mirror of https://github.com/arendst/Tasmota.git
Updated Sonoff DIY (markdown)
parent
0193f133b7
commit
7d582e6e61
|
@ -30,7 +30,7 @@ As Sonoff DIY is enabled by connecting GPIO16 to GND it may well be possible tha
|
||||||
- Select `Firmware flash` (`Brush machine` on newer versions of the tool)
|
- Select `Firmware flash` (`Brush machine` on newer versions of the tool)
|
||||||
- Select a Tasmota binary (e.g., [`sonoff-basic.bin`](http://thehackbox.org/tasmota/020300/sonoff-basic.bin)) or your own self-compiled binary. It must fit in the available free program space. You can use the 2.3.0 Core for this initial flash since it has the smallest program memory footprint. _**Do NOT use the sonoff-minimal pre-compiled binary**_ as it does not allow you to change any settings.
|
- Select a Tasmota binary (e.g., [`sonoff-basic.bin`](http://thehackbox.org/tasmota/020300/sonoff-basic.bin)) or your own self-compiled binary. It must fit in the available free program space. You can use the 2.3.0 Core for this initial flash since it has the smallest program memory footprint. _**Do NOT use the sonoff-minimal pre-compiled binary**_ as it does not allow you to change any settings.
|
||||||
|
|
||||||
>You may wish to [compile your own firmware](https://github.com/arendst/Sonoff-Tasmota/wiki/Compiling-Tasmota-on-Gitpod) with all the features you require and disabling the features you do not. This will usually result in a "full" binary that is under 500k. You can use the resulting firmware file instead of the pre-compiled `sonoff-basic.bin`. This way you will not have to perform the secondary OTA firmware update. _**Nevertheless, it is still recommended that you perform a `Reset 5` immediately after the Sonoff DIY flash completes.**_
|
> You may wish to [compile your own firmware](https://github.com/arendst/Sonoff-Tasmota/wiki/Compiling-Tasmota-on-Gitpod) with all the features you require and disabling the features you do not. This will usually result in a "full" binary that is under 500k. You can use the resulting firmware file instead of the pre-compiled `sonoff-basic.bin`.
|
||||||
- Select the device in the flash pop-up and then select OK
|
- Select the device in the flash pop-up and then select OK
|
||||||
- Tasmota will be uploaded and started
|
- Tasmota will be uploaded and started
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue