mirror of https://github.com/arendst/Tasmota.git
93 lines
5.4 KiB
Markdown
93 lines
5.4 KiB
Markdown
<img src="https://github.com/arendst/Tasmota/blob/master/tools/logo/TASMOTA_FullLogo_Vector.svg" alt="Logo" align="right" height="76"/>
|
|
|
|
# RELEASE NOTES
|
|
|
|
## Migration Information
|
|
|
|
See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
|
|
|
|
1. Migrate to **Sonoff-Tasmota 3.9.x**
|
|
2. Migrate to **Sonoff-Tasmota 4.x**
|
|
3. Migrate to **Sonoff-Tasmota 5.14**
|
|
4. Migrate to **Sonoff-Tasmota 6.x**
|
|
5. Migrate to **Tasmota 7.x**
|
|
|
|
--- Major change in parameter storage layout ---
|
|
|
|
6. Migrate to **Tasmota 8.1**
|
|
7. Migrate to **Tasmota 8.x**
|
|
|
|
While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v8.1.0 Doris** the Settings are re-allocated in such a way that fallback is only allowed and possible to release **v7.2.0 Constance**. Once at v7.2.0 you're on your own when downgrading even further.
|
|
|
|
## Supported Core versions
|
|
|
|
This release will be supported from ESP8266/Arduino library Core version **2.6.3 + e64cb61** due to reported security and stability issues on previous Core version. This will also support gzipped binaries.
|
|
|
|
Although it might still compile on previous Core versions all support will be removed in the near future.
|
|
|
|
## Support of TLS
|
|
|
|
To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT)
|
|
|
|
## Initial configuration tools
|
|
|
|
For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface only. Support for **WPS** and **SmartConfig** has been removed.
|
|
|
|
## Provided Binary Downloads
|
|
|
|
The following binary downloads have been compiled with ESP8266/Arduino library core version **2.6.3 + e64cb61**.
|
|
|
|
- **tasmota.bin** = The Tasmota version with most drivers. **RECOMMENDED RELEASE BINARY**
|
|
- **tasmota-BG.bin** to **tasmota-TW.bin** = The Tasmota version in different languages.
|
|
- **tasmota-lite.bin** = The Lite version without most drivers and sensors.
|
|
- **tasmota-knx.bin** = The Knx version without some features but adds KNX support.
|
|
- **tasmota-sensors.bin** = The Sensors version adds more useful sensors.
|
|
- **tasmota-ir** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
|
|
- **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support.
|
|
- **tasmota-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation**.
|
|
|
|
[List](MODULES.md) of embedded modules.
|
|
|
|
[Complete list](BUILDS.md) of available feature and sensors.
|
|
|
|
## Changelog
|
|
|
|
### Version 8.2.0.4
|
|
|
|
- Change HM-10 sensor type detection and add features (#7962)
|
|
- Change light scheme 2,3,4 cycle time speed from 24,48,72,... seconds to 4,6,12,24,36,48,... seconds (#8034)
|
|
- Change remove floating point libs from IRAM
|
|
- Change remove MQTT Info messages on restart for DeepSleep Wake (#8044)
|
|
- Change IRremoteESP8266 library updated to v2.7.5
|
|
- Fix possible Relay toggle on (OTA) restart
|
|
- Fix PWM flickering during wifi connection (#8046)
|
|
- Fix Zigbee sending wrong Sat value with Hue emulation
|
|
- Fix Zigbee crash with Occupancy sensor (#8089)
|
|
- Add Zigbee command ``ZbRestore`` to restore device configuration dumped with ``ZbStatus 2``
|
|
- Add Zigbee command ``ZbUnbind``
|
|
- Add Zigbee command ``ZbBindState`` and ``manuf``attribute
|
|
- Add Zigbee command ``ZbConfig`` and configuration in Settings
|
|
- Add commands ``CounterDebounceLow`` and ``CounterDebounceHigh`` to control debouncing (#8021)
|
|
- Add commands ``NrfPage``, ``NrfIgnore``, ``NrfScan`` and ``NrfBeacon`` to NRF24 Bluetooth driver (#8075)
|
|
- Add commands ``GlobalTemp`` and ``GlobalHum`` to init sensor data (#8152)
|
|
- Add command ``SetOption41 <x>`` to force sending gratuitous ARP every <x> seconds
|
|
- Add command ``SetOption90 1`` to disable non-json MQTT messages (#8044)
|
|
- Add command ``SetOption91 1`` to enable fading at startup / power on
|
|
- Add command ``Sensor10 0/1/2`` to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)
|
|
- Add command ``Sensor10 31..254`` to control BH1750 measurement time which defaults to 69 (#8016)
|
|
- Add command ``Sensor18 0..32000`` to control PMS5003 sensor interval to extend lifetime by Gene Ruebsamen (#8128)
|
|
- Add command ``DevGroupName`` to specify up to four Device Group Names (#8087)
|
|
- Add command ``DevGroupSend`` to send an update to a Device Group (#8093)
|
|
- Add command ``Ping`` (#7176)
|
|
- Add command ``Palette`` to add the ability to specify a palette of colors (#8150)
|
|
- Add support for unreachable (unplugged) Zigbee devices in Philips Hue emulation and Alexa
|
|
- Add support for 64x48 SSD1306 OLED (#6740)
|
|
- Add support for Seven Segment display using HT16K33 (#8116)
|
|
- Add support for up to four MQTT GroupTopics (#8014)
|
|
- Add support for longer template names
|
|
- Add support for an iAQ sensor (#8107)
|
|
- Add support for AS3935 Lightning Sensor by device111 (#8130)
|
|
- Add console command history (#7483, #8015)
|
|
- Add quick wifi reconnect using saved AP parameters when ``SetOption56 0`` (#3189)
|
|
- Add more accuracy to GPS NTP server (#8088)
|