mirror of https://github.com/arendst/Tasmota.git
74 lines
4.1 KiB
Markdown
74 lines
4.1 KiB
Markdown
<img src="https://github.com/arendst/Tasmota/blob/master/tools/logo/TASMOTA_FullLogo_Vector.svg" alt="Logo" align="right" height="76"/>
|
|
|
|
# RELEASE NOTES
|
|
|
|
## Migration Information
|
|
|
|
See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
|
|
|
|
1. Migrate to **Sonoff-Tasmota 3.9.x**
|
|
2. Migrate to **Sonoff-Tasmota 4.x**
|
|
3. Migrate to **Sonoff-Tasmota 5.14**
|
|
4. Migrate to **Sonoff-Tasmota 6.x**
|
|
5. Migrate to **Tasmota 7.x**
|
|
|
|
--- Major change in parameter storage layout ---
|
|
|
|
6. Migrate to **Tasmota 8.1**
|
|
7. Migrate to **Tasmota 8.x**
|
|
|
|
While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v8.1.0 Doris** the Settings are re-allocated in such a way that fallback is only allowed and possible to release **v7.2.0 Constance**. Once at v7.2.0 you're on your own when downgrading even further.
|
|
|
|
## Supported Core versions
|
|
|
|
This release will be supported from ESP8266/Arduino library Core version **2.7.2.1** due to reported security and stability issues on previous Core version. This will also support gzipped binaries.
|
|
|
|
Support of Core versions before 2.7.1 has been removed.
|
|
|
|
## Support of TLS
|
|
|
|
To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT)
|
|
|
|
## Initial configuration tools
|
|
|
|
For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface only. Support for **WPS** and **SmartConfig** has been removed.
|
|
|
|
## Provided Binary Downloads
|
|
|
|
The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.2.1**.
|
|
|
|
- **tasmota.bin** = The Tasmota version with most drivers. **RECOMMENDED RELEASE BINARY**
|
|
- **tasmota-BG.bin** to **tasmota-TW.bin** = The Tasmota version in different languages.
|
|
- **tasmota-lite.bin** = The Lite version without most drivers and sensors.
|
|
- **tasmota-knx.bin** = The Knx version without some features but adds KNX support.
|
|
- **tasmota-sensors.bin** = The Sensors version adds more useful sensors.
|
|
- **tasmota-ir** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
|
|
- **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support.
|
|
- **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version.
|
|
- **tasmota-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation**.
|
|
|
|
[List](MODULES.md) of embedded modules.
|
|
|
|
[Complete list](BUILDS.md) of available feature and sensors.
|
|
|
|
## Changelog
|
|
|
|
### Version 8.4.0.3
|
|
|
|
- Remove support for 1-step upgrade from versions before 6.6.0.11 to versions after 8.4.0.1
|
|
- Change references from http://thehackbox.org to http://ota.tasmota.com
|
|
- Change White blend mode moved to using ``SetOption 105`` instead of ``RGBWWTable``
|
|
- Fix ESP32 PWM range
|
|
- Fix display power control (#9114)
|
|
- Add command ``SetOption108 0/1`` to enable Teleinfo telemetry into Tasmota Energy MQTT (0) or Teleinfo only (1) - Add Zigbee better support for IKEA Motion Sensor
|
|
- Add command ``SetOption109 1`` to force gen1 Alexa mode, for Echo Dot 2nd gen devices only
|
|
- Add command ``Restart 2`` to halt system. Needs hardware reset or power cycle to restart (#9046)
|
|
- Add ESP32 Analog input support for GPIO32 to GPIO39
|
|
- Add Zigbee options to ``ZbSend`` ``Config`` and ``ReadCondig``
|
|
- Add Zigbee web gui widget for Temp/Humidity/Pressure sensors
|
|
- Add Zigbee web ui for power metering plugs
|
|
- Add better config corruption recovery (#9046)
|
|
- Add virtual CT for 4 channels lights, emulating a 5th channel
|
|
- Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113)
|
|
- Add command ``PowerDelta1`` to ``PowerDelta3`` to trigger on up to three phases (#9134)
|