Commit Graph

10648 Commits

Author SHA1 Message Date
Jim Mussared 4ddd46e6cf docs/develop/qstr.rst: Add documentation for string interning. 2019-10-04 17:13:13 +10:00
Petr Viktorin 25a9bccdee py/compile: Disallow 'import *' outside module level.
This check follows CPython's behaviour, because 'import *' always populates
the globals with the imported names, not locals.

Since it's safe to do this (doesn't lead to a crash or undefined behaviour)
the check is only enabled for MICROPY_CPYTHON_COMPAT.

Fixes issue #5121.
2019-10-04 16:46:47 +10:00
Damien George 26e90a0514 stm32/boards: Enable MICROPY_HW_RTC_USE_LSE on L4 boards.
The previous commit changed the default configuration on L4 MCUs to use
LSI, so configure these boards to use LSE again.
2019-10-04 16:10:13 +10:00
hahmadi 266146ad64 stm32/system_stm32: Support selection of HSE and LSI on L4 MCUs.
This commit adds the option to use HSE or MSI system clock, and LSE or LSI
RTC clock, on L4 MCUs.

Note that prior to this commit the default clocks on an L4 part were MSI
and LSE.  The defaults are now MSI and LSI.

In mpconfigboard.h select the clock source via:

    #define MICROPY_HW_RTC_USE_LSE (0) or (1)
    #define MICROPY_HW_CLK_USE_HSE (0) or (1)

and the PLLSAI1 N,P,Q,R settings:

    #define MICROPY_HW_CLK_PLLSAIN (12)
    #define MICROPY_HW_CLK_PLLSAIP (RCC_PLLP_DIV7)
    #define MICROPY_HW_CLK_PLLSAIQ (RCC_PLLQ_DIV2)
    #define MICROPY_HW_CLK_PLLSAIR (RCC_PLLR_DIV2)
2019-10-04 16:09:06 +10:00
roland van straten a069340c1e nrf/main: Update the way the LED is used on startup.
In case of LED1 being present, do a short blink during startup
instead of turning it on and leave it on.
2019-10-02 22:17:54 +02:00
roland van straten 226399bcef nrf/led: Expose public API for LED manipulation.
Aligned implementation with the STM32 port.
Added empty functions to be used when no LED is available.
2019-10-02 22:09:43 +02:00
Glenn Ruben Bakke cf383412ef nrf/flash: Update flash driver to use nrfx_nvmc driver.
The the nrfx driver is aware of chip specific registers, while
the raw HAL abstraction is not. This driver enables use of NVMC
in non-secure domain for nrf9160.
2019-10-02 21:28:34 +02:00
Glenn Ruben Bakke c561ae61a1 nrf/uart: Add support for UARTE (EasyDMA). 2019-10-02 21:20:56 +02:00
Glenn Ruben Bakke 02a8c31eef nrf/temp: Move module configuration guard.
This patch moves the check for MICROPY_PY_MACHINE_TEMP to come
before the inclusion of nrf_temp.h. The nrf_temp.h depends on
the NRF_TEMP_Type which might not be defined for all nRF devices.
2019-10-02 21:15:48 +02:00
Glenn Ruben Bakke d2e730b727 nrf/i2c: Add support for TWIM (EasyDMA). 2019-10-02 20:42:06 +02:00
Damien George 4102320e90 tests/basics: Add test for getting name of func with closed over locals.
Tests correct decoding of the prelude to get the function name.
2019-10-01 12:26:22 +10:00
Damien George 1d0423419b py/bc: Don't include mp_decode_uint funcs when not needed.
These are now only needed when persistent code is disabled.
2019-10-01 12:26:22 +10:00
Damien George fd9b7efe39 minimal/frozentest.mpy: Update due to change in bytecode. 2019-10-01 12:26:22 +10:00
Damien George c8c0fd4ca3 py: Rework and compress second part of bytecode prelude.
This patch compresses the second part of the bytecode prelude which
contains the source file name, function name, source-line-number mapping
and cell closure information.  This part of the prelude now begins with a
single varible length unsigned integer which encodes 2 numbers, being the
byte-size of the following 2 sections in the header: the "source info
section" and the "closure section".  After decoding this variable unsigned
integer it's possible to skip over one or both of these sections very
easily.

This scheme saves about 2 bytes for most functions compared to the original
format: one in the case that there are no closure cells, and one because
padding was eliminated.
2019-10-01 12:26:22 +10:00
Damien George b5ebfadbd6 py: Compress first part of bytecode prelude.
The start of the bytecode prelude contains 6 numbers telling the amount of
stack needed for the Python values and exceptions, and the signature of the
function.  Prior to this patch these numbers were all encoded one after the
other (2x variable unsigned integers, then 4x bytes), but using so many
bytes is unnecessary.

An entropy analysis of around 150,000 bytecode functions from the CPython
standard library showed that the optimal Shannon coding would need about
7.1 bits on average to encode these 6 numbers, compared to the existing 48
bits.

This patch attempts to get close to this optimal value by packing the 6
numbers into a single, varible-length unsigned integer via bit-wise
interleaving.  The interleaving scheme is chosen to minimise the average
number of bytes needed, and at the same time keep the scheme simple enough
so it can be implemented without too much overhead in code size or speed.
The scheme requires about 10.5 bits on average to store the 6 numbers.

As a result most functions which originally took 6 bytes to encode these 6
numbers now need only 1 byte (in 80% of cases).
2019-10-01 12:26:22 +10:00
Damien George 81d04a0200 py: Add n_state to mp_code_state_t struct.
This value is used often enough that it is better to cache it instead of
decode it each time.
2019-10-01 12:26:22 +10:00
Damien George 4c5e1a0368 py/bc: Change mp_code_state_t.exc_sp to exc_sp_idx.
Change from a pointer to an index, to make space in mp_code_state_t.
2019-10-01 12:26:22 +10:00
Damien George 1d7afcce49 py/bc: Remove comments referring to obsolete currently_in_except_block.
It was made obsolete in 6f9e3ff719
2019-10-01 12:26:22 +10:00
Jim Mussared fafa9d35dd stm32/boards/PYBD: Enable BLE for Pyboard D. 2019-10-01 09:51:02 +10:00
Jim Mussared 6f35f214d3 stm32/mpconfigport.h: Add modbluetooth module to stm32. 2019-10-01 09:51:02 +10:00
Andrew Leech eb1b6858a2 extmod/modbluetooth: Allow MP_BLUETOOTH_MAX_ATTR_SIZE in board config. 2019-10-01 09:51:02 +10:00
Andrew Leech 5dc592d117 extmod/modbluetooth_nimble: Use random addr if public isn't available. 2019-10-01 09:51:02 +10:00
Jim Mussared 497dae45e7 extmod/modbluetooth_nimble: Implement modbluetooth API with Nimble. 2019-10-01 09:51:02 +10:00
Jim Mussared 16f8ceeaaa extmod/modbluetooth: Add low-level Python BLE API. 2019-10-01 09:51:02 +10:00
Jim Mussared f67fd95f8d unix/coverage: Add coverage tests for ringbuf. 2019-10-01 09:51:02 +10:00
Jim Mussared 42e9bdf19b py/ringbuf: Add helpers for put16/get16. 2019-10-01 09:51:02 +10:00
Jim Mussared d72dbb822c stm32: Provide port-specific implementation for Nimble on STM32. 2019-10-01 09:51:02 +10:00
Damien George 07f6644a38 extmod/nimble: Add nimble bindings. 2019-10-01 09:51:02 +10:00
Damien George 21507a6f62 lib/mynewt-nimble: Add Apache mynewt nimble as a submodule.
Tag nimble_1_1_0_tag.
2019-10-01 09:51:02 +10:00
Damien George 7418dbf12d drivers/cyw43: Add low-level CYW43xx Bluetooth HCI UART driver. 2019-10-01 09:50:48 +10:00
Andrew Leech 4ba0aff472 stm32/uart: Add RTS/CTS pin configuration support to UART4. 2019-09-27 13:24:01 +10:00
Chris Mason eb12fa3862 stm32/powerctrlboot: Add support for HSI at 8MHz on F0 MCUs.
For use with F0 MCUs that don't have HSI48.  Select the clock source
explicitly in mpconfigboard.h.

On the NUCLEO_F091RC board use HSE bypass when HSE is chosen because the
NUCLEO clock source is STLINK not a crystal.
2019-09-26 17:34:04 +10:00
Chris Mason f16e4be3fa stm32/powerctrlboot: Fix clock and PLL selection for HSI48 on F0 MCUs.
Before this patch the UART baudrate on F0 MCUs was wrong because the
stm32lib SystemCoreClockUpdate sets SystemCoreClock to 8MHz instead of
48MHz if HSI48 is routed directly to SYSCLK.

The workaround is to use HSI48 -> PREDIV (/2) -> PLL (*2) -> SYSCLK.

Fixes issue #5049.
2019-09-26 17:32:22 +10:00
Damien George 3328b7d71f stm32: Support disabling the compiler.
Disable via "#define MICROPY_ENABLE_COMPILER (0)" in the board's
mpconfigboard.h file.
2019-09-26 17:05:40 +10:00
Damien George 095f90f04e tests/micropython: Add test for native generators. 2019-09-26 16:53:47 +10:00
Damien George 6647d03e42 travis: Build more stm32 boards to cover all supported MCUs. 2019-09-26 16:43:34 +10:00
Damien George 9abfe85ace minimal/frozentest: Recompile now that mpy version has changed. 2019-09-26 16:40:54 +10:00
Damien George 5716c5cf65 py/persistentcode: Bump .mpy version to 5.
The bytecode opcodes have changed (there are more, and they have been
reordered).
2019-09-26 16:39:37 +10:00
Damien George 96f2a38075 py/nativeglue: Make mp_fun_table fixed size regardless of config.
So that mpy files with native code will always work correctly, and raise an
exception if a feature is used that is not supported by the runtime.
2019-09-26 16:24:06 +10:00
Josh Lloyd 7d58a197cf py: Rename MP_QSTR_NULL to MP_QSTRnull to avoid intern collisions.
Fixes #5140.
2019-09-26 16:04:56 +10:00
Damien George b596638b9b mpy-cross: Set number of registers in nlr_buf_t based on native arch.
Fixes #5059.  Done in collaboration with Jim Mussared.
2019-09-26 15:53:05 +10:00
Damien George 74503107a7 py/emitnative: Factor sizeof/offsetof calculations to macros. 2019-09-26 15:52:19 +10:00
Damien George a48cdb57b2 py/nlr.h: Factor out constants to specific macros. 2019-09-26 15:52:19 +10:00
Damien George 02db91a7a3 py: Split RAISE_VARARGS opcode into 3 separate ones.
From the beginning of this project the RAISE_VARARGS opcode was named and
implemented following CPython, where it has an argument (to the opcode)
counting how many args the raise takes:

    raise # 0 args (re-raise previous exception)
    raise exc # 1 arg
    raise exc from exc2 # 2 args (chained raise)

In the bytecode this operation therefore takes 2 bytes, one for
RAISE_VARARGS and one for the number of args.

This patch splits this opcode into 3, where each is now a single byte.
This reduces bytecode size by 1 byte for each use of raise.  Every byte
counts!  It also has the benefit of reducing code size (on all ports except
nanbox).
2019-09-26 15:39:50 +10:00
Damien George 870e900d02 py: Introduce and use constants for multi-opcode sizes. 2019-09-26 15:27:11 +10:00
Damien George 1f7202d122 py/bc: Replace big opcode format table with simple macro. 2019-09-26 15:27:11 +10:00
Damien George 67fdfebe64 tests: Update tests for changes to opcode ordering. 2019-09-26 15:27:11 +10:00
Damien George 5889cf58db py/bc0: Order opcodes into groups based on their size and format. 2019-09-26 15:27:10 +10:00
Damien George fe4e1fe4b9 tests/basics: Add test for matmul operator.
This is a Python 3.5 feature so the .exp file is needed.
2019-09-26 15:15:34 +10:00
Damien George 2069c563f9 py: Add support for matmul operator @ as per PEP 465.
To make progress towards MicroPython supporting Python 3.5, adding the
matmul operator is important because it's a really "low level" part of the
language, being a new token and modifications to the grammar.

It doesn't make sense to make it configurable because 1) it would make the
grammar and lexer complicated/messy; 2) no other operators are
configurable; 3) it's not a feature that can be "dynamically plugged in"
via an import.

And matmul can be useful as a general purpose user-defined operator, it
doesn't have to be just for numpy use.

Based on work done by Jim Mussared.
2019-09-26 15:12:39 +10:00