ed56b0baba
cc3200: Finally unlock the full wake on WLAN feature set.
2015-05-22 19:53:33 +02:00
18030bd85d
cc3200: Add own ubinascii module.
...
The reason to have our owm ubinascii module is so that later we
can add crc32 support using the hardware engine.
2015-05-22 09:56:11 +02:00
7506db4ccb
cc3200: Remove uhashlib.hexdigest().
2015-05-21 18:51:57 +02:00
e800db562f
cc3200: Add uhashlib. Supports SHA1 and SHA256.
2015-05-20 11:44:24 +02:00
5e38b48dd6
cc3200: Fix time.localtime() so that it returns the correct fields.
2015-05-20 11:44:22 +02:00
56053c37cf
cc3200: Rewrite WLAN.ifconfig(). Add WLAN.info() and WLAN.connections().
2015-05-20 11:44:21 +02:00
6f848b6dba
cc3200: Set the timer edge count interrupt value in the calbback const.
2015-05-17 16:11:12 +02:00
95a4f61499
cc3200: Make sure RTC wake value is >= 1ms.
2015-05-17 16:09:27 +02:00
c27dc38e85
cc3200: Re-name 'intmode' to 'mode' in the callback API.
2015-05-17 14:49:17 +02:00
cd3f2523f1
cc3200: Disable WLAN.urn() by default.
...
Can be enabled by defining MICROPY_PORT_WLAN_URN=1 in mpconfigport.h.
2015-05-17 14:20:24 +02:00
a379b6ed11
cc3200: Add optional timeout param to WLAN.connect().
2015-05-17 14:05:44 +02:00
fb9e4cf463
cc3200: Make sure to handle all pending pin interrupts.
...
When entering the interrupt handler of a given GPIO port, more than
one pin could have pending interrupts, therefore care must be taken
to service each interrupt one by one before leaving.
2015-05-17 13:42:15 +02:00
8e611e8414
cc3200: Add Timer module. Supports free running, PWM and capture modes.
2015-05-17 12:34:49 +02:00
9466e154b4
cc3200: Fix power mode param check in the UART callback constructor.
2015-05-17 12:26:40 +02:00
2b62707051
cc3200: Add os.rename()
2015-05-17 12:22:17 +02:00
1db4253886
lib: Move time utility functions to common library.
2015-05-13 00:12:54 +01:00
c50772d19f
py: Add mp_obj_get_int_truncated and use it where appropriate.
...
mp_obj_get_int_truncated will raise a TypeError if the argument is not
an integral type. Use mp_obj_int_get_truncated only when you know the
argument is a small or big int.
2015-05-12 23:05:53 +01:00
04ee5983fe
lib: Move some common mod_network_* functions to lib/netutils.
2015-05-04 11:48:40 +01:00
8c8d7f3c60
cc3200: Clean up pyb.Pin
...
Remove unused and unneeded functions, also create Pin.get_config() that
returns the whole configuration of the pin.
This reduces code size by ~500 bytes.
2015-05-03 11:26:56 +02:00
e4c899a08c
cc3200: WLAN.ifconfig returns an attrtuple instead of a dictionary.
2015-05-03 11:26:25 +02:00
f54bdecff2
cc3200: Implement Sleep.wake_reason()
2015-05-03 11:21:14 +02:00
71d482df47
cc3200: Clear the pending interrupt flag when disabling RTC callbacks.
2015-05-03 11:21:12 +02:00
6f218d7472
cc3200: Move wlan_init0() to the boot section.
...
This one creates a semaphore, therefore it must be executed only
after a hard reset (or when coming out of hibernation).
2015-04-29 16:10:40 +02:00
d8713d78f5
cc3200: Correct Sleep module name. Must be 'Sleep', not 'sleep'.
2015-04-29 15:27:28 +02:00
dbb4aef5e3
cc3200: Make WLAN.isconnected() also work in AP mode.
...
While in STA mode isconnected() returns True when connected to an AP
and the IP has been acquired. In AP mode, WLAN.isconnected() returns
True if at least one connected station is present.
2015-04-29 15:26:21 +02:00
95f53461c2
py: Replace py-version.sh with makeversionhdr.py, written in Python.
...
Also rename py-version.h to mpversion.h for consistency with mpconfig.h.
2015-04-28 23:52:36 +01:00
d11317bcab
cc3200: Make WLAN scan results a list of attrtupple.
...
Each result is displayed like this:
ssid='MySSID', bssid=b'\xc0J\x00z.\xcc', security=2, channel=None, rssi=-74
The CC3200 doesn't provide channel info, that why is 'None'.
2015-04-29 00:04:01 +02:00
f81684141e
cc3200: Implement os.uname() to get details of the OS and hardware.
2015-04-29 00:03:56 +02:00
d34c4784a5
cc3200: Select NIC when the socket is created.
...
This makes sense since only WLAN is supported here.
2015-04-28 15:14:36 +02:00
7c8b4c1a8b
cc3200: Correct MAKE_SOCKADDR and UNPACK_SOCKADDR byte order.
2015-04-25 23:36:45 +02:00
259eaab9a9
cc3200: Clean up and reduce use/include of std.h.
2015-04-18 14:29:28 +01:00
c1a77a0c9f
cc3200: Use new %q format to print qstr's where appropiate.
2015-04-17 10:15:55 +02:00
7f9d1d6ab9
py: Overhaul and simplify printf/pfenv mechanism.
...
Previous to this patch the printing mechanism was a bit of a tangled
mess. This patch attempts to consolidate printing into one interface.
All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf. All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.
Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform. The former is only used when MICROPY_PY_IO is defined.
With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...). Code size is also reduced by around 200 bytes on
Thumb2 archs.
2015-04-16 14:30:16 +00:00
f7a26472af
cc3200: Add IPPROTO_SEC to be able to create secure sockets.
2015-04-14 01:57:27 +02:00
c69b4310c8
cc3200: Add WLAN.config_ip().
...
This new method allows to assign an static IP to the device.
2015-04-13 00:02:56 +02:00
6e25d955f4
cc3200: Enable long filename support in FatFS.
...
This has implications all over the place. I have to admit that
you can instantly see that usability improves, but it costs 3K.
At the same time I took the oportunity to rename the '/SFLASH'
drive to '/flash' which improves compatibility with the pyboard.
2015-04-11 13:35:05 +02:00
d460a30711
cc3200: Add specific version file for the CC3200 port.
...
Current version has been numbered as 0.9.0 since Timers/PWM support
is still missing.
2015-03-31 14:34:09 +02:00
3f42f32648
cc3200: Remove duplicated code from moduos.
...
Error reporting is also changed from detailed to terse, as with the
rest of the CC3200's modules. All this combined saves ~200 bytes.
2015-03-31 14:34:07 +02:00
760a6eca9b
cc3200: Minor refactorings on modwlan and pybsleep.
2015-03-26 14:27:21 +01:00
4be44014ab
cc3200: Reenable active interrupts when waking from suspended mode.
2015-03-26 13:58:58 +01:00
2d717ad97a
cc3200: Add callback support to the UART for RX interrupts.
2015-03-26 10:28:43 +01:00
e909e38871
cc3200: Remove superflous parameters from the SPI API.
2015-03-26 10:28:41 +01:00
7f41f650de
cc3200: Remove superflous params from the I2C API.
2015-03-25 16:56:14 +01:00
26d230419c
cc3200: Add GPIO25 to the pins list of the WiPy and the WiPy-SD.
...
This allows to properly initialize the system led and add it
to the sleep module so that it can be restored when resuming
from suspended mode.
2015-03-25 15:22:32 +01:00
684dba40f0
cc3200: Roll back to the previous telnet and ftp timeouts.
...
Unfortunately, these timeouts are the only realiable way (for now), to
be able to detect broken connections due to half-open sockets. Such a
thing occurs when getting out of the WiFi coverage area or when
disconnecting from the AP (sometimes the client doesn't send the
disconnect packet).
2015-03-25 15:22:21 +01:00
e15f8198bc
cc3200: Keep WLAN enabled during the soft reset.
2015-03-25 15:22:16 +01:00
104a867447
cc3200: Fix bug in telnet that caused the rx buffer to overflow.
2015-03-22 11:32:12 +01:00
59f6831336
cc3200: Reduce soft reset time. WLAN is not reinit, just reenabled.
2015-03-21 11:31:29 +01:00
77791b5633
cc3200: Improve usability and robustness of the servers.
2015-03-21 11:31:17 +01:00
c1c23e2f6a
cc3200: Remove superfluous code in pybsleep.
2015-03-21 11:27:26 +01:00
cd9bc14c8f
cc3200: Add SPI module.
...
Only MASTER mode is supported. Transfer width is configurable to
8, 16 or 32 bits.
2015-03-21 11:26:47 +01:00
c45e641c1d
cc3200: Re-name pybsystick to mpsystick.
2015-03-21 11:21:45 +01:00
f8ee88bbe0
cc3200: Move server methods from WLAN to the network module.
2015-03-19 17:08:25 +01:00
0e96d1b3f1
cc3200: Add parameter to wlan_stop() for custom timeout values.
2015-03-18 21:55:08 +01:00
f382f4442e
cc3200: Fixes and improvements to the SD card driver.
2015-03-18 21:55:02 +01:00
963d7c7ee6
cc3200: Refactor I2C. Remove all references to SLAVE mode.
2015-03-18 21:54:41 +01:00
d3912549a3
cc3200: Improve I2C timeout handling.
2015-03-18 21:54:30 +01:00
005a7f4190
cc3200: Fix extint_enable behaviour when the callback is updated.
2015-03-17 13:26:09 +01:00
181fe5016c
cc3200: Add RTC callback with wake-up from sleep capability.
2015-03-17 13:26:08 +01:00
6de1b39368
cc3200: Make peripheral objects static.
...
This prevents duplication of objects in the sleep list. Also helps
with reducing the code size by ~100 bytes.
2015-03-17 13:26:07 +01:00
fcf6db0695
cc3200: Register pybsd with the sleep module and use pin_config().
2015-03-17 13:26:06 +01:00
98b8568362
cc3200: Assign GPIO10 and GPIO11 to the GPIO peripheral on start-up.
2015-03-17 13:26:05 +01:00
ea43fa104e
cc3200: Remove unneeded functions and add pybsleep_remove() calls.
2015-03-17 13:26:03 +01:00
78d7c45b69
cc3200: Disable all wake sources on start-up.
2015-03-16 00:42:16 +01:00
ed20ac56f7
cc3200: Fix bug in RTC msec register access functions.
2015-03-16 00:42:15 +01:00
0962358026
cc3200: Align SD card driver with new SDK release(1.1.0).
2015-03-16 00:42:13 +01:00
1080802e8f
cc3200: Update socket event handler to align with new SDK(1.1.0) API.
2015-03-16 00:42:11 +01:00
b2cb75efb7
cc3200: Remove double administration of callback objects.
2015-03-16 00:42:09 +01:00
0d0646d915
cc3200: Update HAL to SDK release version 1.1.0.
2015-03-16 00:42:05 +01:00
2c103d5200
cc3200: Rewrite the PRCM RTC functionality methods.
...
This allows to use the On-Chip retention registers for both the
RTC and to share notification flags between the bootloader and the
application. The two flags being shared right now are the "safe boot"
request and the WDT reset cause. we still have 2 more bits free for
future use.
2015-03-14 10:08:47 +01:00
c7fabe1f3e
cc3200: Remove unneeded code from modwlan and optimize startup time.
...
These changes also help reduce the hibernate wake-up time to 1s.
2015-03-14 10:08:43 +01:00
04749e677f
cc3200: Allow separate selection of the power mode in Pin callbacks.
2015-03-12 16:22:17 +01:00
10f7ef0832
cc3200: Keep WLAN enabled during suspend mode.
2015-03-12 16:22:16 +01:00
6ae9383f63
cc3200: Remove WLAN.getmode since it's superseded by WLAN.ifconfig.
2015-03-12 16:22:13 +01:00
37337427c3
cc3200: Trigger a new network scan when WLAN.scan() is called.
2015-03-12 16:22:12 +01:00
b761ed2103
cc3200: Register ADC and I2C with the sleep module.
2015-03-11 22:09:52 +01:00
e9786f40f5
cc3200: Disable WLAN in suspended mode if NW wake is not enabled.
2015-03-11 17:11:10 +01:00
9e44383e3f
cc3200: Add power management framework. Add mpcallback class.
...
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
73aee8da54
cc3200: Merge ExtInt class into Pin class.
...
Also add another method to change the pin's interrupt mode
on the fly.
2015-03-11 17:00:28 +01:00
26cbc91373
cc3200: Place functions only used while booting in a special section.
...
Such functions are never used after MicroPython has started, and they
remain in RAM wasting space. Now they are placed in a special section
named "boot" which sits just before the heap, allowing us to extend
the effective heap area up to the new boot section. Right now, this
gives us back ~1K, but in the future, more functions might end up in
there as well.
2015-03-11 16:59:29 +01:00
d226dd2f59
cc3200: Add preliminary low power deep sleep support.
2015-03-11 16:54:09 +01:00
0475de1350
cc3200: Make WDT and HeartBeat constant objects on their own right.
2015-03-11 16:54:05 +01:00
d01060241a
cc3200: Add heartbeat signal on system led.
2015-02-28 19:03:21 +01:00
74589cbeeb
cc3200: Move code that disables/enables servers to wlan_sl_enable().
2015-02-26 11:19:15 +01:00
7a074a14ce
cc3200: Implement safe boot pin and system led behaviour.
...
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
2015-02-25 23:17:17 +01:00
11aa6ba456
cc3200: Add WDT functionality as part of the pyb module.
...
Also improve pybsd, and make it save it's pin configuration.
This is a necessary step towards supporting the CC3200 low
power deep sleep (LPDS) mode.
2015-02-25 11:37:29 +01:00
70b3160871
cc3200: Introduce MICROPY_PORT_HAS_TELNET and MICROPY_PORT_HAS_FTP.
...
These definitions help on making modwlan.c usable by other ports
with the CC3100.
2015-02-23 15:02:57 +01:00
379a3fa305
cc3200: Change UART.print() to make it consistent with the rest.
2015-02-23 15:02:55 +01:00
88b7f52ebb
cc3200: Replace WLAN.get_ip() with WLAN.ifconfig().
...
Also change other methods' names to make them consistent.
2015-02-23 15:02:55 +01:00
44bb616b53
cc3200: Add simplelink non-os task calls.
2015-02-22 18:59:50 +01:00
4bfc491753
cc3200: Add wlan_urn() thanks to Nadim El-Fata and Bryan Morrissey.
2015-02-22 18:43:01 +01:00
33ddb566a7
cc3200: Remove dependencies from FreeRTOS.
...
Use the simplelink wrappers instead. This is one step further
towards having a single module for the cc3200 and the cc3100.
2015-02-22 17:50:50 +01:00
92ea99a0fb
cc3200: Add support for connecting to WEP secured networks.
2015-02-21 22:27:54 +01:00
18605b36dc
cc3200: Rename SD.config() to SD.config_pins().
2015-02-21 22:27:48 +01:00
7102e51506
cc3200: Add UART __del__ method.
2015-02-21 22:27:44 +01:00
a7208bcc43
cc3200: Remove sd paths from sys path when disabling the sd card.
2015-02-21 22:27:39 +01:00
4a23a01945
cc3200: Add explicit py/ path-prefix for py includes.
...
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
59d14914cd
cc3200: Correct pybsd_config() params retrieval.
2015-02-21 14:26:38 +01:00
c020109cfa
cc3200: Add SD module and disable SD card support for the LAUNCHXL.
2015-02-21 14:19:40 +01:00
6b21c3fdd6
cc3200: Refactor UART and I2C object creation.
...
I2C objects can be freed by the GC and a __del__ method is provided
in order to de-init the peripheral prior to being garbage collected.
UART objects are now added to a local list and this list is now part
of the VM_STATE.
2015-02-20 16:41:55 +01:00
Daniel Campora
Josef Gajdusek
Damien George
danicampora