mirror of https://github.com/arendst/Tasmota.git
UK V1 Flashing Contacts
parent
0bd655cfeb
commit
18525fa875
|
@ -25,6 +25,7 @@ The front circuit board should be disconnected from the rear relay board to prev
|
||||||
The following board layouts are from the 3 variants of the Sonoff T1 UK variant and are marked Sonoff T1 R2 UK Touch Board, Ver 1.0.
|
The following board layouts are from the 3 variants of the Sonoff T1 UK variant and are marked Sonoff T1 R2 UK Touch Board, Ver 1.0.
|
||||||
|
|
||||||
![img_20180113_094236](https://user-images.githubusercontent.com/10469147/34905168-6128981a-f84b-11e7-9cf0-e0e4c3b0bd55.jpg)
|
![img_20180113_094236](https://user-images.githubusercontent.com/10469147/34905168-6128981a-f84b-11e7-9cf0-e0e4c3b0bd55.jpg)
|
||||||
|
![UKv1_flashingContacts](https://user-images.githubusercontent.com/34340210/63719105-3414e400-c81a-11e9-9b4c-98600e5ad365.jpg)
|
||||||
|
|
||||||
1. Entering Flashing mode varies between the 1, 2 and 3 channel versions. See the above picture for button nomenclature used. (The variations between the 3 versions appear to be managed by the touch IC rather than in the ESP).
|
1. Entering Flashing mode varies between the 1, 2 and 3 channel versions. See the above picture for button nomenclature used. (The variations between the 3 versions appear to be managed by the touch IC rather than in the ESP).
|
||||||
To enter flashing mode the unit should be powered and connected to the programmer of choice. Touch Button 1 should then be held while the reset button (4) is pressed. When the device reboots, Button 1 can be released.
|
To enter flashing mode the unit should be powered and connected to the programmer of choice. Touch Button 1 should then be held while the reset button (4) is pressed. When the device reboots, Button 1 can be released.
|
||||||
|
|
Loading…
Reference in New Issue