mirror of https://github.com/arendst/Tasmota.git
Updated Expanding Sonoffs (markdown)
parent
c5d7166552
commit
6db80a8e2c
|
@ -38,16 +38,17 @@ If a pin is defined as GPIO_USER in the module template, you can assign it one o
|
||||||
```
|
```
|
||||||
|
|
||||||
# Examples
|
# Examples
|
||||||
|
## Connect swotch
|
||||||
1. If you take a Sonoff Basic and connect a switch between pin4 (ground) and pin5 (GPIO4) of the 5 pin programming header you now have a second switch connected to the device. You can set this through the module config page as option ``09 Switch1`` or from the command line with ``gpio4 9``.
|
If you take a Sonoff Basic and connect a switch between pin4 (ground) and pin5 (GPIO4) of the 5 pin programming header you now have a second switch connected to the device. You can set this through the module config page as option ``09 Switch1`` or from the command line with ``gpio4 9``.
|
||||||
|
|
||||||
If you have fewer than two relays on the module, the additional switch(es) will not show up any different than the built-in switch and will control the single relay unless you set switchtopic to something other than 0 (either 1 or a custom topic). Once this is done the built-in switch will produce ``stat/<topic>/POWER1`` while the new switch will produce ``cmnd/<switchtopic>/POWER1``
|
If you have fewer than two relays on the module, the additional switch(es) will not show up any different than the built-in switch and will control the single relay unless you set switchtopic to something other than 0 (either 1 or a custom topic). Once this is done the built-in switch will produce ``stat/<topic>/POWER1`` while the new switch will produce ``cmnd/<switchtopic>/POWER1``
|
||||||
|
|
||||||
With more relays on the modules, the additional switch will create additional POWER\<n> events without the need to set switchtopic.
|
With more relays on the modules, the additional switch will create additional POWER\<n> events without the need to set switchtopic.
|
||||||
|
|
||||||
you can set the mode of each switch individually with ``switchmode1`` or ``switchmode2``
|
You can set the mode of each switch individually with ``switchmode1`` or ``switchmode2``
|
||||||
|
|
||||||
2. Instead of connecting a switch, you could connect a 4-pin 2.5mm jack, with the pins wired:
|
## Connect header
|
||||||
|
Instead of connecting a switch, you could connect a 4-pin 2.5mm jack, with the pins wired:
|
||||||
* tip pin5 (GPIO4)
|
* tip pin5 (GPIO4)
|
||||||
* r1 no connection
|
* r1 no connection
|
||||||
* r2 pin1 (3.3v)
|
* r2 pin1 (3.3v)
|
||||||
|
|
Loading…
Reference in New Issue