mirror of https://github.com/arendst/Tasmota.git
161 lines
10 KiB
Markdown
161 lines
10 KiB
Markdown
<img src="https://github.com/arendst/Tasmota/blob/master/tools/logo/TASMOTA_FullLogo_Vector.svg" alt="Logo" align="right" height="76"/>
|
|
|
|
# RELEASE NOTES
|
|
|
|
## Migration Information
|
|
|
|
**This version removes support for direct migration from versions before v8.1.0 (Doris)**
|
|
|
|
See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version.
|
|
|
|
**Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial.** If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.
|
|
|
|
Pay attention to the following version breaks due to dynamic settings updates:
|
|
|
|
1. Migrate to **Sonoff-Tasmota 3.9.x**
|
|
2. Migrate to **Sonoff-Tasmota 4.x**
|
|
3. Migrate to **Sonoff-Tasmota 5.14**
|
|
4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
|
|
5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)
|
|
|
|
--- Major change in parameter storage layout ---
|
|
|
|
6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)
|
|
|
|
--- Major change in internal GPIO function representation ---
|
|
|
|
7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
|
|
8. Upgrade to **latest release** (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)
|
|
|
|
While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**.
|
|
|
|
## Supported Core versions
|
|
|
|
This release will be supported from ESP8266/Arduino library Core version **2.7.4.9** due to reported security and stability issues on previous Core version. This will also support gzipped binaries.
|
|
|
|
This release will be supported from ESP32/Arduino library Core version **2.0.2.1**.
|
|
|
|
Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.2 have been removed.
|
|
|
|
## Support of TLS
|
|
|
|
In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT)
|
|
|
|
## Initial configuration tools
|
|
|
|
For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface.
|
|
|
|
## Initial installation
|
|
|
|
Easy initial installation of Tasmota can be performed using the [Tasmota WebInstaller](https://tasmota.github.io/install/).
|
|
|
|
## Provided Binary Downloads
|
|
|
|
### ESP8266 or ESP8285 based
|
|
The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.4.9**.
|
|
|
|
- **tasmota.bin** = The Tasmota version with most drivers for 1M+ flash. **RECOMMENDED RELEASE BINARY**
|
|
- **tasmota-AF.bin** to **tasmota-VN.bin** = The Tasmota version in different languages for 1M+ flash.
|
|
- **tasmota-lite.bin** = The Lite version without most drivers and sensors for 1M+ flash.
|
|
- **tasmota-knx.bin** = The Knx version without some features but adds KNX support for 1M+ flash.
|
|
- **tasmota-sensors.bin** = The Sensors version adds more useful sensors for 1M+ flash.
|
|
- **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
|
|
- **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support for 1M+ flash.
|
|
- **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
|
|
- **tasmota-zigbee.bin** = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.
|
|
|
|
Above binaries are also available as gzipped version allowing faster uploads.
|
|
|
|
Latest released binaries can be downloaded from
|
|
- https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware
|
|
- http://ota.tasmota.com/tasmota/release
|
|
|
|
Historical binaries can be downloaded from
|
|
- http://ota.tasmota.com/tasmota/release-11.0.0
|
|
|
|
The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz``
|
|
|
|
### ESP32 based
|
|
The following binary downloads have been compiled with ESP32/Arduino library core version **2.0.3**.
|
|
|
|
- **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. **RECOMMENDED RELEASE BINARY**
|
|
- **tasmota32c3.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3 and 4M+ flash.
|
|
- **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
|
|
- **tasmota32-AF.bin** to **tasmota32-VN.bin** = The Tasmota version in different languages for 4M+ flash.
|
|
- **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
|
|
- **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support for 4M+ flash.
|
|
- **tasmota32-lvgl.bin** = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
|
|
- **tasmota32-webcam.bin** = The Webcam version adds webcam support for 4M+ flash.
|
|
- **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support for 4M+ flash.
|
|
|
|
Latest released binaries can be downloaded from
|
|
- https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware
|
|
- http://ota.tasmota.com/tasmota32/release
|
|
|
|
Historical binaries can be downloaded from
|
|
- http://ota.tasmota.com/tasmota32/release-11.0.0
|
|
|
|
The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin``
|
|
|
|
## Additional information
|
|
|
|
[List](MODULES.md) of embedded modules.
|
|
|
|
[Complete list](BUILDS.md) of available feature and sensors.
|
|
|
|
## Changelog v11.0.0.5
|
|
### Added
|
|
- Command ``SetOption135 1`` to disable LVGL splash screen
|
|
- Command ``SetOption136 1`` to disable single sensor reports from Tuya devices while keeping teleperiod reports [#15216](https://github.com/arendst/Tasmota/issues/15216)
|
|
- Command ``SspmMap 0`` to reset Sonoff SPM default mapping
|
|
- Command ``TcpConnect <port><ip_address>`` to add client connection mode [#14874](https://github.com/arendst/Tasmota/issues/14874)
|
|
- Command ``RfTimeout 100..60000`` to disable duplicate RfReceive. Default 1000 [#15061](https://github.com/arendst/Tasmota/issues/15061)
|
|
- Command ``IfxSensor 1`` to send non-teleperiod data to influxdb
|
|
- Commands ``Sensor12 D0 .. D5, S0 .. S5`` allowing differential or single-ended modes [#15001](https://github.com/arendst/Tasmota/issues/15001)
|
|
- NeoPool commands ``NPpHMin``, ``NPpHMax``, ``NPpH``, ``NPRedox``, ``NPHydrolysis``, ``NPIonization``, ``NPChlorine`` and ``NPControl`` [#15015](https://github.com/arendst/Tasmota/issues/15015)
|
|
- NeoPool system voltages display
|
|
- TasmotaSerial implement ``end()``
|
|
- Support for improv as used by esp-web-tools
|
|
- Support for up to four DS3502 digital potentiometers with command ``Wiper<x> 0..127``
|
|
- Support for ADE7880 3 phase energy monitor as used in Shelly 3EM [#13515](https://github.com/arendst/Tasmota/issues/13515)
|
|
- Support for PCF85363 RTC as used in Shelly 3EM [#13515](https://github.com/arendst/Tasmota/issues/13515)
|
|
- Full RTC chip integration and synchronisation when using UBX (=GPS), NTP or manual time
|
|
- NeoPool JSON modules, power module, cell info, chlorine, conductivity and ionization
|
|
- ESP32 Berry always enable rules
|
|
- ESP32 Berry bootloop protection
|
|
- ESP32 support for BLE Mi scale V1 [#13517](https://github.com/arendst/Tasmota/issues/13517)
|
|
- ESP32 integrate Homekit in Bluetooth binary [#14818](https://github.com/arendst/Tasmota/issues/14818)
|
|
- ESP32 Berry virtual Alexa hue device [#14833](https://github.com/arendst/Tasmota/issues/14833)
|
|
- ESP32 TasmotaSerial uart mapping to support multiple ``begin()`` and implement ``getUart()`` [#14981](https://github.com/arendst/Tasmota/issues/14981)
|
|
|
|
### Breaking Changed
|
|
|
|
### Changed
|
|
- Adafruit BusIO library from v1.0.10 to v1.11.0
|
|
- TasmotaSerial library from v3.4.0 to v3.5.0 [#14981](https://github.com/arendst/Tasmota/issues/14981)
|
|
- Sonoff SPM increase max number of relays supported to 32 (8 SPM-4Relay modules)
|
|
- Extent number of pulsetimers from 8 to 32 [#8266](https://github.com/arendst/Tasmota/issues/8266)
|
|
- Consolidate three RTC chip drivers (DS3231, BM8563, PCF85363) into one driver updating RTC as soon as possible after restart
|
|
- Removed command ``Sensor33`` and replaced by ``RtcNtpserver``
|
|
- Remove support for Internet Explorer by allowing ECMAScript6 syntax using less JavaScript code bytes [#15280](https://github.com/arendst/Tasmota/issues/15280)
|
|
- DS3231 I2C address define ``USE_RTC_ADDR`` into ``DS3231_ADDRESS``
|
|
- Display of energy values in GUI use columns when define ``USE_ENERGY_COLUMN_GUI`` is enabled (default)
|
|
- ESP8266 Shrinked tasmota-minimal.bin by removing all commands except ``Upgrade``, ``Upload``, ``OtaUrl``, ``Seriallog``, ``Weblog`` and ``Restart``
|
|
- ESP32 Arduino core from v2.0.2.2 to v2.0.3
|
|
- ESP32 LVGL library from v8.1.0 to v8.2.0
|
|
- ESP32 NimBLE library from v1.3.3 to v1.3.6
|
|
- ESP32 update the internal Berry type system to sync with Skiars Berry repository. No expected impact on code, but .bec files need to be generated again [#14811](https://github.com/arendst/Tasmota/issues/14811)
|
|
|
|
### Fixed
|
|
- SSPM energy yesterday when zero
|
|
- GPIO OptionE1 selection regression [#14821](https://github.com/arendst/Tasmota/issues/14821)
|
|
- BL0939, BL0940 and BL0942 energy monitoring buffer miscompares resulting in wrong daily energy values regression from v9.5.0.8 [#14829](https://github.com/arendst/Tasmota/issues/14829)
|
|
- Wiegand 34-bit rfid reading and presentation [#14834](https://github.com/arendst/Tasmota/issues/14834)
|
|
- Orno WE517 power meter phase 2 current reactive [#14841](https://github.com/arendst/Tasmota/issues/14841)
|
|
- NeoPool NPBit and NPRead/NPReadL output
|
|
- HX711 false readings by removing large deviations
|
|
- ESP32 save settings after OTA upload regression from v10.0.0.3
|
|
- ESP32 PowerOnState [#15084](https://github.com/arendst/Tasmota/issues/15084)
|
|
|
|
### Removed
|