mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/RELEASENOTES.md

8.4 KiB
Raw Blame History

Logo

RELEASE NOTES

Migration Information

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14
  4. Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
  5. Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

  1. Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

  1. Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

  • tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
  • tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
  • tasmota-lite.bin = The Lite version without most drivers and sensors.
  • tasmota-knx.bin = The Knx version without some features but adds KNX support.
  • tasmota-sensors.bin = The Sensors version adds more useful sensors.
  • tasmota-ir = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
  • tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
  • tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version.
  • tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota/release for ESP8266 or http://ota.tasmota.com/tasmota32/release for ESP32. The links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

List of embedded modules.

Complete list of available feature and sensors.

Changelog v9.2.0.3

Added

  • Command CTRange to specify the visible CT range the bulb is capable of #10311
  • Command RuleTimer0 to access all RuleTimers at once #10352
  • Command VirtualCT to simulate or fine tune CT bulbs with 3,4,5 channels #10311
  • Command SetOption43 1..255 to control Rotary step (#10407)
  • Command SetOption118 1 to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default #10353
  • Command SetOption119 1 to remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic #10355
  • Milliseconds to console output #10152
  • Gpio Option_a1 enabling PWM2 high impedance if powered off as used by Wyze bulbs #10196
  • Rotary No Pullup GPIO selection Rotary A/B_n #10407
  • BSSID and Signal Strength Indicator to GUI wifi scan result #10253
  • Support for P9813 RGB Led MOSFET controller #10104
  • Support for GPIO option selection
  • Support for FTC532 8-button touch controller by Peter Franck #10222
  • Support for BS814A-2 8-button touch buttons by Peter Franck #10447
  • Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck #10481
  • Support for Afrikaans language translations by Christiaan Heerze
  • Support for IR inverted leds using #define IR_SEND_INVERTED true #10301
  • Support for disabling 38kHz IR modulation using #define IR_SEND_USE_MODULATION false #10301
  • Support for SPI display driver for ST7789 TFT by Gerhard Mutz #9037
  • Support for time proportioned (#define USE_TIMEPROP) and optional PID (#define USE_PID) relay control #10412
  • Support rotary encoder on Shelly Dimmer #10407
  • Support character # to be replaced by space-character in command Publish topic #10258
  • Basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin #8630
  • SPI display driver SSD1331 Color oled by Jeroen Vermeulen #10376

Breaking Changed

  • ESP32 switch from default SPIFFS to default LittleFS file system loosing current (zigbee) files
  • Replaced MFRC522 13.56MHz rfid card reader GPIO selection from SPI CS by RC522 CS
  • Replaced NRF24L01 GPIO selection from SPI CS by NRF24 CS and SPI DC by NRF24 DC
  • Replaced ILI9341 GPIO selection from SPI CS by ILI9341 CS and SPI DC by ILI9341 DC
  • Replaced ST7789 GPIO selection from SPI CS by ST7789 CS and SPI DC by ST7789 DC
  • Replaced ILI9488 GPIO selection from SPI CS by ILI9488_CS
  • Replaced EPaper29 GPIO selection from SPI CS by EPaper29 CS
  • Replaced EPaper42 GPIO selection from SPI CS by EPaper42 CS
  • Replaced SSD1351 GPIO selection from SPI CS by SSD1351 CS
  • Replaced RA8876 GPIO selection from SPI CS by RA8876 CS

Changed

  • Logging from heap to stack freeing 700 bytes RAM
  • Disabled USE_LIGHT light support for ZBBridge saving 17.6kB #10374
  • Force initial default state SetOption57 1 to scan wifi network every 44 minutes for strongest signal #10395

Fixed

  • Redesign syslog and mqttlog using log buffer #10164
  • Shutter stop issue #10170
  • Scripter script_sub_command #10181
  • Scripter JSON variable above 32 chars #10193
  • Shelly Dimmer power on state #10154 #10182
  • Wemo emulation for single devices #10165 #10194
  • ESP32 LoadStoreError when using #define USER_TEMPLATE #9506
  • Compile error when #ifdef USE_IR_RECEIVE is disabled regression from 9.1.0.2
  • Prometheus memory leak #10221