Updated Mirabella Genio Smart Plug (markdown)

afalzon 2019-01-13 07:58:54 +11:00
parent 3d62254aa4
commit a6c9206f0e
1 changed files with 10 additions and 4 deletions

@ -1,14 +1,20 @@
Mirabella have released a few items under the range "Genio" there were a few posts referring to these being based on the "Tuya" products. Mirabella have released a few items under the range "Genio" there were a few posts referring to these being based on the "Tuya" products.
This is a simple smart plug with the addition of a USB port, as far as I can see the USB port is 'always on' and is not access this from the ESP module. This is a simple smart plug with the addition of a USB port, as far as I can see the USB port is 'always on' and is not access this from the ESP module.
Opening up the device was easy, 2 screws then a small amount of gentle prying exposed the components, 3 more screws had it fully deconstructed. Opening up the device was easy, 2 screws then a small amount of gentle prying exposed the components, 2 more screws had it fully deconstructed.
The ESP module is mounted on a pcb with all of the required pins exposed, a quick google image search gave me this information: The ESP module is mounted on a pcb with all of the required pins exposed, a quick google image search gave me this information:
![ESP8266 PINOUT](https://i.ibb.co/YRQstXr/ESP-PIN-OUT.png) ![ESP8266 PINOUT](https://i.ibb.co/YRQstXr/ESP-PIN-OUT.png)
I was able to flash using my [prefered flashing method](https://www.youtube.com/watch?v=UDnNI5wkNNY) I was able to flash by connecting GPIO0 to GND while connecting my Serial Adaptor and plashing as per any other ESP device
Once flashed, the config is just like the [Tuya plug](https://github.com/arendst/Sonoff-Tasmota/wiki/Tuya-Smart-Plug-Models-ESP8266MOD-by-AI-THINKER-and-ESP-12F-by-TUYA-LN-0026) Use this from the console of the device to configure all your own settings,
`Backlog SSID1 YOUR_SSID_NAME; Password1 YOUR_WIFI_PASSWORD; MqttHost MQTT_INTERNAL_IP_ADDRESS; MqttUser MQTT_USER_NAME; MqttPassword MQTT_PASSWORD; GPIO2 56; GPIO12 21; GPIO13 17;topic genio1; FriendlyName Genio1`
[my prefered flashing method](https://www.youtube.com/watch?v=UDnNI5wkNNY)
Once flashed, the config should look like: [config settings](https://i.ibb.co/khNDTvV/settings.png)
![config settings](https://i.ibb.co/khNDTvV/settings.png)
hope this helps anyone looking at these products! hope this helps anyone looking at these products!