9.7 KiB

Raw Blame History

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version.

Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.

Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
Upgrade to latest release (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

This release will be supported from ESP32/Arduino library Core version 2.0.2.1.

Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.2 have been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
tasmota-AF.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota/release-11.0.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32 based

The following binary downloads have been compiled with ESP32/Arduino library core version 2.0.3.

tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
tasmota32c3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3 and 4M+ flash.
tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
tasmota32-AF.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota32/release-11.0.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v11.0.0.4

Added

Command SetOption135 1 to disable LVGL splash screen
Command SetOption136 1 to disable single sensor reports from Tuya devices while keeping teleperiod reports #15216
Command SspmMap 0 to reset Sonoff SPM default mapping
Command TcpConnect <port><ip_address> to add client connection mode #14874
Command RfTimeout 100..60000 to disable duplicate RfReceive. Default 1000 #15061
Commands Sensor12 D0 .. D5, S0 .. S5 allowing differential or single-ended modes #15001
NeoPool commands NPpHMin, NPpHMax, NPpH, NPRedox, NPHydrolysis, NPIonization, NPChlorine and NPControl #15015
NeoPool system voltages display
TasmotaSerial implement end()
Support for up to four DS3502 digital potentiometers with command Wiper<x> 0..127
Support for ADE7880 3 phase energy monitor as used in Shelly 3EM #13515
Support for PCF85363 RTC as used in Shelly 3EM #13515
Full RTC chip integration and synchronisation when using UBX (=GPS), NTP or manual time
NeoPool JSON modules, power module, cell info, chlorine, conductivity and ionization
ESP32 Berry always enable rules
ESP32 Berry bootloop protection
ESP32 support for BLE Mi scale V1 #13517
ESP32 integrate Homekit in Bluetooth binary #14818
ESP32 Berry virtual Alexa hue device #14833
ESP32 TasmotaSerial uart mapping to support multiple begin() and implement getUart() #14981

Breaking Changed

Changed

Adafruit BusIO library from v1.0.10 to v1.11.0
TasmotaSerial library from v3.4.0 to v3.5.0 #14981
Sonoff SPM increase max number of relays supported to 32 (8 SPM-4Relay modules)
Extent number of pulsetimers from 8 to 32 #8266
Consolidate three RTC chip drivers (DS3231, BM8563, PCF85363) into one driver updating RTC as soon as possible after restart
Removed command Sensor33 and replaced by RtcNtpserver
DS3231 I2C address define USE_RTC_ADDR into DS3231_ADDRESS
Display of energy values in GUI use columns when define USE_ENERGY_COLUMN_GUI is enabled (default)
ESP8266 Shrinked tasmota-minimal.bin by removing all commands except Upgrade, Upload, OtaUrl, Seriallog, Weblog and Restart
ESP32 Arduino core from v2.0.2.2 to v2.0.3
ESP32 LVGL library from v8.1.0 to v8.2.0
ESP32 NimBLE library from v1.3.3 to v1.3.6
ESP32 update the internal Berry type system to sync with Skiars Berry repository. No expected impact on code, but .bec files need to be generated again #14811

Fixed

SSPM energy yesterday when zero
GPIO OptionE1 selection regression #14821
BL0939, BL0940 and BL0942 energy monitoring buffer miscompares resulting in wrong daily energy values regression from v9.5.0.8 #14829
Wiegand 34-bit rfid reading and presentation #14834
Orno WE517 power meter phase 2 current reactive #14841
NeoPool NPBit and NPRead/NPReadL output
ESP32 PowerOnState #15084

9.7 KiB Raw Blame History