mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Mirabella Genio Smart Plug (markdown)

afalzon 2019-01-13 08:12:03 +11:00
parent 5becf406ac
commit 9b6daa68d3
1 changed files with 6 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Mirabella-Genio-Smart-Plug.md

@ -1,4 +1,4 @@
Mirabella have released a few items under the range "Genio" there were a few posts referring to these being based on the "Tuya" products.
# Mirabella Genio Smart Plug
This is a simple smart plug with the addition of a USB port, as far as I can see the USB port is 'always on' and is not access this from the ESP module.
Opening up the device was easy, 2 screws then a small amount of gentle prying exposed the components, 2 more screws had it fully deconstructed.
@ -7,14 +7,12 @@ The ESP module is mounted on a pcb with all of the required pins exposed, a quic
![ESP8266 PINOUT](https://i.ibb.co/YRQstXr/ESP-PIN-OUT.png)
I was able to flash by connecting GPIO0 to GND while connecting my Serial Adaptor and plashing as per any other ESP device
Use this from the console of the device to configure all your own settings,
Use this from the console of the device to configure all your own settings:
`Backlog SSID1 YOUR_SSID_NAME; Password1 YOUR_WIFI_PASSWORD; MqttHost MQTT_INTERNAL_IP_ADDRESS; MqttUser MQTT_USER_NAME; MqttPassword MQTT_PASSWORD; GPIO2 56; GPIO12 21; GPIO13 17;topic genio1; FriendlyName Genio1`
[my prefered flashing method](https://www.youtube.com/watch?v=UDnNI5wkNNY)
Once flashed, the config should look like: ![config settings](https://i.ibb.co/khNDTvV/settings.png)
Once flashed, the config should look like:
![config settings](https://i.ibb.co/khNDTvV/settings.png)
hope this helps anyone looking at these products!