Theo Arends
4724fa2c49
Add support for DYP ME007
...
Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113 )
2020-08-17 16:25:24 +02:00
Stephan Hadinger
d31e720291
Add Virtual CT for 4 channels lights, emulating a 5th channel
2020-08-15 19:24:57 +02:00
Federico Leoni
612e2be2db
SO59 support for Power0
2020-08-14 11:43:50 -03:00
Theo Arends
18bf102e4f
Prep support for SO114 until SO145
2020-08-13 16:49:11 +02:00
Stephan Hadinger
b0188642b1
Change triple-mode TLS via configuration in a single firmware (TLS AWS IoT, Letsencrypt and No-TLS)
2020-08-12 17:20:37 +02:00
Charles
48a346c443
Added SetOption102 to switch between mode
2020-08-11 19:57:39 +02:00
Theo Arends
f268697e54
Add command ``Restart 2`` to halt system
...
Add command ``Restart 2`` to halt system. Needs hardware reset or power cycle to restart (#9046 )
2020-08-10 16:19:44 +02:00
Theo Arends
1d990ad091
Fix ESP32 PWM range
2020-08-03 11:52:25 +02:00
Theo Arends
ac780d5e9a
Merge pull request #8937 from grob6000/serialsend6
...
Serialsend6 - comma-separated decimal send as binary
2020-07-21 12:23:53 +02:00
Theo Arends
a84ebe552a
Refactor rules processing
2020-07-20 17:24:51 +02:00
George
8a4a0d67ff
serialsend6 - fixes
...
Forgot to fix top condition
2020-07-20 10:08:20 +10:00
George
63242de249
Serialsend6
...
* Adds serialsend6, allowing sending of binary data with comma-delimited string of decimal numbers.
2020-07-19 20:34:43 +10:00
Sammy BAUER
b7c7943b00
ESP32 port: JSON error
...
A double quote is missing in the JSON response of the status command, so the result is not valid for ESP32.
2020-07-14 16:07:35 +02:00
Theo Arends
0315ef3a3c
Add some comments to led commands
2020-07-04 15:40:38 +02:00
Federico Leoni
03db100197
TuyaMCU baud rate
2020-06-29 11:01:55 -03:00
Theo Arends
7dafeb280e
Rename global temp and pressure
...
- Rename global temp and pressure (#8808 , #8810 )
- Fix SGP30 calculation (#8808 )
2020-06-28 12:23:18 +02:00
Theo Arends
ff327106be
Refactor ESP32 support
2020-06-24 15:58:56 +02:00
Theo Arends
7c8b06ce16
Add compile time interlock parameters
...
Add compile time interlock parameters (#8759 )
2020-06-22 22:36:54 +02:00
halfbakery
2e43715343
SwitchDebounce flags should be added to every valid imeout values
2020-06-21 20:46:37 +02:00
Theo Arends
b5f45aa295
Fix ESP32 SPI config
2020-06-20 17:58:21 +02:00
Norbert Richter
9b44a369d8
Fix some json unescapes
2020-06-19 12:33:31 +02:00
Theo Arends
83bbe757db
Add command ``Module2``
...
Add command ``Module2`` to configure fallback module on fast reboot (#8464 )
2020-06-17 14:06:46 +02:00
Theo Arends
ef0b797686
Add basic support for ESP32 ethernet
...
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503 )
2020-06-15 18:27:04 +02:00
Theo Arends
0abfcf1954
Fix global temperature
...
- Fix global temperature use of float solving intermittend power off (#8175 )
- Fix BL0940 power monitoring when powered on but no load present
2020-06-12 16:51:21 +02:00
Theo Arends
56c491050e
Fix AP switch
...
Fix AP switch (#8635 )
2020-06-09 11:25:43 +02:00
Theo Arends
29070f1136
Add ``CpuFrequency`` and ``FlashFrequency`` to status 0
...
- Add ``CpuFrequency`` to ``status 2``
- Add ``FlashFrequency`` to ``status 4``
2020-05-30 14:59:52 +02:00
Staars
7e28e03d78
add commands to touch pin button on ESP32
2020-05-30 13:50:22 +02:00
Theo Arends
90d3cd45c4
Add command ``Time 4``
...
Add command ``Time 4`` to display timestamp using milliseconds (#8537 )
2020-05-25 11:44:17 +02:00
Theo Arends
ca8b38d0d0
Add LedPwm commands
...
Add commands ``LedPwmOn 0..255``, ``LedPwmOff 0..255`` and ``LedPwmMode1 0/1`` to control led brightness by George (#8491 )
2020-05-23 15:17:13 +02:00
Theo Arends
dc9ce42888
Refactor LedPwm code
2020-05-23 13:04:17 +02:00
George
e780f25283
Gamma correction
...
Implement changes proposed by @s-hadinger review.
* Use 0-255 range in settings
* Apply gamma correction from xdrv_light & use changuintscale helper fn (as per pwm light routine)
2020-05-23 17:13:04 +10:00
George
603b628f97
Add pwm mode masking
...
* Extra setting & command to set - allows masking of pwm mode. Use case is for leds attached to buttons for seeing at night; this way user can combine both pwm and digital leds (i.e. pwm for the button leds but non-button status leds can stay on/off).
2020-05-20 13:23:54 +10:00
George
e21cbfdc5d
More sensible behaviour
...
* When setting PWM values, updates all the LEDs (instant response). Uses led_power values.
* If LEDLINK not set, but LED1 is, LED1 is the status led. When turning on/off, setledlink uses digitalwrite (which does not respect the new pwm operation). In this case only, we will use the setledpoweridx instead of digitalwrite - costly (every 250ms this runs), but edge case / legacy. Allows more intuitive operation - if we blink an LED with the max and min PWM limits, we'd expect it to respect these. In this case, blink will also now update the led_power status, which keeps this accurate e.g. if ledpower 1 cmnd was sent, then blink occurred, led_state would read a 1 for that bit but the led would be off (but nothing was reading it for status so it didn't cause any trouble). Leaving digitalwrite when LEDLINK is defined as this is more efficient and the use case for pwm leds is to find buttons - link indicator would become more ambiguous for no benefit.
2020-05-20 13:23:53 +10:00
George
bea58f223f
Oops
...
Compile error. Forgot bracket.
2020-05-20 13:23:53 +10:00
George
fb179c27af
Fixes
...
* Setting commands don't update if no data is sent
* Didn't understand how pin mapping worked duh. Fixed.
2020-05-20 13:23:53 +10:00
George
ce2696fef0
Fix compile errors
...
Missing brackets and semicolons of course. Blame python.
2020-05-20 13:23:53 +10:00
George
a305f435e8
First pass at led pwm settings
...
* Added settings for ledpwm_on and ledpwm_off with defaults that mimic current digitalwrite function
* Changed ledpoweridx from digitalwrite to analogwrite
* Add commands to change new settings
2020-05-20 13:23:52 +10:00
Theo Arends
e1fbf64037
Add command ``Rule0``
...
Add command ``Rule0`` to change global rule parameters
2020-05-19 11:15:31 +02:00
Theo Arends
90e833238f
Allow no DeviceName
2020-05-17 17:38:28 +02:00
Theo Arends
d7f6c78ed9
Add command ``DeviceName``
...
Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI
2020-05-17 17:10:17 +02:00
Theo Arends
80c8bf675c
Publish teleperiod data on command TelePeriod
...
Publish teleperiod data on command ``TelePeriod`` (#2567 )
2020-05-16 17:44:29 +02:00
Theo Arends
af32b3f5e5
Add ESP32 configuration webcam
2020-05-12 15:42:16 +02:00
Theo Arends
02f61a5259
Allow rule processing on single Status command
...
Allow rule processing on single Status command only
2020-05-10 11:10:55 +02:00
Stephan Hadinger
646f76e459
Minor size optimizations
2020-05-06 08:56:09 +02:00
Stephan Hadinger
b07edd1d74
Move constants in PMEM
2020-05-04 20:00:05 +02:00
Theo Arends
99178c2f5d
Merge pull request #8315 from gemu2015/esp32-pwm
...
esp32 initial pwm support
2020-05-01 18:04:43 +02:00
gemu2015
bf29904b7a
esp32 initial pwm support
2020-05-01 17:38:40 +02:00
Theo Arends
5d18ad1c74
Add experimental basic support for ESP32
...
- Add experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt
- Bump version to 8.2.0.6
- This ESP32 upgrade breaks current ESP32 templates
2020-05-01 17:30:09 +02:00
Theo Arends
c0a05e9586
Change ESP32 pin allocation part 3
2020-04-30 18:47:34 +02:00
Theo Arends
ef61668037
Change ESP32 pin allocation part 2
2020-04-29 17:44:03 +02:00
Theo Arends
ae4ec4325d
Change pin handling part 5
2020-04-27 17:16:52 +02:00
Theo Arends
c939077514
Change pin handling part 3
2020-04-27 12:54:07 +02:00
Theo Arends
c9149b53c5
Change pin handling part 1
2020-04-26 17:33:27 +02:00
Theo Arends
104e3c4838
Implement ARRAY_SIZE macro
2020-04-25 11:37:36 +02:00
Theo Arends
c0bc7abeee
Merge pull request #8272 from joerg555/development
...
Nimble no warnig, optimise CommandHandler()
2020-04-25 09:36:29 +02:00
Theo Arends
209c8f4eb7
Merge pull request #8270 from pcdiem/device-groups-10
...
Use defined mcast addr for device groups instead of sharing emuation
2020-04-25 09:35:22 +02:00
Jörg Schüler-Maroldt
4c0a85ba0f
CommandHandler() optimize and maybe security fix
2020-04-25 00:55:39 +02:00
Theo Arends
9ed8e7c254
Fix internal array size checks
2020-04-24 17:39:26 +02:00
Paul C Diem
81a874ec72
Use defined mcast addr for device groups instead of sharing emuation's, Code size reductions
2020-04-24 09:12:43 -05:00
Theo Arends
be1fb3756c
Change ESP32 freeHeap to MaxAllocHeap
2020-04-22 16:07:52 +02:00
Theo Arends
965c44c0a9
Fix shortcut SO response
2020-04-21 10:03:34 +02:00
Theo Arends
6c5e9a89c4
Add command ``SO`` as shortcut for command ``SetOption``
2020-04-21 09:48:27 +02:00
Theo Arends
19796a7f97
Refactor ESP32 code
2020-04-19 16:58:13 +02:00
Theo Arends
e1d7416a36
Add features to ESP32
...
- Decided to support ONLY flash mode DOUT (no software change but allows for RX1/TX1)
- Add GPIO9 (RX1) and GPIO10 (TX1) for hardware serial support
- Add above two GPIOs to template
- Moved basic ADC0 support from GPIO36 to GPIO33
2020-04-18 18:10:41 +02:00
Theo Arends
09599bb4a1
Provide ESP32 base module support
2020-04-17 16:17:01 +02:00
Theo Arends
367658b75b
More ESP32 compatibility
2020-04-16 18:33:26 +02:00
Paul C Diem
b7454d7bd8
Add DevGroupStatus command, Include member add/remove logging
2020-04-15 08:40:18 -05:00
Theo Arends
ba01cb2046
Fix GlobalTemp and GlobalHum
...
Fix GlobalTemp and GlobalHum (#8156 )
2020-04-14 11:58:24 +02:00
Theo Arends
e8f3d1d986
Increase ESP32 compatibility
...
Increase ESP32 compatibility (breaks current ESP32 configuration again!)
2020-04-13 17:45:06 +02:00
device111
20c9a9cadf
Add change global hum and temp with command
2020-04-13 13:26:49 +02:00
Theo Arends
ad1054a6ae
Increase ESP32 compatibility
...
Increase ESP32 compatibility (breaks current ESP32 configuration!)
2020-04-12 18:17:35 +02:00
Theo Arends
93fd5dd618
Add experimental minimal support for ESP32
...
Add experimental minimal support for ESP32 (#8110 )
2020-04-10 18:24:08 +02:00
Theo Arends
03968925eb
Small optimization in Group Topic
2020-04-10 14:38:00 +02:00
Theo Arends
aad1aa0dbd
Fix grpflg regression
...
Fix grpflg regression (#8114 )
2020-04-10 10:38:39 +02:00
Theo Arends
24fa00ad57
Fix grpflg detection
...
Fix grpflg detection (#8095 )
2020-04-09 11:51:39 +02:00
Paul C Diem
9794f12460
Add DevGroupSend command
2020-04-07 13:25:58 -05:00
Paul C Diem
2a367512d7
Add DevGroupName command
2020-04-06 12:29:50 -05:00
Theo Arends
d713468c0c
Add support for longer template names
...
Add support for longer template names
2020-03-29 17:41:31 +02:00
Theo Arends
e5a44e6326
Refactor template
2020-03-28 18:08:43 +01:00
Theo Arends
dbc9f16ffc
Add support for up to four MQTT GroupTopics
...
- Bump version to 8.2.0.2
- Add support for up to four MQTT GroupTopics using the same optional Device Group names (#8014 )
2020-03-28 16:48:36 +01:00
Theo Arends
dad82fc472
Merge pull request #7934 from effelle/development
...
New command: Humidity Offset
2020-03-17 08:47:57 +01:00
Stephan Hadinger
9df5294f12
Moving more strings to PROGMEM
2020-03-16 18:55:58 +01:00
Federico Leoni
5ba26780e9
Humidity Offset
2020-03-16 14:29:55 -03:00
Paul C Diem
322952a54f
Move PWM Dimmer init logic to pre init, Use dimmer_hw_min for PWM, Remote mode fixes
2020-03-14 18:53:09 -05:00
Theo Arends
d26ce074d8
Fix command FriendlyName when no index is given
...
Fix command FriendlyName newname when no index is given
2020-03-13 12:50:27 +01:00
Theo Arends
71d810aac4
Update Tx2x Sensor
...
Update Tx2x Sensor with command SpeedUnit (#7843 )
2020-03-02 15:51:33 +01:00
Theo Arends
9962b311d5
Add support for UDP Group commands
...
Add commands ``SetOption85 0/1`` and ``DevGroupShare`` supporting UDP Group command using ``GroupTopic`` without MQTT by Paul Diem (#7790 )
2020-02-25 12:13:49 +01:00
Paul C Diem
a550fe3ac7
Use newly allocated settings and flag
2020-02-24 16:34:45 -06:00
Paul C Diem
8182d6ef7b
Merge branch 'development' of https://github.com/pcdiem/Tasmota into device-groups
2020-02-21 09:15:47 -06:00
Paul C Diem
f409d7258e
Initial device groups support (power and light)
2020-02-21 09:09:21 -06:00
Theo Arends
6a84899e10
Eliminating call sntp_get_real_time
...
Change display of some date and time messages from "Wed Feb 19 10:45:12 2020" to "2020-02-19T10:45:12"
2020-02-19 15:23:59 +01:00
Theo Arends
af63bb363d
Add support for FiF LE-01MR energy meter
...
Add support for FiF LE-01MR energy meter by saper-2 (#7584 )
2020-02-10 15:18:11 +01:00
Theo Arends
1a074da0b5
Add BootCount Reset Time to Status
...
Add BootCount Reset Time as BCResetTime to ``Status 1``
2020-02-07 12:38:10 +01:00
Theo Arends
45ed0257b6
Better support for Prefix1 equals Prefix2
2020-01-18 16:57:48 +01:00
Theo Arends
a6e95211cc
Add more web page sliders
...
Add web page sliders when ``SetOption37 128`` is active allowing control of white(s)
2020-01-16 14:22:39 +01:00
Theo Arends
338499d8e2
Fix unknown command topic
2020-01-14 16:57:55 +01:00
to-scho
80773f74c7
initialize shutters when interlock is changed
2020-01-12 15:41:51 +01:00
Theo Arends
0e0d8190fa
Change some commands displaying all items
...
Change commands ``Prefix``, ``Ssid``, ``StateText``, ``NTPServer``, and ``FriendlyName`` displaying all items
2020-01-12 13:10:21 +01:00
Theo Arends
8aa9109656
Happy New Year
...
Happy New Year
2019-12-31 14:23:34 +01:00
Theo Arends
df944ed058
Fix Serial initialization regression
...
Fix Serial initialization regression from previous fix
2019-12-29 13:27:48 +01:00
Theo Arends
ab167b0974
Add more crash dump information
2019-12-28 14:54:26 +01:00
Hadinger
4d9c551083
Add WDT crash status
2019-12-28 13:14:51 +01:00
Theo Arends
24aff9b415
Add info to Status 0
...
- Add SerialConfig to ``Status 1``
- Add WifiPower to ``Status 5``
2019-12-27 11:13:22 +01:00
Theo Arends
b66cc3479f
Add support for user defined GUI button text
...
Add commands ``WebButton1`` until ``WebButton16`` to support user defined GUI button text (#7166 )
2019-12-24 17:10:50 +01:00
Theo Arends
ad4a7e91ac
Add support for max 150 characters
...
Add support for max 150 characters in most command parameter strings (#3686 , #4754 )
2019-12-22 15:23:52 +01:00
Theo Arends
aae86a6718
Add fallback functionality
...
Add fallback functionality from next version 7.1.2.7
2019-12-16 15:13:57 +01:00
Theo Arends
72aa161ddd
Extent statistics
2019-12-11 10:49:57 +01:00
Theo Arends
d3673963a2
Add Char Usage Ratio
...
Add Char Usage Ratio for future Settings char redesign
2019-12-09 16:16:21 +01:00
Theo Arends
29d5d68ca0
Redesign Exception reporting
...
Redesign Exception reporting removing exception details from both MQTT info and Status 1. Now consolidated in Status 12 if available.
2019-12-08 13:18:15 +01:00
Theo Arends
f3a5b033c8
Add save call stack in RTC memory in case of crash
...
Add save call stack in RTC memory in case of crash, command ``Status 12`` to dump the stack (#7114 , #5883 )
2019-12-07 18:32:39 +01:00
Theo Arends
2686ccb117
Revert "Merge pull request #7134 from s-hadinger/crashrecorder_rtc"
...
This reverts commit 758b255078
, reversing
changes made to f4993736a5
.
2019-12-07 16:50:10 +01:00
Hadinger
edc2dc5c79
Add save call stack in RTC memory in case of crash
2019-12-07 11:02:37 +01:00
Hadinger
7e1e85eba9
Add save call stack in RTC memory in case of crash
2019-12-07 11:01:48 +01:00
Hadinger
7796714ba0
Change from `Crash` to `Restart -1`
2019-12-07 11:00:32 +01:00
Hadinger
5a0febc64e
Add save call stack in RTC memory in case of crash
2019-12-07 10:41:29 +01:00
Theo Arends
00fd7f2f7c
Bump version to 7.1.2.2
...
Add command ``SerialConfig 0..23`` or ``SerialConfig 8N1`` to select Serial Config (#7108 )
2019-12-06 15:02:05 +01:00
Theo Arends
e150717e95
Restore hardware detection
2019-12-02 10:31:33 +01:00
Theo Arends
1692241b25
Fix lost functionality of GPIO9 and GPIO10
...
- Remove inconsistent hardware detection introduced in version 7.0.0.5
- Fix lost functionality of GPIO9 and GPIO10 on some devices (#7080 )
2019-12-01 19:03:53 +01:00
Theo Arends
0f68ccfe23
Add full exception data to Status 1
2019-11-20 21:49:57 +01:00
Theo Arends
14f6f6f22b
Add command TempOffset -12.6 .. 12.6
...
Add command TempOffset -12.6 .. 12.6 to set global temperature sensor offset (#6958 )
2019-11-18 12:15:49 +01:00
stefanbode
68c3255658
Enable Temp. Compensation by global offset
2019-11-18 09:18:21 +01:00
Theo Arends
7b10bec8fe
Refactor SDK erase
...
Add device hardware type to status 2
2019-11-14 15:57:52 +01:00
Theo Arends
e099ebe7b6
Bump version to 7.0.0.4
...
Add command WifiPower 0 .. 20.5 to set Wifi Output Power which will be default set to 17dB
2019-11-08 13:00:32 +01:00
Theo Arends
6be5daa77c
Fix Tele message when DeepSleepTime is 0
...
Fix Tele message when DeepSleepTime is 0 (#6842 )
2019-11-07 14:49:29 +01:00
stefanbode
5dcf0de19a
fix. teleperiod issue with deep_sleep. #6842
...
#6842 fixed
2019-11-07 10:55:31 +01:00
Theo Arends
b46c6ef3e5
Refactor I2c drivers
2019-11-04 10:38:05 +01:00
Theo Arends
8ba8f406f6
Update support_command.ino
2019-11-03 17:57:22 +01:00
Theo Arends
1e29593469
Bump version 7.0.0.3
...
Initial support for I2C driver runtime control using command I2CDriver and document I2CDEVICES.md
2019-11-03 17:54:39 +01:00
Theo Arends
4891bad69a
Change sonoff references to tasmota
2019-11-03 15:37:33 +01:00
Theo Arends
4b49979274
Add SetOption comments to code
2019-11-03 13:51:22 +01:00
Theo Arends
5f4e38023d
Add SetOption comments to code
2019-11-03 12:33:36 +01:00
Theo Arends
e497421ace
Add command SetOption75 0/1 to switch between grouptopic
...
Add command SetOption75 0/1 to switch between grouptopic (0) using fulltopic replacing %topic% or (1) is cmnd/<grouptopic> (#6779 )
2019-10-31 17:24:06 +01:00
Theo Arends
23cef04b9e
Refactor command SetOption
2019-10-31 13:18:00 +01:00
Theo Arends
c541457763
Merge branch 'development' into fix_so37
2019-10-31 12:15:35 +01:00
Theo Arends
50e1038c05
Add support for SetOption82-113
2019-10-31 12:12:48 +01:00
Stephan Hadinger
a8d0d8a67f
Fix better control of RGB/White when SetOption37 >128, added Dimmer1 and Dimmer2 commands
2019-10-31 11:12:00 +01:00
Theo Arends
6fc9dccfe8
Some CppCheck optimizations
2019-10-30 14:08:43 +01:00
Theo Arends
0e07397ff7
Change Sonoff-Tasmota to Tasmota
2019-10-27 12:04:08 +01:00