mirror of https://github.com/arendst/Tasmota.git
28 lines
1.1 KiB
Markdown
28 lines
1.1 KiB
Markdown
# ENS210
|
|
Arduino library for the ENS210 temperature & humidity sensor with I2C interface from ScioSense
|
|
|
|
## Introduction
|
|
This project is an Arduino *library*. It implements a driver with examples for the ENS210.
|
|
The ENS210 chip is a digital temperature & humidity sensor with an I2C interface.
|
|
The driver in this Arduino library is based on the code supplied by *Sciosense*, the manufacturer of the chip.
|
|
|
|
Note that the ENS210 requires a supply voltage of 1.71V .. 1.98V.
|
|
|
|
## Links
|
|
The ENS210 is made by [Sciosense](http://www.sciosense.com).
|
|
- The datasheet of the ENS210 is not yet released
|
|
|
|
## Prerequisites
|
|
It is assumed that
|
|
- The Arduino IDE has been installed.
|
|
If not, refer to "Install the Arduino Desktop IDE" on the
|
|
[Arduino site](https://www.arduino.cc/en/Guide/HomePage).
|
|
- The library directory is at its default location.
|
|
For me, Christoph, that is `C:\Users\christoph\Documents\Arduino\libraries`.
|
|
|
|
## Build an example
|
|
To build an example sketch
|
|
- (Re)start Arduino.
|
|
- Open File > Example > Examples from Custom Libraries > ENS210 > ENS210basic.
|
|
- Make sure Tools > Board lists the correct board.
|
|
- Select Sketch > Verify/Compile. |