Configuring clocks is a critical operation and is best to avoid when
possible. If the clocks really need to be reset to the same values then
one can pass in a slightly higher value, eg 168000001 Hz to get 168MHz.
This ensures that on first boot the most optimal settings are used for the
voltage scaling and flash latency (for F7 MCUs).
This commit also provides more fine-grained control for the flash latency
settings.
Power and clock control is low-level functionality and it makes sense to
have it in a dedicated file, at least so it can be reused by other parts of
the code.
On F7s PLLSAI is used as a 48MHz clock source if the main PLL cannot
provide such a frequency, and on L4s PLLSAI1 is always used as a clock
source for the peripherals. This commit makes sure these PLLs are
re-enabled upon waking from stop mode so the peripherals work.
See issues #4022 and #4178 (L4 specific).
There appears to be an issue on Windows with CPython >= 3.6,
sys.stdout.flush() raises an exception:
OSError: [WinError 87] The parameter is incorrect
It works fine to just catch and ignore the error on the flush line. Tested
on Windows 10 x64 1803 (Build 17134.228), Python 3.6.4 amd64.
This patches avoids multiplying with negative powers-of-10 when parsing
floating-point values, when those powers-of-10 can be exactly represented
as a positive power. When represented as a positive power and used to
divide, the resulting float will not have any rounding errors.
The issue is that mp_parse_num_decimal will sometimes not give the closest
floating representation of the input string. Eg for "0.3", which can't be
represented exactly in floating point, mp_parse_num_decimal gives a
slightly high (by 1LSB) result. This is because it computes the answer as
3 * 0.1, and since 0.1 also can't be represented exactly, multiplying by 3
multiplies up the rounding error in the 0.1. Computing it as 3 / 10, as
now done by the change in this commit, gives an answer which is as close to
the true value of "0.3" as possible.
Changes made:
- make use of MP_OBJ_TO_PTR and MP_OBJ_FROM_PTR where necessary
- fix shadowing of index variable i, renamed to j
- fix type of above variable to size_t to prevent comparison warning
- fix shadowing of res variable
- use "(void)" instead of "()" for functions that take no arguments
This commit implements PEP479 which disallows raising StopIteration inside
a generator to signal that it should be finished. Instead, the generator
should simply return when it is complete.
See https://www.python.org/dev/peps/pep-0479/ for details.
This part is functionally similar to STM32F767xx (they share a datasheet)
so support is generally comparable. When adding board support the
stm32f767_af.csv and stm32f767.ld should be used.
In 0e80f345f8 the inplace operations __iadd__
and __isub__ were made unconditionally available, so the comment about this
section is changed to reflect that.
Loading a pointer by indexing into the native function table mp_fun_table,
rather than loading an immediate value (via a PC-relative load), uses less
code space.
This commit makes viper functions have the same signature as native
functions, at the level of the emitter/assembler. This means that viper
functions can now be wrapped in the same uPy object as native functions.
Viper functions are now responsible for parsing their arguments (before it
was done by the runtime), and this makes calling them more efficient (in
most cases) because the viper entry code can be custom generated to suit
the signature of the function.
This change also opens the way forward for viper functions to take
arbitrary numbers of arguments, and for them to handle globals correctly,
among other things.
Now that the compiler can store the results of the viper types in the
scope, the viper parameter annotation compilation stage can be merged with
the normal parameter compilation stage.
Damien George
Andrew Leech
Romain Goyet
Peter Hinch
Paul Sokolovsky