c7acfc90b9
cc3200: Enable pull-ups for the STDIO UART pins.
2015-04-07 10:50:20 +02:00
96b60ed956
cc3200: Fix typo after previous refactor.
2015-04-05 22:32:41 +03:00
3a84c8b58d
string0.c: Move from stmhal/ to lib/.
2015-04-05 21:57:55 +03:00
b9d850227d
cc3200: Add WLAN AP specific settings for each board.
2015-04-04 22:09:55 +02:00
d460a30711
cc3200: Add specific version file for the CC3200 port.
...
Current version has been numbered as 0.9.0 since Timers/PWM support
is still missing.
2015-03-31 14:34:09 +02:00
3f42f32648
cc3200: Remove duplicated code from moduos.
...
Error reporting is also changed from detailed to terse, as with the
rest of the CC3200's modules. All this combined saves ~200 bytes.
2015-03-31 14:34:07 +02:00
7b19e99edd
lib: Update FatFs to R0.11.
...
There are lots of cosmetic changes, but this release brings a very
important bug fix:
- Fixed f_unlink() does not remove cluster chain of the file.
With R0.10c if you try to write a file that is too large to fit in the
free space of the drive, the operation fails, you delete the incomplete
file, and it seems to be erased, but the space is not really freed,
because any subsequent write operations fail because the drive is
"still" full. The only way to recover from this is by formatting the
drive. I can confirm that R0.11 fixes the problem.
2015-03-29 22:12:14 +01:00
1eba62cac9
cc3200: Remove unneeded SPI instruction in the simplelink driver.
...
Setting the word count before a SPI transaction is only needed when
using DMA.
2015-03-26 20:50:39 +01:00
1826036a83
cc3200: Increase main stack size to 2K.
...
Increasing it from 1K to 2K gives more freedom to the callback
handlers, before this, simply nesting a function call into a
printf would cause a stack overflow.
2015-03-26 20:50:38 +01:00
760a6eca9b
cc3200: Minor refactorings on modwlan and pybsleep.
2015-03-26 14:27:21 +01:00
4be44014ab
cc3200: Reenable active interrupts when waking from suspended mode.
2015-03-26 13:58:58 +01:00
2d717ad97a
cc3200: Add callback support to the UART for RX interrupts.
2015-03-26 10:28:43 +01:00
e909e38871
cc3200: Remove superflous parameters from the SPI API.
2015-03-26 10:28:41 +01:00
7f41f650de
cc3200: Remove superflous params from the I2C API.
2015-03-25 16:56:14 +01:00
26d230419c
cc3200: Add GPIO25 to the pins list of the WiPy and the WiPy-SD.
...
This allows to properly initialize the system led and add it
to the sleep module so that it can be restored when resuming
from suspended mode.
2015-03-25 15:22:32 +01:00
4729a212b1
cc3200: Rename the WiPy_SD to WiPy-SD.
2015-03-25 15:22:27 +01:00
684dba40f0
cc3200: Roll back to the previous telnet and ftp timeouts.
...
Unfortunately, these timeouts are the only realiable way (for now), to
be able to detect broken connections due to half-open sockets. Such a
thing occurs when getting out of the WiFi coverage area or when
disconnecting from the AP (sometimes the client doesn't send the
disconnect packet).
2015-03-25 15:22:21 +01:00
e15f8198bc
cc3200: Keep WLAN enabled during the soft reset.
2015-03-25 15:22:16 +01:00
9d3588f2be
cc3200: Remove the cc3200.xml file. Latest CCS already ships with it.
2015-03-25 15:22:11 +01:00
104a867447
cc3200: Fix bug in telnet that caused the rx buffer to overflow.
2015-03-22 11:32:12 +01:00
59f6831336
cc3200: Reduce soft reset time. WLAN is not reinit, just reenabled.
2015-03-21 11:31:29 +01:00
77791b5633
cc3200: Improve usability and robustness of the servers.
2015-03-21 11:31:17 +01:00
c1c23e2f6a
cc3200: Remove superfluous code in pybsleep.
2015-03-21 11:27:26 +01:00
cd9bc14c8f
cc3200: Add SPI module.
...
Only MASTER mode is supported. Transfer width is configurable to
8, 16 or 32 bits.
2015-03-21 11:26:47 +01:00
c45e641c1d
cc3200: Re-name pybsystick to mpsystick.
2015-03-21 11:21:45 +01:00
f8ee88bbe0
cc3200: Move server methods from WLAN to the network module.
2015-03-19 17:08:25 +01:00
0e96d1b3f1
cc3200: Add parameter to wlan_stop() for custom timeout values.
2015-03-18 21:55:08 +01:00
f382f4442e
cc3200: Fixes and improvements to the SD card driver.
2015-03-18 21:55:02 +01:00
963d7c7ee6
cc3200: Refactor I2C. Remove all references to SLAVE mode.
2015-03-18 21:54:41 +01:00
d3912549a3
cc3200: Improve I2C timeout handling.
2015-03-18 21:54:30 +01:00
005a7f4190
cc3200: Fix extint_enable behaviour when the callback is updated.
2015-03-17 13:26:09 +01:00
181fe5016c
cc3200: Add RTC callback with wake-up from sleep capability.
2015-03-17 13:26:08 +01:00
6de1b39368
cc3200: Make peripheral objects static.
...
This prevents duplication of objects in the sleep list. Also helps
with reducing the code size by ~100 bytes.
2015-03-17 13:26:07 +01:00
fcf6db0695
cc3200: Register pybsd with the sleep module and use pin_config().
2015-03-17 13:26:06 +01:00
98b8568362
cc3200: Assign GPIO10 and GPIO11 to the GPIO peripheral on start-up.
2015-03-17 13:26:05 +01:00
ea43fa104e
cc3200: Remove unneeded functions and add pybsleep_remove() calls.
2015-03-17 13:26:03 +01:00
78d7c45b69
cc3200: Disable all wake sources on start-up.
2015-03-16 00:42:16 +01:00
ed20ac56f7
cc3200: Fix bug in RTC msec register access functions.
2015-03-16 00:42:15 +01:00
5dd8ae6b9c
cc3200: Fix spaces aligment in LAUNCHXL/mpconfigboard.h
2015-03-16 00:42:13 +01:00
0962358026
cc3200: Align SD card driver with new SDK release(1.1.0).
2015-03-16 00:42:13 +01:00
1080802e8f
cc3200: Update socket event handler to align with new SDK(1.1.0) API.
2015-03-16 00:42:11 +01:00
dc545d6512
cc3200: Do not reset the DTHE module before every SHA operation.
...
According to the new SDK (1.1.0) this is not needed, and it's best
not to do it, because this module is a shared resource.
2015-03-16 00:42:10 +01:00
b2cb75efb7
cc3200: Remove double administration of callback objects.
2015-03-16 00:42:09 +01:00
c292632b59
cc3200: Update simplelink SPI driver to SDK release version 1.1.0.
2015-03-16 00:42:06 +01:00
0d0646d915
cc3200: Update HAL to SDK release version 1.1.0.
2015-03-16 00:42:05 +01:00
2c103d5200
cc3200: Rewrite the PRCM RTC functionality methods.
...
This allows to use the On-Chip retention registers for both the
RTC and to share notification flags between the bootloader and the
application. The two flags being shared right now are the "safe boot"
request and the WDT reset cause. we still have 2 more bits free for
future use.
2015-03-14 10:08:47 +01:00
d432bcb9ac
cc3200: Prevent multiple memory allocations if sflash init fails.
2015-03-14 10:08:46 +01:00
2ae17def52
cc3200: Clean up linker scripts and startup file.
2015-03-14 10:08:45 +01:00
09721e2314
cc3200: Increase heartbeat period from 3 to 5 seconds.
2015-03-14 10:08:44 +01:00
c7fabe1f3e
cc3200: Remove unneeded code from modwlan and optimize startup time.
...
These changes also help reduce the hibernate wake-up time to 1s.
2015-03-14 10:08:43 +01:00
04749e677f
cc3200: Allow separate selection of the power mode in Pin callbacks.
2015-03-12 16:22:17 +01:00
10f7ef0832
cc3200: Keep WLAN enabled during suspend mode.
2015-03-12 16:22:16 +01:00
d1ba8b7659
cc3200: Correct WiPy's pinout and the pin generation script.
2015-03-12 16:22:15 +01:00
6ae9383f63
cc3200: Remove WLAN.getmode since it's superseded by WLAN.ifconfig.
2015-03-12 16:22:13 +01:00
37337427c3
cc3200: Trigger a new network scan when WLAN.scan() is called.
2015-03-12 16:22:12 +01:00
b761ed2103
cc3200: Register ADC and I2C with the sleep module.
2015-03-11 22:09:52 +01:00
db0580d0a5
cc3200: Reduce stack sizes of simplelink and the servers.
2015-03-11 22:09:51 +01:00
e9786f40f5
cc3200: Disable WLAN in suspended mode if NW wake is not enabled.
2015-03-11 17:11:10 +01:00
8cbbaa052a
cc3200: Add WiPy and WiPy_SD board support.
2015-03-11 17:00:38 +01:00
9e44383e3f
cc3200: Add power management framework. Add mpcallback class.
...
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
73aee8da54
cc3200: Merge ExtInt class into Pin class.
...
Also add another method to change the pin's interrupt mode
on the fly.
2015-03-11 17:00:28 +01:00
26cbc91373
cc3200: Place functions only used while booting in a special section.
...
Such functions are never used after MicroPython has started, and they
remain in RAM wasting space. Now they are placed in a special section
named "boot" which sits just before the heap, allowing us to extend
the effective heap area up to the new boot section. Right now, this
gives us back ~1K, but in the future, more functions might end up in
there as well.
2015-03-11 16:59:29 +01:00
02fda44a30
cc3200: Combine and disable sections in startup_gcc.c to reduce size.
2015-03-11 16:54:14 +01:00
d226dd2f59
cc3200: Add preliminary low power deep sleep support.
2015-03-11 16:54:09 +01:00
0475de1350
cc3200: Make WDT and HeartBeat constant objects on their own right.
2015-03-11 16:54:05 +01:00
d01060241a
cc3200: Add heartbeat signal on system led.
2015-02-28 19:03:21 +01:00
6a41bf99bd
cc3200: Create separate release/debug build directories
2015-02-28 19:03:17 +01:00
74589cbeeb
cc3200: Move code that disables/enables servers to wlan_sl_enable().
2015-02-26 11:19:15 +01:00
5330d8996f
cc3200: Modify simplelink FreeRTOS OSI layer to only use semaphores.
...
Before, both mutexes and semaphores were used. Using only the latter
and with a bit of cleanup to remove some code bloat, we save ~600
bytes of code.
2015-02-26 11:18:18 +01:00
f3661d4100
cc3200: Change PRCM_PeriphRegs_t fields to unsigned char.
...
This helps saving ~300 bytes. Thanks to dpgeorge.
2015-02-25 23:25:23 +01:00
7a074a14ce
cc3200: Implement safe boot pin and system led behaviour.
...
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
2015-02-25 23:17:17 +01:00
8a5aee103d
cc3200: Fix md5 application signing, add missing accents.
2015-02-25 23:17:12 +01:00
11aa6ba456
cc3200: Add WDT functionality as part of the pyb module.
...
Also improve pybsd, and make it save it's pin configuration.
This is a necessary step towards supporting the CC3200 low
power deep sleep (LPDS) mode.
2015-02-25 11:37:29 +01:00
fe2eb5f58a
cc3200: Update README.md to add step for flashing the bootloader.
2015-02-25 11:36:56 +01:00
70b3160871
cc3200: Introduce MICROPY_PORT_HAS_TELNET and MICROPY_PORT_HAS_FTP.
...
These definitions help on making modwlan.c usable by other ports
with the CC3100.
2015-02-23 15:02:57 +01:00
379a3fa305
cc3200: Change UART.print() to make it consistent with the rest.
2015-02-23 15:02:55 +01:00
88b7f52ebb
cc3200: Replace WLAN.get_ip() with WLAN.ifconfig().
...
Also change other methods' names to make them consistent.
2015-02-23 15:02:55 +01:00
44bb616b53
cc3200: Add simplelink non-os task calls.
2015-02-22 18:59:50 +01:00
4bfc491753
cc3200: Add wlan_urn() thanks to Nadim El-Fata and Bryan Morrissey.
2015-02-22 18:43:01 +01:00
0c11b167a7
cc3200: Add optimization flags to drivers/cc3100 in the debug build.
2015-02-22 17:50:52 +01:00
33ddb566a7
cc3200: Remove dependencies from FreeRTOS.
...
Use the simplelink wrappers instead. This is one step further
towards having a single module for the cc3200 and the cc3100.
2015-02-22 17:50:50 +01:00
3611c1de14
drivers/cc3100: Remove dependence on debug.h.
2015-02-21 22:04:07 +00:00
92ea99a0fb
cc3200: Add support for connecting to WEP secured networks.
2015-02-21 22:27:54 +01:00
18605b36dc
cc3200: Rename SD.config() to SD.config_pins().
2015-02-21 22:27:48 +01:00
7102e51506
cc3200: Add UART __del__ method.
2015-02-21 22:27:44 +01:00
a7208bcc43
cc3200: Remove sd paths from sys path when disabling the sd card.
2015-02-21 22:27:39 +01:00
5ca1f5f9d9
cc3200: Get compiling with CC3100 driver from drivers/ directory.
2015-02-21 19:55:57 +00:00
49c2ad4fb4
cc3200: Move CC3100 driver from cc3200/simplelink to drivers/cc3100.
...
This commit will not build, it exists just to track changes.
2015-02-21 19:52:07 +00:00
36e2845e36
cc3200: Replace physical tabs with spaces.
...
Preparing this to move to drivers/ directory, want to make it as similar
to original code from TI as possible.
2015-02-21 19:48:34 +00:00
4a23a01945
cc3200: Add explicit py/ path-prefix for py includes.
...
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
59d14914cd
cc3200: Correct pybsd_config() params retrieval.
2015-02-21 14:26:38 +01:00
c020109cfa
cc3200: Add SD module and disable SD card support for the LAUNCHXL.
2015-02-21 14:19:40 +01:00
571e3f5804
cc3200: Add exit values to the shell scripts.
2015-02-21 14:19:36 +01:00
a6862fc812
cc3200: Disable MICROPY_OPT_COMPUTED_GOTO.
...
Saves around 1.3K. At the same time re-enable MICROPY_PY_SYS_EXIT
since it doesn't take much space and might be useful for certain
scripts.
2015-02-21 14:19:32 +01:00
82fabf4e52
cc3200: Disable MICROPY_PY_SYS_EXIT and MICROPY_EMIT_INLINE_THUMB.
...
Disabling MICROPY_EMIT_INLINE_THUMB gives us back around 6K of
precious RAM.
2015-02-20 17:12:39 +01:00
6b21c3fdd6
cc3200: Refactor UART and I2C object creation.
...
I2C objects can be freed by the GC and a __del__ method is provided
in order to de-init the peripheral prior to being garbage collected.
UART objects are now added to a local list and this list is now part
of the VM_STATE.
2015-02-20 16:41:55 +01:00
7807da20ab
cc3200: Increase UART default read buffer size to 128 bytes.
2015-02-20 16:41:49 +01:00
868fa82ea4
cc3200: Add ADC module.
2015-02-20 16:40:59 +01:00
5d2344d009
cc3200: Change safe-boot pin to GPIO28.
2015-02-20 16:40:19 +01:00
2b899b6708
cc3200: Remove asserts from sl_Stop() and reduce timeout to 250ms.
2015-02-20 16:40:15 +01:00
6ff9a47255
cc3200: Move `closed` field in mod_network_socket_obj_t out of the union.
2015-02-20 16:40:10 +01:00
e1dfc44178
cc3200: Disable FreeRTOS asserts. Optimize more files if BTYPE=debug.
2015-02-20 16:40:06 +01:00
99f3f6b5de
cc3200: Add I2C module. Only master mode is currently supported.
2015-02-13 17:54:04 +01:00
ccf45a4283
cc3200: Get bootloader compiling with changes to HAL.
2015-02-13 15:26:22 +00:00
0b32e50365
stmhal: Make pybstdio usable by other ports, and use it.
...
Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so
long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-13 15:04:53 +00:00
53716fcc3e
cc3200: Rename GPIO module to Pin.
...
This change helps making the cc3200 port API a bit closer to stmhal.
The ramaining differences are due to the specific hardware details
of each chip. One feature that has been deliberately disabled is the
possibility to add custom names and custom pin mappings. Those
features are nice and convenient, but in this port, code size is a
major concern.
2015-02-09 20:01:54 +01:00
f8146d021b
cc3200: Add bootmanager relocator to the repository.
...
This file was accidentally skipped when the cc3200 port was added to the
tree since binary files are by default igonerd by git. This is a small
precompiled piece of software provided by TI that simply relocates the
boot manager to the beginning of the RAM space after it has been written
by the ROM bootloader.
2015-02-09 15:03:12 +01:00
0bfc7638ba
py: Protect mp_parse and mp_compile with nlr push/pop block.
...
To enable parsing constants more efficiently, mp_parse should be allowed
to raise an exception, and mp_compile can already raise a MemoryError.
So these functions need to be protected by an nlr push/pop block.
This patch adds that feature in all places. This allows to simplify how
mp_parse and mp_compile are called: they now raise an exception if they
have an error and so explicit checking is not needed anymore.
2015-02-07 18:33:58 +00:00
8785645a95
cc3200: Add cc3200 port of MicroPython.
...
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
2015-02-06 22:10:11 +00:00
Daniel Campora
Paul Sokolovsky
danicampora
Johan Hendriks
Damien George