Commit Graph

1271 Commits

Author SHA1 Message Date
Damien George ff0306dfa5 stm32/usb: Remove mp_hal_set_interrupt_char now that it's reset at boot. 2019-05-01 13:08:05 +10:00
Krono fbd4e61e57 esp32/machine_wdt: Add timeout arg to select interval, make WDT panic.
The machine.WDT() now accepts the "timeout" keyword argument to select the
WDT interval.  And the WDT is changed to panic mode which means it will
reset the device if the interval expires (instead of just printing an error
message).
2019-04-30 16:53:05 +10:00
Damien George 8031b7a25c stm32/powerctrl: Deselect PLLSAI as 48MHz src before turning off PLLSAI.
On the STM32F722 (at least, but STM32F767 is not affected) the CK48MSEL bit
must be deselected before PLLSAION is turned off, or else the 48MHz
peripherals (RNG, SDMMC, USB) may get stuck without a clock source.

In such "lock up" cases it seems that these peripherals are still being
clocked from the PLLSAI even though the CK48MSEL bit is turned off.  A hard
reset does not get them out of this stuck state.  Enabling the PLLSAI and
then disabling it does get them out.  A test case to see this is:

    import machine, pyb
    for i in range(100):
        machine.freq(122_000000)
        machine.freq(120_000000)
        print(i, [pyb.rng() for _ in range(4)])

On occasion the RNG will just return 0's, but will get fixed again on the
next loop (when PLLSAI is enabled by the change to a SYSCLK of 122MHz).

Fixes issue #4696.
2019-04-29 16:31:32 +10:00
Damien George d1dea4f577 javascript/library: Print data as raw bytes to stdout so unicode works. 2019-04-28 22:39:41 +10:00
Damien George bd6fed8201 javascript/Makefile: Fix unrepresentable float error by using clamp.
Otherwise converting large floats to ints will fail (as seen by the
builtin_float_hash.py test).
2019-04-28 22:17:42 +10:00
Damien George 93f5f80216 javascript: Pass (error) exit value out from script to process caller. 2019-04-28 22:16:27 +10:00
Damien George bd0bacb637 javascript/library: Use Buffer.alloc() since new Buffer() is deprecated. 2019-04-28 22:14:28 +10:00
Andrew Leech 70a28e3ad9 stm32/usb: Add USB device mode for VCP+VCP without MSC.
Selectable via pyb.usb_mode('VCP+VCP').
2019-04-28 21:31:47 +10:00
Damien George 0646e607b5 ports: Convert to use pyexec_file_if_exists() to execute boot/main.py.
The stm32 and nrf ports already had the behaviour that they would first
check if the script exists before executing it, and this patch makes all
other ports work the same way.  This helps when developing apps because
it's hard to tell (when unconditionally trying to execute the scripts) if
the resulting OSError at boot up comes from missing boot.py or main.py, or
from some other error.  And it's not really an error if these scripts don't
exist.
2019-04-26 15:22:14 +10:00
Damien George f66c4cbfa6 stm32/usbdev: Make USB device descriptors at runtime rather than static. 2019-04-26 10:07:49 +10:00
Damien George aa7b32c811 stm32/dac: Rework DAC driver to use direct register access.
This patch makes the DAC driver simpler and removes the need for the ST
HAL.  As part of it, new helper functions are added to the DMA driver,
which also use direct register access instead of the ST HAL.

Main changes to the DAC interface are:

- The DAC uPy object is no longer allocated dynamically on the heap,
  rather it's statically allocated and the same object is retrieved for
  subsequent uses of pyb.DAC(<id>).  This allows to access the DAC objects
  without resetting the DAC peripheral.  It also means that the DAC is only
  reset if explicitly passed initialisation parameters, like "bits" or
  "buffering".

- The DAC.noise() and DAC.triangle() methods now output a signal which is
  full scale (previously it was a fraction of the full output voltage).

- The DAC.write_timed() method is fixed so that it continues in the
  background when another peripheral (eg SPI) uses the DMA (previously the
  DAC would stop if another peripheral finished with the DMA and shut the
  DMA peripheral off completely).

Based on the above, the following backwards incompatibilities are
introduced:

- pyb.DAC(id) will now only reset the DAC the first time it is called,
  whereas previously each call to create a DAC object would reset the DAC.
  To get the old behaviour pass the bits parameter like: pyb.DAC(id, bits).

- DAC.noise() and DAC.triangle() are now full scale.  To get previous
  behaviour (to change the amplitude and offset) write to the DAC_CR (MAMP
  bits) and DAC_DHR12Rx registers manually.
2019-04-24 15:51:19 +10:00
Damien George 8402c26cfa stm32/powerctrl: Enable EIWUP to ensure RTC wakes device from standby. 2019-04-18 17:15:11 +10:00
Damien George 11657f2f20 stm32/system_stm32f0: Add support for using HSE and PLL as SYSCLK.
To configure the SYSCLK on an F0 enable one of:

    MICROPY_HW_CLK_USE_HSI48
    MICROPY_HW_CLK_USE_HSE
    MICROPY_HW_CLK_USE_BYPASS
2019-04-18 16:00:45 +10:00
Damien George f1774fa049 stm32/system_stm32f0: Enable PWR clock on startup.
To be consistent with how F4/F7/H7/L4 works in system_stm32.c.  The power
control peripheral is needed at least for the RTC.
2019-04-18 15:36:59 +10:00
Damien George 4ce0091449 esp32/README: Add info about pyparsing and the correct Python version.
See issue #4655.
2019-04-18 14:17:01 +10:00
Damien George 194d6b6788 stm32/timer: Correctly initialise extended break settings on F7/H7/L4.
Fixes issue #4693.
2019-04-15 11:41:03 +10:00
Damien George fd112239d6 stm32/rtc: Remove non-ASCII mu-character from source code comment.
And fix a typo in the comment on this line.
2019-04-12 11:32:24 +10:00
Damiano Mazzella 3c9f78b048 zephyr/CMakeLists.txt: Set AR to point to the Zephyr toolchain exe. 2019-04-11 12:24:05 +10:00
Damien George fc9f2ff0cd stm32/rtc: Remove unused LSE detection code. 2019-04-11 12:14:21 +10:00
Damien George 46e5d6b889 stm32/rtc: Add auto-LSE-bypass detection with fallback to LSE then LSI.
If MICROPY_HW_RTC_USE_BYPASS is enabled the RTC startup goes as follows:
- RTC is started with LSE in bypass mode to begin with
- if that fails to start (after a given timeout) then LSE is reconfigured
  in non-bypass
- if that fails to start then RTC is switched to LSI
2019-04-11 12:09:21 +10:00
Damien George 358364b45e stm32/boards/NUCLEO_L432KC: Disable complex nos and default frozen mods.
To save space, since this board only hase 256k of flash.
2019-04-09 11:23:08 +10:00
Damien George 4831e38c7e stm32/boards/NUCLEO_H743ZI: Add config options to support mboot. 2019-04-08 14:34:37 +10:00
Damien George fd13ce5e60 stm32/mboot: Add support for H7 MCUs, with H743 flash layout. 2019-04-08 14:33:57 +10:00
Damien George ae1e18a346 stm32/usbd_conf: Add support for USB HS peripheral on H7 MCUs. 2019-04-08 14:30:16 +10:00
Damien George 2c3fa4ad82 stm32/i2cslave: Add support for H7 MCUs. 2019-04-08 14:28:45 +10:00
Damien George fd523c53c3 stm32/network_wiznet5k: Automatically set MAC if device doesn't have one 2019-04-05 22:37:06 +11:00
Damien George 4f936afc44 stm32/network_wiznet5k: Add ability to set the MAC address. 2019-04-05 22:35:04 +11:00
Damien George 4410efc1e3 stm32/network_wiznet5k: Add ability to trace Ethernet TX and RX frames.
Via: nic.config(trace=2|4)
2019-04-05 22:33:49 +11:00
Damien George 69cb24a21d esp32/boards/sdkconfig: Disable WDT check of idle task on CPU1.
With dual-core enabled it's possible that the uPy task has full utilisation
of CPU1.  Fixes issue #4673.
2019-04-05 12:25:21 +11:00
Glenn Ruben Bakke 1f5d945afa nrf/Makefile: Update to match latest oofatfs version.
See corresponding commit b5f33ac2cb
2019-04-01 19:22:25 +02:00
Damien George 83f3c29d36 stm32/moduos: Allow to compile again without USB enabled. 2019-04-01 17:11:39 +11:00
Damien George 7ce2a08231 stm32: Add support for MMC driver, exposed via pyb.MMCard class.
Enable it via MICROPY_HW_ENABLE_MMCARD.
2019-04-01 17:04:43 +11:00
Damien George 9670b26526 stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD.
For consistency with the majority of other MICROPY_HW_ENABLE_xxx macros.
2019-04-01 15:21:26 +11:00
Damien George 7b5bf5f6fd stm32/uart: Handle correctly the char overrun case of RXNE=0 and ORE=1.
Fixes issue #3375.
2019-04-01 13:40:35 +11:00
roland van straten edd0e0f93d stm32/timer: Expose the PWM BRK capability of Timer 1 and 8.
The break mode is configurable via the 'brk' keyword to the Timer
constructor and init method.  It's disabled by default.
2019-04-01 13:30:37 +11:00
Andrew Leech 9d6f70f715 stm32: Make default USB_VCP stream go through uos.dupterm for main REPL.
Use uos.dupterm for REPL configuration of the main USB_VCP(0) stream on
dupterm slot 1, if USB is enabled.  This means dupterm can also be used to
disable the boot REPL port if desired, via uos.dupterm(None, 1).

For efficiency this adds a simple hook to the global uos.dupterm code to
work with streams that are known to be native streams.
2019-04-01 13:04:05 +11:00
Boris Vinogradov 6947dff7da stm32/Makefile: Allow to override CROSS_COMPILE with included Makefile. 2019-03-29 11:34:05 +11:00
Boris Vinogradov 1a608ce1e8 stm32/boards/STM32L476DISC: Enable servo support on STM32L476DISC board. 2019-03-28 15:35:58 +11:00
Damien George 92149c8a79 esp32/boards: Enable dual core support by default.
Single core is still supported, just by adding CONFIG_FREERTOS_UNICORE=y to
a custom sdkconfig file.
2019-03-27 11:20:21 +11:00
Damien George 815b79a8d0 esp32/mpthreadport: Exit vPortCleanUpTCB early if threading not init'd. 2019-03-27 11:11:06 +11:00
Damiano Mazzella 0b86ba565c unix/mpthreadport: Use named semaphores on Mac OS X.
Unnamed semaphores (via sem_init) are not supported on this OS.  See #4465.
2019-03-27 10:50:01 +11:00
Damien George 781947afdc stm32/mpconfigport.h: Remove malloc/free/realloc helper macros.
These macros are unused, and they can conflict with other entities by the
same name.  If needed they can be provided as static inline functions, or
just functions.

Fixes issue #4559.
2019-03-26 18:42:19 +11:00
roland van straten d396a7e10d stm32/system_stm32: Provide default value for HSI calibration.
If HSI is used the calibration value must be valid.  Fixes #4596.
2019-03-26 17:10:21 +11:00
Maureen Helm 2befcb8a9d zephyr/i2c: Add support for hardware i2c.
Adds support for hardware i2c to the zephyr port. Similar to other ports
such as stm32 and nrf, we only implement the i2c protocol functions
(readfrom and writeto) and defer memory operations (readfrom_mem,
readfrom_mem_into, and writeto_mem) to the software i2c implementation.
This may need to change in the future because zephyr is considering
deprecating its i2c_transfer function in favor of i2c_write_read; in this
case we would probably want to implement the memory operations directly
using i2c_write_read.

Tested with the accelerometer on frdm_k64f and bbc_microbit boards.
2019-03-26 16:16:26 +11:00
Damien George 673db939b5 esp32/machine_pin: Rework pull mode config to fix GPIO hold feature.
For gpio_hold_en() to work properly (not draw additional current) pull
up/down must be disabled when hold is enabled.  This patch makes sure this
is the case by reworking the pull constants to be a bit mask.
2019-03-26 15:21:23 +11:00
Glenn Ruben Bakke e0c6dfe90a nrf/readme: Add section about LTO.
Adding section about on how to disable use of the linker flag
-flto, by setting the LTO=0 argument to Make. Also, added a
note on recommended toolchains to use that works well with
LTO enabled.
2019-03-19 16:59:18 +01:00
Dave Hylands ec6e62efc2 stm32/mboot: Set USE_MBOOT=1 by default in the Makefile.
This allows boards that need USE_MBOOT to be built properly whether or not
USE_MBOOT=1 is specified when building mboot.
2019-03-18 14:01:43 +11:00
Glenn Ruben Bakke 696549d2e5 nrf/bluetooth: Deprecate use of SoftDevice s140 v6.0.0.
Removing linker script for nrf52840 s140 v6.0.0 as pca10056
target board now points to the new v6.1.1. Also, removing the
entry from the download_ble_stack.sh script.
2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke a3a266a9c3 nrf/board: Migrate nrf52840 target to new BLE stack.
This patch moves pca10056/nrf52840 target board to use
the new SoftDevice s140 v6.1.1 instead of the legacy v6.0.0.
2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke d3c1436e75 nrf/bluetooth: Add support for SoftDevice s140 version 6.1.1.
Updating download script to fetch the new SoftDevice, and
adding corresponding linker script for the BLE stack.
2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke 1e5e3e3d48 nrf/bluetooth: Deprecate use of SoftDevice s132 v6.0.0.
Removing linker script for nrf52832 s132 v6.0.0 as all target
boards now points to the new v6.1.1. Also, removing the entry
from the download_ble_stack.sh script.
2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke 5f26ef1112 nrf/board: Migrate all nrf52832 targets to new BLE stack.
This patch moves all the nrf52832 target boards to use the
new SoftDevice s132 v6.1.1 instead of the legacy v6.0.0.
2019-03-15 20:50:15 +01:00
Nguyen Hoan Hoang e8ed2dea71 nrf/bluetooth: Add support for SoftDevice s132 version 6.1.1.
Updating download script to fetch the new SoftDevice, and
adding corresponding linker script for the BLE stack.
2019-03-15 20:50:15 +01:00
roland van straten c9eb7eb449 stm32/stm32_it: Guard UART7_IRQHandler with check for UART7 define.
All STM32 with a UART7 also have a UART8 and vice versa, but this change
improves readability and allows for them to be independent in the future.
2019-03-14 14:02:21 +11:00
Damien George c7d19dc0ad ports/{stm32,esp8266}: Set mpy-cross native arch for frozen native code. 2019-03-14 12:22:49 +11:00
Damien George ddc934631c esp32/machine_pin: Add new PULL_HOLD pin pull mode. 2019-03-14 07:28:57 +11:00
Damien George 349b54525e esp32/machine_pin: Make it so None as pull value disables pull up/down.
Previously specifying None as the pull value would leave the pull up/down
state unchanged.  This change makes it so -1 leaves the state unchanged and
None makes the pin float, as per the docs.
2019-03-14 07:26:59 +11:00
Wolf Vollprecht ea2fcdd338 javascript: Fix Emscripten async load, and to compile with modern clang. 2019-03-13 23:52:15 +11:00
Rami Ali 7d675f3a17 javascript: Add new port targeting JavaScript via Emscripten.
In this port JavaScript is the underlying "machine" and MicroPython is
transmuted into JavaScript by Emscripten.  MicroPython can then run under
Node.js or in the browser.
2019-03-13 23:47:32 +11:00
Maureen Helm 493ee7df18 zephyr/prj_frdm_kw41z.conf: Add new board configuration.
Adds a new board configuration for the frdm_kw41z board, including support
for the fxos8700 accelerometer/magnetometer/die temperature sensor.
2019-03-12 17:12:13 +11:00
Maureen Helm 7748375b6e zephyr/prj_frdm_k64f.conf: Add fxos8700 sensor.
Adds the fxos8700 accelerometer/magnetometer/die temperature sensor to the
frdm_k64f board configuration.
2019-03-12 17:12:00 +11:00
Paul Sokolovsky 6d82499a48 zephyr/Makefile: Proxy ram_report, rom_report targets from Zephyr. 2019-03-12 17:11:52 +11:00
Paul Sokolovsky 755b0b807b zephyr/prj_minimal.conf: Switch to CONFIG_STDOUT_CONSOLE.
Prompted by code size analysis, after arduino_101 build overflowing ROM.
2019-03-12 17:11:46 +11:00
Paul Sokolovsky 21fc0c448e zephyr/modzsensor: Rename "TEMP" sensor channel to "DIE_TEMP".
I.e. on-die temperature sensor.  Upstream made more fine-grained channels
for different kinds of temperature.
2019-03-12 17:11:30 +11:00
Paul Sokolovsky a42c1d9fd5 zephyr/modzephyr: Revamp stacks_analyze() call.
Underlying k_call_stacks_analyze() was gone in Zephyr, reimplement using
k_thread_foreach().
2019-03-12 17:11:09 +11:00
Damien George 297092a76a esp32/mphalport: Use ets_delay_us for mp_hal_delay_us_fast.
The system provided one is in ROM and is more accurate.
2019-03-12 15:46:44 +11:00
Damien George fcace26d87 esp32/Makefile: Add some missing IDF source files to bootloader and app.
Functions in these files may be needed when certain features are enabled
(eg dual core mode), even if the linker does not give a warning or error
about unresolved symbols.
2019-03-11 23:17:09 +11:00
Petr Kracík 41e7ad647e esp32/modnetwork: Remove redundant esp_log include. 2019-03-08 23:36:07 +11:00
Petr Kracík 73c48b1b45 esp32/modnetwork: Implement RSSI for WiFi STA via WLAN.status('rssi'). 2019-03-08 23:35:28 +11:00
Andrew Leech 5688c9ba09 stm32/usb: Allow to override USB strings & VID/PID in app and mboot.
The override #define's should go in the board's mpconfigboard.h file.
2019-03-08 23:29:15 +11:00
Andrew Leech 0c60cb1fc4 stm32/qspi: Set pin speed to very-high and allow to config some options.
The default speed of the QSPI interface is 72Mhz whereas the standard AF
pin speed (high) is only rated to 50Mhz, so increase speed to very-high.
2019-03-08 23:17:50 +11:00
Andrew Leech 89ff506513 py: Update and rework build system for including external C modules.
How to use this feature is documented in docs/develop/cmodules.rst.
2019-03-08 22:58:42 +11:00
Andrew Leech cf22f4793c py: Allow registration of modules at their definition.
During make, makemoduledefs.py parses the current builds c files for
MP_REGISTER_MODULE(module_name, obj_module, enabled_define)

These are used to generate a header with the required entries for
"mp_rom_map_elem_t mp_builtin_module_table[]" in py/objmodule.c
2019-03-08 22:46:43 +11:00
Damien George e4ac104b7f stm32: Allow to build with threading with the GIL disabled. 2019-03-08 22:29:54 +11:00
Damien George c6a9bb23cd unix/Makefile: Update coverage tests to match those in Travis. 2019-03-08 16:51:09 +11:00
Damien George 7852b287df minimal/frozentest: Recompile now that mpy format and version changed. 2019-03-08 15:53:05 +11:00
Jim Mussared f2ebee9cf1 stm32/mboot: Update to match latest oofatfs version.
See corresponding commit b5f33ac2cb
2019-03-07 15:22:16 +11:00
Damien George 62483bb957 minimal/frozentest: Recompile now that mpy format changed. 2019-03-05 16:32:05 +11:00
Damien George b5f33ac2cb ports: Update to work with new oofatfs version. 2019-03-05 15:56:39 +11:00
Francisco J. Manno f938e70c69 stm32: Add compile-time option to use HSI as clock source.
To use HSI instead of HSE define MICROPY_HW_CLK_USE_HSI as 1 in the board
configuration file.  The default is to use HSE.

HSI has been made the default for the NUCLEO_F401RE board to serve as an
example, and because early revisions of this board need a hardware
modification to get HSE working.
2019-03-05 15:49:08 +11:00
Damien George e61862d063 stm32/boards: Update to use new build config for lwip component. 2019-03-04 23:34:03 +11:00
Damien George 78fe979d7d stm32: Use global lwip build config and support building without lwip. 2019-03-04 23:33:02 +11:00
Damien George 84479569de stm32/boards/STM32F769DISC: Use external QSPI flash to store some code.
This demonstrates how to use external QSPI flash in XIP (execute in place)
mode.  The default configuration has all extmod/ code placed into external
QSPI flash, but other code can easily be put there by modifying the custom
f769_qspi.ld script.
2019-03-04 22:40:15 +11:00
Damien George c8bbf2c170 stm32/Makefile: Allow a board to specify its linker sections for FW.
A board can now use the make variables TEXT0_SECTIONS and TEXT1_SECTIONS to
specify the linker sections that should go in its firmware.  Defaults are
provided which give the existing behaviour.
2019-03-04 22:26:55 +11:00
Damien George f8f2724297 stm32/qspi: Enable sample shift and disable timeout counter.
This makes the QSPI more robust, in particular the timeout counter should
not be used with memory mapped mode (see F7 errata).
2019-03-01 16:15:14 +11:00
Damien George 47e551ba59 cc3200/mpconfigport.h: Disable compiler optimisation of OrderedDict.
This port would rather keep the code size as RAM.
2019-03-01 15:24:29 +11:00
Damien George 8ce22662fe esp8266/modmachine: Call ets_event_poll after waiti in machine.idle.
Because "waiti 0" may have waited for a while (eg 500ms) and the internal
WDT may need to be fed immediately.

Fixes issue #4459.
2019-02-28 15:44:37 +11:00
Damien George 823b31e528 stm32/boards/NUCLEO_F429ZI: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George ed0a530614 stm32/boards/STM32F769DISC: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George b3513f54d3 stm32/boards/STM32F7DISC: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George 8daec24168 stm32/boards/NUCLEO_F767ZI: Enable lwIP and Ethernet peripheral. 2019-02-26 23:32:19 +11:00
Damien George ac3e2f380d stm32/modnetwork: Don't call NIC callback if it's NULL. 2019-02-26 23:32:19 +11:00
Damien George 08a24c5f41 stm32/mpconfigport.h: Enable lwIP concurrency protection mechanism. 2019-02-26 23:32:19 +11:00
Damien George c55709bf29 stm32/network_lan: Add high-level network.LAN interface to ETH driver. 2019-02-26 23:32:19 +11:00
Damien George c950a1a35d stm32/eth: Add low-level Ethernet MAC driver. 2019-02-26 23:32:19 +11:00
Damien George cc63e19332 stm32/mphalport: Add mp_hal_get_mac() helper function. 2019-02-26 23:32:07 +11:00
Damien George 75a35448e1 stm32/boards/NUCLEO_F767ZI: Fix up comments about HCLK computation. 2019-02-26 22:44:27 +11:00
Petr Kracík 21f9329d5d esp32/modnetwork: Fix wifi.isconnected to return False after disconnect.
esp_wifi_connect will return ESP_OK for the normal path of execution which
just means the reconnect is started, not that it is actually reconnected.
In such a case wifi.isconnected() should return False until the
reconnection is complete.  After reconnect a GOT_IP event is called and it
will change wifi_sta_connected back to True.
2019-02-26 00:49:40 +11:00
Damien George 55ff562c70 unix/modffi: Eliminate unused-argument warning when debugging disabled. 2019-02-25 14:53:17 +11:00
Petr Kracík 5801a003f0 esp32/network_lan: Make power arg to constructor optional.
A value of None for this argument is already supported, so the argument can
be made optional.
2019-02-21 23:29:10 +11:00
Petr Kracík 01c1432e32 esp32/modnetwork: Catch and report Ethernet events. 2019-02-21 23:28:51 +11:00
Petr Kracík 7d8c71c222 esp32/network_lan: Add arg to constructor to set clock mode for ETH PHY.
This optional parameter for network.LAN clock_mode can be used for cases
where the clock source is different from the default GPIO0.  Fixes #4502.
2019-02-21 23:28:17 +11:00
Stig Bjørlykke c72391c4ce nrf/pwm: Remove superfluous NULL in machine_hard_pwm_instances.
Remove unneeded NULL entry in machine_hard_pwm_instances[] when not
building for NRF52_SERIES.
2019-02-20 22:52:18 +01:00
Stig Bjørlykke 6ca03fe8bd nrf/readme: Update make flash command when defining board.
Update the "make flash" command sample to include BOARD parameter
when building for a specific target board.
2019-02-20 22:34:08 +01:00
Glenn Ruben Bakke ca2bb66127 nrf/bluetooth: Resolve compilation warning in ble_drv.c.
This patch makes sure that the char_data.props is first
assigned a value before other flags are OR'd in.
Resolves compilation warning on possible unitialized variable.
2019-02-20 07:25:51 +01:00
Glenn Ruben Bakke 0c6f5bc529 nrf/bluetooth: Improve advertisment behavior for nrf52 targets.
This patch makes sure that advertisment data is located in
persistent static RAM memory throughout the advertisment.

Also, setting m_adv_handle to predifined
BLE_GAP_ADV_SET_HANDLE_NOT_SET value to indicate first time
usage of the handle. Upon first advertisment configuration
this will be populated with a handle value returned by the
stack (s132/s140).
2019-02-20 07:25:51 +01:00
Glenn Ruben Bakke ee3a01f25c nrf/readme: Update link to nrfjprog download.
After new layout of nordicsemi.com the direct links to
command line tools (nrfjprog) has changed to become dynamic.
This patch removes the old direct links to each specific OS
variant and is replaced with one single link to the download
landing page instead.
2019-02-20 07:13:36 +01:00
Andrew Leech 8ed4a28dae stm32/sdram: Increase GPIO speed for SDRAM interface to "very high".
Currently all usages of mp_hal_pin_config_alt_static() set the pin speed to
"high" (50Mhz).  The SDRAM interface typically runs much faster than this
so should be set to the maximum pin speed.

This commit adds mp_hal_pin_config_alt_static_speed() which allows setting
the pin speed along with the other alternate function details.
2019-02-20 16:54:32 +11:00
Dave Hylands a270cf280b stm32/stm32_it: Fix RTC IRQ handler to handle all EXTI IRQs on F0 MCUs. 2019-02-19 15:17:47 +11:00
Dave Hylands 67b326d97e stm32/extint: Remove unused (and incorrect) EXTI defines. 2019-02-19 15:17:32 +11:00
Dave Hylands 3d17d9b578 stm32/extint: Add non-GPIO EXTI IRQ sources for F0. 2019-02-19 15:17:28 +11:00
Dave Hylands 92fec603d0 stm32/make-stmconst.py: Improve regex to parse more constants.
A few RTC constants weren't being parsed properly due to whitespace
differences, and this patch makes certain whitespace optional.  Changes
made:

- allow for no space between /*!< and EXTI, eg for:
  __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */

- allow for no space between semicolon and start of comment, eg for:
  __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
2019-02-19 15:17:28 +11:00
Dave Hylands 9441f4b682 stm32/extint: Fix RTC Alarm/FS USB EXTI constants for L4. 2019-02-19 15:17:28 +11:00
Dave Hylands 363900be5d stm32/extint: Fix ExtInt to work with non-GPIO pins. 2019-02-19 15:17:20 +11:00
Damien George 303f27f656 esp32/modsocket: Change socket.socket to be socket type rather than fun.
To make all ports consistent.  Addresses issue #4514.
2019-02-18 23:20:13 +11:00
Damien George c65e5c88b8 stm32/boards/stm32f429.ld: Increase uPy heap size by 64k for F429 MCU.
The F429 has 256k total RAM, with 64k already set aside for flash write
cache, so the uPy heap can be increased this much.
2019-02-18 13:18:59 +11:00
Damien George ed09e13943 esp32/modsocket: Fix usocket.send to accept anything with buffer proto. 2019-02-18 12:38:38 +11:00
Damien George c551169bd8 stm32/mboot: Add hook to run board-specific code early on startup. 2019-02-15 15:34:05 +11:00
Damien George 65b1fefa31 stm32/modmachine: Add ability to pass through user data to mboot. 2019-02-15 15:10:04 +11:00
Damien George 3669198403 stm32/mboot: Add support script which can program mboot and application. 2019-02-15 15:09:59 +11:00
Damien George 3d0c31e60e stm32/mboot: Move some BSS vars to new section that isn't zeroed out.
Zeroing out data on startup takes time and is not necessary for certain
variables.  So provide a declaration for such variables and use it.
2019-02-15 15:09:54 +11:00
Damien George ff04b78ffd stm32/mboot: Add support for loading gzip'd firmware from a filesystem.
This adds support to mboot to load and program application firmware from
a .dfu.gz file on the board's filesystem.  See mboot/README.md for details.
2019-02-15 15:09:48 +11:00
Andrew Leech 4daee31706 stm32/qspi: Use static af functions for pin configuration.
This allows qspi pin configuration to work on any supported platform.
2019-02-14 13:42:08 +11:00
Damien George be4e5b1f87 stm32/mboot/mphalport.h: Include genhdr/pins.h for access to pin names.
So that mboot configuration can use names like pyb_pin_X1.
2019-02-14 13:39:13 +11:00
Damien George f38397ba8d stm32/mboot/Makefile: Generate all pin header files from board pins.csv. 2019-02-14 13:36:32 +11:00
Damien George 7b2dc96251 stm32/boards/make-pins.py: Add cmdline options to support use by mboot. 2019-02-14 13:35:39 +11:00
Yonatan Goldschmidt bc4f8b438b extmod/moduwebsocket: Refactor `websocket` to `uwebsocket`.
As mentioned in #4450, `websocket` was experimental with a single intended
user, `webrepl`. Therefore, we'll make this change without a weak
link `websocket` -> `uwebsocket`.
2019-02-14 00:35:45 +11:00
Jolatomme d1acca3c71 stm32/boards/NUCLEO_L476RG: Add support for RNG, DAC and CAN1.
PLLQ is changed to get CAN working, and I2C1 pins are changed to those
prescribed by the board.
2019-02-14 00:28:28 +11:00
Damien George 26a1ae295f stm32/mboot/Makefile: Support specifying BOARD_DIR for custom board. 2019-02-14 00:01:14 +11:00
Yonatan Goldschmidt 66f0afc91d unix/modmachine: Handle repeated /dev/mem open errors.
If opening of /dev/mem has failed an `OSError` is appropriately raised, but
the next time `mem8/16/32` is accessed the invalid file descriptor is used
and the program gets a SIGSEGV.
2019-02-12 15:29:11 +11:00
Mike Causer 812969d615 all: Change PYB message prefix to MPY.
Replaces "PYB: soft reboot" with "MPY: soft reboot", etc.

Having a consistent prefix across ports reduces the difference between
ports, which is a general goal.  And this change won't break pyboard.py
because that tool only looks for "soft reboot".
2019-02-12 15:18:33 +11:00
Damien George d976e4f5e8 teensy/Makefile: Use common gchelper_m3.s code from lib/utils. 2019-02-12 15:12:24 +11:00
Damien George 6e30f96b0b ports: Convert legacy uppercase macro names to lowercase. 2019-02-12 14:54:51 +11:00
Damien George 019433a17e stm32/pendsv: Fix inline asm constant and prefix with # character. 2019-02-12 14:50:27 +11:00
Damien George d53dc04903 qemu-arm: Use gchelper code to get registers for GC scanning. 2019-02-12 14:48:29 +11:00
Damien George c9ece68d06 cc3200: Use common gchelper_m3.s code from lib/utils. 2019-02-12 14:41:48 +11:00
Damien George 3058d46892 stm32/gccollect: Use gchelper.h header instead of explicit declaration. 2019-02-12 14:38:30 +11:00
Damien George e6d97e8a0b stm32: Move gchelper assembler code to lib/utils for use by other ports. 2019-02-12 14:11:21 +11:00
Damien George e7332b0584 qemu-arm: Rework to run bare-metal on boards with Cortex-M CPUs.
Adds support for 3 Cortex-M boards, selectable via "BOARD" in the Makefile:
- microbit, Cortex-M0 via nRF51822
- netduino2, Cortex-M3 via STM32F205
- mps2-an385, Cortex-M3 via FPGA

netduino2 is the default board because it's supported by older qemu
versions (down to at least 2.5.0).
2019-02-12 13:50:01 +11:00
Damien George b546e4b7e9 stm32/pendsv: Fix NULL pointer when calling pendsv dispatch function. 2019-02-08 16:38:09 +11:00
Damien George 800871c0cb stm32/modnetwork: Change lwIP polling to be based on background systick. 2019-02-08 16:38:09 +11:00
Damien George 4d214edae8 stm32/systick: Provide better compile-time configurability of slots. 2019-02-08 15:31:02 +11:00
Damien George 18cfa156d6 stm32/pendsv: Add ability to schedule callbacks at pendsv IRQ level. 2019-02-08 01:20:13 +11:00
Damien George b178958c07 stm32/pendsv: Clean up pendsv IRQ handler and eliminate duplicate code. 2019-02-08 01:20:13 +11:00
Damien George 1bcf4afb10 stm32/systick: Make periodic systick callbacks use a cyclic func table.
Instead of checking each callback (currently storage and dma) explicitly
for each SysTick IRQ, use a simple circular function table indexed by the
lower bits of the millisecond tick counter.  This allows callbacks to be
easily enabled/disabled at runtime, and scales well to a large number of
callbacks.
2019-02-08 01:20:13 +11:00
Damien George 5fbda53d3c stm32/systick: Rename sys_tick_XXX functions to systick_XXX. 2019-02-08 01:20:09 +11:00
Damien George c33f538066 esp32/modmachine: Add support for changing the CPU frequency. 2019-02-07 22:51:55 +11:00
Damien George 1669e049de stm32/boards/STM32F769DISC: Configure for use with mboot by default.
This is a good board to demonstrate the use of Mboot because it only has a
USB HS port exposed so the native ST DFU mode cannot be used.  With Mboot
this port can be used.
2019-02-07 16:28:01 +11:00
Damien George be1b1835c3 stm32/boards/STM32F769DISC: Support the use of USB HS with external PHY. 2019-02-07 16:26:46 +11:00
Damien George b26046aca2 stm32/modmachine: Make bootloader() enter custom loader if it's enabled.
If a custom bootloader is enabled (eg mboot) then machine.bootloader() will
now enter that loader.  To get the original ST DFU loader pass any argument
to the function, like machine.bootloader(1).
2019-02-07 16:13:57 +11:00
Damien George ab423f2969 stm32/usbd_conf: Fully support USB HS with external PHY. 2019-02-07 16:09:25 +11:00
Damien George 9f9c5c19b0 stm32/usb: Use USB HS as main USB device regardless of USB_HS_IN_FS. 2019-02-07 16:09:08 +11:00
Damien George 03a8b1cc50 stm32/mboot: Allow deploying via deploy-stlink. 2019-02-07 16:06:05 +11:00
Damien George a81cb3576b stm32/mboot: Add support for GPIO ports G, H, I and J. 2019-02-07 16:04:48 +11:00
Damien George 39eb1e9f81 stm32/mboot: Add support for STM32F769 MCUs. 2019-02-07 16:04:06 +11:00
Damien George 9570297dd1 stm32/mboot: Use USB HS as main USB device regardless of USB_HS_IN_FS. 2019-02-07 16:03:18 +11:00
Damien George 43a894fb48 stm32/adc: Add basic support for ADC on a pin on STM32H7 MCUs. 2019-02-06 13:35:28 +11:00
Damien George b367c425e4 stm32/boards/stm32h743_af.csv: Add ADC entries to pin capability table. 2019-02-06 13:34:53 +11:00
Damien George 02682d52ce stm32/boards/make-pins.py: Add basic support for STM32H7 ADC periphs. 2019-02-06 13:34:23 +11:00
Damien George 6a95e74387 esp32: Use SPIRAM in mem-map mode so all of it can be used for uPy heap.
Also enable CONFIG_SPIRAM_IGNORE_NOTFOUND to allow boards with faulty or
missing SPIRAM to still boot.
2019-02-06 00:10:50 +11:00
Stig Bjørlykke 98f790b03a nrf/timer: Fix disabling Timer 1 when using soft PWM.
Don't exclude the Timer instance 1 entry from machine_timer_obj[] when
using soft PWM. The usage is already checked when creating the Timer,
so just create an empty entry.
2019-02-02 11:15:52 +01:00
Andrew Leech 67689bfd7e stm32/usb: Add flow control option for USB VCP data received from host.
It's off by default and can be enabled at run-time with:

    pyb.USB_VCP().init(flow=pyb.USB_VCP.RTS)
2019-01-31 23:31:26 +11:00
Stig Bjørlykke 63eae33b7b nrf/ticker: Remove duplicate NRFX_IRQ_PRIORITY_SET. 2019-01-31 17:50:10 +11:00
Ayke van Laethem e8678cd1c9 nrf/pin: Print pull information in Pin.__str__. 2019-01-31 17:38:13 +11:00
Ayke van Laethem 2d293873a6 nrf/pin: Cleanup Pin.__str__ to print relevant information.
Code size change:
nrf51: -44
nrf52: -52
2019-01-31 17:31:58 +11:00
Ayke van Laethem 4e1c2fc831 nrf: Shrink "<peripheral> does not exist" error messages.
Code size reductions:
nrf51: -132
nrf52: -188
2019-01-31 17:26:26 +11:00
Ayke van Laethem 1ba962ff57 nrf/uart: Remove unused machine.UART() parameters.
If needed these parameters can be added back and made functional one at a
time.  It's better to explicitly not support them than to silently allow
but ignore them.
2019-01-31 17:18:23 +11:00
Ayke van Laethem a293fa3d6d nrf/uart: Use formula instead of switch for baudrate calculation.
This saves a bit of code:
nrf51: -176
nrf52: -152
2019-01-31 17:06:59 +11:00
Paul Sokolovsky 2f5d113fad py/warning: Support categories for warnings.
Python defines warnings as belonging to categories, where category is a
warning type (descending from exception type). This is useful, as e.g.
allows to disable warnings selectively and provide user-defined warning
types.  So, implement this in MicroPython, except that categories are
represented just with strings.  However, enough hooks are left to implement
categories differently per-port (e.g. as types), without need to patch each
and every usage.
2019-01-31 16:48:30 +11:00
Damien George 86f06d6a87 stm32/sdcard: Don't use SD clock bypass on F7 MCUs.
With clock bypass enabled the attached SD card is clocked at the maximum
48MHz.  But some SD cards are unreliable at these rates.  Although it's
nice to have high speed transfers it's more important that the transfers
are reliable for all cards.  So disable this clock bypass option.
2019-01-31 12:49:48 +11:00
Damien George e5509a910f stm32/mboot: Add option to autodetect the USB port that DFU uses.
Enable in mpconfigboard.h via #define MBOOT_USB_AUTODETECT_USB (1).
Requires MICROPY_HW_USB_FS and MICROPY_HW_USB_HS to be enabled as well.
2019-01-31 12:05:39 +11:00
Damien George 4bed17e786 stm32/boards/stm32f429_af.csv: Fix typos in UART defs Tx->TX and Rx->RX.
Fixes issue #4445.
2019-01-31 01:02:42 +11:00
Damien George 3ff3e96865 esp8266/modmachine: In lightsleep, only waiti if wifi is turned off.
Otherwise the STA interface can't do DTIM sleeping correctly and power
consumption goes up.
2019-01-31 00:05:00 +11:00
Damien George d5d060ead9 nrf/modmachine: Rename machine.sleep to machine.lightsleep. 2019-01-30 14:15:38 +11:00
Damien George 0a954e0196 cc3200/modmachine: Rename machine.sleep to machine.lightsleep. 2019-01-30 14:15:08 +11:00
Damien George 808dc95ab8 esp8266/modmachine: Implement simple machine.lightsleep function.
Use of "waiti 0" reduces power consumption by about 3mA compared to a
time.sleep_ms call.
2019-01-30 14:05:53 +11:00
Damien George 2911e3554a esp8266/modmachine: Rename machine.sleep to machine.lightsleep.
While keeping machine.sleep as an alias for machine.lightsleep for
backwards compatibility.
2019-01-30 14:05:53 +11:00
Damien George d7cc92383c esp8266/modmachine: Implement optional time_ms arg to machine.deepsleep. 2019-01-30 14:05:53 +11:00
Damien George 8de17b3d96 esp32/modmachine: Rename machine.sleep to machine.lightsleep.
While keeping machine.sleep as an alias for machine.lightsleep for
backwards compatibility.
2019-01-30 13:00:26 +11:00
Damien George dadee5fa24 esp32/modsocket: Fix crashes when connect/bind can't resolve given addr.
Fixes issue #4441.
2019-01-30 12:40:50 +11:00
Damien George 38022ddb2c stm32/main: Make board-defined UART REPL use a static object and buffer.
This way the UART REPL does not need the MicroPython heap and exists
outside the MicroPython runtime, allowing characters to still be received
during a soft reset.
2019-01-28 22:56:55 +11:00
Damien George f431795caf esp32/boards: Use auto xtal freq config instead of default 40MHz.
Auto-detection of the crystal frequency is convenient and allows for a
single binary for many different boards.  But it can be unreliable in
certain situations so in production, for a given board, it's recommended to
configure the correct fixed frequency.
2019-01-28 20:42:12 +11:00
Damien George 5d88272342 esp32/Makefile: Make sure that directory exists for sdkconfig.h. 2019-01-28 20:41:13 +11:00
Damien George 9ac9aa989c esp32/machine_timer: Deinit all active timers on soft reset.
Otherwise they will keep triggering the callback and access invalid data on
the heap.
2019-01-28 16:16:03 +11:00
Damien George 3d49b157b8 esp32: Update to latest ESP IDF using sdkconfig and new ldgen procedure.
Configuration for the build is now specified using sdkconfig rather than
sdkconfig.h, which allows for much easier configuration with defaults from
the ESP IDF automatically applied.  sdkconfig.h is generated using the new
ESP IDF kconfig_new tool written in Python.  Custom configuration for a
particular ESP32 board can be specified via the make variable SDKCONFIG.

The esp32.common.ld file is also now generated using the standard ESP IDF
ldgen.py tool.
2019-01-28 12:44:03 +11:00
Damien George f59904f799 esp32/Makefile: Put all IDF compenents in .a libs to use IDF ld script.
When the ESP IDF builds a project it puts all separate components into
separate .a library archives.  And then the esp32.common.ld linker script
references these .a libraries by explicit name to put certain object files
in iRAM.

This patch does a similar thing for the custom build system used here,
putting all IDF .o's into their respective .a.  So a custom linker script
is no longer needed.
2019-01-28 12:41:37 +11:00
Damien George e7ab475276 esp32: Don't put py/scheduler.o in iRAM, it's no longer needed.
ISR's no longer need to be in iRAM, and the ESP IDF provides an option to
specify that they are in iRAM if an application needs lower latency when
handling them.  But we don't use this feature for user interrupts: both
timer and gpio ISR routines are registered without the ESP_INTR_FLAG_IRAM
option, and so the scheduling code no longer needs to be in iRAM.
2019-01-27 16:15:47 +11:00
Damien George 4caf5b2358 stm32/usbdev: Add USB config option for max power drawn by the board.
The new compile-time option is MICROPY_HW_USB_MAX_POWER_MA.  Set this in
the board configuration file to the maximum current in mA that the board
will draw over USB.  The default is 500mA.
2019-01-27 14:02:10 +11:00
Damien George 7d8db42d17 stm32/usbdev: Add USB config option for board being self powered.
The new compile-time option is MICROPY_HW_USB_SELF_POWERED.  Set this
option to 1 in the board configuration file to indicate that the USB device
is self powered.  This option is disabled by default (previous behaviour).
2019-01-27 13:52:43 +11:00
Damien George c2886868b9 stm32/rtc: Check RTCEN=1 when testing if RTC is already running on boot.
It can be that LSEON and LSERDY are set yet the RTC is not enabled (this
can happen for example when coming out of the ST DFU mode on an F405 with
the RTC not previously initialised).  In such a case the RTC is never
started because the code thinks it's already running.  This patch fixes
this case by always checking if RTCEN is set when booting up (and also
testing for a valid RTCSEL value in the case of using an LSE).
2019-01-27 13:21:31 +11:00
stijn 42863830be py: Add optional support for 2-argument version of built-in next().
Configurable via MICROPY_PY_BUILTINS_NEXT2, disabled by default.
2019-01-27 13:01:28 +11:00
Reagan Sanders 51577629b2 cc3200/mods/modussl: Fix ca_certs arg validation in mod_ssl_wrap_socket.
Commit a0d97fe408 changed the argument index
of ca_certs but missed updating one of the references to the new index.
2019-01-27 12:51:34 +11:00
Mikhail Zakharov 18723e9889 unix/mpthreadport: Remove busy wait loop in thread garbage collection.
One can't use pthread calls in a signal handler because they are not
async-signal-safe (see man signal-safety).  Instead, sem_post can be used
to post from within a signal handler and this should be more efficient than
using a busy wait loop, waiting on a volatile variable.
2019-01-27 12:40:10 +11:00
Mikhail Zakharov 1e7b422226 unix/mpthreadport: Cleanup used memory on thread exit. 2019-01-27 12:39:45 +11:00
Mikhail Zakharov f8c1be85d1 unix/mpthreadport: Add thread deinit code to stop threads on exit.
Free unused memory for threads and cancel any outstanding threads on
interpreter exit to avoid possible segmentaiton fault.
2019-01-27 12:38:23 +11:00
Damien George 285d265eee stm32: Implement machine.lightsleep(). 2019-01-27 11:13:32 +11:00
Damien George 6d480f50ac pic16bit: Update to compile with latest xc16 v1.35 compiler.
This port has been verified to work with these latest changes.
2019-01-25 16:06:13 +11:00
Damien George da72bb6833 esp32/machine_hw_spi: Make HW SPI objects statically allocated.
This aligns more closely with the hardware, that there are two, fixed HW
SPI peripherals.  And it allows to recreate the HW SPI objects without
error, as well as create them again after a soft reset.

Fixes issue #4103.
2019-01-23 23:47:36 +11:00
Damien George d82f344f61 esp32/machine_hw_spi: Use separate DMA channels for HSPI and VSPI.
Otherwise only one of HSPI or VSPI can be used at a time.  Fixes
issue #4068.
2019-01-23 23:40:06 +11:00
Matt Trentini cd52d2c691 esp32/modules/neopixel.py: Change NeoPixel to different default timings.
In order to suit the more common 800KHz by default (instead of 400KHz), and
also have the same behaviour as the esp8266 port.

Resolves #4396.

Note! This is a breaking change. Anyone that has previously used the
NeoPixel class on an ESP32 board may be affected.
2019-01-23 14:22:38 +11:00
Damien George 18d3a5df26 esp8266/esp_mphal: Provide mp_hal_pin_od_high_dht so DHT works reliably.
The original behaviour of open-drain-high was to use the open-drain mode of
the GPIO pin, and this seems to make driving a DHT more reliable.  See
issue #4233.
2019-01-22 00:26:04 +11:00
Damien George eb446ec227 esp32/Makefile: Use system provided math library rather than uPy one.
The ESP IDF system already provides a math library, and that one is likely
to be better tuned to the Xtensa architecture.  The IDF components are also
tested against its own math library, so best not to override it.  Using the
system provided library also allows to easily switch to double-precision
floating point by changing MICROPY_FLOAT_IMPL to MICROPY_FLOAT_IMPL_DOUBLE.
2019-01-17 16:43:20 +11:00
Damien George 90f86a0197 esp32/machine_pin: Add Pin.off() and Pin.on() methods. 2019-01-16 17:33:56 +11:00
Damien George 36808d4e6a esp8266/main: Activate UART(0) on dupterm for REPL before boot.py runs.
So that the user can explicitly deactivate UART(0) if needed.  See
issue #4314.

This introduces some risk to "brick" the device, if the user disables the
REPL without providing an alternative REPL (eg WebREPL), or any way to
reenable it.  In such a case the device needs to be erased and
reprogrammed.  This seems unavoidable, given the desire to have the option
to use the UART for something other than the REPL.
2019-01-16 17:24:23 +11:00
Damien George 3431ea7205 stm32/main: Make thread and FS state static and exclude when not needed.
Without the static qualifier these objects will be kept by the linker even
if they are unused.  So this patch saves some RAM when these features are
unused by a board.
2019-01-11 01:52:17 +11:00
Damien George 5b66c7b712 stm32/wdt: Make singleton WDT object const so it goes in ROM. 2019-01-11 01:51:57 +11:00
Damien George f350b640a0 esp32/modsocket: For socket read only release GIL if socket would block.
If there are many short reads to a socket in a row (eg by readline) then
releasing and acquiring the GIL each time will give very poor throughput.
So first poll the socket to see if it has data, and if it does then don't
release the GIL.
2019-01-10 15:46:44 +11:00
Damien George efe0569c26 esp32/mphalport: When tx'ing to REPL only release GIL if many chars sent
Otherwise, if multiple threads are active, printing data to the REPL may be
very slow because in some cases only one character is output per call to
mp_hal_stdout_tx_strn.
2019-01-10 15:43:47 +11:00
Damien George b33f108cde stm32/sdcard: Properly reset SD periph when SDMMC2 is used on H7 MCUs. 2018-12-30 01:28:34 +11:00
roland 4d8504425a stm32/modmachine: Fix reset_cause to correctly give DEEPSLEEP on L4 MCU.
Before this fix it returned SOFT_RESET after waking from a deepsleep
(standby).
2018-12-30 01:11:25 +11:00
Damien George f334816df0 stm32/uart: Make sure user IRQs are handled even with a keyboard intr. 2018-12-30 01:03:22 +11:00
Damien George 7bdbea9a0c stm32/uart: Clear overrun error flag after reading RX data register.
On MCUs other than F4 the ORE (overrun error) flag needs to be cleared
independently of clearing RXNE, even though both are wired to trigger the
same RXNE IRQ.  In the case that an overrun occurred it's necessary to
explicitly clear the ORE flag or else the RXNE interrupt will keep firing.
2018-12-30 00:59:16 +11:00
Damien George 0d860fdcd0 stm32/uart: Always enable global UART IRQ handler on init.
Otherwise IRQs may not be enabled for the user UART.irq() handler.  In
particular this fixes the user IRQ_RXIDLE interrupt so that it triggers
even when there is no RX buffer.
2018-12-29 22:44:41 +11:00
Damien George a5f7a3022d stm32/uart: Fix uart_rx_any in case of no buffer to return 0 or 1. 2018-12-29 22:43:35 +11:00
Tobias Badertscher 372e7a4dc6 stm32: Implement UART.irq() method with initial support for RX idle IRQ. 2018-12-29 17:21:37 +11:00
Andrew Leech ce0c581179 stm32/main: Add board config option to enable/disable mounting SD card.
The new option MICROPY_HW_SDCARD_MOUNT_AT_BOOT can now be defined to 0 in
mpconfigboard.h to allow SD hardware to be enabled but not auto-mounted at
boot.  This feature is enabled by default to retain previous behaviour.

Previously, if an SD card is enabled in hardware it is also used to boot
from.  While this can be disabled with a SKIPSD file on internal flash,
this wont be available at first boot or if the internal flash gets
corrupted.
2018-12-22 01:30:47 +11:00
Damien George 0c46419323 windows: Remove remaining traces of old GNU readline support.
GNU readline support for the unix port was removed in
acaa30b604 and in
5e83a75c78, so it's also no longer supported
in the windows port.
2018-12-15 13:54:55 +11:00
Damien George 5146e79490 stm32/boards/NUCLEO_L432KC: Specify L4 OpenOCD config file for this MCU. 2018-12-13 13:45:16 +11:00
Damien George 59f409a787 stm32/boards: Allow OpenOCD stm_flash procedure to accept single FW img.
To support deplop-openocd on target boards that use TEXT0_ADDR only and
have their firmware in a single binary image.
2018-12-13 13:43:10 +11:00
Paul Sokolovsky fbb8335084 py/objdict: Make .fromkeys() method configurable.
On by default, turned off for minimal/bare-arm. Saves 144 bytes on x86.
2018-12-13 01:20:55 +11:00
Damien George 1db55381b6 stm32/adc: Support 16-bit ADC configuration on H7 MCUs. 2018-12-12 12:51:46 +11:00
Damien George 6cab8daee0 stm32/adc: Increase ADC sampling time for internal sources on H7 MCUs. 2018-12-12 12:51:26 +11:00
Damien George 0555ada277 stm32/adc: Fix calibrated volt/temp readings on H7 by using 16bit scale. 2018-12-12 12:50:37 +11:00
Damien George 1b4031ed64 stm32/extint: Use correct EXTI channels on H7 MCUs for RTC events. 2018-12-12 12:49:23 +11:00
Glenn Ruben Bakke 9e5768a6db nrf/bluetooth: Update BLE stack download script.
Due to new webpages at nordicsemi.com, the download links
for Bluetooth LE stacks were broken.

This patch updates the links to new locations for the current
targets.
2018-12-10 20:42:06 +01:00
Damien George 025d419a77 teensy: Add own uart.h to not rely on stm32's version of the file. 2018-12-10 23:55:11 +11:00
Damien George dc23978dde stm32/uart: Add ability to have a static built-in UART object.
A static UART is useful for internal peripherals that require a UART and
need to persist outside the soft-reset loop.
2018-12-10 16:21:50 +11:00
Damien George 61ef031687 stm32/uart: Move config of char_width/char_mask to uart.c. 2018-12-10 16:21:50 +11:00
Damien George 6ea45277bf stm32/uart: For UART init, pass in params directly, not via HAL struct.
To provide a cleaner and more abstract C-level interface to the UART.
2018-12-10 16:21:50 +11:00
Damien George e0c2432503 stm32/uart: Simplify deinit of UART, no need to call HAL.
The HAL just clears UE and then clears all the UART control registers.
2018-12-10 16:21:50 +11:00
Damien George bc3f0dddac stm32/uart: Remove HAL's UART_HandleTypeDef from UART object struct.
This UART_HandleTypeDef is quite large (around 70 bytes in RAM needed for
each UART object) and is not needed: instead the state of the peripheral
held in its registers provides all the required information.
2018-12-10 16:21:50 +11:00
Damien George 7d7f59d78b stm32/uart: Factor out code to set RX buffer to function uart_set_rxbuf. 2018-12-10 16:21:50 +11:00
Damien George 9690757cca stm32/uart: Rework uart_get_baudrate so it doesn't need a UART handle. 2018-12-10 16:21:50 +11:00
Damien George 524e13b006 stm32/uart: Factor out code from machine_uart.c that computes baudrate. 2018-12-10 16:21:50 +11:00
Damien George a2271532be stm32: Split out UART Python bindings from uart.c to machine_uart.c. 2018-12-10 16:21:50 +11:00
Damien George da7355e213 esp32/modmachine: Enable machine.sleep() now that the IDF supports it. 2018-12-06 17:23:27 +11:00
Damien George 9c6c32cc51 esp32/machine_pwm: On deinit stop routing PWM signal to the pin.
Fixes issue #4273.
2018-12-06 17:05:16 +11:00
Damien George 287b02d98a esp32/machine_pwm: Support higher PWM freq by auto-scaling timer res. 2018-12-06 16:43:39 +11:00
Damien George 87623082e3 esp32/machine_uart: Implement UART.sendbreak() method.
The uart_write_bytes_with_break() function requires non-zero data to be
sent before the break, so a standalone break must be synthesised.
2018-12-06 15:40:22 +11:00
boochow 69b7b8fa12 stm32/boards: Add NUCLEO_L432KC board configuration files. 2018-12-06 13:33:29 +11:00
boochow 9d3372bded stm32: Add peripheral support for STM32L432.
The L432 does not have: GPIOD, TIM3, SPI2, ADC dual mode operation, 2-banks
flash.
2018-12-06 13:32:43 +11:00
boochow 1a8baad7ca stm32/boards: Add STM32L432KC chip configuration files.
The pin alternate function information is derived from ST's datasheet
https://www.st.com/resource/en/datasheet/stm32l432kc.pdf
In the datasheet, the line 2 of AF4 includes I2C2 but actually the chip
does not have I2C2 so it is removed.
2018-12-06 13:32:43 +11:00
Damien George 52bec93755 esp8266/machine_uart: Add rxbuf keyword arg to UART constructor/init.
As per the machine.UART documentation, this is used to set the length of
the UART RX buffer.
2018-12-05 23:31:24 +11:00
Damien George 9ddc182ec7 esp32/machine_uart: Add txbuf/rxbuf keyword args to UART construct/init.
As per the machine.UART documentation, these are used to set the length of
the TX and RX buffers.
2018-12-05 16:48:34 +11:00
Damien George 8007d0bd16 stm32/uart: Add rxbuf keyword arg to UART constructor and init method.
As per the machine.UART documentation, this is used to set the length of
the RX buffer.  The legacy read_buf_len argument is retained for backwards
compatibility, with rxbuf overriding it if provided.
2018-12-05 13:24:11 +11:00
Damien George c6365ffb92 stm32/powerctrl: Add support for standby mode on L4 MCUs.
This maps to machine.deepsleep() which is now supported.
2018-12-05 00:40:05 +11:00
Damien George a1c81761b1 stm32/mboot: Add documentation for using mboot on PYBv1.x. 2018-12-04 23:48:47 +11:00
Damien George c040961e91 stm32/boards: Add configuration for putting mboot on PYBv1.x. 2018-12-04 23:48:18 +11:00
Damien George eed522d69f stm32/mboot: Add support for 4th board LED. 2018-12-04 23:14:30 +11:00
Damien George 13e92e1225 stm32/mboot: Provide led_state_all function to reduce code size. 2018-12-04 23:11:51 +11:00
Damien George 9262f54138 stm32/uart: Always show the flow setting when printing a UART object.
Also change the order of printing of flow so it is after stop (so bits,
parity, stop are one after the other), and reduce code size by using
mp_print_str instead of mp_printf where possible.

See issue #1981.
2018-12-04 19:16:16 +11:00
Damien George da1d849ad1 stm32,esp8266,cc3200: Use MICROPY_GC_STACK_ENTRY_TYPE to save some RAM. 2018-12-04 18:32:10 +11:00
Damien George 62b4bebf64 esp8266/modnetwork: Wait for iface to go down before forcing power mgmt.
If the STA interface is connected to an AP then it must be fully
disconnected and deactivated before forcing the power management on.
2018-12-04 10:20:45 +11:00
roland 10bddc5c28 stm32/boards/STM32F429DISC: Enable UART as secondary REPL.
The board(s) feature a VCOM through the ST-LINK, this feature is something
to keep around.
2018-12-01 17:30:48 +11:00
Damien George 321d75e087 esp8266/modnetwork: Automatically do radio sleep if no interface active.
Reduces current of device by about 55mA when radio is sleeping.
2018-12-01 17:20:05 +11:00
Damien George 9e2dd93145 esp8266/ets_alt_task: Process idle callback if no other events occurred. 2018-12-01 17:20:05 +11:00
Damien George 485514f57a esp32: Allocate task TCB and stack from system heap not uPy heap.
This is necessary for two reasons: 1) FreeRTOS still needs the TCB data
structure even after vPortCleanUpTCB has been called, so this latter hook
function cannot free the TCB, and there is no where else to safely delete
it (this behaviour has changed recently in the ESP IDF); 2) when using
external SPI RAM the uPy heap is in this external memory but the task stack
must be allocated from internal SRAM.

Fixes issue #3904.
2018-11-28 15:00:45 +11:00
Damien George 0233049b79 esp32/mpthreadport: Prevent deadlocks when deleting all threads.
vTaskDelete now immediately calls vPortCleanUpTCB, which requires the
thread_mutex mutex, so vTaskDelete must be called after this mutex is
released.
2018-11-28 14:30:11 +11:00
Damien George afd1ce0c15 stm32/powerctrl: Disable IRQs during stop mode to allow reconfig on wake 2018-11-28 12:44:54 +11:00
Damien George 66ca8e9b2c stm32/powerctrl: Move (deep)sleep funcs from modmachine.c to powerctrl.c 2018-11-28 12:22:20 +11:00
Damien George 3a723ad2fe stm32/usb: Fully deinitialise USB periph when it is deactivated. 2018-11-28 12:06:47 +11:00
Damien George 5f67b03e99 stm32/servo: Only initialise TIM5 if it is needed, to save power. 2018-11-28 12:06:24 +11:00
Paul Sokolovsky 80aca27a40 unix/modos: Rename unlink to remove to be consistent with other ports.
We standardized to provide uos.remove() as a more obvious and user-friendly
name.  That's what written in the docs.  The Unix port implementation
predates this convention, so update it now.
2018-11-26 23:27:04 +11:00
Michael Paul Coder fe452afab2 stm32/flashbdev: Add missing include for irq.h.
This is required for mboot to build.
2018-11-26 16:34:13 +11:00
Tobias Badertscher 9acc32b40f stm32/adc: Add ADC auto-calibration for L4 MCUs.
This increases the precision of the ADC.
2018-11-26 16:16:29 +11:00
Damien George 51482ba925 README: Remove references to "make axtls", it's no longer needed.
Since 0be2ea50e9 axtls is automatically built
as part of the usual "make" build process.
2018-11-15 14:48:17 +11:00
roland 30ed2b3cab stm32/system_stm32: Introduce configuration defines for PLL3 settings.
A board must be able to set the PLL3 values based on the HSE that it uses.
2018-11-01 13:25:47 +11:00
Damien George 746dbf78d3 py/py.mk: When building axtls use -Wno-all to prevent all warnings.
Building axtls gives a lot of warnings with -Wall enabled, and explicitly
disabling all of them cannot be done in a way compatible with gcc and
clang, and likely other compilers.  So just use -Wno-all to prevent all of
the extra warnings (in addition to the necessary -Wno-unused-parameter,
-Wno-uninitialized, -Wno-sign-compare and -Wno-old-style-definition).

Fixes issue #4182.
2018-10-27 23:53:08 +11:00
Paul m. p. P 454cca6016 py/objmodule: Implement PEP 562's __getattr__ for modules.
Configurable via MICROPY_MODULE_GETATTR, disabled by default.  Among other
things __getattr__ for modules can help to build lazy loading / code
unloading at runtime.
2018-10-23 11:22:50 +11:00
Paul Sokolovsky 5a91fce9f8 py/objstr: Make str.count() method configurable.
Configurable via MICROPY_PY_BUILTINS_STR_COUNT.  Default is enabled.
Disabled for bare-arm, minimal, unix-minimal and zephyr ports.  Disabling
it saves 408 bytes on x86.
2018-10-22 22:49:05 +11:00
Eric Poulsen 3c6f639aa5 esp32/network_ppp: Add PPPoS functionality.
This commit adds network.PPP(stream) which allows to create a TCP/IP
network interface over a stream object (eg a UART).
2018-10-19 23:32:02 +11:00
Eric Poulsen 5e5aef53fb esp32/modesp32: Add hall_sensor() function. 2018-10-19 17:28:02 +11:00
Paul Sokolovsky 6ddcfe68b8 unix/Makefile: Allow to override/omit pthread lib name.
For example, on Android, pthread functions are part of libc, so LIBPTHREAD
should be empty.
2018-10-19 17:22:37 +11:00
Damien George d2c5496894 stm32/boards/stm32h743.ld: Fix total flash size, should be 2048k.
Fixes issue #4240.
2018-10-17 15:29:56 +11:00
iabdalkader f0db1a5ab1 stm32/spi: Fix calculation of SPI clock source on H7 MCUs. 2018-10-17 15:26:26 +11:00
Paul Sokolovsky 6c5b2bded2 unix/modffi: Add support for "q"/"Q" specs (int64_t/uint64_t). 2018-10-17 15:17:05 +11:00
Paul Sokolovsky 0c18633ea9 unix/modusocket: Finish socket.settimeout() implementation.
1. Return correct error code for non-blocking vs timed out socket
(POSIX returns EAGAIN for both, we want ETIMEDOUT in case of timed
out socket). To achieve this, blocking/non-blocking flag is added
to the mp_obj_socket_t, to avoid issuing fcntl() syscall each time
EAGAIN occurs. (mp_obj_socket_t used to be 8 bytes, having some room
in a standard 16-byte alloc block.)

2. Handle socket.settimeout(0) properly - in Python, that means
non-blocking mode, but SO_RCVTIMEO/SO_SNDTIMEO of 0 is infinite
timeout.

3. Overall, make sure that socket.settimeout() call switches blocking
state as expected.
2018-10-17 14:19:06 +11:00
Danielle Madeley 80a25810f9 unix/modusocket: Initial implementation of socket.settimeout(). 2018-10-17 14:19:06 +11:00
Damien George 0f6f86ca49 stm32/usbd_cdc_interface: Refactor USB CDC tx code to not use SOF IRQ.
Prior to this commit the USB CDC used the USB start-of-frame (SOF) IRQ to
regularly check if buffered data needed to be sent out to the USB host.
This wasted resources (CPU, power) if no data needed to be sent.

This commit changes how the USB CDC transmits buffered data:
- When new data is first available to send the data is queued immediately
  on the USB IN endpoint, ready to be sent as soon as possible.
- Subsequent additions to the buffer (via usbd_cdc_try_tx()) will wait.
- When the low-level USB driver has finished sending out the data queued
  in the USB IN endpoint it calls usbd_cdc_tx_ready() which immediately
  queues any outstanding data, waiting for the next IN frame.

The benefits on this new approach are:
- SOF IRQ does not need to run continuously so device has a better chance
  to sleep for longer, and be more responsive to other IRQs.
- Because SOF IRQ is off, current consumption is reduced by a small amount,
  roughly 200uA when USB is connected (measured on PYBv1.0).
- CDC tx throughput (USB IN) on PYBv1.0 is about 2.3 faster (USB OUT is
  unchanged).
- When USB is connected, Python code that is executing is slightly faster
  because SOF IRQ no longer interrupts continuously.
- On F733 with USB HS, CDC tx throughput is about the same as prior to this
  commit.
- On F733 with USB HS, Python code is about 5% faster because of no SOF.

As part of this refactor, the serial port should no longer echo initial
characters when the serial port is first opened (this only used to happen
rarely on USB FS, but on USB HS is was more evident).
2018-10-15 15:37:01 +11:00
Damien George 53ccbe6cec stm32/usbd_cdc_interface: Handle disconnect IRQ to set VCP disconnected.
pyb.USB_VCP().isconnected() will now return False if the USB is
disconnected after having previously been connected.

See issue #4210.
2018-10-15 12:24:40 +11:00
Glenn Ruben Bakke 11bc38d55f nrf/bluetooth: Set GAP_ADV_MAX_SIZE to 31 (s132/s140).
For s132 and s140, GAP_ADV_MAX_SIZE was currently set to
BLE_GATT_ATT_MTU_DEFAULT, which is 23. The correct value
should have been 31, but there are no define for this in
the s132/s140 header files as for s110.

Updating define in ble_drv.c to the correct value of 31.
2018-10-11 23:38:11 +02:00
Andrew Leech 338635ccc6 stm32/main: Add configuration macros for board to set heap start/end.
The macros are MICROPY_HEAP_START and MICROPY_HEAP_END, and if not defined
by a board then the default values will be used (maximum heap from SRAM as
defined by linker symbols).

As part of this commit the SDRAM initialisation is moved to much earlier in
main() to potentially make it available to other peripherals and avoid
re-initialisation on soft-reboot.  On boards with SDRAM enabled the heap
has been set to use that.
2018-10-05 17:30:18 +10:00
stijn 02ca8d4674 windows/msvc: Implement file/directory type query.
Add some more POSIX compatibility by adding a d_type field to the
dirent structure and defining corresponding macros so listdir_next
in the unix' port modos.c can use it, end result being uos.ilistdir
now reports the file type.
2018-10-05 17:14:33 +10:00
stijn 397ee7c00e windows/msvc: Fix incorrect indentation in dirent.c. 2018-10-05 17:14:33 +10:00
Paul Sokolovsky b9bad7ff92 unix/moduselect: Raise OSError(ENOENT) if obj to modify is not in poller
Previously, the function silently succeeded. The new behavior is consistent
with both baremetal uselect implementation and CPython 3.
2018-10-05 16:56:43 +10:00
Damien George bbccb0f630 esp8266: Remove scanning of GC pointers in native code block.
The native code no longer holds live GC pointers so doesn't need to be
scanned.
2018-09-27 23:46:09 +10:00
Paul Sokolovsky af2030dec6 unix/mpconfigport.h: Enable MICROPY_PY_UHASHLIB_MD5 for uhashlib.md5.
This will allow to e.g. implement HTTP Digest authentication.

Adds 540 bytes for x86_32, 332 for arm_thumb2 (for Unix port, which already
includes axTLS library).
2018-09-26 15:12:28 +10:00
Damien George 84090edaa3 stm32/mpconfigport.h: Enable math.factorial, optimised version. 2018-09-26 15:05:19 +10:00
Christopher Swenson 8c656754aa py/modmath: Add math.factorial, optimised and non-opt implementations.
This commit adds the math.factorial function in two variants:
- squared difference, which is faster than the naive version, relatively
  compact, and non-recursive;
- a mildly optimised recursive version, faster than the above one.

There are some more optimisations that could be done, but they tend to take
more code, and more storage space.  The recursive version seems like a
sensible compromise.

The new function is disabled by default, and uses the non-optimised version
by default if it is enabled.  The options are MICROPY_PY_MATH_FACTORIAL
and MICROPY_OPT_MATH_FACTORIAL.
2018-09-26 15:03:04 +10:00
Damien George 7b452e7466 stm32/usbd_conf: Allocate enough space in USB HS TX FIFO for CDC packet.
The CDC maximum packet size is 512 bytes, or 128 32-bit words, and the TX
FIFO must be configured to have at least this size.
2018-09-26 12:00:56 +10:00
Damien George 6ea6c7cc9e stm32/powerctrl: Don't configure clocks if already at desired frequency.
Configuring clocks is a critical operation and is best to avoid when
possible.  If the clocks really need to be reset to the same values then
one can pass in a slightly higher value, eg 168000001 Hz to get 168MHz.
2018-09-24 17:34:05 +10:00
Damien George bc54c57590 stm32/powerctrl: Optimise passing of default values to set_sysclk. 2018-09-24 17:34:05 +10:00
Damien George dae1635c71 stm32/powerctrl: Factor code that configures PLLSAI on F7 MCUs. 2018-09-24 17:34:05 +10:00
Damien George 90ea2c63a5 stm32/powerctrl: Factor code to set RCC PLL and use it in startup.
This ensures that on first boot the most optimal settings are used for the
voltage scaling and flash latency (for F7 MCUs).

This commit also provides more fine-grained control for the flash latency
settings.
2018-09-24 17:34:05 +10:00
Damien George 9e4812771b stm32/powerctrl: Fix configuring APB1/APB2 frequency when AHB also set.
APB1/APB2 are derived from AHB, so if the user sets AHB!=SYSCLK then the
APB1/APB2 dividers must be computed from the new AHB.
2018-09-24 14:51:17 +10:00
Damien George dff14c740b stm32/powerctrl: Move function to set SYSCLK into new powerctrl file.
Power and clock control is low-level functionality and it makes sense to
have it in a dedicated file, at least so it can be reused by other parts of
the code.
2018-09-24 14:18:18 +10:00
Damien George 1acf58c08f stm32/modmachine: Re-enable PLLSAI[1] after waking from stop mode.
On F7s PLLSAI is used as a 48MHz clock source if the main PLL cannot
provide such a frequency, and on L4s PLLSAI1 is always used as a clock
source for the peripherals.  This commit makes sure these PLLs are
re-enabled upon waking from stop mode so the peripherals work.

See issues #4022 and #4178 (L4 specific).
2018-09-24 12:55:15 +10:00
Damien George 4df1943948 stm32/boards/NUCLEO_F091RC: Enable USART3-8 with default pins. 2018-09-21 14:04:33 +10:00
Damien George cdc01408c7 stm32/uart: Add support for USART3-8 on F0 MCUs. 2018-09-21 14:02:54 +10:00
Andrew Leech 84f4d58479 stm32/dcmi: Add F4/F7/H7 hal files and dma definitions for DCMI periph. 2018-09-21 12:12:49 +10:00
Damien George cb3c66e793 stm32/adc: Increase sample time for internal sensors on L4 MCUs.
They need time (around 4us for VREFINT) to obtain accurate results.

Fixes issue #4022.
2018-09-20 23:51:33 +10:00
Damien George 3220cedc31 stm32/adc: Fix ADC calibration scale for L4 MCUs, they use 3.0V. 2018-09-20 23:50:54 +10:00
Damien George 185716514f esp32/machine_rtc: Fix locals dict entry, init qstr points to init meth. 2018-09-20 17:52:16 +10:00
Damien George 56f275c0a2 stm32/Makefile: Include copysign.c in double precision float builds.
This is required for DEBUG=1 builds when MICROPY_FLOAT_IMPL=double.

Thanks to Andrew Leech.
2018-09-20 16:51:20 +10:00
Damien George 6623d7a88c unix/modjni: Get building under coverage and nanbox builds.
Changes made:
- make use of MP_OBJ_TO_PTR and MP_OBJ_FROM_PTR where necessary
- fix shadowing of index variable i, renamed to j
- fix type of above variable to size_t to prevent comparison warning
- fix shadowing of res variable
- use "(void)" instead of "()" for functions that take no arguments
2018-09-20 16:04:08 +10:00
Paul Sokolovsky 11573fcabd unix/modjni: Update .getiter signature to include mp_obj_iter_buf_t* .
And thus be buildable again.
2018-09-20 16:03:53 +10:00
Andrew Leech 17f7c683d2 stm32: Add support for STM32F765xx MCUs.
This part is functionally similar to STM32F767xx (they share a datasheet)
so support is generally comparable.  When adding board support the
stm32f767_af.csv and stm32f767.ld should be used.
2018-09-20 15:16:03 +10:00
Paul Sokolovsky 2da5d41350 py/objstr: Make % (__mod__) formatting operator configurable.
Default is enabled, disabled for minimal builds. Saves 1296 bytes on x86,
976 bytes on ARM.
2018-09-20 14:41:08 +10:00
Damien George a5b583adfd stm32/boards/STM32F769DISC: Add optional support for external SDRAM. 2018-09-20 11:42:03 +10:00
Damien George 9639e0d26f stm32/sdram: Add support for 32-bit wide data bus and 256MB in MPU cfg. 2018-09-20 11:29:37 +10:00
Damien George 7c4f98db85 stm32/dma: Get DMA working on F0 MCUs.
Changes made:
- fix DMA_SUB_INSTANCE_AS_UINT8
- fix dma_id numbers in dma_descr_t
- add F0 DMA IRQ handlers
- set DmaBaseAddress and ChannelIndex when reinit'ing
2018-09-16 23:16:10 +10:00
Siarhei Farbotka e62f59217b esp32: Fix int overflow in machine.sleep/deepsleep functions. 2018-09-14 13:25:45 +10:00
Paul Sokolovsky 064b8e0e8d unix/modos: Include extmod/vfs.h for MP_S_IFDIR, etc.
If DTTOIF() macro is not defined, the code refers to MP_S_IFDIR, etc.
symbols defined in extmod/vfs.h, so should include it.

This fixes build for Android.
2018-09-14 13:22:50 +10:00
Paul Sokolovsky 0bce110872 zephyr/CMakeLists: Update for latest Zephyr CMake usage refactorings.
Added cmake_minimum_required and updated target_link_libraries directives.
2018-09-14 13:21:13 +10:00
Paul Sokolovsky ed1a5bc88e zephyr/prj_base.conf: Update for net_config subsys refactor.
net_config subsystem was split off from net_app, and as a result, settings
need renaming from CONFIG_NET_APP_* to CONFIG_NET_CONFIG_*.
2018-09-14 13:21:13 +10:00
Damien George 9fb1f18cf4 stm32/sdcard: Fully reset SDMMC periph before calling HAL DMA functions.
The HAL DMA functions enable SDMMC interrupts before fully resetting the
peripheral, and this can lead to a DTIMEOUT IRQ during the initialisation
of the DMA transfer, which then clears out the DMA state and leads to the
read/write not working at all.  The DTIMEOUT is there from previous SDMMC
DMA transfers, even those that succeeded, and is of duration ~180 seconds,
which is 0xffffffff / 24MHz (default DTIMER value, and clock of
peripheral).

To work around this issue, fully reset the SDMMC peripheral before calling
the HAL SD DMA functions.

Fixes issue #4110.
2018-09-12 17:02:17 +10:00
Damien George e6a6ded74e unix/mpconfigport_coverage.h: Enable uhashlib.md5. 2018-09-12 16:09:41 +10:00
Damien George 6b3d6da74b stm32/flashbdev: Protect flash writes from cache flushing and USB MSC. 2018-09-12 15:58:42 +10:00
Damien George 0941a467e7 stm32: Change flash IRQ priority from 2 to 6 to prevent preemption.
The flash-IRQ handler is used to flush the storage cache, ie write
outstanding block data from RAM to flash.  This is triggered by a timeout,
or by a direct call to flush all storage caches.

Prior to this commit, a timeout could trigger the cache flushing to occur
during the execution of a read/write to external SPI flash storage.  In
such a case the storage subsystem would break down.

SPI storage transfers are already protected against USB IRQs, so by
changing the priority of the flash IRQ to that of the USB IRQ (what is
done in this commit) the SPI transfers can be protected against any
timeouts triggering a cache flush (the cache flush would be postponed until
after the transfer finished, but note that in the case of SPI writes the
timeout is rescheduled after the transfer finishes).

The handling of internal flash sync'ing needs to be changed to directly
call flash_bdev_irq_handler() sync may be called with the IRQ priority
already raised (eg when called from a USB MSC IRQ handler).
2018-09-12 15:46:04 +10:00
Damien George 6f015d337d stm32/spi: Be sure to set all SPI config values in SPI proto init. 2018-09-11 17:36:11 +10:00
Damien George c26516d40f stm32/sdcard: Move temporary DMA state from BSS to stack. 2018-09-11 17:23:27 +10:00
Damien George e4f7001d9c stm32/sdcard: Use only a single DMA stream for both SDIO TX/RX.
No need to be wasteful on DMA resources.
2018-09-11 17:21:22 +10:00
Damien George d7e2ac4a6a stm32/dma: Reinitialise the DMA if the direction changed on the channel. 2018-09-11 17:19:55 +10:00
Damien George b0c8a94b41 stm32/dma: Pass DMA direction as parameter to dma_init not in cfg struct
Some DMA channels (eg for SDIO) can be used in both directions and this
patch allows such peripherals to dynamically select the DMA direction.
2018-09-11 17:18:06 +10:00
Damien George 47550ef2cd stm32: For MCUs that have PLLSAI allow to set SYSCLK at 2MHz increments.
MCUs that have a PLLSAI can use it to generate a 48MHz clock for USB, SDIO
and RNG peripherals.  In such cases the SYSCLK is not restricted to values
that allow the system PLL to generate 48MHz, but can be any frequency.
This patch allows such configurability for F7 MCUs, allowing the SYSCLK to
be set in 2MHz increments via machine.freq().  PLLSAI will only be enabled
if needed, and consumes about 1mA extra.  This fine grained control of
frequency is useful to get accurate SPI baudrates, for example.
2018-09-11 16:42:57 +10:00
roland 67ee4e2401 stm32/boards/STM32L476DISC: Enable external RTC xtal to get RTC working. 2018-09-11 15:23:19 +10:00
Andrew Leech 670a2a3396 stm32/Makefile: Allow external BOARD_DIR directory to be specified.
This makes it easy to add a custom board definition outside of the
micropython tree, keeping the micropython submodule clean and official.
2018-09-11 15:15:21 +10:00
Paul Sokolovsky 5615273bb0 unix/Makefile: Build libffi inside $BUILD.
Avoids polluting the source tree, allows to build for different (sub)archs
without intermediate cleaning.
2018-09-10 11:34:46 +03:00
Damien George 5cd2c7f2e7 esp8266/main: Increase heap by 2kb, now that axtls rodata is in ROM. 2018-09-08 00:09:03 +10:00
Damien George eed83caf1d esp8266/Makefile: Remove build of libaxtls.a and add back tuned config. 2018-09-08 00:07:23 +10:00
Damien George 6ad5355e43 unix/Makefile: Remove building of libaxtls.a which is no longer needed. 2018-09-08 00:07:23 +10:00
Damien George a23719e0ad stm32/mboot/main: Use correct formula for DFU download address.
As per ST's DfuSe specification, and following their example code.
2018-09-05 15:22:05 +10:00
Damien George 5f3016c663 stm32/mboot/Makefile: Use -Wno-attributes for ll_usb.c HAL source file.
A recent version of arm-none-eabi-gcc (8.2.0) will warn about unused packed
attributes in USB_WritePacket and USB_ReadPacket.  This patch suppresses
such warnings for this file only.
2018-09-05 15:21:43 +10:00
Damien George 056e0b6293 stm32/spi: Add implementation of low-level SPI protocol.
Can be used, for example, to configure external SPI flash using a hardware
SPI interface (code to be put in a board's bdev.c file):

    STATIC const spi_proto_cfg_t hard_spi_bus = {
        .spi = &spi_obj[5],
        .baudrate = 10000000,
        .polarity = 0,
        .phase = 0,
        .bits = 8,
        .firstbit = SPI_FIRSTBIT_MSB,
    };

    STATIC mp_spiflash_cache_t spi_bdev_cache;

    const mp_spiflash_config_t spiflash_config = {
        .bus_kind = MP_SPIFLASH_BUS_SPI,
        .bus.u_spi.cs = pin_A0,
        .bus.u_spi.data = (void*)&hard_spi_bus,
        .bus.u_spi.proto = &spi_proto,
        .cache = &spi_bdev_cache,
    };

    spi_bdev_t spi_bdev;
2018-08-14 22:10:43 +10:00
Damien George 01ce2e1682 unix/Makefile: Enable ussl module with nanbox build. 2018-08-14 21:53:06 +10:00
Damien George 8300be6d0f stm32/spi: Split out pyb.SPI and machine.SPI bindings to their own files
The aim here is to have spi.c contain the low-level SPI driver which is
independent (not fully but close) of MicroPython objects and methods, and
the higher-level bindings are separated out to pyb_spi.c and machine_spi.c.
2018-08-14 17:11:07 +10:00
Damien George 48d736f491 esp32: Update to latest ESP IDF.
Among other things, this requires putting bootloader object files in to
their relevant .a archive, so that they can be correctly referenced by the
ESP IDF's linker script.
2018-08-14 16:45:37 +10:00
forester3 02fbb0a455 stm32/boards/STM32F7DISC: Enable onboard SDRAM.
The default SYSCLK frequency is reduced to 192MHz because SDRAM requires it
to be 200MHz or less.
2018-08-14 16:04:10 +10:00
forester3 502c410214 stm32/boards/STM32F429DISC: Add burst len and autorefresh to SDRAM cfg.
To align with recent changes to sdram.c.
2018-08-14 16:03:13 +10:00
forester3 e562f99263 stm32/sdram: Allow additional config by a board, and tune MPU settings.
- Allow configuration by a board of autorefresh number and burst length.
- Increase MPU region size to 8MiB.
- Make SDRAM region cacheable and executable.
2018-08-14 16:00:14 +10:00
Paul Sokolovsky fe1ef507ef unix/Makefile: coverage: Explicitly build "axtls" too.
"coverage" build uses different BUILD directory comparing to the normal
build. Previously, any build picked up libaxtls.a from normal build's
directory, but that was fixed recently. So, for each build, we must
build axtls explicitly.

This fixes Travis build in particular.
2018-08-14 15:10:52 +10:00
stijn 3f9d3e120b windows/msvc: Support custom compiler for header generation.
Use overrideable properties instead of hardcoding the use of the
default cl executable used by msvc toolsets. This allows using
arbitrary compiler commands for qstr header generation.
The CLToolExe and CLToolPath properties are used because they are,
even though absent from any official documentation, the de-facto
standard as used by the msvc toolsets themselves.
2018-08-14 15:07:19 +10:00
Damien George 86e0b25532 stm32/spi: Round up prescaler calc to never exceed requested baudrate.
Requesting a baudrate of X should never configure the peripheral to have a
baudrate greater than X because connected hardware may not be able to
handle higher speeds.  This patch makes sure to round the prescaler up so
that the actual baudrate is rounded down.
2018-08-10 16:39:47 +10:00
David Lechner 3fccd78aca stm32/dma: Fix spelling of "corresponding" in two locations. 2018-08-10 16:26:25 +10:00
Damien George 7be5bb3672 stm32/adc: Fix ADC reading on F0 MCUs to only sample a single channel.
And increase sampling time to get better results for internal channels.
2018-08-04 13:33:02 +10:00
Damien George c62b23094f stm32/adc: Disable VBAT in read channel helper function.
Prior to this patch, if VBAT was read via ADC.read() or
ADCAll.read_channel(), then it would remain enabled and subsequent reads
of TEMPSENSOR or VREFINT would not work.  This patch makes sure that VBAT
is disabled for all cases that it could be read.
2018-08-04 13:25:43 +10:00
Ayke van Laethem e755bd4932
nrf/uart: Fix UART.writechar() to write just 1 byte. 2018-08-02 22:21:24 +02:00
Ayke van Laethem 60a05485cb
nrf/uart: Remove unused UART.char_width field.
Also, clean up some code.
Code size change:
nrf51: -24
nrf52: -28
2018-08-02 22:18:16 +02:00
Stig Bjørlykke 2cf2ad943e nrf: Use separate config for each PWM instance.
The hard_configs table has entries for each PWM instance. Use them.
2018-08-02 20:36:18 +02:00
Damien George da2d2b6d88 py/mpconfig.h: Introduce MICROPY_DEBUG_PRINTER for debugging output.
This patch in effect renames MICROPY_DEBUG_PRINTER_DEST to
MICROPY_DEBUG_PRINTER, moving its default definition from
lib/utils/printf.c to py/mpconfig.h to make it official and documented, and
makes this macro a pointer rather than the actual mp_print_t struct.  This
is done to get consistency with MICROPY_ERROR_PRINTER, and provide this
macro for use outside just lib/utils/printf.c.

Ports are updated to use the new macro name.
2018-08-02 14:04:44 +10:00