Updated Expanding Sonoffs (markdown)

Theo Arends 2017-03-15 12:35:46 +01:00
parent 0d1af51fbe
commit c5d7166552
1 changed files with 1 additions and 1 deletions

@ -39,7 +39,7 @@ If a pin is defined as GPIO_USER in the module template, you can assign it one o
# Examples
1. If you take a Sonoff Basic and connect a switch between pin4 (ground) and pin5 (GPIO4) of the 5 pin programming header you now have a second switch connected to the device. You can set this through the module config page as option ``09 Switch1`` or from the command line with ``gpio4 9``
1. If you take a Sonoff Basic and connect a switch between pin4 (ground) and pin5 (GPIO4) of the 5 pin programming header you now have a second switch connected to the device. You can set this through the module config page as option ``09 Switch1`` or from the command line with ``gpio4 9``.
If you have fewer than two relays on the module, the additional switch(es) will not show up any different than the built-in switch and will control the single relay unless you set switchtopic to something other than 0 (either 1 or a custom topic). Once this is done the built-in switch will produce ``stat/<topic>/POWER1`` while the new switch will produce ``cmnd/<switchtopic>/POWER1``