Tasmota/RELEASENOTES.md

12 KiB

Logo

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version.

Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.

Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14 (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
  4. Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
  5. Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)

--- Major change in parameter storage layout ---

  1. Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)

--- Major change in internal GPIO function representation ---

  1. Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
  2. Upgrade to latest release (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.5 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

This release will be supported from ESP32/Arduino library Core version 2.0.14.

Support of ESP8266 Core versions before 2.7.5 and ESP32 Core versions before 2.0.14 have been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.5.

  • tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
  • tasmota-4M.bin = The Tasmota version with most drivers and filesystem for 4M+ flash.
  • tasmota-AD.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
  • tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
  • tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
  • tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
  • tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
  • tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
  • tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
  • tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32, ESP32-C3, ESP32-S2 and ESP32-S3 based

The following binary downloads have been compiled with ESP32/Arduino library core version 2.0.14.

  • tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
  • tasmota32xy.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 and 4M+ flash.
  • tasmota32xycdc.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 with serial over embedded USB CDC only and 4M+ flash.
  • tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
  • tasmota32-AD.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
  • tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
  • tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
  • tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
  • tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
  • tasmota32-nspanel.bin = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support.
  • tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
  • tasmota32-zbbridgepro.bin - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support.

ESP32-C2 and ESP32-C6 based

The following binary downloads have been compiled with ESP32/Arduino library core version 3.0.0-alpha3.

  • tasmota32c2-arduino30.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 and 4M+ flash.
  • tasmota32c6cdc-arduino30.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C6 with serial over embedded USB CDC or hardware USB and 4M+ flash.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

The latter links can be used for OTA upgrades too like OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v13.3.0.3

Added

  • Support for CST816S touch interface #20213
  • Support for Sonoff Basic R4 Magic Switch #20247
  • Display of active drivers using command status 4
  • GPIO Viewer to see realtime GPIO states. Enable with define USE_GPIO_VIEWER
  • GPIO Viewer user selection of assets website now defaults to https://ota.tasmota.com/tasmota|tasmota32/gpio_viewer/assets
  • NeoPool hydrolysis FL1 and Redox flag #20258
  • Support negative power on BL0942 using index 5..8 #20322
  • Support for pipsolar inverter #20408
  • Support for HardwareSerial invert #15461
  • SML support for IM350 #20474
  • ESP32 used UART information
  • ESP32 experimental support GPIOViewer when define USE_ESP32_GPIO_VIEWER is enabled
  • ESP32 MI BLE support for Xiaomi LYWSD02MMC #20381
  • Berry GPIO viewer initial version using async webserver #20416
  • Berry introspect.set() for class attributes #20339
  • Berry support for tcpclientasync in tcpserver #20401
  • Berry tasmota.urlbecload(url:string) -> bool #20412
  • Berry gpio.read_pwm and gpio.read_pwm_resolution #20414
  • Berry gpio.get_pin_type and gpio.ger_pin_type_index #20415
  • Berry string to bytes() #20420
  • Berry button to dynamically load GPIO Viewer with Berry backend #20424
  • Berry debug_panel.tapp to display real-time heap and wifi rssi #20436
  • Berry webserver.header to read browser sent headers #20447
  • Berry provide lightweight options for tasmota.wifi/eth/memory/rtc #20448
  • Berry tasmota.webcolor #20454
  • Berry debug.caller #20470
  • LVGL lv.str_arr #20480
  • HASPmota haspmota.page_show() to change page #20333
  • HASPmota type chart #20372
  • Matter support for password for remote Tasmota devices #20296

Breaking Changed

  • Refactoring of Berry animate module for WS2812 Leds #20236

Changed

  • ESP8266 platform update from 2023.04.00 to 2024.01.00 #20467
  • ESP8266 Framework (Arduino Core) from v2.7.4.9 to v2.7.5 #20467
  • ESP32 platform update from 2023.11.01 to 2024.01.00 #20445
  • Renamed button "Consoles" to "Tools"
  • Support syslog updates every sleep or every second if #define SYSLOG_UPDATE_SECOND #20260
  • Web file upload response on upload error #20340
  • Header Host is now collected by Webserver #20446
  • Webcam tweaks #20451

Fixed

  • CVE-2021-36603 Cross Site Scripting (XSS) vulnerability #12221
  • Syslog server warning caused by lack of field and hostname starting with 'z' #14689
  • Support for Domoticz floor/room topics. Regression from v12.0.1 #20299
  • Scripter memory leak in >w x (#20473)#20473
  • Zigbee ramdom crash in main page (#20481)#20473
  • ESP32 piezo ceramic buzzer doesn't buzz #20118
  • ESP32 Zigbee Aqara attributes #20452
  • LVGL fix type for lv_imgbtn #20354
  • Berry claiming UART0 if needed #20324
  • Matter Contact sensor was not triggering any update #20232

Removed