Rule0``
...
Add command ``Rule0`` to change global rule parameters
2020-05-19 11:15:31 +02:00
Theo Arends
ebbdb28e48
Bump version to 8.3.1.1
2020-05-18 17:06:11 +02:00
Theo Arends
d8d9e334f6
Add ValidTemplate function
2020-05-18 17:02:24 +02:00
bovirus
6c99b89788
Italian language update
2020-05-18 16:17:22 +02:00
Theo Arends
d61c1b001d
Merge pull request #8473 from gemu2015/ra8876_esp32
...
ra8876 esp32
2020-05-18 15:29:52 +02:00
gemu2015
769f69d049
remove debug print
2020-05-18 15:02:27 +02:00
Adrian Scillato
6ab98e5e16
Update Spanish Translation
2020-05-18 09:45:17 -03:00
Theo Arends
9d15381f11
Merge branch 'development' of https://github.com/arendst/Tasmota into development
2020-05-18 14:12:58 +02:00
Theo Arends
7241b9d37c
Prep release 8.3.1
2020-05-18 14:12:44 +02:00
gemu2015
e043788de8
scripter support for google charts in WEBUI
2020-05-18 10:29:32 +02:00
gemu2015
88627a5a41
support for jpeg pictures on color lcds
2020-05-18 10:25:18 +02:00
gemu2015
21656fdd81
ra8876 esp32
2020-05-18 10:19:13 +02:00
Theo Arends
dcde10eac4
Merge pull request #8470 from effelle/development
...
HA Discovery: Oops! New DeviceName
2020-05-17 19:23:02 +02:00
Federico Leoni
950a4dc998
HA Discovery: Oops! New DeviceName
2020-05-17 13:42:14 -03:00
Stephan Hadinger
1460f81490
Zigbee allow zero shortaddr
2020-05-17 18:33:42 +02:00
Theo Arends
80ad999a38
Merge pull request #8468 from s-hadinger/unishox_class
...
Unishox code optimized
2020-05-17 18:24:00 +02:00
Stephan Hadinger
20b2257c8c
Unishox code optimized
2020-05-17 18:05:17 +02:00
Theo Arends
4e38cb7ba9
Allow empty DeviceName
2020-05-17 17:55:36 +02:00
Theo Arends
90e833238f
Allow no DeviceName
2020-05-17 17:38:28 +02:00
Theo Arends
d7f6c78ed9
Add command ``DeviceName``
...
Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI
2020-05-17 17:10:17 +02:00
Theo Arends
1c441f9059
Free unused buffer
2020-05-17 12:04:55 +02:00