a67d9155e6
travis: Switch unix stackless build to use clang.
...
To test a different compiler, other than gcc.
2019-07-17 15:52:27 +10:00
baea43bba7
stm32/boards/B_L072Z_LRWAN1: Enable USB VCP support.
2019-07-16 14:50:44 +10:00
64aebca155
stm32/Makefile: Allow a board to disable float support.
...
By using "MICROPY_FLOAT_IMPL = none" in its mpconfigboard.mk file.
2019-07-16 14:47:32 +10:00
102d9911e9
stm32/mphalport: Fix GPIO clock enable for L0 MCUs.
2019-07-16 14:47:12 +10:00
4096fa397b
stm32/powerctrlboot: Increase SYSCLK to 32MHz for L0 MCUs.
2019-07-16 14:46:31 +10:00
4c1ad1f691
stm32: Add support for USB on L0 MCUs.
2019-07-16 14:45:53 +10:00
788e7f50f2
stm32/usbd_cdc_interface: Make CDC TX/RX buffer sizes configurable.
2019-07-16 14:41:59 +10:00
f302f784e9
stm32/usb: Add config options to disable USB MSC and/or HID.
...
The new configurations MICROPY_HW_USB_MSC and MICROPY_HW_USB_HID can be
used by a board to enabled or disable MSC and/or HID. They are both
enabled by default.
2019-07-16 14:39:21 +10:00
154062d9cb
py/makeqstrdata.py: Allow using \r\n as a qstr if a port requires it.
2019-07-12 17:10:11 +10:00
82dc9856b0
py/asmarm: Use __builtin___clear_cache instead of __clear_cache.
...
__clear_cache causes a compile error when using clang. Instead use
__builtin___clear_cache which is available under both gcc and clang.
Also replace tabs with spaces in this section of code (introduced by a
previous commit).
2019-07-12 16:48:37 +10:00
d6e3038a08
ACKNOWLEDGEMENTS: Remove entry as requested by backer.
2019-07-12 12:57:37 +10:00
fd49fcb229
stm32/gccollect: Always use MP_STATE_THREAD(stack_top) to get stack top.
...
In a non-thread build, using &_ram_end as the top-of-stack is no longer
correct because the stack is not always at the very top end of RAM. See
eg 04c7cdb6683786592097
2019-07-11 17:32:01 +10:00
a73859d5af
py/objgenerator: Add missing #if guard for PY_GENERATOR_PEND_THROW.
...
Without it, gen_instance_pend_throw_obj is defined but not used when
MICROPY_PY_GENERATOR_PEND_THROW is set to 0.
2019-07-09 13:24:23 +10:00
a1c870e9f4
javascript: Enable support for frozen bytecode via FROZEN_MPY_DIR.
2019-07-09 13:17:15 +10:00
42d30c5baf
unix/unix_mphal: Include time.h for CLOCK_MONOTONIC.
2019-07-09 13:05:59 +10:00
a17b901a9e
stm32/boards/B_L072Z_LRWAN1: Add definition files for new board.
2019-07-09 12:54:09 +10:00
14f61a224d
travis: Build stm32 mboot for PYBD_SF6 as part of CI.
2019-07-09 11:47:57 +10:00
278e9bffe9
stm32/mboot: Update dependencies to enable parallel build with -j.
2019-07-09 11:46:47 +10:00
342539bdcc
stm32/mboot: Use STARTUP_FILE from stm32lib.
2019-07-09 11:35:47 +10:00
5a81d2d6b8
stm32/mboot: Remove use of BSRRL/H for H7 MCUs due to stm32lib update.
2019-07-09 11:34:54 +10:00
c8f19f1371
stm32/mboot: Make _estack an array to avoid compiler warnings.
...
The compiler can warn about out-of-bounds array access if _estack is just a
single uint8_t.
2019-07-09 11:33:57 +10:00
d43dd886a5
stm32/boards/NUCLEO_F413ZH: Remove STARTUP_FILE, it's defined globally.
...
The Makefile now defines this variable to the correct value (but it can
still be overridden by a board if necessary).
2019-07-09 11:32:12 +10:00
c24d81119c
stm32/boards/NUCLEO_L452RE: Add definition files for new board.
2019-07-08 16:50:45 +10:00
64181b5f76
stm32: Add support for STM32L452 MCUs.
2019-07-08 16:50:19 +10:00
eea61a09c4
stm32/boards/NUCLEO_F446RE: Enable DAC.
2019-07-08 16:08:40 +10:00
5fd62c8992
stm32: Remove SystemInit funcs, use stm32lib versions instead.
...
stm32lib now provides system_stm32XXxx.c source files for all MCU variants,
which includes SystemInit and prescaler tables. Since these are quite
standard and don't need to be changed, switch to use them instead of custom
variants, making the start-up code cleaner.
The SystemInit code in stm32lib was checked and is equivalent to what is
removed from the stm32 port in this commit.
2019-07-08 15:23:53 +10:00
c15dc2c4b9
stm32/powerctrl: Move F0's SystemClock_Config to powerctrlboot.c.
2019-07-08 15:23:53 +10:00
21ecf8be5f
stm32/powerctrl: Move L0's SystemClock_Config to powerctrlboot.c file.
2019-07-08 15:23:53 +10:00
7c2e83324b
stm32/boards/NUCLEO_L073RZ: Add definition files for new board.
2019-07-05 17:28:54 +10:00
6053e450b8
stm32/mpconfigport.h: Make "framebuf" module configurable by a board.
2019-07-05 17:26:49 +10:00
9c096c190c
stm32/boards: Add MCU support files for STM32L072.
2019-07-05 17:26:03 +10:00
23d9c6a0fd
stm32: Add initial support for STM32L0xx MCUs.
2019-07-05 17:24:59 +10:00
fa5c0b819c
esp32/network_ppp: Add ppp_set_usepeerdns(pcb, 1) when init'ing iface.
...
Without this you often don't get any DNS server from your network provider.
Additionally, setting your own DNS _does not work_ without this option set
(which could be a bug in the PPP stack).
2019-07-04 11:17:41 +10:00
c1a8c7fc09
stm32/boards/PYBD_SFx: Automatically turn on EN_3V3 when powering SD/MMC
2019-07-04 11:11:11 +10:00
7f33f158b9
stm32/sdcard: Add hook for a board to power on SD/MMC.
2019-07-04 11:10:54 +10:00
1cd2bc066d
stm32/boards/PYBD_SFx: Configure EN_3V3 pin as output on boot.
...
But leave it turned off, the application must turn it on if/when needed.
2019-07-04 11:03:10 +10:00
afb2e9dd94
stm32/modmachine: Disable IRQs before entering bootloader.
...
To make sure that the code that enters the bootloader is not interrupted.
2019-07-04 10:49:51 +10:00
04da8864e5
stm32/lwip_inc: Define LWIP_NO_CTYPE_H=1 to use lwIP ctype funcs.
2019-07-04 10:36:51 +10:00
1b79484ee3
lib/lwip: Update lwIP to v2.1.2, tag STABLE-2_1_2_RELEASE.
2019-07-04 10:36:23 +10:00
592f68449d
stm32/mpu: Include MPU functions when ETH is enabled.
2019-07-03 23:50:34 +10:00
7cf8285ac8
stm32/boards: Remove startup_stm32*.s files now they are in stm32lib.
2019-07-03 23:44:17 +10:00
6b6403ce76
stm32/Makefile: Use startup_stm32*.s file from stm32lib.
...
This means that each MCU now gets a unique IRQ table, eg a specific one for
STM32F405, STM32F411, etc rather than just STM32F4xx.
2019-07-03 23:42:36 +10:00
241e577753
stm32/Makefile: Remove Wno-attributes for ll_usb HAL file.
...
This HAL file is now patched so it doesn't have these warnings.
2019-07-03 23:41:33 +10:00
73e8b7e0e4
stm32: Update components to work with new H7xx HAL.
2019-07-03 23:40:49 +10:00
9083166c4f
lib/stm32lib: Update library for updated H7xx, new L0xx, new WBxx.
...
And this library now includes the startup_stm32*.s files for each MCU.
2019-07-03 23:36:43 +10:00
3581deec81
stm32/boards/PYBD_SF2: Put mbedtls library code in external QSPI flash.
...
mbedtls is large and self contained so is a good candidate to be in
external XIP flash, to keep enough spare ROM in internal flash.
2019-07-03 16:50:02 +10:00
f88cb8a514
stm32/modmachine: Make RTC class available in machine module.
...
This is a start to make a more consistent machine.RTC class across ports.
The stm32 pyb.RTC class at least has the datetime() method which behaves
the same as esp8266 and esp32, and with this patch the ntptime.py script
now works with stm32.
2019-07-03 16:46:07 +10:00
c60caf1995
extmod/modlwip: Use mp_sched_schedule to schedule socket callbacks.
...
The helper function exec_user_callback executes within the context of an
lwIP C callback, and the user (Python) callback to be scheduled may want to
perform further TCP/IP actions, so the latter should be scheduled to run
outside the lwIP context (otherwise it's effectively a "hard IRQ" and such
callbacks have lots of restrictions).
2019-07-03 16:22:48 +10:00
1d6cb6357a
extmod/modlwip: For TCP send keep trying tcp_write if it returns ERR_MEM
...
If tcp_write returns ERR_MEM then it's not a fatal error but instead means
the caller should retry the write later on (and this is what lwIP's netconn
API does).
This fixes problems where a TCP send would raise OSError(ENOMEM) in
situations where the TCP/IP stack is under heavy load. See eg issues #1897
and #1971 .
2019-07-03 15:50:13 +10:00
ef00048fed
extmod/modwebrepl: Add config option to put filebuf[512] on stack/bss.
...
Since the esp8266 has a small stack this buffer is kept in the BSS.
2019-07-03 12:55:57 +10:00
Damien George
Paul m. p. P
David Lechner
Laurens Valk
Chris Mason
Eric Poulsen