Tasmota/lib/IRremoteESP8266-2.6.5/ReleaseNotes.md

Release Notes

v2.6.5 (20190828)

[Bug Fixes]

• IRMQTTServer: Remove duplicate MQTT_CLIMATE from HA discovery (#869)
• Fujitsu: Ensure on() is called in common a/c framework. (#862)
• Update strToModel() (#861)
• IRMQTTServer: Add missing header file. (#858)
• IRMQTTServer: Fix a compile error when HTML_PASSWORD_ENABLE is enabled. (#856)

[Features]

• IRrecv: Allow tolerance percentage to be set at run-time. (#865)
• Basic support for Daikin152 A/C protocol. (#874)
• Teco: Add light, humid, & save support. (#871)
• Detailed support for Amcor A/C protocol. (#836, #854)
• IRMQTTServer: Add ability to report Vcc at the ESP chip. (#845)
• Gree: Add timer support. (#849)
• IRac/Mitsubishi A/C: Support wide swingh_t mode (#844)
• IRMQTTServer: Generate protocol and bit size html selects (#838)

[Misc]

• New example code to show how to use the IRac class to control A/Cs (#839)
• Improve/fix swingh_t::kWide support (#846)
• Kelvinator: Optimise code a little to save space. (#843)

v2.6.4 (20190726)

[Bug Fixes]

• Fix some swing problems with the Mitsubishi HAVC protocol (#831)
• Fix parameter ordering for Gree in common a/c code. (#815)
• Fix parameters for Coolix in IRac::sendAc() (#829)
• IRMQTTServer: Fix sending >64 bit codes. (#811)

[Features]

• Daikin128: Full detailed support & common a/c support. (#832)
• Midea: Support native temp units of Celsius & SwingV. (#823)
• Gree: Support YBOFB models and bug fix. (#815)
• Pioneer: Fix sendPioneer with Pioneer specific timings (#830)
• Daikin128: Initial support for Daikin 17 Series/BRC52B63 (#828)
• Coolix: Better toCommon() support. (#825)
• Experimental detailed support for Daikin 176 bits (#816)
• Add setting of output options to A/C classes. (#808)
• Add invert flag support to Samsung AC (#807)

[Misc]

• Daikin176: making some change on Daikin176 to work with IRMQTTServer (#826)
• Reduce duplicate code to save (3K+) space. (#813)
• Daikin176: Experiment Daikin176bits with IRMQTTServer (#824)
• Update platformio.ini files for PlatformIO v4.0.0 (#812)
• Change repo URLs to new location. (#806)
• Move htmlEscape() to the IRutils namespace (#801)

v2.6.3 (20190704)

[Bug Fixes]

• IRMQTTServer: REPLAY_DECODED_AC_MESSAGE not working. (#784, #797)
• ESP32: Ensure IRrecv's GPIO is set to input mode. (#774)

[Features]

• IRMQTTServer: Show available sketch space for OTA uploads. (#795)
• Experimental detailed support for Electra/AUX protocol (#788)
• IRMQTTServer: Ability to resend existing climate state via MQTT & HTTP (#784)
• Daikin160: Add detailed & common a/c support. (#777)
• Experimental detailed support for Neoclima protocol. (#767)
• Gree: add WiFi and IFeel bits (#770)
• Handle A/Cs with toggles better. (#758)
• IRMQTTServer: Allow sending/receiving climate via JSON over MQTT. (#763)

[Misc]

• Move converting of IR A/C messages out of example code. (#798)
• Reduce example code size and complexity (#790)
• Change ControlSamsungAC example to not use sendExtended() (#792)
• IRMQTTServer: Add MQTT_CLIMATE_IR_SEND_ON_RESTART compile-time flag. (#784)
• Refactor A/C's toString()'s to reduce code size. Saves ~3.5k (#782)
• Add sanity tests for unexpected conditions in IRrecv. (#773)
• IRMQTTServer: Fixed the HA config documentation (missing '-') (#776)
• Improve mkkeywords tool. (#766)
• Refactor with generic decode routines in IRrecv class. Saves ~7k. (#765)

v2.6.2 (20190616)

[Features]

• Initial support for the ESP32 architecture & boards. (#742)
• Add changable GPIO settings to IRMQTTServer. (#730)
• IRMQTTServer: Enforce a repeat for all Coolix calls (#752)
• Basic DAIKIN 160bit send and decode. (#754)
• Add example code for a Smart(er) IR Repeater. (#740)
• Enforce Samsung A/C Quiet & Powerful mutual exclusivity.

[Misc]

• IRMQTTServer: Add some memory alloc safety checks. (#749)
• Move some ToString() functions to IRac.cpp (#748)
• Increase tolerance value for TCL112AC protocol. (#745)
• Fix compiler warning in IRutils_test.cpp (#756)
• Scrape Supported Protocols and generate SupportedProtocols.md (#755)
• Make supported device info more organised. (#753)

v2.6.1 (20190609)

[Breaking Changes]

• Major rework/breaking changes to Argo A/C support. (#705)

[Bug Fixes]

• Correct set/getQuiet for Samsung A/C (#736)
• Add missing on/off() to IRCoolixAC class. (#725)
• Daikin set/getEye() uses wrong bit. (#711)
• IRMQTTServer: Continue to use same Temperature units. (#710)
• Fixed a bug with setMode()/getMode() for HAIER_AC. (#705)

[Features]

• Add set/getPowerful for Samsung A/C (#736)
• Add calibrate() to all the A/C classes. (#735)
• IRMQTTServer: Add sequencing for sending MQTT IR commands. (#723)
• Add support for Fujitsu AR-REB1E & AR-JW2 remotes. (#718)
• Add Beta decodeTrotec() support. (#719)
• Add experimental decodeArgo() support. (#717)
• Support for Goodweather A/Cs. (#715)
• Add DISABLE_CAPTURE_WHILE_TRANSMITTING feature to IRMQTTServer. (#713)
• Support for Lixil Inax Toilet protocol. (#712)
• Add set/getWeeklyTimerEnable() to Daikin (#711)
• IRMQTTServer: Update Common A/C settings based on received IR messages. (#705)
• Add day of week to DAIKIN protocol (#699)
• Add limited support for Sharp A/C (#696)
• SAMSUNG_AC: Make sure special power mode messages are sent. (#695)
• Add set/getPowerful() (turbo) to DAIKIN216 (#693)

[Misc]

• Add kPeriodOffset for CPU Freq of 160MHz. (#729)
• Example code for a Dumb IR repeater. (#737)
• Update swing handling for Fujitsu A/Cs. (#724)
• Add function to convert decode_results to sendRaw() array. (#721)
• Attempt to reduce heap fragmentation from strings. (#707)
• Update Fujitsu A/C example code to safer settings (#716)
• Enforce better const usage in IRUtils. (#708)
• Attempt to reduce heap fragmentation by A/C toString()s. (#694)
• Minor changes to DAIKIN216 timings and features. (#693)

v2.6.0 (20190430)

[Bug Fixes]

• Fixed problem where LG protocol used wrong duty cycle for repeat. (#687)
• Fix checksum calculation for Daikin protocols. (#678)
• Fix the byte array version of sendGree() (#684, #685)
• Fix artificial vs. real state creation on HaierAC. (#668, #671)
• Fix issues caused by having MQTT_ENABLE set to false. (#677)
• Fix compile problem when DEBUG is defined. (#673, #674)
• Fix Minor bug with MQTT_ENABLE False condition (#654)

[Features]

• Experimental support for DAIKIN216 (ARC433B69) (#690)
• Experimental support for Mitsubishi Heavy Industries A/Cs. (#660, #665, #667)
• Support more features of TCL A/C (#656)
• Add LEGO(TM) Power Functions IR protocol. (#655)
• Add Panasonic AC RKR model & Example (#649)
• DAIKIN/IRDaikinESP overhaul and add Comfort mode support. (#678) WARNING: Previous sendDaikin() calls may not work. Please recapture codes or use kDaikinStateLengthShort for nbytes in those calls.
• IRMQTTServer: Move MQTT server and other parameters to WifiManager. (#680) WARNING: Previous users may need to fully wipe/reset the SPIFFS/WifiManager settings by visiting http://<your_esp8266's_ip_address>/reset prior to or after update.
• Add Wifi filtering options to IRMQTTServer. (#679)
• Add advanced aircon/climate functionality to IRMQTTServer (#677)
• Initial prototype of a common interface for all A/Cs. (#664)
• Improve MQTT topic usage for feedback messages. (#663)
• Add multiple independent GPIO sending support via MQTT. (#661)

[Misc]

• Adjust kGreeHdrSpace to 4500 (#684, #686)
• Add Home Assistant mqtt climate instructions. (#682)
• Implement htmlEscape() to prevent XSS etc. (#681)
• Add F() Macros (#670)
• Update Daikin2's Cool mode min temp to 18C (#658)
• Change per byte bit-order in Electra protocol. (#648)
• Improve Daikin2 power on/off. (#647)

v2.5.6 (20190316)

[Bug Fixes]

• Fix Coolix A/C Class to handle special states better. (#633, #624)

[Features]

• Fix case style for recent A/C protocols. (#631)
• Update IRsend::send() to include all simple protocols. (#629, #628)
• Experimental basic support for 112 bit TCL AC messages (#627, #619)
• Add support for TECO AC (#622)
• Experimental support for Samsung 36 bit protocol (#625, #621)

[Misc]

• Set Coolix to default to 1 repeat. (#637, #636, #624, #439)
• Set Daikin2 modulation to 36.7kHz. (#635)
• Refactor IRVestelAC class to use portable code. (#617)
• Adjust Daikin2 timings and tolerance. (#616, #582)

v2.5.5 (20190207)

[Bug Fixes]

• Fix decoding of Samsung A/C Extended messages. (#610)
• Fix IRMQTTServer example to work with GPIO0 as IR_RX (#608)
• Fix incorrect #define usage. (#597, #596)

[Features]

• Add deep decoding/construction of Daikin2 messages (#600)
• Added Old Vestel A/C support (56 Bits) with full functions. (#607)

[Misc]

• Add ControlSamsungAC example code. (#599)
• Add how to send a state/air-con to IRsendDemo.ino (#594)

v2.5.4 (20190102)

[Features]

• Experimental basic support for 39 Byte Daikin A/C (#583)
• Handle send() repeats in A/C classes. Improve Coolix support. (#580)
• Add optional RX pin pullup and dump raw messages in IRMQTTServer.ino (#589)

[Misc]

• Make auto_analyse_raw_data.py work with Python3 (#581)
• Update CI/travis config due to esp8266 core 2.5.0 changes (#591)

v2.5.3 (20181123)

[Features]

• Add deep support for the Hitachi 28-Byte A/C Protocol (#563)
• Deep decoding for Whirlpool A/C (#572)
• Improve security options for IRMQTTServer example. (#575)
• Require a changed firmware password before upload. (#576)

[Misc]

• Add missing '}' in output of Auto analyse. (#562)
• Make A/C example code a bit more simple. (#571)

v2.5.2 (20181021)

[Bug Fixes]

• Add missing send() method to IRPanasonicAC class. (#545)
• Add missing sendWhirlpoolAC() to IRMQTTServer.ino (#558)

[Features]

• Add IR receiving support to IRMQTTServer. (#543)
• Pioneer support (#547)
• Add support for a second LG protocol variant. (#552)
• Support for short Panasonic A/C messages. (#553)
• Add support for Panasonic CKP series A/Cs. (#554)
• Experimental timer/clock support for Panasonic A/Cs. (#546)
• Add Made With Magic (MWM) support (#557)

[Misc]

• Grammar and typo fixes (#541, #549)
• Increase Panasonic A/C message tolerances. (#542)
• Added command mode2_decode in tools/ (#557)
• General code style cleanup (#560)

v2.5.1 (20181002)

[Bug Fixes]

• Correct the byte used for Samsung AC Swing. (#529)
• Fix not sending Samsung A/C messages in IRMQTTServer. (#529)

[Features]

• Experimental support for Electra A/C messages. (#528)
• Experimental support for Panasonic A/C messages. (#535)
• Samsung A/C fixes & improvements (#529)
• IRMQTTServer v0.6.0 (#530)

[Misc]

• Change required WifiManager lib version to v0.14
• Add alias for RAWTICK to kRawTick. (#535)
• Update sendLutron() status. (#515)
• Remove leftover debug message in IRrecvDumpV2 (#526)

v2.5.0 (20180919)

[Bug Fixes]

• Fix HTML menu error for GICABLE in IRMQTTServer. (#516)
• Fix Mitsubishi A/C mode setting. (#514)
• Add missing ',' in auto analyse tool generated code. (#513)
• Fix Fujitsu checksum validation. (#501)
• Remove errant Repeat debug statement in IRMQTTServer. (#507)

[Features]

• Mitsubishi A/C decode improvements. (#514)
• Basic support for Whirlpool A/C messages. (#511)
• Basic support for Samsung A/C messages. (#512)
• Experimental support for detailed Samsung A/C messages. (#521)
• Experimental support for detailed Coolix A/C messages. (#518)
• Experimental support for Lutron protocol. (#516)
• Calculate and use average values for timings in analysing tool. (#513)

[Misc]

• Style change from using #define's for constants to const kConstantName.
• Improve the JVC example code.

v2.4.3 (20180727)

[Bug Fixes]

• Handle Space Gaps better in auto analyse tool. (#482)
• Correct min repeat for GICABLE in IRMQTTServer. (#494)

[Features]

• Add static IP config option to IRMQTTServer (#480)
• Full decoding/encoding support for the Haier YRW02 A/C. (#485 #486 #487)

[Misc]

• Update LG (28-bit) HDR mark and space timings. (#492)
• Spelling and grammar fixes (#491)

v2.4.2 (20180601)

[Bug Fixes]

• Timing Fix: Update the period offset compensation.

[Features]

• Improvements for IRMQTTServer example (#466)

v2.4.1 (20180520)

[Bug Fixes]

• Fix crash in IRMQTTServer when compiled under Arduino IDE. (#455)
• Default bit length not set for RCMM in IRMQTTServer example. (#456)
• Bad acknowledgements for some A/C protocols in IRMQTTServer example. (#460)

[Features]

• Allow disabling the use of delay() calls. (#450)
• Initial support for G.I. Cable protocol. (#458)
• Support of Hitachi A/C 13 & 53 byte messages. (#461)

[Misc]

• Auto Analyse Raw Data script converted to Python. (#454)

v2.4.0 (20180407)

[Bug Fixes]

• Add missing WiFi.begin() call to IRGCTCPServer example. (#433)
• Add missing sendHaierAC() to IRMQTTServer example. (#434 & #444)
• Make mqtt clientid unique in IRMQTTServer example. (#444)

[Features]

• Initial Mitsubishi projector protocol support. (#442)
• Experimental support of Hitachi A/C messages. (#445)
• Improve transmission pulse modulation support. Allow disabling of transmission frequency modulation.(#439)

[Misc]

• IRMQTTServer example improvements. (#444)

v2.3.3 (20180302)

[Bug Fixes]

• Ensure the IR LED is off before we start. (#405)

[Features]

• Experimental decode support for Gree HVAC units (#397)
• Initial support for Haier A/Cs. (#409)
• Improve timing accuracy of unit tests. (#403)
• Rework matchData() to handle equal total data bit time protocols. (#408)

[Misc]

• Add startup text to IRrecvDumpV2 and IRrecvDemo (#412)
• Tweak timings on Fujitsu A/C header (#418)
• AutoAnalyseRawData.sh: Add some support for handling larger than 64 bit codes. (#419)
• Use better comments for send GPIO in examples. (#425)

v2.3.2 (20180126)

[Bug Fixes]

• Integer underflow caused device not to respond in sendJVC() (#401)

[Features]

• Initial support for sending & receiving Carrier HVAC codes. (#387)
• Add Pronto HEX code support to gc_decode tool. (#388)

[Misc]

• Make mDNS independent of MQTT in IRMQTTServer example code. (#390 #391)

v2.3.1 (20171229)

[Bug Fixes]

• Setting #define SEND_FUJITSU_AC false caused a compilation error (#375)
• Integer underflow caused huge space() in sendGeneric() (#381)

[Features]

• Support sending & receiving Lasertag codes. (#374)
• Reduce the library footprint by using a new sendGeneric() routine. (#373)

[Misc]

• Lots of grammar & typo fixes. (#378)
• Update keywords.txt for Arduino IDE users (#371)
• Update pins in examples so they are compatible with Adafruit boards. (#383)

v2.3.0 (20171208)

[Bug Fixes]

• Panasonic-based protocols had incorrect message gap. (#358)
• Formatting error for large rawData values in example code. (#355)
• Off-by-one error in payload_copy malloc. (#337)
• Off-by-one error in unit test helper routines (#363)

[Features]

• Support sending and receiving Midea A/C codes.
• Support for receiving Kelvinator A/C codes. (#332)
• Support more operation features for Daikin A/Cs.
• Support for decoding Daikin A/Cs.
• Support sending and receiving Toshiba A/Cs. (#333)
• Support sending and receiving AR-DB1 Fujitsu A/C codes. (#367)
• Add new AutoAnalyseRawData.sh & RawToGlobalCache.sh tools (#345) (#343)
• Support for MagiQuest wands. (#365)

[Misc]

• Add checksum verification to Kelvinator A/C decodes. (#348)
• Changes to the threshold reporting of UNKNOWN messages (#347)
• Major re-work of Daikin A/C support.
• Sending for all A/Cs added to MQTT example code.
• MQTT example code improvements. (#334)
• IRrecvDumpV2 significant output improvements. (#363)
• Improved unit test coverage for the library.

v2.2.1 (20171025)

[Features]

• Support for sending and decoding Nikai TV messages. (#311, #313)
• gc_decode: External utility to decode Global Cache codes. (#308, #312)
• IRMQTTServer: Example code to send IR messages via HTTP & MQTT. (#316, #323)
• Improve converting 64bit values to hexadecimal. (#318)

[Misc]

• IRrecvDump.ino code is now deprecated. Use IRrecvDumpV2.ino instead. (#314)

v2.2.0 (20170922)

[Bug Fixes]

• Add printing output of RC-MM and RC-5X protocols in example code. (#284)
• LG timing improvements based on observations (#291)

[Features]

• Automatic capture timing calibration for some protocols. (#268)
• Support for creating & sending Trotec AC codes. (#279)
• Support for creating & sending Argo Ulisse 13 DCI codes. (#280 #300)
• Move to 2 microsecond timing resolution for capture of codes. (#287)
• Capture buffer changes:
• Size at runtime. (#276)
• Message timeout at runtime. (#294)
• Simplify creating & using a second buffer (#303)
• New example code:
  • Trotec A/C (#279)
  • LG A/C units (#289)
  • Argo Ulisse 13 DCI codes. (#300)

v2.1.1 (20170711)

[Bug Fixes]

• GlobalCache incorrectly using hardware offset for period calc. (#267)

[Features]

• Support reporting of 'NEC'-like 32-bit protocols. e.g. Apple TV remote (#265)
• Add an example of sendRaw() to IRsendDemo.ino (#270)

v2.1.0 (20170704)

[Features]

• Support for sending Pronto IR codes. (#248)
• Support for sending Fujitsu A/C codes. (#88)
• Minor improvements to examples.

v2.0.3 (20170618)

[Bug fixes]

• Capture buffer could become corrupt after large message, breaking subsequent decodes. (#253)

v2.0.2 (20170615)

[Bug fixes]

• Correct decode issue introduced in v2.0.1 affecting multiple protocol decoders (#243)
• Correct post-message gap for the Panasonic protocol(s) (#245)
• Incorrect display of the decoded uint64_t value in the example code. (#245)

v2.0.1 (20170614)

[Bug fixes]

• Decoding protocols when it doesn't detect a post-command gap, and there is no more data. (#243)
• Incorrect minimum size calculation when there is no post-command gap. (#243)

v2.0.0 - 64 bit support and major improvements (20170612)

[Misc]

• This is almost a complete re-write of the library.

[Features]

• All suitable protocols now handle 64-bit data messages and are repeatable via an optional argument.
• Unit tests for all protocols.
• Far better and stricter decoding for most protocols.
• Address & command decoding for protocols where that information is available.
• Much more precise timing for generation of signals sent.
• Lower duty-cycles for some protocols.
• Several new protocols added, and some new sending and decoding routines for existing ones.
• Ability to optionally chose which protocols are included, enabling faster decoding and smaller code footprints if desired.
• Support for far larger capture buffers. (e.g. RAWLEN > 256)

[Bug fixes]

• Numerous bug fixes.

v1.2.0 (20170429)

[Features]

• Add ability to copy IR capture buffer, and continue capturing. Means faster and better IR command decoding.
• Reduce IRAM usage by 28 bytes.
• Improve capture of RC-MM & Panasonic protocols.
• Upgrade IRrecvDumpV2 to new IR capture buffer. Much fewer corrupted/truncated IR messages.

v1.1.1 (20170413)

[Bug fixes]

• Fix a reported problem when sending the LG protocol. Preemptive fix for possible similar cases.
• Fix minor issues in examples.

[Features]

• Add documentation to some examples to aid new people.
• Add ALPHA support for RC-MM protocol. (Known to be currently not 100% working.)