mirror of https://github.com/arendst/Tasmota.git
138 lines
7.8 KiB
Markdown
138 lines
7.8 KiB
Markdown
<picture>
|
|
<source media="(prefers-color-scheme: dark)" srcset="./tools/logo/TASMOTA_FullLogo_Vector_White.svg">
|
|
<img alt="Logo" src="./tools/logo/TASMOTA_FullLogo_Vector.svg" align="right" height="76">
|
|
</picture>
|
|
|
|
# RELEASE NOTES
|
|
|
|
## Migration Information
|
|
|
|
**This version removes support for direct migration from versions before v8.1.0 (Doris)**
|
|
|
|
See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version.
|
|
|
|
**Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial.** If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.
|
|
|
|
Pay attention to the following version breaks due to dynamic settings updates:
|
|
|
|
1. Migrate to **Sonoff-Tasmota 3.9.x**
|
|
2. Migrate to **Sonoff-Tasmota 4.x**
|
|
3. Migrate to **Sonoff-Tasmota 5.14** (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
|
|
4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
|
|
5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)
|
|
|
|
--- Major change in parameter storage layout ---
|
|
|
|
6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)
|
|
|
|
--- Major change in internal GPIO function representation ---
|
|
|
|
7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
|
|
8. Upgrade to **latest release** (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)
|
|
|
|
While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**.
|
|
|
|
## Supported Core versions
|
|
|
|
This release will be supported from ESP8266/Arduino library Core version **2.7.4.9** due to reported security and stability issues on previous Core version. This will also support gzipped binaries.
|
|
|
|
This release will be supported from ESP32/Arduino library Core version **2.0.14**.
|
|
|
|
Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.14 have been removed.
|
|
|
|
## Support of TLS
|
|
|
|
In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT)
|
|
|
|
## Initial configuration tools
|
|
|
|
For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface.
|
|
|
|
## Initial installation
|
|
|
|
Easy initial installation of Tasmota can be performed using the [Tasmota WebInstaller](https://tasmota.github.io/install/).
|
|
|
|
## Provided Binary Downloads
|
|
|
|
### ESP8266 or ESP8285 based
|
|
The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.4.9**.
|
|
|
|
- **tasmota.bin** = The Tasmota version with most drivers for 1M+ flash. **RECOMMENDED RELEASE BINARY**
|
|
- **tasmota-4M.bin** = The Tasmota version with most drivers and filesystem for 4M+ flash.
|
|
- **tasmota-AD.bin** to **tasmota-VN.bin** = The Tasmota version in different languages for 1M+ flash.
|
|
- **tasmota-lite.bin** = The Lite version without most drivers and sensors for 1M+ flash.
|
|
- **tasmota-knx.bin** = The Knx version without some features but adds KNX support for 1M+ flash.
|
|
- **tasmota-sensors.bin** = The Sensors version adds more useful sensors for 1M+ flash.
|
|
- **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
|
|
- **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support for 1M+ flash.
|
|
- **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
|
|
- **tasmota-zigbee.bin** = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.
|
|
|
|
Above binaries are also available as gzipped version allowing faster uploads.
|
|
|
|
Latest released binaries can be downloaded from
|
|
- https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware
|
|
- http://ota.tasmota.com/tasmota/release
|
|
|
|
Historical binaries can be downloaded from
|
|
- http://ota.tasmota.com/tasmota/release-13.2.0
|
|
|
|
The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz``
|
|
|
|
### ESP32, ESP32-C3, ESP32-S2 and ESP32-S3 based
|
|
The following binary downloads have been compiled with ESP32/Arduino library core version **2.0.14**.
|
|
|
|
- **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. **RECOMMENDED RELEASE BINARY**
|
|
- **tasmota32xy.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 and 4M+ flash.
|
|
- **tasmota32xycdc.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 with serial over embedded USB CDC only and 4M+ flash.
|
|
- **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
|
|
- **tasmota32-AD.bin** to **tasmota32-VN.bin** = The Tasmota version in different languages for 4M+ flash.
|
|
- **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support for 4M+ flash.
|
|
- **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support for 4M+ flash.
|
|
- **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
|
|
- **tasmota32-lvgl.bin** = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
|
|
- **tasmota32-nspanel.bin** = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support.
|
|
- **tasmota32-webcam.bin** = The Webcam version adds webcam support for 4M+ flash.
|
|
- **tasmota32-zbbridgepro.bin** - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support.
|
|
|
|
Latest released binaries can be downloaded from
|
|
- https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware
|
|
- https://ota.tasmota.com/tasmota32/release
|
|
|
|
Historical binaries can be downloaded from
|
|
- https://ota.tasmota.com/tasmota32/release-13.2.0
|
|
|
|
The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin``
|
|
|
|
## Additional information
|
|
|
|
[List](MODULES.md) of embedded modules.
|
|
|
|
[Complete list](BUILDS.md) of available feature and sensors.
|
|
|
|
## Changelog v13.2.0.1
|
|
### Added
|
|
- Command ``GpioRead`` to show input state [#19810](https://github.com/arendst/Tasmota/issues/19810)
|
|
- I2C bus2 support to iAQ core sensor [#19799](https://github.com/arendst/Tasmota/issues/19799)
|
|
- I2C bus2 support to HTU temperature and humidity sensor
|
|
- I2C bus2 support to BH1750 ambient light sensor
|
|
- I2C bus2 support to ADS1115 A/D Converter
|
|
- I2C bus2 support to SHTxX temperature and humidity sensor
|
|
- I2C bus2 support to HYTxxx temperature and humidity sensor
|
|
- I2C bus2 support to SI1145/6/7 Ultra violet index and light sensor
|
|
- I2C bus2 support to LM75AD temperature sensor
|
|
- Support for Winsen XH03x dust particle sensors using USE_PMS5003 and PMS_MODEL_ZH03X [#19850](https://github.com/arendst/Tasmota/issues/19850)
|
|
- Experimental support for ESP32-C2 and ESP32-C6 using Arduino core v3
|
|
- ESP32 core v3 auto TasConsole USB or Serial connection by @staars
|
|
|
|
### Breaking Changed
|
|
|
|
### Changed
|
|
- Matter Light0 now accept a Relay number [#19809](https://github.com/arendst/Tasmota/issues/19809)
|
|
|
|
### Fixed
|
|
- NeoPool filtration mode display [#19801](https://github.com/arendst/Tasmota/issues/19801)
|
|
- ESP32 I2C allow bus2 support when bus1 is not enabled
|
|
|
|
### Removed
|