Tasmota/lib/IRremoteESP8266-2.6.5/ReleaseNotes.md

19 KiB
Executable File

Release Notes

v2.6.5 (20190828)

[Bug Fixes]

  • IRMQTTServer: Remove duplicate MQTT_CLIMATE from HA discovery (#869)
  • Fujitsu: Ensure on() is called in common a/c framework. (#862)
  • Update strToModel() (#861)
  • IRMQTTServer: Add missing header file. (#858)
  • IRMQTTServer: Fix a compile error when HTML_PASSWORD_ENABLE is enabled. (#856)

[Features]

  • IRrecv: Allow tolerance percentage to be set at run-time. (#865)
  • Basic support for Daikin152 A/C protocol. (#874)
  • Teco: Add light, humid, & save support. (#871)
  • Detailed support for Amcor A/C protocol. (#836, #854)
  • IRMQTTServer: Add ability to report Vcc at the ESP chip. (#845)
  • Gree: Add timer support. (#849)
  • IRac/Mitsubishi A/C: Support wide swingh_t mode (#844)
  • IRMQTTServer: Generate protocol and bit size html selects (#838)

[Misc]

  • New example code to show how to use the IRac class to control A/Cs (#839)
  • Improve/fix swingh_t::kWide support (#846)
  • Kelvinator: Optimise code a little to save space. (#843)

v2.6.4 (20190726)

[Bug Fixes]

  • Fix some swing problems with the Mitsubishi HAVC protocol (#831)
  • Fix parameter ordering for Gree in common a/c code. (#815)
  • Fix parameters for Coolix in IRac::sendAc() (#829)
  • IRMQTTServer: Fix sending >64 bit codes. (#811)

[Features]

  • Daikin128: Full detailed support & common a/c support. (#832)
  • Midea: Support native temp units of Celsius & SwingV. (#823)
  • Gree: Support YBOFB models and bug fix. (#815)
  • Pioneer: Fix sendPioneer with Pioneer specific timings (#830)
  • Daikin128: Initial support for Daikin 17 Series/BRC52B63 (#828)
  • Coolix: Better toCommon() support. (#825)
  • Experimental detailed support for Daikin 176 bits (#816)
  • Add setting of output options to A/C classes. (#808)
  • Add invert flag support to Samsung AC (#807)

[Misc]

  • Daikin176: making some change on Daikin176 to work with IRMQTTServer (#826)
  • Reduce duplicate code to save (3K+) space. (#813)
  • Daikin176: Experiment Daikin176bits with IRMQTTServer (#824)
  • Update platformio.ini files for PlatformIO v4.0.0 (#812)
  • Change repo URLs to new location. (#806)
  • Move htmlEscape() to the IRutils namespace (#801)

v2.6.3 (20190704)

[Bug Fixes]

  • IRMQTTServer: REPLAY_DECODED_AC_MESSAGE not working. (#784, #797)
  • ESP32: Ensure IRrecv's GPIO is set to input mode. (#774)

[Features]

  • IRMQTTServer: Show available sketch space for OTA uploads. (#795)
  • Experimental detailed support for Electra/AUX protocol (#788)
  • IRMQTTServer: Ability to resend existing climate state via MQTT & HTTP (#784)
  • Daikin160: Add detailed & common a/c support. (#777)
  • Experimental detailed support for Neoclima protocol. (#767)
  • Gree: add WiFi and IFeel bits (#770)
  • Handle A/Cs with toggles better. (#758)
  • IRMQTTServer: Allow sending/receiving climate via JSON over MQTT. (#763)

[Misc]

  • Move converting of IR A/C messages out of example code. (#798)
  • Reduce example code size and complexity (#790)
  • Change ControlSamsungAC example to not use sendExtended() (#792)
  • IRMQTTServer: Add MQTT_CLIMATE_IR_SEND_ON_RESTART compile-time flag. (#784)
  • Refactor A/C's toString()'s to reduce code size. Saves ~3.5k (#782)
  • Add sanity tests for unexpected conditions in IRrecv. (#773)
  • IRMQTTServer: Fixed the HA config documentation (missing '-') (#776)
  • Improve mkkeywords tool. (#766)
  • Refactor with generic decode routines in IRrecv class. Saves ~7k. (#765)

v2.6.2 (20190616)

[Features]

  • Initial support for the ESP32 architecture & boards. (#742)
  • Add changable GPIO settings to IRMQTTServer. (#730)
  • IRMQTTServer: Enforce a repeat for all Coolix calls (#752)
  • Basic DAIKIN 160bit send and decode. (#754)
  • Add example code for a Smart(er) IR Repeater. (#740)
  • Enforce Samsung A/C Quiet & Powerful mutual exclusivity.

[Misc]

  • IRMQTTServer: Add some memory alloc safety checks. (#749)
  • Move some ToString() functions to IRac.cpp (#748)
  • Increase tolerance value for TCL112AC protocol. (#745)
  • Fix compiler warning in IRutils_test.cpp (#756)
  • Scrape Supported Protocols and generate SupportedProtocols.md (#755)
  • Make supported device info more organised. (#753)

v2.6.1 (20190609)

[Breaking Changes]

  • Major rework/breaking changes to Argo A/C support. (#705)

[Bug Fixes]

  • Correct set/getQuiet for Samsung A/C (#736)
  • Add missing on/off() to IRCoolixAC class. (#725)
  • Daikin set/getEye() uses wrong bit. (#711)
  • IRMQTTServer: Continue to use same Temperature units. (#710)
  • Fixed a bug with setMode()/getMode() for HAIER_AC. (#705)

[Features]

  • Add set/getPowerful for Samsung A/C (#736)
  • Add calibrate() to all the A/C classes. (#735)
  • IRMQTTServer: Add sequencing for sending MQTT IR commands. (#723)
  • Add support for Fujitsu AR-REB1E & AR-JW2 remotes. (#718)
  • Add Beta decodeTrotec() support. (#719)
  • Add experimental decodeArgo() support. (#717)
  • Support for Goodweather A/Cs. (#715)
  • Add DISABLE_CAPTURE_WHILE_TRANSMITTING feature to IRMQTTServer. (#713)
  • Support for Lixil Inax Toilet protocol. (#712)
  • Add set/getWeeklyTimerEnable() to Daikin (#711)
  • IRMQTTServer: Update Common A/C settings based on received IR messages. (#705)
  • Add day of week to DAIKIN protocol (#699)
  • Add limited support for Sharp A/C (#696)
  • SAMSUNG_AC: Make sure special power mode messages are sent. (#695)
  • Add set/getPowerful() (turbo) to DAIKIN216 (#693)

[Misc]

  • Add kPeriodOffset for CPU Freq of 160MHz. (#729)
  • Example code for a Dumb IR repeater. (#737)
  • Update swing handling for Fujitsu A/Cs. (#724)
  • Add function to convert decode_results to sendRaw() array. (#721)
  • Attempt to reduce heap fragmentation from strings. (#707)
  • Update Fujitsu A/C example code to safer settings (#716)
  • Enforce better const usage in IRUtils. (#708)
  • Attempt to reduce heap fragmentation by A/C toString()s. (#694)
  • Minor changes to DAIKIN216 timings and features. (#693)

v2.6.0 (20190430)

[Bug Fixes]

  • Fixed problem where LG protocol used wrong duty cycle for repeat. (#687)
  • Fix checksum calculation for Daikin protocols. (#678)
  • Fix the byte array version of sendGree() (#684, #685)
  • Fix artificial vs. real state creation on HaierAC. (#668, #671)
  • Fix issues caused by having MQTT_ENABLE set to false. (#677)
  • Fix compile problem when DEBUG is defined. (#673, #674)
  • Fix Minor bug with MQTT_ENABLE False condition (#654)

[Features]

  • Experimental support for DAIKIN216 (ARC433B69) (#690)
  • Experimental support for Mitsubishi Heavy Industries A/Cs. (#660, #665, #667)
  • Support more features of TCL A/C (#656)
  • Add LEGO(TM) Power Functions IR protocol. (#655)
  • Add Panasonic AC RKR model & Example (#649)
  • DAIKIN/IRDaikinESP overhaul and add Comfort mode support. (#678) WARNING: Previous sendDaikin() calls may not work. Please recapture codes or use kDaikinStateLengthShort for nbytes in those calls.
  • IRMQTTServer: Move MQTT server and other parameters to WifiManager. (#680) WARNING: Previous users may need to fully wipe/reset the SPIFFS/WifiManager settings by visiting http://<your_esp8266's_ip_address>/reset prior to or after update.
  • Add Wifi filtering options to IRMQTTServer. (#679)
  • Add advanced aircon/climate functionality to IRMQTTServer (#677)
  • Initial prototype of a common interface for all A/Cs. (#664)
  • Improve MQTT topic usage for feedback messages. (#663)
  • Add multiple independent GPIO sending support via MQTT. (#661)

[Misc]

  • Adjust kGreeHdrSpace to 4500 (#684, #686)
  • Add Home Assistant mqtt climate instructions. (#682)
  • Implement htmlEscape() to prevent XSS etc. (#681)
  • Add F() Macros (#670)
  • Update Daikin2's Cool mode min temp to 18C (#658)
  • Change per byte bit-order in Electra protocol. (#648)
  • Improve Daikin2 power on/off. (#647)

v2.5.6 (20190316)

[Bug Fixes]

  • Fix Coolix A/C Class to handle special states better. (#633, #624)

[Features]

  • Fix case style for recent A/C protocols. (#631)
  • Update IRsend::send() to include all simple protocols. (#629, #628)
  • Experimental basic support for 112 bit TCL AC messages (#627, #619)
  • Add support for TECO AC (#622)
  • Experimental support for Samsung 36 bit protocol (#625, #621)

[Misc]

  • Set Coolix to default to 1 repeat. (#637, #636, #624, #439)
  • Set Daikin2 modulation to 36.7kHz. (#635)
  • Refactor IRVestelAC class to use portable code. (#617)
  • Adjust Daikin2 timings and tolerance. (#616, #582)

v2.5.5 (20190207)

[Bug Fixes]

  • Fix decoding of Samsung A/C Extended messages. (#610)
  • Fix IRMQTTServer example to work with GPIO0 as IR_RX (#608)
  • Fix incorrect #define usage. (#597, #596)

[Features]

  • Add deep decoding/construction of Daikin2 messages (#600)
  • Added Old Vestel A/C support (56 Bits) with full functions. (#607)

[Misc]

  • Add ControlSamsungAC example code. (#599)
  • Add how to send a state/air-con to IRsendDemo.ino (#594)

v2.5.4 (20190102)

[Features]

  • Experimental basic support for 39 Byte Daikin A/C (#583)
  • Handle send() repeats in A/C classes. Improve Coolix support. (#580)
  • Add optional RX pin pullup and dump raw messages in IRMQTTServer.ino (#589)

[Misc]

  • Make auto_analyse_raw_data.py work with Python3 (#581)
  • Update CI/travis config due to esp8266 core 2.5.0 changes (#591)

v2.5.3 (20181123)

[Features]

  • Add deep support for the Hitachi 28-Byte A/C Protocol (#563)
  • Deep decoding for Whirlpool A/C (#572)
  • Improve security options for IRMQTTServer example. (#575)
  • Require a changed firmware password before upload. (#576)

[Misc]

  • Add missing '}' in output of Auto analyse. (#562)
  • Make A/C example code a bit more simple. (#571)

v2.5.2 (20181021)

[Bug Fixes]

  • Add missing send() method to IRPanasonicAC class. (#545)
  • Add missing sendWhirlpoolAC() to IRMQTTServer.ino (#558)

[Features]

  • Add IR receiving support to IRMQTTServer. (#543)
  • Pioneer support (#547)
  • Add support for a second LG protocol variant. (#552)
  • Support for short Panasonic A/C messages. (#553)
  • Add support for Panasonic CKP series A/Cs. (#554)
  • Experimental timer/clock support for Panasonic A/Cs. (#546)
  • Add Made With Magic (MWM) support (#557)

[Misc]

  • Grammar and typo fixes (#541, #549)
  • Increase Panasonic A/C message tolerances. (#542)
  • Added command mode2_decode in tools/ (#557)
  • General code style cleanup (#560)

v2.5.1 (20181002)

[Bug Fixes]

  • Correct the byte used for Samsung AC Swing. (#529)
  • Fix not sending Samsung A/C messages in IRMQTTServer. (#529)

[Features]

  • Experimental support for Electra A/C messages. (#528)
  • Experimental support for Panasonic A/C messages. (#535)
  • Samsung A/C fixes & improvements (#529)
  • IRMQTTServer v0.6.0 (#530)

[Misc]

  • Change required WifiManager lib version to v0.14
  • Add alias for RAWTICK to kRawTick. (#535)
  • Update sendLutron() status. (#515)
  • Remove leftover debug message in IRrecvDumpV2 (#526)

v2.5.0 (20180919)

[Bug Fixes]

  • Fix HTML menu error for GICABLE in IRMQTTServer. (#516)
  • Fix Mitsubishi A/C mode setting. (#514)
  • Add missing ',' in auto analyse tool generated code. (#513)
  • Fix Fujitsu checksum validation. (#501)
  • Remove errant Repeat debug statement in IRMQTTServer. (#507)

[Features]

  • Mitsubishi A/C decode improvements. (#514)
  • Basic support for Whirlpool A/C messages. (#511)
  • Basic support for Samsung A/C messages. (#512)
  • Experimental support for detailed Samsung A/C messages. (#521)
  • Experimental support for detailed Coolix A/C messages. (#518)
  • Experimental support for Lutron protocol. (#516)
  • Calculate and use average values for timings in analysing tool. (#513)

[Misc]

  • Style change from using #define's for constants to const kConstantName.
  • Improve the JVC example code.

v2.4.3 (20180727)

[Bug Fixes]

  • Handle Space Gaps better in auto analyse tool. (#482)
  • Correct min repeat for GICABLE in IRMQTTServer. (#494)

[Features]

  • Add static IP config option to IRMQTTServer (#480)
  • Full decoding/encoding support for the Haier YRW02 A/C. (#485 #486 #487)

[Misc]

  • Update LG (28-bit) HDR mark and space timings. (#492)
  • Spelling and grammar fixes (#491)

v2.4.2 (20180601)

[Bug Fixes]

  • Timing Fix: Update the period offset compensation.

[Features]

  • Improvements for IRMQTTServer example (#466)

v2.4.1 (20180520)

[Bug Fixes]

  • Fix crash in IRMQTTServer when compiled under Arduino IDE. (#455)
  • Default bit length not set for RCMM in IRMQTTServer example. (#456)
  • Bad acknowledgements for some A/C protocols in IRMQTTServer example. (#460)

[Features]

  • Allow disabling the use of delay() calls. (#450)
  • Initial support for G.I. Cable protocol. (#458)
  • Support of Hitachi A/C 13 & 53 byte messages. (#461)

[Misc]

  • Auto Analyse Raw Data script converted to Python. (#454)

v2.4.0 (20180407)

[Bug Fixes]

  • Add missing WiFi.begin() call to IRGCTCPServer example. (#433)
  • Add missing sendHaierAC() to IRMQTTServer example. (#434 & #444)
  • Make mqtt clientid unique in IRMQTTServer example. (#444)

[Features]

  • Initial Mitsubishi projector protocol support. (#442)
  • Experimental support of Hitachi A/C messages. (#445)
  • Improve transmission pulse modulation support. Allow disabling of transmission frequency modulation.(#439)

[Misc]

  • IRMQTTServer example improvements. (#444)

v2.3.3 (20180302)

[Bug Fixes]

  • Ensure the IR LED is off before we start. (#405)

[Features]

  • Experimental decode support for Gree HVAC units (#397)
  • Initial support for Haier A/Cs. (#409)
  • Improve timing accuracy of unit tests. (#403)
  • Rework matchData() to handle equal total data bit time protocols. (#408)

[Misc]

  • Add startup text to IRrecvDumpV2 and IRrecvDemo (#412)
  • Tweak timings on Fujitsu A/C header (#418)
  • AutoAnalyseRawData.sh: Add some support for handling larger than 64 bit codes. (#419)
  • Use better comments for send GPIO in examples. (#425)

v2.3.2 (20180126)

[Bug Fixes]

  • Integer underflow caused device not to respond in sendJVC() (#401)

[Features]

  • Initial support for sending & receiving Carrier HVAC codes. (#387)
  • Add Pronto HEX code support to gc_decode tool. (#388)

[Misc]

  • Make mDNS independent of MQTT in IRMQTTServer example code. (#390 #391)

v2.3.1 (20171229)

[Bug Fixes]

  • Setting #define SEND_FUJITSU_AC false caused a compilation error (#375)
  • Integer underflow caused huge space() in sendGeneric() (#381)

[Features]

  • Support sending & receiving Lasertag codes. (#374)
  • Reduce the library footprint by using a new sendGeneric() routine. (#373)

[Misc]

  • Lots of grammar & typo fixes. (#378)
  • Update keywords.txt for Arduino IDE users (#371)
  • Update pins in examples so they are compatible with Adafruit boards. (#383)

v2.3.0 (20171208)

[Bug Fixes]

  • Panasonic-based protocols had incorrect message gap. (#358)
  • Formatting error for large rawData values in example code. (#355)
  • Off-by-one error in payload_copy malloc. (#337)
  • Off-by-one error in unit test helper routines (#363)

[Features]

  • Support sending and receiving Midea A/C codes.
  • Support for receiving Kelvinator A/C codes. (#332)
  • Support more operation features for Daikin A/Cs.
  • Support for decoding Daikin A/Cs.
  • Support sending and receiving Toshiba A/Cs. (#333)
  • Support sending and receiving AR-DB1 Fujitsu A/C codes. (#367)
  • Add new AutoAnalyseRawData.sh & RawToGlobalCache.sh tools (#345) (#343)
  • Support for MagiQuest wands. (#365)

[Misc]

  • Add checksum verification to Kelvinator A/C decodes. (#348)
  • Changes to the threshold reporting of UNKNOWN messages (#347)
  • Major re-work of Daikin A/C support.
  • Sending for all A/Cs added to MQTT example code.
  • MQTT example code improvements. (#334)
  • IRrecvDumpV2 significant output improvements. (#363)
  • Improved unit test coverage for the library.

v2.2.1 (20171025)

[Features]

  • Support for sending and decoding Nikai TV messages. (#311, #313)
  • gc_decode: External utility to decode Global Cache codes. (#308, #312)
  • IRMQTTServer: Example code to send IR messages via HTTP & MQTT. (#316, #323)
  • Improve converting 64bit values to hexadecimal. (#318)

[Misc]

  • IRrecvDump.ino code is now deprecated. Use IRrecvDumpV2.ino instead. (#314)

v2.2.0 (20170922)

[Bug Fixes]

  • Add printing output of RC-MM and RC-5X protocols in example code. (#284)
  • LG timing improvements based on observations (#291)

[Features]

  • Automatic capture timing calibration for some protocols. (#268)
  • Support for creating & sending Trotec AC codes. (#279)
  • Support for creating & sending Argo Ulisse 13 DCI codes. (#280 #300)
  • Move to 2 microsecond timing resolution for capture of codes. (#287)
  • Capture buffer changes:
  • Size at runtime. (#276)
  • Message timeout at runtime. (#294)
  • Simplify creating & using a second buffer (#303)
  • New example code:
    • Trotec A/C (#279)
    • LG A/C units (#289)
    • Argo Ulisse 13 DCI codes. (#300)

v2.1.1 (20170711)

[Bug Fixes]

  • GlobalCache incorrectly using hardware offset for period calc. (#267)

[Features]

  • Support reporting of 'NEC'-like 32-bit protocols. e.g. Apple TV remote (#265)
  • Add an example of sendRaw() to IRsendDemo.ino (#270)

v2.1.0 (20170704)

[Features]

  • Support for sending Pronto IR codes. (#248)
  • Support for sending Fujitsu A/C codes. (#88)
  • Minor improvements to examples.

v2.0.3 (20170618)

[Bug fixes]

  • Capture buffer could become corrupt after large message, breaking subsequent decodes. (#253)

v2.0.2 (20170615)

[Bug fixes]

  • Correct decode issue introduced in v2.0.1 affecting multiple protocol decoders (#243)
  • Correct post-message gap for the Panasonic protocol(s) (#245)
  • Incorrect display of the decoded uint64_t value in the example code. (#245)

v2.0.1 (20170614)

[Bug fixes]

  • Decoding protocols when it doesn't detect a post-command gap, and there is no more data. (#243)
  • Incorrect minimum size calculation when there is no post-command gap. (#243)

v2.0.0 - 64 bit support and major improvements (20170612)

[Misc]

  • This is almost a complete re-write of the library.

[Features]

  • All suitable protocols now handle 64-bit data messages and are repeatable via an optional argument.
  • Unit tests for all protocols.
  • Far better and stricter decoding for most protocols.
  • Address & command decoding for protocols where that information is available.
  • Much more precise timing for generation of signals sent.
  • Lower duty-cycles for some protocols.
  • Several new protocols added, and some new sending and decoding routines for existing ones.
  • Ability to optionally chose which protocols are included, enabling faster decoding and smaller code footprints if desired.
  • Support for far larger capture buffers. (e.g. RAWLEN > 256)

[Bug fixes]

  • Numerous bug fixes.

v1.2.0 (20170429)

[Features]

  • Add ability to copy IR capture buffer, and continue capturing. Means faster and better IR command decoding.
  • Reduce IRAM usage by 28 bytes.
  • Improve capture of RC-MM & Panasonic protocols.
  • Upgrade IRrecvDumpV2 to new IR capture buffer. Much fewer corrupted/truncated IR messages.

v1.1.1 (20170413)

[Bug fixes]

  • Fix a reported problem when sending the LG protocol. Preemptive fix for possible similar cases.
  • Fix minor issues in examples.

[Features]

  • Add documentation to some examples to aid new people.
  • Add ALPHA support for RC-MM protocol. (Known to be currently not 100% working.)