mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Rules (markdown)

Michael Ingraham 2019-02-11 10:37:08 -05:00
parent ec3dd58d94
commit f5244683c6
1 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Rules.md

@ -187,13 +187,13 @@ VARx#State | when a the value for a Variable is changed
MEMx#State | when a the value for a Persistent Variable is changed | 6.4.1.14
#### Sensors
All connected sensors can be a trigger in the form as they are represented in the teleperiod or Status 8 JSON message. The format is:
All connected sensors can be a trigger in the form as they are represented in the TelePeriod or Status 8 JSON message. The format is:
```
[SensorName]#[ValueName]
```
Example triggers are:
- ``Tele-AM2301#Temperature``triggers on the Teleperiod time for the sensor AM2301.
- ``Tele-AM2301#Temperature``triggers on the TelePeriod time for the sensor AM2301.
- ``Dsb18b20#Temperature<20`` whenever the temperature of sensor DSB18B20 is below 20 degrees
- ``AM2301-12#Humidity=55.5`` whenever the hunidity of sensor AM2301-12 equals 55.5 %
- ``INA219#Current>0.100`` whenever the current drawn is more than 0.1A
@ -204,7 +204,7 @@ Devices using RfReceived (Sonoff Bridge) or IrReceived are also supported based
- ``IrReceived#Data=801`` whenever an IR signal for a RC5 remote control button 1 is received (6.1.0)
- ``RfReceived#RfKey=4`` whenever the Sonoff Bridge receives a recognized Rf signal (6.1.0)
To trigger on a sensor at Teleperiod time only you may prefix the sensor with the word ``tele-`` to distinguish it from the above shown trigger. See example 5 below.
To trigger on a sensor at TelePeriod time only you may prefix the sensor with the word ``tele-`` to distinguish it from the above shown trigger. See example 5 below.
[BackToTop](https://github.com/arendst/Sonoff-Tasmota/wiki/Rules#summary)
@ -606,7 +606,7 @@ Inital config on console:
* `SwitchMode1 3` <- Use the switch1 as pushbutton (It will allow us to disable the link between the button and the relay by inserting a rule to dictate what the pushbutton will do - **NOTE: Until rules are created the pushbutton will still control the relay!**)
* `Rule 1 ` <- turn on rules
* `Rule 4` <- turn off one-shot rule
* `teleperiod 60` <- check temp every minute
* `TelePeriod 60` <- check temp every minute
* `SetOption26 1` <- use power1 on mqtt messages
* `SetOption0 0` <- dont save relay status on eeprom
* `poweronstate 0` <- start all relays off
@ -658,9 +658,9 @@ To get the status:
Everything together:
INITIAL CONFIG: (To note RuleTimer1 must be greater that teleperiod for expected results)
INITIAL CONFIG: (To note RuleTimer1 must be greater that TelePeriod for expected results)
`backlog SwitchMode1 3; Rule 1; Rule 4; teleperiod 60; SetOption26 1; SetOption0 0; poweronstate 0; mem1 0; mem2 25; mem3 23; var1 0`
`backlog SwitchMode1 3; Rule 1; Rule 4; TelePeriod 60; SetOption26 1; SetOption0 0; poweronstate 0; mem1 0; mem2 25; mem3 23; var1 0`
RULES: