mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Choose sonoff-basic for initial flash

Michael Ingraham 2019-07-24 09:14:58 -04:00
parent f565350b05
commit e73f5134ca
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Sonoff-DIY.md

@ -26,11 +26,11 @@ The following procedure upgrades Sonoff eWelink software to Tasmota using a Wind
- The utility should discover the Sonoff DIY device
- Select the device and toggle it ON and OFF to verify you are connected to the right device
- Select Firmware flash
- Select a [pre-compiled Tasmota binary](http://thehackbox.org/tasmota) or your own self-compiled binary. It must be _smaller than 500k_. _**Do NOT use the sonoff-minimal pre-compiled binary**_ as it does not allow to change any setting.
- Select a pre-compiled Tasmota binary (e.g., [`sonoff-basic.bin`](http://thehackbox.org/tasmota/020300/sonoff-basic.bin)) or your own self-compiled binary. It must be _smaller than 500k_. _**Do NOT use the sonoff-minimal pre-compiled binary**_ as it does not allow you to change any settings.
- Select the device in the flash pop-up and then select OK
- Tasmota will be uploaded and started
Once the firmware upload completes and the device restarts, continue the setup process as if you just installed Tasmota on the device.
Once the firmware upload completes and the device restarts, it is recommend that you load the firmware variant needed for your device and use case (e.g., `sonoff.bin`). Once the desired firmware is on the device, continue the regular Tasmota setup process.
### Clean up
- Quit DIY mode tool