mirror of https://github.com/arendst/Tasmota.git
122 lines
8.3 KiB
Markdown
Executable File
122 lines
8.3 KiB
Markdown
Executable File
[](https://epdiy.readthedocs.io/en/latest/?badge=latest) [](https://matrix.to/#/!GUXWriqsBKkWyXzsBK:matrix.vroland.de?via=matrix.vroland.de) [](https://join.slack.com/t/epdiy/shared_invite/zt-mw3iat5g-6jRylNrK2g79HSxeznvmPg)
|
|
|
|
EPDiy E-Paper Driver
|
|
=======================================
|
|
|
|
EPDiy is a driver board which talks to affordable E-Paper (or E-Ink) screens, which are usually sold as replacement screens for E-Book readers. Why are they interesting?
|
|
|
|
* Easy on the eyes and paper-like aesthetics
|
|
* No power consumption when not updating
|
|
* Sunlight-readable
|
|
|
|
Ready-made DIY modules for this size and with 4bpp (16 Grayscale) color support are currently quite expensive. This project uses Kindle replacement screens, which are available for 20$ (small) / 30$ (large) on ebay!
|
|
|
|
The EPDiy driver board targets multiple E-Paper displays. As the driving method for all matrix-based E-ink displays seems to be more or less the same, only the right connector and timings are needed. The EPDiy PCB v5 features 33pin, 34pin and a 39pin connectors, which allow to drive the following display types: ED097OC4, ED060SC4, ED097TC2, ED060SC7. For the full list of supported displays, refer to the table below.
|
|
|
|
Revision 5 of the board is optimized for the use with LiPo batteries, featuring a LiPo charger and ultra-low deep sleep current.
|
|
|
|
This project supports a driver for the ESP-IDF and Arduino. For installation instructions, please refer to the [documentation](https://epdiy.readthedocs.io/en/latest/getting_started.html#getting-your-board).
|
|
|
|
Building It
|
|
-----------
|
|
|
|
If you want to build a board right now, there are two possible routes:
|
|
|
|
- Use the new v5 PCB (`hardware/epaper-breakout/gerbers_v5.zip`).
|
|
**So far, I only tested a prototype of it. The newest gerbers should work, but are untested!**
|
|
**If you have tested them, please let me know!**
|
|
The BOM is available at (`hardware/epaper-breakout/BOM.csv`).
|
|
Positioning files for SMT assembly are available at (`hardware/epaper-breakout/gerbers/epaper-breakout-top-pos.csv`).
|
|
Please double check the part positioning and Rotation with your assembly service!
|
|
More information on the order process and where to find parts is in the [documentation](https://epdiy.readthedocs.io/en/latest/getting_started.html#getting-your-board).
|
|
|
|
Make sure to select the `V5` board revision in `idf.py menuconfig` when building the examples.
|
|
|
|
- Use the old v4 PCB (`hardware/epaper-breakout/gerbers_v4.zip`). This is a bit more fresh, but should work.
|
|
The BOM is available at (`hardware/epaper-breakout/BOM.csv`).
|
|
Positioning files for SMT assembly are available at (`hardware/epaper-breakout/gerbers/epaper-breakout-top-pos.csv`).
|
|
Please double check the part positioning and Rotation with your assembly service!
|
|
|
|
Make sure to select the `V4` board revision in `idf.py menuconfig` when building the examples.
|
|
|
|
Gettings Started
|
|
----------------
|
|
|
|
For instructions and more information visit the [documentation](https://epdiy.readthedocs.io/en/latest/getting_started.html)!
|
|
|
|
Join the Discussion
|
|
----------------
|
|
|
|
- [](https://matrix.to/#/!GUXWriqsBKkWyXzsBK:matrix.vroland.de?via=matrix.vroland.de) Matrix Community: +epdiy:matrix.vroland.de
|
|
- [](https://join.slack.com/t/epdiy/shared_invite/zt-mw3iat5g-6jRylNrK2g79HSxeznvmPg)
|
|
|
|
Displays
|
|
--------
|
|
|
|
|Name|Size|Resolution|Compatible|Connector|Pin count|Compatible since pcb version|Notes
|
|
| --: | --: | --: | --: | --: | --: |--: |--: |
|
|
|ED060SC4|6"|800 x 600|yes, tested|FH26W-39S-0.3SHW(60)|39|v2|
|
|
|ED097OC4|9.7"|1200 x 825|yes, tested|XF2M-3315-1A|33|V2|Cheap, inferior contrast
|
|
|ED097TC2|9.7"|1200 x 825|yes, tested|XF2M-3315-1A|33|V2|Slightly higher price, better contrast
|
|
|ED097OC1|9.7"|1200 x 825|yes (should work)|XF2M-3315-1A|33|V2|Cheap, inferior performance
|
|
|ED047TC1|4.7"|960 x 540|yes, tested|40-pin|40|LILYGO 4.7" EPD|Supported only by 4.7" e-paper board by LILYGO
|
|
|ED133UT2|13.3"|1600 x 1200|yes, tested|adapter board|39|V2|Adapter Board required, also PENG133D
|
|
|ED060XC3|6"|758 x 1024|yes, tested|THD0515-34CL-SN|34|V5|Cheapest, good contrast and resolution
|
|
|ED060XD4|6"|758 x 1024|yes, tested|THD0515-34CL-SN|34|V5|
|
|
|ED060XC5|6"|758 x 1024|yes (should work as ED060XC3)|THD0515-34CL-SN|34|V5|
|
|
|ED060XD6|6"|758 x 1024|yes (should work as ED060XC3)|THD0515-34CL-SN|34|V5|
|
|
|ED060XH2|6"|758 x 1024|yes (should work as ED060XC3)|THD0515-34CL-SN|34|V5|
|
|
|ED060XC9|6"|758 x 1024|yes (should work as ED060XC3)|THD0515-34CL-SN|34|V5|
|
|
|ED060KD1|6"|1072 x 1448|yes (should work as ED060XC3)|THD0515-34CL-SN|34|V5|
|
|
|ED060KC1|6"|1072 x 1448|yes (should work as ED060XC3)|THD0515-34CL-SN|34|V5|
|
|
|ED060SCF|6"|600 x 800|yes, tested|THD0515-34CL-SN|34|V5|Different flex cable shape
|
|
|ED060SCN|6"|600 x 800|yes (should work as ED060XC3)|THD0515-34CL-SN|34|V5|Different flex cable shape
|
|
|ED060SCP|6"|600 x 800|yes (should work as ED060XC3)|THD0515-34CL-SN|34|V5|Different flex cable shape
|
|
|ED060SC7|6"|600 x 800|yes (should work) |AXT434124|34|v5|
|
|
|ED060SCG|6"|600 x 800|yes (should work) |AXT434124|34|v5|
|
|
| ED060SCE | 6" | 600 x 800 | yes (should work) | AXT434124 | 34 | v5 |
|
|
| ED060SCM | 6" | 600 x 800 | yes (should work) | AXT434124 | 34 | v5 |
|
|
| ED060SCT | 6" | 600 x 800 | yes, tested | AXT434124 | 34 | v5 |
|
|
|
|
**Please note that board revision v5 is still in prototype stage!**
|
|
|
|
Troubleshooting
|
|
---------------
|
|
|
|
The following list is compiled from past experiences and GitHub issues:
|
|
* **The displayed image displays only part of the image.** Make sure to select the correct display type as described [here](https://epdiy.readthedocs.io/en/latest/getting_started.html#selecting-a-display-type).
|
|
* **The existing image fades / darkens when updating a partial screen region.** Make sure the VCOM voltage is [calibrated](https://epdiy.readthedocs.io/en/latest/getting_started.html#calibrate-vcom) for your specific display.
|
|
* **The second third of the image is replaced with the last third.** This seems to be a timing issue we could not yet quite figure out the reason for. For a workarround or suggestions please [join the discussion](https://github.com/vroland/epdiy/issues/15).
|
|
* **The ESP does not boot correctly when external periperals are connected.** Make sure not to pull GPIO12 high during boot, as it is a strapping pin internal voltage selection (https://github.com/vroland/epdiy/issues/17).
|
|
|
|
More on E-Paper Displays
|
|
------------------------
|
|
|
|
* List of E-Paper devices and their screens: https://e-ink-reader.ru/chg_dsp_en.php (thanks, @mcer12)
|
|
* Reverse engineering of display pins, possible starting point for alternative drivers: https://linux-sunxi.org/PocketBook_Touch_Lux_3 (thanks, @mcer12)
|
|
* Reverse engineering and explanation on driving EPDs: http://essentialscrap.com/eink/index.html
|
|
* Earlier take on driving 6" EPDs with an ESP32, basis of original power circuit: http://spritesmods.com/?art=einkdisplay&page=1
|
|
* Related Hackaday projects: https://hackaday.io/project/21607 https://hackaday.io/project/11537
|
|
|
|
If you know any other useful resources or have suggestions, please comment on #31!
|
|
|
|
Hackaday Project
|
|
----------------
|
|
|
|
For more details, see the project page on Hackaday: https://hackaday.io/project/168193-epdiy-976-e-paper-controller
|
|
|
|
|
|
|
|
|
|
|
|
Licenses
|
|
--------
|
|
|
|
The weather example is Copyright (c) David Bird 2018 (except for minor modifications). Please refer to `examples/weather/README.md` for details.
|
|
|
|
The board and schematic are licensed under a <a rel="license" href="https://creativecommons.org/licenses/by-sa/4.0/"><img alt="Creative Commons License" style="border-width:0" src="https://i.creativecommons.org/l/by-sa/4.0/80x15.png" /></a> <a rel="license" href="https://creativecommons.org/licenses/by-sa/4.0/">Creative Commons Attribution-ShareAlike 4.0 International License</a>.
|
|
|
|
Firmware and remaining examples are licensed under the terms of the GNU GPL version 3.
|
|
Utilities are licensed under the terms of the MIT license.
|
|
|