mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

cross-over serial interface for v2.0

pascalsaul 2017-08-27 08:11:13 +02:00
parent 9109820066
commit 4034e314ca
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Sonoff-Dual.md

@ -7,7 +7,7 @@
Please see the [Hardware Preparation](https://github.com/arendst/Sonoff-Tasmota/wiki/Hardware-Preparation) page for general instructions. Please see the [Hardware Preparation](https://github.com/arendst/Sonoff-Tasmota/wiki/Hardware-Preparation) page for general instructions.
As always, you need to access the serial interface. The **four serial pins** (3V3, Rx, Tx, GND) are available at the short end of the PCB and can be seen on the left side of the first image and are labeled in red on the second image. As always, you need to access the serial interface. The **four serial pins** (3V3, Rx, Tx, GND) are available at the short end of the PCB and can be seen on the left side of the first image and are labeled in red on the second image. For the v2.0 version of the board you need to cross-over the serial interface, see [troubleshooting](https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting).
<img alt="Sonoff Dual, GPIO0 grounded" src="https://github.com/arendst/arendst.github.io/blob/master/media/dual2a.jpg" width="48%" /> <img alt="Sonoff Dual, GPIO0 grounded" src="https://github.com/arendst/arendst.github.io/blob/master/media/dual2a.jpg" width="48%" />
<img alt="Alternate GPIO0 spot" src="http://tinkerman.cat/wp-content/uploads/2016/12/20161206_234331s.jpg" width="48%" align="right" /> <img alt="Alternate GPIO0 spot" src="http://tinkerman.cat/wp-content/uploads/2016/12/20161206_234331s.jpg" width="48%" align="right" />