mirror of https://github.com/arendst/Tasmota.git
171 lines
12 KiB
Markdown
171 lines
12 KiB
Markdown
## Sonoff-Tasmota
|
|
|
|
Alternative firmware for _ESP8266 based devices_ like [iTead](https://www.itead.cc/) _**Sonoff**_ with **web UI, rules and timers, OTA updates, custome device templates and sensors support**. Allows control over **MQTT**, **HTTP**, **Serial** and **KNX** for integrations with smart home systems. Written for Arduino IDE and PlatformIO.
|
|
|
|
[](https://github.com/arendst/Sonoff-Tasmota/releases/latest)
|
|
[](https://github.com/arendst/Sonoff-Tasmota/releases/latest)
|
|
[](https://github.com/arendst/Sonoff-Tasmota/blob/master/LICENSE.txt)
|
|
[](https://discord.gg/Ks2Kzd4)
|
|
|
|
If you like **Sonoff-Tasmota**, give it a star, or fork it and contribute!
|
|
|
|
[](https://github.com/arendst/Sonoff-Tasmota/stargazers)
|
|
[](https://github.com/arendst/Sonoff-Tasmota/network)
|
|
[](https://paypal.me/tasmota)
|
|
|
|
See [RELEASENOTES.md](https://github.com/arendst/Sonoff-Tasmota/blob/master/RELEASENOTES.md) for release information.
|
|
|
|
In addition to the [release webpage](https://github.com/arendst/Sonoff-Tasmota/releases/latest) the binaries can also be OTA downloaded from http://thehackbox.org/tasmota/release/
|
|
|
|
### Disclaimer
|
|
:warning: **DANGER OF ELECTROCUTION** :warning:
|
|
|
|
A Sonoff device is not a toy. It uses Mains AC so there is a danger of electrocution if not installed properly. If you don't know how to install it, please call an electrician. Remember: _**SAFETY FIRST**_. It is not worth to risk yourself, your family and your home if you don't know exactly what you are doing. Never try to flash a Sonoff device while it is connected to MAINS AC.
|
|
|
|
We don't take any responsibility nor liability for using this software nor for the installation or any tips, advice, videos, etc. given by any member of this site or any related site.
|
|
|
|
### Note
|
|
Please do not ask to add devices where you can't provide a basic working configuration (other than sonoff). Since there are thousands of them..
|
|
|
|
### Quick Install
|
|
Download one of the released binaries from https://github.com/arendst/Sonoff-Tasmota/releases and flash it to your hardware as documented in the wiki.
|
|
|
|
### Important User Compilation Information
|
|
If you want to compile Sonoff-Tasmota yourself keep in mind the following:
|
|
|
|
- Only Flash Mode **DOUT** is supported. Do not use Flash Mode DIO / QIO / QOUT as it might seem to brick your device. See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki/Theo's-Tasmota-Tips) for background information.
|
|
- Sonoff-Tasmota uses a 1M linker script WITHOUT spiffs **1M (no SPIFFS)** for optimal code space. If you compile using ESP/Arduino library 2.3.0 then download the provided new linker script to your Arduino IDE or Platformio base folder. Later version of ESP/Arduino library already contain the correct linker script. See [Wiki > Prerequisite](https://github.com/arendst/Sonoff-Tasmota/wiki/Prerequisite).
|
|
- To make compile time changes to Sonoff-Tasmota it can use the ``user_config_override.h`` file. It assures keeping your settings when you download and compile a new version. To use ``user_config.override.h`` you will have to make a copy of the provided ``user_config.override_sample.h`` file and add your setting overrides. To enable the override file you will need to use a compile define as documented in the ``user_config_override_sample.h`` file.
|
|
|
|
### Version Information
|
|
- Sonoff-Tasmota provides all (Sonoff) modules in one file and starts with module Sonoff Basic.
|
|
- Once uploaded select module using the configuration webpage or the commands ```Modules``` and ```Module```.
|
|
- After reboot select config menu again or use commands ```GPIOs``` and ```GPIO``` to change GPIO with desired sensor.
|
|
|
|
### Migration Information
|
|
See [wiki migration path](https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
|
|
|
|
1. Migrate to **Sonoff-Tasmota 3.9.x**
|
|
2. Migrate to **Sonoff-Tasmota 4.x**
|
|
3. Migrate to **Sonoff-Tasmota 5.14**
|
|
4. Migrate to **Sonoff-Tasmota 6.x**
|
|
|
|
### Support Information
|
|
<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoffbasic.jpg" width="250" align="right" />
|
|
|
|
See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki) for more information.<br />
|
|
See [Community](https://groups.google.com/d/forum/sonoffusers) for forum.<br />
|
|
See [Chat](https://discord.gg/Ks2Kzd4) for more user experience.
|
|
|
|
The following devices are supported:
|
|
- [iTead Sonoff Basic (R2)](https://www.itead.cc/smart-home/sonoff-wifi-wireless-switch-1.html)
|
|
- [iTead Sonoff RF](https://www.itead.cc/smart-home/sonoff-rf.html)
|
|
- [iTead Sonoff SV](https://www.itead.cc/smart-home/sonoff-sv.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff_th.jpg" width="250" align="right" />
|
|
- [iTead Sonoff TH10/TH16 with temperature sensor](https://www.itead.cc/smart-home/sonoff-th.html)
|
|
- [iTead Sonoff Dual (R2)](https://www.itead.cc/smart-home/sonoff-dual.html)
|
|
- [iTead Sonoff Pow with Energy Monitoring](https://www.itead.cc/smart-home/sonoff-pow.html)
|
|
- [iTead Sonoff Pow R2 with Energy Monitoring](https://www.itead.cc/sonoff-pow-r2.html)
|
|
- [iTead Sonoff 4CH (R2)](https://www.itead.cc/smart-home/sonoff-4ch.html)
|
|
- [iTead Sonoff 4CH Pro (R2)](https://www.itead.cc/smart-home/sonoff-4ch-pro.html)
|
|
- [iTead Sonoff S20 Smart Socket](https://www.itead.cc/smart-socket.html)
|
|
- [Sonoff S22 Smart Socket](https://github.com/arendst/Sonoff-Tasmota/issues/627)
|
|
- [iTead Sonoff S26 Smart Socket](https://www.itead.cc/sonoff-s26-wifi-smart-plug.html)
|
|
- [iTead Sonoff S31 Smart Socket with Energy Monitoring](https://www.itead.cc/sonoff-s31.html)
|
|
- [iTead Slampher](https://www.itead.cc/slampher.html)
|
|
- [iTead Sonoff Touch](https://www.itead.cc/sonoff-touch.html)
|
|
- [iTead Sonoff T1](https://www.itead.cc/sonoff-t1.html)
|
|
- [iTead Sonoff SC](https://www.itead.cc/sonoff-sc.html)
|
|
- [iTead Sonoff Led](https://www.itead.cc/sonoff-led.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff4chpror2.jpg" height="250" align="right" />
|
|
- [iTead Sonoff BN-SZ01 Ceiling Led](https://www.itead.cc/bn-sz01.html)
|
|
- [iTead Sonoff B1](https://www.itead.cc/sonoff-b1.html)
|
|
- [iTead Sonoff iFan02](https://www.itead.cc/sonoff-ifan02-wifi-smart-ceiling-fan-with-light.html)
|
|
- [iTead Sonoff RF Bridge 433](https://www.itead.cc/sonoff-rf-bridge-433.html)
|
|
- [iTead Sonoff Dev](https://www.itead.cc/sonoff-dev.html)
|
|
- [iTead 1 Channel Switch 5V / 12V](https://www.itead.cc/smart-home/inching-self-locking-wifi-wireless-switch.html)
|
|
- [iTead Motor Clockwise/Anticlockwise](https://www.itead.cc/smart-home/motor-reversing-wifi-wireless-switch.html)
|
|
- [Electrodragon IoT Relay Board](http://www.electrodragon.com/product/wifi-iot-relay-board-based-esp8266/)
|
|
- AI Light or any my9291 compatible RGBW LED bulb
|
|
- H801 PWM LED controller
|
|
- [MagicHome PWM LED controller](https://github.com/arendst/Sonoff-Tasmota/wiki/MagicHome-LED-strip-controller)
|
|
- AriLux AL-LC01, AL-LC06 and AL-LC11 PWM LED controller
|
|
- [Supla device - Espablo-inCan mod. for electrical Installation box](https://forum.supla.org/viewtopic.php?f=33&t=2188)
|
|
- [BlitzWolf BW-SHP2 Smart Socket with Energy Monitoring](https://www.banggood.com/BlitzWolf-BW-SHP2-Smart-WIFI-Socket-EU-Plug-220V-16A-Work-with-Amazon-Alexa-Google-Assistant-p-1292899.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/shelly2_small_250a.png" width="250" align="right" />
|
|
- [Luani HVIO board](https://luani.de/projekte/esp8266-hvio/)
|
|
- [Wemos D1 mini](https://wiki.wemos.cc/products:d1:d1_mini)
|
|
- [HuaFan Smart Socket](https://github.com/arendst/Sonoff-Tasmota/wiki/HuaFan-Smart-Socket)
|
|
- [Hyleton-313 Smart Plug](https://github.com/arendst/Sonoff-Tasmota/wiki/Hyleton-313-Smart-Plug)
|
|
- [Allterco Shelly 1](https://shelly.cloud/shelly1-open-source/)
|
|
- [Allterco Shelly 2 with Energy Monitoring](https://shelly.cloud/shelly2/)
|
|
- NodeMcu and Ledunia
|
|
- [KS-602 based switches like GresaTek, Jesiya, NewRice, Lyasi etc](https://ucexperiment.wordpress.com/2017/11/14/reprogramming-a-lyasi-wifi-wall-switch-with-esp8285/)
|
|
|
|
### Contribute
|
|
You can contribute to Sonoff-Tasmota by
|
|
- providing Pull Requests (Features, Proof of Concepts, Language files or Fixes)
|
|
- testing new released features and report issues
|
|
- donating to acquire hardware for testing and implementing or out of gratitude
|
|
- contributing missing documentation for features and devices on our [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki)
|
|
|
|
[](https://paypal.me/tasmota)
|
|
|
|
### Credits
|
|
|
|
#### Libraries Used
|
|
Libraries used with Sonoff-Tasmota are:
|
|
- [ESP8266 core for Arduino](https://github.com/esp8266/Arduino)
|
|
- [Adafruit CCS811](https://github.com/adafruit/Adafruit_CCS811)
|
|
- [Adafruit ILI9341](https://github.com/adafruit/Adafruit_ILI9341)
|
|
- [Adafruit LED Backpack](https://github.com/adafruit/Adafruit-LED-Backpack-Library)
|
|
- [Adafruit SGP30](https://github.com/adafruit/Adafruit_SGP30)
|
|
- [Adafruit SSD1306](https://github.com/adafruit/Adafruit_SSD1306)
|
|
- [Adafruit GFX](https://github.com/adafruit/Adafruit-GFX-Library)
|
|
- [ArduinoJson](https://arduinojson.org/)
|
|
- [Bosch BME680](https://github.com/BoschSensortec/BME680_driver)
|
|
- [C2 Programmer](http://app.cear.ufpb.br/~lucas.hartmann/tag/efm8bb1/)
|
|
- [esp-epaper-29-ws-20171230-gemu](https://github.com/gemu2015/Sonoff-Tasmota/tree/displays/lib)
|
|
- [esp-knx-ip](https://github.com/envy/esp-knx-ip)
|
|
- FrogmoreScd30
|
|
- [I2Cdevlib](https://github.com/jrowberg/i2cdevlib)
|
|
- [IRremoteEsp8266](https://github.com/markszabo/IRremoteESP8266)
|
|
- [JobaTsl2561](https://github.com/joba-1/Joba_Tsl2561)
|
|
- [LinkedList](https://github.com/ivanseidel/LinkedList)
|
|
- [Liquid Cristal](https://github.com/marcoschwartz/LiquidCrystal_I2C)
|
|
- [MultiChannelGasSensor](http://wiki.seeedstudio.com/Grove-Multichannel_Gas_Sensor/)
|
|
- [NeoPixelBus](https://github.com/Makuna/NeoPixelBus)
|
|
- [NewPing](https://bitbucket.org/teckel12/arduino-new-ping/wiki/Home)
|
|
- [OneWire](https://github.com/PaulStoffregen/OneWire)
|
|
- [PubSubClient](https://github.com/knolleary/pubsubclient)
|
|
- [rc-switch](https://github.com/sui77/rc-switch)
|
|
|
|
#### People inspiring me
|
|
People helping to keep the show on the road:
|
|
- David Lang providing initial issue resolution and code optimizations
|
|
- Heiko Krupp for his IRSend, HTU21, SI70xx and Wemo/Hue emulation drivers
|
|
- Wiktor Schmidt for Travis CI implementation
|
|
- Thom Dietrich for PlatformIO optimizations
|
|
- Marinus van den Broek for his EspEasy groundwork
|
|
- Pete Ba for more user friendly energy monitor calibration
|
|
- Lobradov providing compile optimization tips
|
|
- Flexiti for his initial timer implementation
|
|
- reloxx13 for his [TasmoAdmin](https://github.com/reloxx13/TasmoAdmin) management tool
|
|
- Joachim Banzhaf for his TSL2561 library and driver
|
|
- Gijs Noorlander for his MHZ19, SenseAir and updated PubSubClient drivers
|
|
- Emontnemery for his HomeAssistant Discovery concept and many code tuning tips
|
|
- Aidan Mountford for his HSB support
|
|
- Daniel Ztolnai for his Serial Bridge implementation
|
|
- Gerhard Mutz for his SGP30, Sunrise/Sunset and display support drivers
|
|
- Nuno Ferreira for his HC-SR04 driver
|
|
- Adrian Scillato for his (security)fixes and implementing and maintaining KNX
|
|
- Gennaro Tortone for implementing and maintaining Eastron drivers
|
|
- Raymond Mouthaan for managing Wemos Wiki information
|
|
- Norbert Richter for his decode-config.py tool
|
|
- Andre Thomas for providing [thehackbox](http://thehackbox.org/tasmota/) OTA support and daily development builds
|
|
- Joel Stein and digiblur for their Tuya research and driver
|
|
- Frogmore42 and Jason2866 for providing many issue answers
|
|
- Blakadder for editing the wiki and providing template management
|
|
- Many more providing Tips, Wips, Pocs or PRs
|
|
|
|
### License
|
|
|
|
This program is licensed under GPL-3.0
|