mirrors
/
micropython
mirror of https://github.com/micropython/micropython.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
micropython/ports/stm32/boards/ESPRUINO_PICO/mpconfigboard.mk

10 lines
270 B
Makefile
Raw Normal View History

stmhal: Update Makefile and board configs to compile with relocated hal.
2015-07-19 12:17:42 +01:00
MCU_SERIES = f4
stmhal: Generate modstm constants per build This causes unnecessary constants to no longer be generated. Some constants (like UART_BRR) are different between the F4 and F7
2015-08-02 18:42:09 +01:00
CMSIS_MCU = STM32F401xE
stmhal: Add support for Espruino Pico board. To build: make BOARD=ESPRUINO_PICO To deploy: short the BOOT0/BTN contact on the back of the board (eg by drawing over it with a graphite pencil), then hold down BTN while inserting the board into the USB port. The board should then enter DFU mode, and the firmware can be downloaded using: make BOARD=ESPRUINO_PICO deploy
2015-04-18 21:27:10 +01:00
AF_FILE = boards/stm32f401_af.csv
stm32/boards: Allow boards to have finer control over the linker script. This patch allows a particular board to independently specify the linker scripts for 1) the MCU memory layout; 2) how the different firmware sections are arranged in memory. Right now all boards follow the same layout with two separate firmware section, one for the ISR and one for the text and data. This leaves room for storage (filesystem data) to live between the firmware sections. The idea with this patch is to accommodate boards that don't have internal flash storage and only need to have one continuous firmware section. Thus the common.ld script is renamed to common_ifs.ld to make explicit that it is used for cases where the board has internal flash storage.
2018-03-27 11:17:48 +01:00
LD_FILES = boards/stm32f401xd.ld boards/common_ifs.ld
stm32/Makefile: Allow a board to config either 1 or 2 firmware sections. This patch forces a board to explicitly define TEXT1_ADDR in order to split the firmware into two separate pieces. Otherwise the default is now to produce only a single continuous firmware image with all ISR, text and data together.
2018-03-27 11:24:15 +01:00
TEXT0_ADDR = 0x08000000
TEXT1_ADDR = 0x08020000
stmhal: Reduce size of ESPRUINO_PICO build so it fits in flash. The default frozen modules are no longer included (but users can still specify their own via FROZEN_MPY_DIR), complex numbers are disabled and so are the native, viper and asm_thumb emitters. Users needing these features can tune the build to disable other things.
2017-07-12 03:51:37 +01:00
# Don't include default frozen modules because MCU is tight on flash space
FROZEN_MPY_DIR ?=