mirror of https://github.com/arendst/Tasmota.git
973 lines
44 KiB
C++
973 lines
44 KiB
C++
/*
|
|
xnrg_29_modbus.ino - Generic Modbus energy meter support for Tasmota
|
|
|
|
Copyright (C) 2022 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef USE_ENERGY_SENSOR
|
|
#ifdef USE_MODBUS_ENERGY
|
|
/*********************************************************************************************\
|
|
* Generic Modbus energy meter
|
|
*
|
|
* - Supports single three phase device or three single phase devices of same model on bus.
|
|
* - Uses a rule file called modbus allowing for easy configuration of modbus energy monitor device(s).
|
|
*
|
|
* Value pair description:
|
|
* {"Name":"SDM230","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":0,"Current":6,"Power":12,"ApparentPower":18,"ReactivePower":24,"Factor":30,"Frequency":70,"Total":342,"ExportActive":0x004A}
|
|
* Modbus config parameters:
|
|
* Name - Name of energy monitoring device(s)
|
|
* Baud - Baudrate of device modbus interface - optional. default is 9600
|
|
* Config - Serial config parameters like 8N1 - 8 databits, No parity, 1 stop bit
|
|
* Poll - Time between modbus requests - optional. default is 200 milliseconds
|
|
* Address - Modbus device address entered as decimal (1) or hexadecimal (0x01) or up to three addresses ([1,2,3]) - optional. default = 1
|
|
* Function - Modbus function code to access registers - optional. default = 4
|
|
* Tasmota default embedded register names:
|
|
* Voltage - Voltage register entered as decimal or hexadecimal for one phase (0x0000) or up to three phases ([0x0000,0x0002,0x0004]) or
|
|
* Additional defined parameters
|
|
* Value pair description:
|
|
* {"R":0,"T":0,"F":0}
|
|
* R - Modbus register entered as decimal or hexadecimal for one phase (0x0160) or up to three phases ([0x0160,0x0162,0x0164])
|
|
* T - Datatype - optional. default is 0 - float:
|
|
* 0 - float
|
|
* 1 = 2-byte signed
|
|
* 2 = 4-byte signed
|
|
* 3 = 2-byte unsigned
|
|
* 4 = 4-byte unsigned
|
|
* 5 = not used
|
|
* 6 = 4-byte signed with swapped words
|
|
* 7 = not used
|
|
* 8 = 4-byte unsigned with swapped words
|
|
* F - Register factor positive for multiplication or negative for division - optional. default is 0 - no action
|
|
* -4 - divide by 10000
|
|
* -3 - divide by 1000
|
|
* -2 - divide by 100
|
|
* -1 - divide by 10
|
|
* 0 - no action
|
|
* 1 - multiply by 10
|
|
* 2 - multiply by 100
|
|
* 3 - multiply by 1000
|
|
* 4 - multiply by 10000
|
|
* M - [LEGACY - replaced by "F"] Divide register by 1 to 10000 - optional. default = 0 (no action)
|
|
* Current - Current register entered as decimal or hexadecimal for one phase (0x0006) or up to three phases ([0x0006,0x0008,0x000A]) or
|
|
* See additional defines like voltage.
|
|
* Power - Active power register entered as decimal or hexadecimal for one phase (0x000C) or up to three phases ([0x000C,0x000E,0x0010]) or
|
|
* See additional defines like voltage.
|
|
* ApparentPower - Apparent power register entered as decimal or hexadecimal for one phase (0x000C) or up to three phases ([0x000C,0x000E,0x0010]) or
|
|
* See additional defines like voltage.
|
|
* ReactivePower - Reactive power register entered as decimal or hexadecimal for one phase (0x0018) or up to three phases ([0x0018,0x001A,0x001C]) or
|
|
* See additional defines like voltage.
|
|
* Factor - Power factor register entered as decimal or hexadecimal for one phase (0x001E) or up to three phases ([0x001E,0x0020,0x0022]) or
|
|
* See additional defines like voltage.
|
|
* Frequency - Frequency register entered as decimal or hexadecimal for one phase (0x0046) or up to three phases ([0x0046,0x0048,0x004A]) or
|
|
* See additional defines like voltage.
|
|
* Total - Total active energy register entered as decimal or hexadecimal for one phase (0x0156) or up to three phases ([0x015A,0x015C,0x015E]) or
|
|
* See additional defines like voltage.
|
|
* ExportActive - Export active energy register entered as decimal or hexadecimal for one phase (0x0160) or up to three phases ([0x0160,0x0162,0x0164]) or
|
|
* See additional defines like voltage.
|
|
* Optional user defined registers:
|
|
* User - Additional user defined registers
|
|
* Value pair description:
|
|
* "User":{"R":0x0024,"T":0,"F":0,"J":"PhaseAngle","G":"Phase Angle","U":"Deg","D":2}
|
|
* R - Modbus register entered as decimal or hexadecimal for one phase (0x0160) or up to three phases ([0x0160,0x0162,0x0164])
|
|
* T - Datatype - optional. default is 0 - float:
|
|
* 0 - float
|
|
* 1 = 2-byte signed
|
|
* 2 = 4-byte signed
|
|
* 3 = 2-byte unsigned
|
|
* 4 = 4-byte unsigned
|
|
* 5 = not used
|
|
* 6 = 4-byte signed with swapped words
|
|
* 7 = not used
|
|
* 8 = 4-byte unsigned with swapped words
|
|
* F - Register factor positive for multiplication or negative for division - optional. default is 0 - no action
|
|
* -4 - divide by 10000
|
|
* -3 - divide by 1000
|
|
* -2 - divide by 100
|
|
* -1 - divide by 10
|
|
* 0 - no action
|
|
* 1 - multiply by 10
|
|
* 2 - multiply by 100
|
|
* 3 - multiply by 1000
|
|
* 4 - multiply by 10000
|
|
* M - [LEGACY - replaced by "F"] Divide register by 1 to 10000 - optional. default = 0 (no action)
|
|
* J - JSON register name (preferrably without spaces like "PhaseAngle") - mandatory. It needs to be different from the Tasmota default embedded register names
|
|
* G - GUI register name - optional. If not defined the register will not be shown in the GUI
|
|
* U - GUI unit name - optional. default is none
|
|
* D - Number of decimals for floating point presentation (0 to 20) or a code correspondig to Tasmota resolution command settings:
|
|
* 21 - VoltRes (V)
|
|
* 22 - AmpRes (A)
|
|
* 23 - WattRes (W, VA, VAr)
|
|
* 24 - EnergyRes (kWh, kVAh, kVArh)
|
|
* 25 - FreqRes (Hz)
|
|
* 26 - TempRes (C, F)
|
|
* 27 - HumRes (%)
|
|
* 28 - PressRes (hPa, mmHg)
|
|
* 29 - WeightRes (Kg)
|
|
*
|
|
* Example using default Energy registers:
|
|
* rule3 on file#modbus do {"Name":"SDM230","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":0,"Current":6,"Power":12,"ApparentPower":18,"ReactivePower":24,"Factor":30,"Frequency":70,"Total":342,"ExportActive":0x004A} endon
|
|
* rule3 on file#modbus do {"Name":"SDM230 with hex registers","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":0x0000,"Current":0x0006,"Power":0x000C,"ApparentPower":0x0012,"ReactivePower":0x0018,"Factor":0x001E,"Frequency":0x0046,"Total":0x0156,"ExportActive":0x004A} endon
|
|
* rule3 on file#modbus do {"Name":"DDSU666","Baud":9600,"Config":8N1","Address":1,"Function":4,"Voltage":0x2000,"Current":0x2002,"Power":0x2004,"ReactivePower":0x2006,"Factor":0x200A,"Frequency":0x200E,"Total":0x4000,"ExportActive":0x400A} endon
|
|
* rule3 on file#modbus do {"Name":"PZEM014","Baud":9600,"Config":8N1","Address":1,"Function":4,"Voltage":{"R":0,"T":3,"F":-1},"Current":{"R":1,"T":8,"F":-3},"Power":{"R":3,"T":8,"F":-1},"Factor":{"R":8,"T":3,"F":-2},"Frequency":{"R":7,"T":3,"F":-1},"Total":{"R":5,"T":8,"F":-3}} endon
|
|
* rule3 on file#modbus do {"Name":"3 x PZEM014","Baud":9600,"Config":8N1","Address":[1,2,3],"Function":4,"Voltage":{"R":0,"T":3,"F":-1},"Current":{"R":1,"T":8,"F":-3},"Power":{"R":3,"T":8,"F":-1},"Factor":{"R":8,"T":3,"F":-2},"Frequency":{"R":7,"T":3,"F":-1},"Total":{"R":5,"T":8,"F":-3}} endon
|
|
* rule3 on file#modbus do {"Name":"Solax X3MIC","Baud":9600,"Config":8N1","Address":1,"Function":4,"Voltage":{"R":0x0404,"T":3,"F":-1},"Power":{"R":0x040e,"T":3,"F":0},"Total":{"R":0x0423,"T":8,"F":-3}} endon
|
|
*
|
|
* Example using default Energy registers and some user defined registers:
|
|
* rule3 on file#modbus do {"Name":"SDM72","Baud":9600,"Config":8N1","Address":0x01,"Function":0x04,"Power":0x0034,"Total":0x0156,"ExportActive":0x004A,"User":[{"R":0x0502,"J":"ImportActive","G":"Import Active","U":"kWh","D":24},{"R":0x0502,"J":"ExportPower","G":"Export Power","U":"W","D":23},{"R":0x0500,"J":"ImportPower","G":"Import Power","U":"W","D":23}]} endon
|
|
* rule3 on file#modbus do {"Name":"SDM120","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":0,"Current":6,"Power":12,"ApparentPower":18,"ReactivePower":24,"Factor":30,"Frequency":70,"Total":342,"ExportActive":0x004A,"User":[{"R":0x0048,"J":"ImportActive","G":"Import Active","U":"kWh","D":24},{"R":0x004E,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":24},{"R":0x004C,"J":"ImportReactive","G":"Import Reactive","U":"kVArh","D":24},{"R":0x0024,"J":"PhaseAngle","G":"Phase Angle","U":"Deg","D":2}]} endon
|
|
* rule3 on file#modbus do {"Name":"SDM230 with two user registers","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":0,"Current":6,"Power":12,"ApparentPower":18,"ReactivePower":24,"Factor":30,"Frequency":70,"Total":342,"ExportActive":0x004A,"User":[{"R":0x004E,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":3},{"R":0x0024,"J":"PhaseAngle","G":"Phase Angle","U":"Deg","D":2}]} endon
|
|
* rule3 on file#modbus do {"Name":"SDM630","Baud":9600,"Config":8N1","Address":1,"Function":4,"Voltage":[0,2,4],"Current":[6,8,10],"Power":[12,14,16],"ApparentPower":[18,20,22],"ReactivePower":[24,26,28],"Factor":[30,32,34],"Frequency":70,"Total":342,"ExportActive":[352,354,356],"User":{"R":[346,348,350],"J":"ImportActive","G":"Import Active","U":"kWh","D":24}} endon
|
|
*
|
|
* Note:
|
|
* - To enter long rules using the serial console and solve error "Serial buffer overrun" you might need to enlarge the serial input buffer with command serialbuffer 800
|
|
* - Changes to rule file are only executed on restart
|
|
*
|
|
* Restrictions:
|
|
* - Supports Modbus single and double integer registers in addition to floating point registers
|
|
* - Max number of user defined registers is defined by one rule buffer (511 characters uncompressed, around 800 characters compressed)
|
|
*
|
|
* To do:
|
|
* - Support all three rule slots
|
|
* - Support other modbus register like integers
|
|
*
|
|
* Test set:
|
|
* rule3 on file#modbus do {"Name":"GROWATT","Baud":9600,"Config":8N1","Address":11,"Function":4,"Voltage":{"R":[4110,4114,4118],"T":3,"F":-1},"Current":{"R":[4111,4115,4119],"T":3,"F":-1},"Power":{"R":[4112,4116,4120],"T":8,"F":-1},"Frequency":{"R":4109,"T":3,"F":-2},"Total":{"R":4124,"T":8,"F":-1},"User":[{"R":[4099,4103],"J":"VoltagePV","G":"Voltage PV","U":"V","D":21,"T":3,"F":-1},{"R":[4100,4104],"J":"CurrentPV","G":"Current PV","U":"A","D":22,"T":3,"F":-1},{"R":[4101,4105],"J":"PowerPV","G":"Power PV","U":"W","D":23,"T":8,"F":-1}]} endon
|
|
* rule3 on file#modbus do {"Name":"2 x PZEM014","Baud":9600,"Config":8N1","Address":[1,1],"Function":4,"Voltage":{"R":0,"T":3,"F":-1},"Current":{"R":1,"T":8,"F":-3},"Power":{"R":3,"T":8,"F":-1},"Factor":{"R":8,"T":3,"F":-2},"Frequency":{"R":7,"T":3,"F":-1},"Total":{"R":5,"T":8,"F":-3}} endon
|
|
* rule3 on file#modbus do {"Name":"SDM230 test1","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":[0,0,0],"Current":[6,6,6],"Power":[12,12,12],"ApparentPower":[18,18,18],"ReactivePower":[24,24,24],"Factor":[30,30,30],"Frequency":[70,70,70],"Total":[342,342,342]} endon
|
|
* rule3 on file#modbus do {"Name":"SDM230 test2","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":[0,0,0],"Current":[6,6,6],"Power":[12,12,12],"ApparentPower":[18,18,18],"ReactivePower":[24,24,24],"Factor":[30,30,30],"Frequency":70,"Total":[342,342,342]} endon
|
|
* rule3 on file#modbus do {"Name":"SDM230 test3","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":0,"Current":[6,6,6],"Power":[12,12,12],"ApparentPower":[18,18,18],"ReactivePower":[24,24,24],"Factor":[30,30,30],"Frequency":70,"Total":[342,342,342]} endon
|
|
* rule3 on file#modbus do {"Name":"SDM230 test4","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":0,"Current":6,"Power":12,"ApparentPower":18,"ReactivePower":24,"Factor":30,"Frequency":70,"Total":342,"ExportActive":0x004A,"User":[{"R":0x004E,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":24},{"R":0x0024,"J":"PhaseAngle","G":"Phase Angle","U":"Deg","D":2}]} endon
|
|
* rule3 on file#modbus do {"Name":"SDM230 test5","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":[0,0,0],"Current":6,"Power":12,"ApparentPower":18,"ReactivePower":24,"Factor":30,"Frequency":70,"Total":342,"ExportActive":0x004A,"User":[{"R":[0x004E,0x004E,0x004E],"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":3},{"R":0x0024,"J":"PhaseAngle","G":"Phase Angle","U":"Deg","D":2}]} endon
|
|
* rule3 on file#modbus do {"Name":"SDM120 test1","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":0,"Current":6,"Power":12,"ApparentPower":18,"ReactivePower":24,"Factor":30,"Frequency":70,"Total":342,"ExportActive":0x004A,"User":[{"R":0x0048,"J":"ImportActive","G":"Import Active","U":"kWh","D":24},{"R":0x004E,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":24},{"R":0x004C,"J":"ImportReactive","G":"Import Reactive","U":"kVArh","D":24},{"R":0x0024,"J":"PhaseAngle","G":"Phase Angle","U":"Deg","D":2}]} endon
|
|
* rule3 on file#modbus do {"Name":"PZEM014 test1","Baud":9600,"Config":8N1","Address":1,"Function":4,"Voltage":{"R":0,"T":3,"F":-1},"Current":{"R":1,"T":8,"F":-3},"Power":{"R":3,"T":8,"F":-1},"Factor":{"R":8,"T":3,"F":-2},"Frequency":{"R":7,"T":3,"F":-1},"Total":{"R":5,"T":8,"F":-3},"User":{"R":0,"J":"VoltageTest","G":"Voltage test","U":"V","D":21,"T":3,"F":-1}} endon
|
|
*
|
|
* rule3 on file#modbus do {"Name":"SDM230 test6","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":{"R":0,"T":0,"M":1},"Current":{"R":6,"T":0,"M":1},"Power":{"R":12,"T":0,"M":1},"Frequency":70,"Total":342} endon
|
|
* rule3 on file#modbus do {"Name":"SDM230 test6","Baud":2400,"Config":8N1","Address":1,"Function":4,"Voltage":{"R":0,"T":0,"F":0},"Current":{"R":6,"T":0,"F":0},"Power":{"R":12,"T":0,"F":0},"Frequency":70,"Total":342,"User":{"R":0x0048,"T":0,"F":-1,"J":"ImportActive","G":"Import Active","U":"kWh","D":24}} endon
|
|
\*********************************************************************************************/
|
|
|
|
#define XNRG_29 29
|
|
|
|
#define ENERGY_MODBUS_SPEED 9600 // Default Modbus baudrate
|
|
#define ENERGY_MODBUS_CONFIG TS_SERIAL_8N1 // Default Modbus serial configuration
|
|
#define ENERGY_MODBUS_ADDR 1 // Default Modbus device_address
|
|
#define ENERGY_MODBUS_FUNC 0x04 // Default Modbus function code
|
|
#define ENERGY_MODBUS_MAX_DEVICES ENERGY_MAX_PHASES // Support up to three single phase devices as three phases
|
|
|
|
#define ENERGY_MODBUS_DATATYPE 0 // Default Modbus datatype is 4-byte float
|
|
#define ENERGY_MODBUS_DECIMALS 0 // Default user decimal resolution
|
|
|
|
#define ENERGY_MODBUS_TICKER // Enable for ESP8266 when using softwareserial solving most modbus serial retries
|
|
#define ENERGY_MODBUS_TICKER_POLL 200 // Modbus poll time in ms between read register requests
|
|
|
|
//#define ENERGY_MODBUS_DEBUG
|
|
//#define ENERGY_MODBUS_DEBUG_SHOW
|
|
|
|
const uint16_t nrg_mbs_reg_not_used = 0xFFFF; // Odd number 65535 is unused register
|
|
|
|
// Even data type is single (2-byte) register, Odd data type is double (4-byte) registers
|
|
enum EnergyModbusDataType { NRG_DT_FLOAT, // 0 = 4-byte float
|
|
NRG_DT_S16, // 1 = 2-byte signed
|
|
NRG_DT_S32, // 2 = 4-byte signed
|
|
NRG_DT_U16, // 3 = 2-byte unsigned
|
|
NRG_DT_U32, // 4 = 4-byte unsigned
|
|
NRG_DT_x16_nu1, // 5 = 2-byte
|
|
NRG_DT_S32_SW, // 6 = 4-byte signed with swapped words
|
|
NRG_DT_x16_nu2, // 7 = 2-byte
|
|
NRG_DT_U32_SW, // 8 = 4-byte unsigned with swapped words
|
|
NRG_DT_MAX };
|
|
|
|
enum EnergyModbusResolutions { NRG_RES_VOLTAGE = 21, // 21 = V
|
|
NRG_RES_CURRENT, // 22 = A
|
|
NRG_RES_POWER, // 23 = W, VA, VAr
|
|
NRG_RES_ENERGY, // 24 = kWh, kVAh, kVArh
|
|
NRG_RES_FREQUENCY, // 25 = Hz
|
|
NRG_RES_TEMPERATURE, // 26 = C, F
|
|
NRG_RES_HUMIDITY, // 27 = %
|
|
NRG_RES_PRESSURE, // 28 = hPa, mmHg
|
|
NRG_RES_WEIGHT }; // 29 = Kg
|
|
|
|
enum EnergyModbusRegisters { NRG_MBS_VOLTAGE,
|
|
NRG_MBS_CURRENT,
|
|
NRG_MBS_ACTIVE_POWER,
|
|
NRG_MBS_APPARENT_POWER,
|
|
NRG_MBS_REACTIVE_POWER,
|
|
NRG_MBS_POWER_FACTOR,
|
|
NRG_MBS_FREQUENCY,
|
|
NRG_MBS_TOTAL_ENERGY,
|
|
NRG_MBS_EXPORT_ACTIVE_ENERGY,
|
|
NRG_MBS_MAX_REGS };
|
|
|
|
const char kEnergyModbusValues[] PROGMEM = D_JSON_VOLTAGE "|" // Voltage
|
|
D_JSON_CURRENT "|" // Current
|
|
D_JSON_POWERUSAGE "|" // Power
|
|
D_JSON_APPARENT_POWERUSAGE "|" // ApparentPower
|
|
D_JSON_REACTIVE_POWERUSAGE "|" // ReactivePower
|
|
D_JSON_POWERFACTOR "|" // Factor
|
|
D_JSON_FREQUENCY "|" // Frequency
|
|
D_JSON_TOTAL "|" // Total
|
|
D_JSON_EXPORT_ACTIVE "|" // ExportActive
|
|
;
|
|
|
|
#include <TasmotaModbus.h>
|
|
TasmotaModbus *EnergyModbus;
|
|
|
|
#ifdef ENERGY_MODBUS_TICKER
|
|
#include <Ticker.h>
|
|
Ticker ticker_energy_modbus;
|
|
#endif // ENERGY_MODBUS_TICKER
|
|
|
|
struct NRGMBSPARAM {
|
|
uint32_t serial_bps;
|
|
uint32_t serial_config;
|
|
uint16_t ticker_poll;
|
|
uint8_t device_address[ENERGY_MODBUS_MAX_DEVICES];
|
|
uint8_t devices;
|
|
uint8_t function;
|
|
uint8_t total_regs;
|
|
uint8_t user_adds;
|
|
uint8_t state;
|
|
uint8_t retry;
|
|
int8_t phase;
|
|
bool mutex;
|
|
} NrgMbsParam;
|
|
|
|
typedef struct NRGMBSREGISTER {
|
|
uint16_t address[ENERGY_MAX_PHASES];
|
|
int16_t factor;
|
|
uint32_t datatype;
|
|
} NrgMbsRegister_t;
|
|
NrgMbsRegister_t *NrgMbsReg = nullptr;
|
|
|
|
typedef struct NRGMBSUSER {
|
|
float data[ENERGY_MAX_PHASES];
|
|
char* json_name;
|
|
char* gui_name;
|
|
char* gui_unit;
|
|
uint32_t resolution;
|
|
} NrgMbsUser_t;
|
|
NrgMbsUser_t *NrgMbsUser = nullptr;
|
|
|
|
/*********************************************************************************************/
|
|
|
|
void EnergyModbusLoop(void) {
|
|
#ifdef ENERGY_MODBUS_TICKER
|
|
if (NrgMbsParam.mutex || TasmotaGlobal.ota_state_flag) { return; }
|
|
#else
|
|
if (NrgMbsParam.mutex) { return; }
|
|
#endif // ENERGY_MODBUS_TICKER
|
|
NrgMbsParam.mutex = 1;
|
|
|
|
uint32_t register_count;
|
|
|
|
bool data_ready = EnergyModbus->ReceiveReady();
|
|
|
|
if (data_ready) {
|
|
uint8_t buffer[15]; // At least 5 + (2 * 2) = 9
|
|
|
|
// Even data type is single register, Odd data type is double registers
|
|
register_count = 2 - (NrgMbsReg[NrgMbsParam.state].datatype & 1);
|
|
uint32_t error = EnergyModbus->ReceiveBuffer(buffer, register_count);
|
|
if (error) {
|
|
/* Return codes from TasmotaModbus.h:
|
|
* 0 = No error
|
|
* 1 = Illegal Function,
|
|
* 2 = Illegal Data Address,
|
|
* 3 = Illegal Data Value,
|
|
* 4 = Slave Error
|
|
* 5 = Acknowledge but not finished (no error)
|
|
* 6 = Slave Busy
|
|
* 7 = Not enough minimal data received
|
|
* 8 = Memory Parity error
|
|
* 9 = Crc error
|
|
* 10 = Gateway Path Unavailable
|
|
* 11 = Gateway Target device failed to respond
|
|
* 12 = Wrong number of registers
|
|
* 13 = Register data not specified
|
|
* 14 = To many registers
|
|
*/
|
|
#ifdef ENERGY_MODBUS_DEBUG
|
|
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NRG: Modbus register %d, phase %d, rcvd %*_H"),
|
|
NrgMbsParam.state, NrgMbsParam.phase, EnergyModbus->ReceiveCount(), buffer);
|
|
#endif
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: Modbus error %d"), error);
|
|
} else {
|
|
/* Modbus protocol format:
|
|
* SA = Device Address
|
|
* FC = Function Code
|
|
* BC = Byte count
|
|
* Fh = First or High word MSB
|
|
* Fl = First or High word LSB
|
|
* Sh = Second or Low word MSB
|
|
* Sl = Second or Low word LSB
|
|
* Cl = CRC lsb
|
|
* Ch = CRC msb
|
|
*/
|
|
Energy.data_valid[NrgMbsParam.phase] = 0;
|
|
|
|
float value;
|
|
switch (NrgMbsReg[NrgMbsParam.state].datatype) {
|
|
case NRG_DT_FLOAT: { // 0
|
|
// 0 1 2 3 4 5 6 7 8
|
|
// SA FC BC Fh Fl Sh Sl Cl Ch
|
|
// 01 04 04 43 66 33 34 1B 38 = 230.2 Volt
|
|
((uint8_t*)&value)[3] = buffer[3]; // Get float values
|
|
((uint8_t*)&value)[2] = buffer[4];
|
|
((uint8_t*)&value)[1] = buffer[5];
|
|
((uint8_t*)&value)[0] = buffer[6];
|
|
break;
|
|
}
|
|
case NRG_DT_S16: { // 1
|
|
// 0 1 2 3 4 5 6
|
|
// SA FC BC Fh Fl Cl Ch
|
|
int16_t value_buff = ((int16_t)buffer[3])<<8 | buffer[4];
|
|
value = (float)value_buff;
|
|
break;
|
|
}
|
|
case NRG_DT_U16: { // 3
|
|
// 0 1 2 3 4 5 6
|
|
// SA FC BC Fh Fl Cl Ch
|
|
uint16_t value_buff = ((uint16_t)buffer[3])<<8 | buffer[4];
|
|
value = (float)value_buff;
|
|
break;
|
|
}
|
|
case NRG_DT_S32: { // 2
|
|
// 0 1 2 3 4 5 6 7 8
|
|
// SA FC BC Fh Fl Sh Sl Cl Ch
|
|
int32_t value_buff = ((int32_t)buffer[3])<<24 | ((uint32_t)buffer[4])<<16 | ((uint32_t)buffer[5])<<8 | buffer[6];
|
|
value = (float)value_buff;
|
|
break;
|
|
}
|
|
case NRG_DT_S32_SW: { // 6
|
|
// 0 1 2 3 4 5 6 7 8
|
|
// SA FC BC Sh Sl Fh Fl Cl Ch
|
|
int32_t value_buff = ((int32_t)buffer[5])<<24 | ((uint32_t)buffer[6])<<16 | ((uint32_t)buffer[3])<<8 | buffer[4];
|
|
value = (float)value_buff;
|
|
break;
|
|
}
|
|
case NRG_DT_U32: { // 4
|
|
// 0 1 2 3 4 5 6 7 8
|
|
// SA FC BC Fh Fl Sh Sl Cl Ch
|
|
uint32_t value_buff = ((uint32_t)buffer[3])<<24 | ((uint32_t)buffer[4])<<16 | ((uint32_t)buffer[5])<<8 | buffer[6];
|
|
value = (float)value_buff;
|
|
break;
|
|
}
|
|
case NRG_DT_U32_SW: { // 8
|
|
// 0 1 2 3 4 5 6 7 8
|
|
// SA FC BC Sh Sl Fh Fl Cl Ch
|
|
// 01 04 04 EB EC 00 0E 8E 51 = 977.9000 (Solax protocol X1&X3)
|
|
uint32_t value_buff = ((uint32_t)buffer[5])<<24 | ((uint32_t)buffer[6])<<16 | ((uint32_t)buffer[3])<<8 | buffer[4];
|
|
value = (float)value_buff;
|
|
break;
|
|
}
|
|
}
|
|
uint32_t factor = 1;
|
|
// 1 = 10, 2 = 100, 3 = 1000, 4 = 10000
|
|
uint32_t scaler = abs(NrgMbsReg[NrgMbsParam.state].factor);
|
|
while (scaler) {
|
|
factor *= 10;
|
|
scaler--;
|
|
}
|
|
if (NrgMbsReg[NrgMbsParam.state].factor < 0) {
|
|
value /= factor;
|
|
} else {
|
|
value *= factor;
|
|
}
|
|
|
|
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NRG: Modbus register %d, phase %d, rcvd %*_H, T %d, F %d, value %4_f"),
|
|
NrgMbsParam.state, NrgMbsParam.phase, EnergyModbus->ReceiveCount(), buffer,
|
|
NrgMbsReg[NrgMbsParam.state].datatype, NrgMbsReg[NrgMbsParam.state].factor, &value);
|
|
|
|
switch (NrgMbsParam.state) {
|
|
case NRG_MBS_VOLTAGE:
|
|
Energy.voltage[NrgMbsParam.phase] = value; // 230.2 V
|
|
break;
|
|
case NRG_MBS_CURRENT:
|
|
Energy.current[NrgMbsParam.phase] = value; // 1.260 A
|
|
break;
|
|
case NRG_MBS_ACTIVE_POWER:
|
|
Energy.active_power[NrgMbsParam.phase] = value; // -196.3 W
|
|
break;
|
|
case NRG_MBS_APPARENT_POWER:
|
|
Energy.apparent_power[NrgMbsParam.phase] = value; // 223.4 VA
|
|
break;
|
|
case NRG_MBS_REACTIVE_POWER:
|
|
Energy.reactive_power[NrgMbsParam.phase] = value; // 92.2
|
|
break;
|
|
case NRG_MBS_POWER_FACTOR:
|
|
Energy.power_factor[NrgMbsParam.phase] = value; // -0.91
|
|
break;
|
|
case NRG_MBS_FREQUENCY:
|
|
Energy.frequency[NrgMbsParam.phase] = value; // 50.0 Hz
|
|
break;
|
|
case NRG_MBS_TOTAL_ENERGY:
|
|
Energy.import_active[NrgMbsParam.phase] = value; // 6.216 kWh => used in EnergyUpdateTotal()
|
|
break;
|
|
case NRG_MBS_EXPORT_ACTIVE_ENERGY:
|
|
Energy.export_active[NrgMbsParam.phase] = value; // 478.492 kWh
|
|
break;
|
|
default:
|
|
if (NrgMbsUser) {
|
|
NrgMbsUser[NrgMbsParam.state - NRG_MBS_MAX_REGS].data[NrgMbsParam.phase] = value;
|
|
}
|
|
}
|
|
}
|
|
} // end data ready
|
|
|
|
if (0 == NrgMbsParam.retry || data_ready) {
|
|
NrgMbsParam.retry = 1;
|
|
|
|
uint32_t address = 0;
|
|
uint32_t phase = 0;
|
|
do {
|
|
NrgMbsParam.phase++;
|
|
if (NrgMbsParam.phase >= Energy.phase_count) {
|
|
NrgMbsParam.phase = 0;
|
|
NrgMbsParam.state++;
|
|
if (NrgMbsParam.state >= NrgMbsParam.total_regs) {
|
|
NrgMbsParam.state = 0;
|
|
NrgMbsParam.phase = 0;
|
|
EnergyUpdateTotal(); // update every cycle after all registers have been read
|
|
}
|
|
}
|
|
delay(0);
|
|
if (NrgMbsParam.devices == 1) {
|
|
phase = NrgMbsParam.phase;
|
|
} else {
|
|
address = NrgMbsParam.phase;
|
|
}
|
|
} while (NrgMbsReg[NrgMbsParam.state].address[phase] == nrg_mbs_reg_not_used);
|
|
|
|
// Even data type is single register, Odd data type is double registers
|
|
register_count = 2 - (NrgMbsReg[NrgMbsParam.state].datatype & 1);
|
|
|
|
#ifdef ENERGY_MODBUS_DEBUG
|
|
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("NRG: Modbus send Device %d, Function %d, Register %04X (%d/%d), Size %d"),
|
|
NrgMbsParam.device_address[address], NrgMbsParam.function,
|
|
NrgMbsReg[NrgMbsParam.state].address[phase], NrgMbsParam.state, phase,
|
|
register_count);
|
|
#endif
|
|
|
|
EnergyModbus->Send(NrgMbsParam.device_address[address], NrgMbsParam.function, NrgMbsReg[NrgMbsParam.state].address[phase], register_count);
|
|
} else {
|
|
NrgMbsParam.retry--;
|
|
|
|
#ifdef ENERGY_MODBUS_DEBUG
|
|
if (NrgMbsParam.devices > 1) {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: Modbus retry device %d state %d"), NrgMbsParam.device_address[NrgMbsParam.phase], NrgMbsParam.state);
|
|
} else {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: Modbus retry state %d phase %d"), NrgMbsParam.state, NrgMbsParam.phase);
|
|
}
|
|
#endif
|
|
|
|
}
|
|
delay(0);
|
|
NrgMbsParam.mutex = 0;
|
|
}
|
|
|
|
#ifdef USE_RULES
|
|
uint32_t EnergyModbusReadRegisterInfo(JsonParserObject add_value, uint32_t reg_index) {
|
|
// {"R":0,"T":0,"F":0}
|
|
// {"R":[0,2,4],"T":0,"F":0}
|
|
// {"R":[0,2,4],"T":0,"M":10} - [LEGACY]
|
|
uint32_t phase = 0;
|
|
JsonParserToken val;
|
|
val = add_value[PSTR("R")]; // Register address
|
|
if (val.isArray()) {
|
|
// [0,2,4]
|
|
JsonParserArray address_arr = val.getArray();
|
|
for (auto value : address_arr) {
|
|
NrgMbsReg[reg_index].address[phase] = value.getUInt();
|
|
phase++;
|
|
if (phase >= ENERGY_MAX_PHASES) { break; }
|
|
}
|
|
} else if (val) {
|
|
// 0
|
|
NrgMbsReg[reg_index].address[0] = val.getUInt();
|
|
phase++;
|
|
}
|
|
val = add_value[PSTR("T")]; // Register data type
|
|
if (val) {
|
|
// 0
|
|
NrgMbsReg[reg_index].datatype = val.getUInt();
|
|
}
|
|
val = add_value[PSTR("F")]; // Register factor
|
|
if (val) {
|
|
// 1 or -2
|
|
NrgMbsReg[reg_index].factor = val.getInt();
|
|
}
|
|
val = add_value[PSTR("M")]; // [LEGACY] Register divider
|
|
if (val) {
|
|
// 1
|
|
int32_t divider = val.getUInt();
|
|
int factor = 0;
|
|
while (divider > 1) {
|
|
divider /= 10;
|
|
factor--;
|
|
}
|
|
NrgMbsReg[reg_index].factor = factor;
|
|
}
|
|
return phase;
|
|
}
|
|
|
|
bool EnergyModbusReadUserRegisters(JsonParserObject user_add_value, uint32_t add_index) {
|
|
// {"R":0x004E,"T":0,"F":0,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":3,"T":0,"F":0}
|
|
// {"R":[0,2,4],"T":0,"F":0,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":3,"T":0,"F":0}
|
|
uint32_t reg_index = NRG_MBS_MAX_REGS + add_index;
|
|
|
|
// {"R":0,"T":0,"F":0}
|
|
// {"R":[0,2,4],"T":0,"F":0}
|
|
// {"R":[0,2,4],"T":0,"M":10} - [LEGACY]
|
|
uint32_t phase = EnergyModbusReadRegisterInfo(user_add_value, reg_index);
|
|
if (!phase) {
|
|
return false; // No register entered so skip
|
|
}
|
|
if (phase > Energy.phase_count) {
|
|
Energy.phase_count = phase;
|
|
NrgMbsParam.devices = 1; // Only one device allowed with multiple phases
|
|
}
|
|
|
|
JsonParserToken val;
|
|
val = user_add_value[PSTR("J")]; // JSON value name
|
|
if (val) {
|
|
NrgMbsUser[add_index].json_name = SetStr(val.getStr());
|
|
char json_name[32];
|
|
if (GetCommandCode(json_name, sizeof(json_name), NrgMbsUser[add_index].json_name, kEnergyModbusValues) > -1) {
|
|
return false; // Duplicate JSON name
|
|
}
|
|
} else {
|
|
return false; // No mandatory JSON name
|
|
}
|
|
val = user_add_value[PSTR("G")]; // GUI value name
|
|
NrgMbsUser[add_index].gui_name = (val) ? SetStr(val.getStr()) : EmptyStr;
|
|
val = user_add_value[PSTR("U")]; // GUI value Unit
|
|
NrgMbsUser[add_index].gui_unit = (val) ? SetStr(val.getStr()) : EmptyStr;
|
|
NrgMbsUser[add_index].resolution = ENERGY_MODBUS_DECIMALS;
|
|
val = user_add_value[PSTR("D")]; // Decimal resolution
|
|
if (val) {
|
|
NrgMbsUser[add_index].resolution = val.getUInt();
|
|
}
|
|
|
|
#ifdef ENERGY_MODBUS_DEBUG
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: Idx %d (%s), R [%04X,%04X,%04X], T %d, F %d, J '%s', G '%s', U '%s', D %d"),
|
|
reg_index, NrgMbsUser[add_index].json_name,
|
|
NrgMbsReg[reg_index].address[0],
|
|
NrgMbsReg[reg_index].address[1],
|
|
NrgMbsReg[reg_index].address[2],
|
|
NrgMbsReg[reg_index].datatype,
|
|
NrgMbsReg[reg_index].factor,
|
|
NrgMbsUser[add_index].json_name,
|
|
NrgMbsUser[add_index].gui_name,
|
|
NrgMbsUser[add_index].gui_unit,
|
|
NrgMbsUser[add_index].resolution);
|
|
#endif
|
|
|
|
return true;
|
|
}
|
|
#endif // USE_RULES
|
|
|
|
bool EnergyModbusReadRegisters(void) {
|
|
#ifdef USE_RULES
|
|
String modbus = RuleLoadFile("MODBUS");
|
|
if (!modbus.length()) { return false; } // File not found
|
|
// AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: File '%s'"), modbus.c_str());
|
|
|
|
const char* json = modbus.c_str();
|
|
uint32_t len = strlen(json) +1;
|
|
if (len < 7) { return false; } // Invalid JSON
|
|
|
|
char json_buffer[len];
|
|
memcpy(json_buffer, json, len); // Keep original safe
|
|
JsonParser parser(json_buffer);
|
|
JsonParserObject root = parser.getRootObject();
|
|
if (!root) { return false; } // Invalid JSON
|
|
|
|
// Init defaults
|
|
Energy.phase_count = 1;
|
|
NrgMbsParam.serial_bps = ENERGY_MODBUS_SPEED;
|
|
NrgMbsParam.serial_config = ENERGY_MODBUS_CONFIG;
|
|
NrgMbsParam.ticker_poll = ENERGY_MODBUS_TICKER_POLL;
|
|
NrgMbsParam.device_address[0] = ENERGY_MODBUS_ADDR;
|
|
NrgMbsParam.devices = 1;
|
|
NrgMbsParam.function = ENERGY_MODBUS_FUNC;
|
|
NrgMbsParam.user_adds = 0;
|
|
|
|
// Detect buffer allocation
|
|
JsonParserToken val;
|
|
val = root[PSTR("User")];
|
|
if (val) {
|
|
if (val.isArray()) {
|
|
// [{"R":0x004E,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":3},{"R":0x0024,"J":"PhaseAngle","G":"Phase Angle","U":"Deg","D":2}]
|
|
NrgMbsParam.user_adds = val.size();
|
|
} else {
|
|
// {"R":0x004E,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":3}
|
|
NrgMbsParam.user_adds = 1;
|
|
}
|
|
}
|
|
NrgMbsParam.total_regs = NRG_MBS_MAX_REGS + NrgMbsParam.user_adds;
|
|
NrgMbsReg = (NrgMbsRegister_t*)calloc(NrgMbsParam.total_regs, sizeof(NrgMbsRegister_t));
|
|
if (NrgMbsReg == nullptr) { return false; } // Unable to allocate variables on heap
|
|
|
|
// Init defaults
|
|
for (uint32_t i = 0; i < NrgMbsParam.total_regs; i++) {
|
|
NrgMbsReg[i].datatype = ENERGY_MODBUS_DATATYPE;
|
|
for (uint32_t j = 0; j < ENERGY_MAX_PHASES; j++) {
|
|
NrgMbsReg[i].address[j] = nrg_mbs_reg_not_used;
|
|
}
|
|
}
|
|
if (NrgMbsParam.user_adds) {
|
|
NrgMbsUser = (NrgMbsUser_t*)calloc(NrgMbsParam.user_adds +1, sizeof(NrgMbsUser_t));
|
|
if (NrgMbsUser == nullptr) {
|
|
NrgMbsParam.user_adds = 0;
|
|
NrgMbsParam.total_regs = NRG_MBS_MAX_REGS;
|
|
} else {
|
|
// Init defaults
|
|
for (uint32_t i = 0; i < NrgMbsParam.user_adds; i++) {
|
|
NrgMbsUser[i].resolution = ENERGY_MODBUS_DECIMALS;
|
|
for (uint32_t j = 0; j < ENERGY_MAX_PHASES; j++) {
|
|
NrgMbsUser[i].data[j] = NAN;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// Get global parameters
|
|
val = root[PSTR("Baud")];
|
|
if (val) {
|
|
NrgMbsParam.serial_bps = val.getInt(); // 2400
|
|
}
|
|
val = root[PSTR("Config")];
|
|
if (val) {
|
|
const char *serial_config = val.getStr(); // 8N1
|
|
NrgMbsParam.serial_config = ConvertSerialConfig(ParseSerialConfig(serial_config));
|
|
}
|
|
val = root[PSTR("Poll")];
|
|
if (val) {
|
|
NrgMbsParam.ticker_poll = val.getUInt(); // 200
|
|
if (NrgMbsParam.ticker_poll < 100) { // Below 100 ms makes no sense as the comms usually is 9600bps
|
|
NrgMbsParam.ticker_poll = ENERGY_MODBUS_TICKER_POLL;
|
|
}
|
|
}
|
|
val = root[PSTR("Address")];
|
|
if (val) {
|
|
NrgMbsParam.devices = 0;
|
|
if (val.isArray()) {
|
|
// [1,2,3]
|
|
JsonParserArray arr = val.getArray();
|
|
for (auto value : arr) {
|
|
NrgMbsParam.device_address[NrgMbsParam.devices] = value.getUInt(); // 1
|
|
NrgMbsParam.devices++;
|
|
if (NrgMbsParam.devices >= ENERGY_MODBUS_MAX_DEVICES) { break; }
|
|
}
|
|
} else if (val) {
|
|
// 1
|
|
NrgMbsParam.device_address[0] = val.getUInt(); // 1
|
|
NrgMbsParam.devices++;
|
|
}
|
|
}
|
|
val = root[PSTR("Function")];
|
|
if (val) {
|
|
NrgMbsParam.function = val.getUInt(); // 4
|
|
}
|
|
|
|
// Get default energy registers
|
|
char register_name[32];
|
|
Energy.voltage_available = false; // Disable voltage is measured
|
|
Energy.current_available = false; // Disable current is measured
|
|
for (uint32_t names = 0; names < NRG_MBS_MAX_REGS; names++) {
|
|
val = root[GetTextIndexed(register_name, sizeof(register_name), names, kEnergyModbusValues)];
|
|
if (val) {
|
|
// "Voltage":0
|
|
// "Voltage":[0,2,4]
|
|
// "Voltage":{"R":0,"T":0,"F":0}
|
|
// "Voltage":{"R":[0,2,4],"T":0,"F":0}
|
|
uint32_t phase = 0;
|
|
if (val.isObject()) {
|
|
// {"R":0,"T":0,"F":0}
|
|
// {"R":[0,2,4],"T":0,"F":0}
|
|
// {"R":[0,2,4],"T":0,"M":10} - [LEGACY]
|
|
phase = EnergyModbusReadRegisterInfo(val.getObject(), names);
|
|
} else if (val.isArray()) {
|
|
// [0,2,4]
|
|
JsonParserArray arr = val.getArray();
|
|
for (auto value : arr) {
|
|
NrgMbsReg[names].address[phase] = value.getUInt();
|
|
phase++;
|
|
if (phase >= ENERGY_MAX_PHASES) { break; }
|
|
}
|
|
} else if (val) {
|
|
// 0
|
|
NrgMbsReg[names].address[0] = val.getUInt();
|
|
phase++;
|
|
}
|
|
if (phase > Energy.phase_count) {
|
|
Energy.phase_count = phase;
|
|
NrgMbsParam.devices = 1; // Only one device allowed with multiple phases
|
|
}
|
|
|
|
switch(names) {
|
|
case NRG_MBS_VOLTAGE:
|
|
Energy.voltage_available = true; // Enable if voltage is measured
|
|
if (1 == phase) {
|
|
Energy.voltage_common = true; // Use common voltage
|
|
}
|
|
break;
|
|
case NRG_MBS_CURRENT:
|
|
Energy.current_available = true; // Enable if current is measured
|
|
break;
|
|
case NRG_MBS_FREQUENCY:
|
|
if (1 == phase) {
|
|
Energy.frequency_common = true; // Use common frequency
|
|
}
|
|
break;
|
|
case NRG_MBS_TOTAL_ENERGY:
|
|
Settings->flag3.hardware_energy_total = 1; // SetOption72 - Enable hardware energy total counter as reference (#6561)
|
|
break;
|
|
}
|
|
|
|
#ifdef ENERGY_MODBUS_DEBUG
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: Idx %d (%s), R [%04X,%04X,%04X], T %d, F %d"),
|
|
names, register_name,
|
|
NrgMbsReg[names].address[0],
|
|
NrgMbsReg[names].address[1],
|
|
NrgMbsReg[names].address[2],
|
|
NrgMbsReg[names].datatype,
|
|
NrgMbsReg[names].factor);
|
|
#endif
|
|
|
|
}
|
|
}
|
|
|
|
// Get user defined registers
|
|
// "User":{"R":0x004E,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":3,"T":0,"F":0}
|
|
// "User":[{"R":0x004E,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":3,"T":0,"F":0},{"R":0x0024,"J":"PhaseAngle","G":"Phase Angle","U":"Deg","D":2,"T":0,"F":0}]
|
|
val = root[PSTR("User")];
|
|
if (val) {
|
|
if (val.isArray()) {
|
|
// [{"R":0x004E,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":3,"T":0,"F":0},{"R":0x0024,"J":"PhaseAngle","G":"Phase Angle","U":"Deg","D":2,"T":0,"F":0}]
|
|
JsonParserArray user_adds_arr = val.getArray();
|
|
uint32_t add_index = 0;
|
|
for (auto user_add_values : user_adds_arr) {
|
|
if (!user_add_values.isObject()) { break; }
|
|
if (EnergyModbusReadUserRegisters(user_add_values.getObject(), add_index)) {
|
|
add_index++;
|
|
} else {
|
|
AddLog(LOG_LEVEL_INFO, PSTR("NRG: Dropped JSON user input %d"), add_index +1);
|
|
NrgMbsParam.user_adds--;
|
|
}
|
|
}
|
|
} else if (val) {
|
|
// {"R":0x004E,"J":"ExportReactive","G":"Export Reactive","U":"kVArh","D":3,"T":0,"F":0}
|
|
if (val.isObject()) {
|
|
if (!EnergyModbusReadUserRegisters(val.getObject(), 0)) {
|
|
AddLog(LOG_LEVEL_INFO, PSTR("NRG: Dropped JSON user input"));
|
|
NrgMbsParam.user_adds--;
|
|
}
|
|
}
|
|
}
|
|
NrgMbsParam.total_regs = NRG_MBS_MAX_REGS + NrgMbsParam.user_adds;
|
|
}
|
|
|
|
// Fix variable boundaries
|
|
for (uint32_t i = 0; i < NrgMbsParam.total_regs; i++) {
|
|
if (NrgMbsReg[i].datatype >= NRG_DT_MAX) {
|
|
NrgMbsReg[i].datatype = ENERGY_MODBUS_DATATYPE;
|
|
}
|
|
}
|
|
if (NrgMbsParam.devices > 1) {
|
|
// Multiple devices have no common values
|
|
Energy.phase_count = NrgMbsParam.devices;
|
|
Energy.voltage_common = false; // Use no common voltage
|
|
Energy.frequency_common = false; // Use no common frequency
|
|
Settings->flag5.energy_phase = 1; // SetOption129 - (Energy) Show phase information
|
|
}
|
|
|
|
#ifdef ENERGY_MODBUS_DEBUG
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: Devices %d, RAM usage %d + %d + %d"),
|
|
NrgMbsParam.devices,
|
|
sizeof(NrgMbsParam),
|
|
NrgMbsParam.total_regs * sizeof(NrgMbsRegister_t),
|
|
NrgMbsParam.user_adds * sizeof(NrgMbsUser_t));
|
|
#endif
|
|
|
|
// NrgMbsParam.state = 0; // Set by calloc()
|
|
NrgMbsParam.phase = -1;
|
|
|
|
return true;
|
|
#endif // USE_RULES
|
|
return false;
|
|
}
|
|
|
|
bool EnergyModbusRegisters(void) {
|
|
if (EnergyModbusReadRegisters()) {
|
|
return true;
|
|
}
|
|
AddLog(LOG_LEVEL_INFO, PSTR("NRG: No valid modbus rule data"));
|
|
return false;
|
|
}
|
|
|
|
void EnergyModbusSnsInit(void) {
|
|
if (EnergyModbusRegisters()) {
|
|
EnergyModbus = new TasmotaModbus(Pin(GPIO_NRG_MBS_RX), Pin(GPIO_NRG_MBS_TX), Pin(GPIO_NRG_MBS_TX_ENA));
|
|
uint8_t result = EnergyModbus->Begin(NrgMbsParam.serial_bps, NrgMbsParam.serial_config);
|
|
if (result) {
|
|
if (2 == result) { ClaimSerial(); }
|
|
|
|
#ifdef ENERGY_MODBUS_TICKER
|
|
ticker_energy_modbus.attach_ms(NrgMbsParam.ticker_poll, EnergyModbusLoop);
|
|
#endif // ENERGY_MODBUS_TICKER
|
|
|
|
return;
|
|
}
|
|
}
|
|
TasmotaGlobal.energy_driver = ENERGY_NONE;
|
|
}
|
|
|
|
void EnergyModbusDrvInit(void) {
|
|
if (PinUsed(GPIO_NRG_MBS_RX) && PinUsed(GPIO_NRG_MBS_TX)) {
|
|
TasmotaGlobal.energy_driver = XNRG_29;
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Additional presentation
|
|
\*********************************************************************************************/
|
|
|
|
void EnergyModbusReset(void) {
|
|
for (uint32_t i = 0; i < NrgMbsParam.user_adds; i++) {
|
|
for (uint32_t j = 0; j < ENERGY_MAX_PHASES; j++) {
|
|
if (NrgMbsReg[NRG_MBS_MAX_REGS + i].address[0] != nrg_mbs_reg_not_used) {
|
|
NrgMbsUser[i].data[j] = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
uint32_t EnergyModbusResolution(uint32_t resolution) {
|
|
if (resolution >= NRG_RES_VOLTAGE) {
|
|
switch (resolution) {
|
|
case NRG_RES_VOLTAGE:
|
|
return Settings->flag2.voltage_resolution;
|
|
case NRG_RES_CURRENT:
|
|
return Settings->flag2.current_resolution;
|
|
case NRG_RES_POWER:
|
|
return Settings->flag2.wattage_resolution;
|
|
case NRG_RES_ENERGY:
|
|
return Settings->flag2.energy_resolution;
|
|
case NRG_RES_FREQUENCY:
|
|
return Settings->flag2.frequency_resolution;
|
|
case NRG_RES_TEMPERATURE:
|
|
return Settings->flag2.temperature_resolution;
|
|
case NRG_RES_HUMIDITY:
|
|
return Settings->flag2.humidity_resolution;
|
|
case NRG_RES_PRESSURE:
|
|
return Settings->flag2.pressure_resolution;
|
|
case NRG_RES_WEIGHT:
|
|
return Settings->flag2.weight_resolution;
|
|
}
|
|
}
|
|
return resolution;
|
|
}
|
|
|
|
void EnergyModbusShow(bool json) {
|
|
char value_chr[GUISZ];
|
|
float values[ENERGY_MAX_PHASES];
|
|
for (uint32_t i = 0; i < NrgMbsParam.user_adds; i++) {
|
|
uint32_t reg_index = NRG_MBS_MAX_REGS + i;
|
|
|
|
#ifdef ENERGY_MODBUS_DEBUG_SHOW
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: Idx %d, R [%04X,%04X,%04X], J '%s', G '%s', U '%s', D %d, V [%3_f,%3_f,%3_f]"),
|
|
i,
|
|
NrgMbsReg[reg_index].address[0],
|
|
NrgMbsReg[reg_index].address[1],
|
|
NrgMbsReg[reg_index].address[2],
|
|
NrgMbsUser[i].json_name,
|
|
NrgMbsUser[i].gui_name,
|
|
NrgMbsUser[i].gui_unit,
|
|
NrgMbsUser[i].resolution,
|
|
&NrgMbsUser[i].data[0],
|
|
&NrgMbsUser[i].data[1],
|
|
&NrgMbsUser[i].data[2]);
|
|
#endif
|
|
|
|
if ((NrgMbsReg[reg_index].address[0] != nrg_mbs_reg_not_used) && !isnan(NrgMbsUser[i].data[0])) {
|
|
for (uint32_t j = 0; j < ENERGY_MAX_PHASES; j++) {
|
|
values[j] = NrgMbsUser[i].data[j];
|
|
}
|
|
uint32_t resolution = EnergyModbusResolution(NrgMbsUser[i].resolution);
|
|
uint32_t single = (!isnan(NrgMbsUser[i].data[1]) && !isnan(NrgMbsUser[i].data[2])) ? 0 : 1;
|
|
|
|
#ifdef ENERGY_MODBUS_DEBUG_SHOW
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: resolution %d -> %d"), NrgMbsUser[i].resolution, resolution);
|
|
#endif
|
|
|
|
if (json) {
|
|
ResponseAppend_P(PSTR(",\"%s\":%s"), NrgMbsUser[i].json_name, EnergyFormat(value_chr, values, resolution, single));
|
|
#ifdef USE_WEBSERVER
|
|
} else {
|
|
if (strlen(NrgMbsUser[i].gui_name)) { // Skip empty GUI names
|
|
WSContentSend_PD(PSTR("{s}%s{m}%s %s{e}"),
|
|
NrgMbsUser[i].gui_name,
|
|
WebEnergyFormat(value_chr, values, resolution, single),
|
|
NrgMbsUser[i].gui_unit);
|
|
}
|
|
#endif // USE_WEBSERVER
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xnrg29(uint32_t function) {
|
|
bool result = false;
|
|
|
|
switch (function) {
|
|
#ifndef ENERGY_MODBUS_TICKER
|
|
// case FUNC_EVERY_200_MSECOND: // Energy ticker interrupt
|
|
case FUNC_EVERY_250_MSECOND: // Tasmota dispatcher
|
|
EnergyModbusLoop();
|
|
break;
|
|
#endif // No ENERGY_MODBUS_TICKER
|
|
case FUNC_JSON_APPEND:
|
|
EnergyModbusShow(1);
|
|
break;
|
|
#ifdef USE_WEBSERVER
|
|
#ifdef USE_ENERGY_COLUMN_GUI
|
|
case FUNC_WEB_COL_SENSOR:
|
|
#else // not USE_ENERGY_COLUMN_GUI
|
|
case FUNC_WEB_SENSOR:
|
|
#endif // USE_ENERGY_COLUMN_GUI
|
|
EnergyModbusShow(0);
|
|
break;
|
|
#endif // USE_WEBSERVER
|
|
case FUNC_ENERGY_RESET:
|
|
EnergyModbusReset();
|
|
break;
|
|
case FUNC_INIT:
|
|
EnergyModbusSnsInit();
|
|
break;
|
|
case FUNC_PRE_INIT:
|
|
EnergyModbusDrvInit();
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_MODBUS_ENERGY
|
|
#endif // USE_ENERGY_SENSOR
|