Commit Graph

15245 Commits

Author SHA1 Message Date
Jim Mussared c2361328e1 github/workflows: Pin ruff to 0.1.0 and change flags for new version.
The `--format` flag was changed to `--output-format` in the recent update.

Pin to this version to prevent further updates from breaking (e.g. through
new rules or other changes).

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-17 13:56:33 +11:00
Damien George 971f1cf987 stm32/powerctrl: Add support for frequency scaling with HSI on H5 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-17 12:41:47 +11:00
Damien George e15882ad2b stm32/boards/STM32H573I_DK: Enable ETH and DAC peripherals.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-17 11:44:16 +11:00
Rene Straub 51da8cc28b stm32/eth: Add Ethernet support for H5 MCUs.
This commit implements Ethernet support for STM32H5.  Changes are:

- Add Cortex-M33 MPU code.  Ethernet driver requires MPU to define cache
  strategy for DMA buffers (descriptors and frames).
- Add support for STM32H5 Ethernet controller.  The controller is mostly
  compatible with the STM32H7.  However the descriptor layout is different.
- Adapt clocking and reset for STM32H5.

Tested on NUCLEO-H563ZI and STM32H573I-DK, using ping and iperf3.  TCP
rates of 80-90 Mbits/sec were achievable.

Signed-off-by: Rene Straub <rene@see5.ch>
Signed-off-by: Damien George <damien@micropython.org>
2023-10-17 11:40:54 +11:00
iabdalkader 8b12923da2 stm32/boards/ARDUINO_GIGA: Fix name of pins in board init.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2023-10-17 00:35:16 +11:00
robert-hh f84b4617cb rp2/cyw43_configport: Use m_tracked_calloc and m_tracked_free.
When using malloc and free there were out-of-memory situations depending on
the arm-none-eabi package version.  This commit changes malloc/free to use
the MicroPython GC heap instead.

Signed-off-by: robert-hh <robert@hammelrath.com>
Signed-off-by: Damien George <damien@micropython.org>
2023-10-16 23:36:54 +11:00
iabdalkader 4074f828dd stm32/boards/ARDUINO_GIGA: Add QSPI fix/workaround to early init.
This workaround fixes an issue with some production boards that have
an older QSPI flash part revision, which can't handle floating pins.
Note those pins can be reconfigured and reused later.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2023-10-16 23:14:13 +11:00
Thomas Ackermann ac4f79592b docs/library/io: Remove io.FileIO and io.TextIOWrapper.
FileIO and TextIOWrapper were removed in
e65d1e69e8.  Remove them also from the
documentation.

Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
2023-10-16 23:07:13 +11:00
Jim Mussared 8eb7721b4a extmod/modframebuf: Remove FrameBuffer1 from natmod build.
This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-16 12:18:43 +11:00
Jim Mussared 03a9fa227d extmod/modframebuf: Fix FrameBuffer get-buffer implementation.
This wasn't correctly accounting for the bits-per-pixel and was returning a
bufinfo struct with the incorrect length.  Instead, just forward directly
to the underlying buffer object.

Fixes issue #12563.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-16 12:18:08 +11:00
Jim Mussared d040478d8a extmod/modframebuf: Validate FrameBuffer bounds against input buffer.
This ensures that the buffer is large enough for the specified width,
height, bits-per-pixel, and stride.

Also makes the legacy FrameBuffer1 constructor re-use the FrameBuffer
make_new to save some code size.

Fixes issue #12562.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-16 12:17:51 +11:00
Damien George a1be5e1439 docs/reference/mpyfiles: Document change in .mpy sub-version.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-16 11:28:32 +11:00
Damien George 6967ff3c58 py/persistentcode: Bump .mpy sub-version.
This is required because the previous commit changed the .mpy native ABI.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-16 11:25:31 +11:00
Damien George 9b63421fb3 py/dynruntime: Add mp_get_buffer.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-16 11:23:11 +11:00
Damien George 9c7ea9b14a py/obj: Generalise mp_get_buffer so it can raise if a flag is set.
This allows mp_get_buffer_raise() to be changed to a simple inline function
that in the majority of cases costs the same (in code size) to call as the
original mp_get_buffer_raise(), because the flags argument is a constant.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-16 11:22:55 +11:00
Damien George 516385c4cc py/objboundmeth: Optimise check for types in binary_op.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-13 15:29:09 +11:00
Ned Konz 66c62353ce tests/basics/boundmeth1.py: Add tests for bound method equality/hash.
This commit adds tests for bound method comparison and hashing to support
the changes in the previous commit.

Signed-off-by: Ned Konz <ned@productcreationstudio.com>
2023-10-13 15:15:49 +11:00
Daniël van de Giessen 4f5e165d0b py/objboundmeth: Support comparing and hashing bound methods.
This behaviour matches CPython.  It's useful to be able to store bound
method objects in dicts/sets, and compare for equality, eg when storing
them in a list and using list.remove().

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2023-10-13 15:11:49 +11:00
Matthias Urlichs 5f0bd33b73 extmod/asyncio: Emit errors to stderr, not stdout.
Sometimes these are different file descriptors, not to mention the Unix
port, so use stderr to distinguish these error messages.

CPython prints to stdout, but it does it via a call to the logging module.
We don't want to introduce a dependency on logging, so printing to stderr
is a good alternative.  One can override default_exception_handler() if
needed.
2023-10-13 14:55:54 +11:00
Damien George 05cb1406ad extmod/moductypes: Validate that uctypes.struct addr argument is an int.
Fixes issue #12660.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-12 15:47:15 +11:00
Jim Mussared 5015779a6f py/builtinevex: Handle invalid filenames for execfile.
If a non-string buffer was passed to execfile, then it would be passed
as a non-null-terminated char* to mp_lexer_new_from_file.

This changes mp_lexer_new_from_file to take a qstr instead (as in almost
all cases a qstr will be created from this input anyway to set the
`__file__` attribute on the module).

This now makes execfile require a string (not generic buffer) argument,
which is probably a good fix to make anyway.

Fixes issue #12522.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-12 15:17:59 +11:00
robert-hh 480659b1ac ports: Make all ports skip execution of main.py if boot.py fails.
That can be caused e.g. by an exception.  This feature is implemented in
some way already for the stm32, renesas-ra, mimxrt and samd ports.  This
commit adds it for the rp2, esp8266, esp32 and nrf ports.  No change for
the cc3200 and teensy ports.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-10-12 11:53:29 +11:00
Andrew Leech d2a9d70c09 tools/ci.sh: Ensure enough commits are fetched for a common ancestor.
This commit updates the ci script to automatically fetch all upstream if
the common commit hasn't been found; this should preserve the speed of CI
checks for most PR's, and use a reliable but slow fetch if needed for older
ones.

Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
2023-10-11 14:05:14 +11:00
Glenn Moloney 9f835df35e esp32,esp8266: Rename MICROPY_ESPNOW to MICROPY_PY_ESPNOW.
For consistency with other Python-level modules.

Also add the corresponding missing preprocessor guard to esp32/modespnow.c,
so that this port compiles if MICROPY_PY_ESPNOW and MICROPY_PY_NETWORK_WLAN
are set to 0.

Fixes #12622.

Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
2023-10-10 17:56:36 +11:00
robert-hh a06f4c8df4 mimxrt/led: Fix LED init call from main, and simplify led_init.
led_init() was not called, and therefore the machine.LED class seemed not
to work.  led_init() now uses mp_hal_pin_output() to configure the pin.

Signed-off-by: robert-hh <robert@hammelrath.com>
2023-10-09 17:10:45 +11:00
Matthias Urlichs 3fb1bb131f py/vm: Don't emit warning when using "raise ... from None".
"Raise SomeException() from None" is a common Python idiom to suppress
chained exceptions and thus shouldn't trigger a warning on a version of
Python that doesn't support them in the first place.
2023-10-09 09:46:02 +11:00
Jim Mussared 5232847771 README.md: Update CI badges.
- Fix URL for the unix badge.
- Add stm32 CI badge.
- Add docs CI badge (linking to the documentation)
- Make docs CI run on push (so we get a badge generated).

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-06 16:39:55 +11:00
Jim Mussared 69e34b6b6b all: Switch to new preview build versioning scheme.
See https://github.com/micropython/micropython/issues/12127 for details.

Previously at the point when a release is made, we update mpconfig.h
and set a git tag. i.e. the version increments at the release.

Now the version increments immediately after the release. The workflow is:
1. Final commit in the cycle updates mpconfig.h to set (X, Y, 0, 0) (i.e.
   clear the pre-release state).
2. This commit is tagged "vX.Y.0".
3. First commit for the new cycle updates mpconfig.h to set (X, Y+1, 0, 1)
   (i.e. increment the minor version, set the pre-release state).
4. This commit is tagged "vX.Y+1.0-preview".

The idea is that a nightly build is actually a "preview" of the _next_
release. i.e. any documentation describing the current release may not
actually match the nightly build. So we use "preview" as our semver
pre-release identifier.

Changes in this commit:
 - Add MICROPY_VERSION_PRERELEASE to mpconfig.h to allow indicating that
   this is not a release version.
 - Remove unused MICROPY_VERSION integer.
 - Append "-preview" to MICROPY_VERSION_STRING when the pre-release state
   is set.
 - Update py/makeversionhdr.py to no longer generate MICROPY_GIT_HASH.
 - Remove the one place MICROPY_GIT_HASH was used (it can use
   MICROPY_GIT_TAG instead).
 - Update py/makeversionhdr.py to also understand
   MICROPY_VERSION_PRERELEASE in mpconfig.h.
 - Update py/makeversionhdr.py to convert the git-describe output into
   semver-compatible "X.Y.Z-preview.N.gHASH".
 - Update autobuild.sh to generate filenames using the new scheme.
 - Update remove_old_firmware.py to match new scheme.
 - Update mpremote's pyproject.toml to handle the "-preview" suffix in the
   tag. setuptools_scm maps to this "rc0" to match PEP440.
 - Fix docs heading where it incorrectly said "vvX.Y.Z" for release docs.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-06 12:10:14 +11:00
Damien George e00a144008 all: Bump version to 1.21.0.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-06 10:32:07 +11:00
Damien George 6f76d1c7fa rp2: Implement time.time_ns with time_us_64 so it has us resolution.
Currently on rp2 the time.time_ns() function has only seconds resolution.
This commit makes it have microsecond resolution, by using the output of
time_us_64() instead of the RTC.

Tested that it does not drift from the RTC over long periods of time.

Signed-off-by: Damien George <damien.p.george@gmail.com>
2023-10-05 21:24:47 +11:00
Damien George c2e9a6f2a5 esp8266/boards/ESP8266_GENERIC: Remove urllib from the 2MiB manifest.
No other network-enabled board has urllib.urequest frozen in to the
firmware, and esp8266 is relatively low on flash, so remove this module.

And (u)requests is already included by bundle-networking.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-05 20:55:52 +11:00
Glenn Moloney f0f173ff5c esp32/boards/manifest.py: Freeze aioespnow into firmware by default.
Also remove corresponding commented line from esp8266/boards/manifest.py.
It doesn't have enough flash to have this frozen by default.

Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
2023-10-05 20:50:49 +11:00
Angus Gratton d81cf0b9e3 rp2/CMakeLists: Enable debug symbols in all builds.
Allows using gdb, addr2line, etc. on a "release" ELF file.

No impact to .bin or .uf2 size, only the .elf will get bigger.

This work was funded through GitHub Sponsors.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2023-10-05 14:08:17 +11:00
Damien George 040a96d00e docs,tools: Change remaining "urequests" references to "requests".
Signed-off-by: Damien George <damien@micropython.org>
2023-10-05 14:04:45 +11:00
Damien George 342ebcb41d lib/micropython-lib: Update submodule to latest.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-05 11:21:34 +11:00
Damien George 5d53783a46 lib/cyw43-driver: Update driver to latest version v1.0.2.
Includes more error checking, and a fix to handle buffer overflow when
getting STA MACs.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-05 11:20:05 +11:00
iabdalkader 5aec051f9f stm32/i2c: Add support for I2C4 on H7 MCUs.
The current code assumes all I2Cs are on the same peripheral bus, which is
not true for I2C4 and the same goes for the clock enable code.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2023-10-05 10:26:59 +11:00
stijn cac666f38c extmod/vfs_posix_file: Fix flush handling in msvc builds.
Flushing console output in msvc builds always fails because that
output is not buffered so don't propagate that as an error (in a
simlar way as was done in 1c047742 for macOS).

Signed-off-by: stijn <stijn@ignitron.net>
2023-10-05 10:18:24 +11:00
Damien George 92717a95c0 tools/metrics.py: Fix esp32 and esp8266 board names after renaming.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-04 15:44:25 +11:00
Luca Burelli 1cd61149e4 esp32/boards/ARDUINO_NANO_ESP32: Use Arduino USB IDs.
The IDF-provided version of TinyUSB defaults to Espressif's standard
VID:PID unless specific sdkconfig options are present. The numbers
already defined for the CUSTOM_* config options were ignored otherwise.

Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
2023-10-04 13:06:14 +11:00
Jim Mussared 65a3ce39a3 extmod/modnetwork: Forward if.config(hostname) to network.hostname.
This removes the duplicate code in cyw43, esp32, esp8266 that implements
the same logic as network.hostname.

Renames the `mod_network_hostname` (where we store the hostname value in
`.data`) to `mod_network_hostname_data` to make way for calling the shared
function `mod_network_hostname`.

And uses memcpy for mod_network_hostname_data, because the length of source
is already known and removes reliance on string data being null-terminated.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-04 12:39:51 +11:00
Jim Mussared b329fdcb73 extmod/modnetwork: Increase max hostname length to 32.
This changes from the previous limit of 15 characters.  Although DHCP and
mDNS allow for up to 63, ESP32 and ESP8266 only allow 32, so this seems
like a reasonable limit to enforce across all ports (and avoids wasting the
additional memory).

Also clarifies that `MICROPY_PY_NETWORK_HOSTNAME_MAX_LEN` does not include
the null terminator (which was unclear before).

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-04 12:39:23 +11:00
Damien George d6c55a40fe top: Update .git-blame-ignore-revs for latest spelling fix commit.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-03 12:10:31 +11:00
Damien George cf490a7091 all: Fix various spelling mistakes found by codespell 2.2.6.
Signed-off-by: Damien George <damien@micropython.org>
2023-10-03 11:24:50 +11:00
iabdalkader 9d5d2e8cf7 renesas-ra: Tune lwip buffers and timing to improve network performance.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2023-10-03 10:17:51 +11:00
iabdalkader 5c8099003c renesas-ra/boards/ARDUINO_PORTENTA_C33: Update WiFi config.
Changes are:
- Enable IRQ on WiFi data ready pin.
- Fix WiFi SPI clock (an exact 30MHz is not possible).
- Update WiFi pins.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2023-10-03 10:17:28 +11:00
iabdalkader 279e2561f2 drivers/esp_hosted_hal: Add support for WiFI LED activity indicator.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2023-10-02 14:47:31 +02:00
iabdalkader a43e13c67b drivers/esp-hosted: Fix MTU size.
The maximum SPI frame payload is 1600 - header_size.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2023-10-02 14:47:31 +02:00
iabdalkader 379b583b2f drivers/esp_hosted: Fix pin IRQ.
This patch reinstalls the pin IRQ handler on WiFi init, as some
ports disable/remove pin IRQs on soft-reboot, or deinit the pins.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2023-10-02 14:47:31 +02:00
Jim Mussared 977dc9a369 extmod/asyncio/stream.py: Fix cancellation handling of start_server.
The following code:

  server = await asyncio.start_server(...)
  async with server:
    ... code that raises ...

would lose the original exception because the server's task would not have
had a chance to be scheduled yet, and so awaiting the task in wait_closed
would raise the cancellation instead of the original exception.

Additionally, ensures that explicitly cancelling the parent task delivers
the cancellation correctly (previously was masked by the server loop), now
this only happens if the server was closed, not when the task was
cancelled.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-10-02 14:11:52 +11:00