This commit implements Ethernet support for STM32H5. Changes are:
- Add Cortex-M33 MPU code. Ethernet driver requires MPU to define cache
strategy for DMA buffers (descriptors and frames).
- Add support for STM32H5 Ethernet controller. The controller is mostly
compatible with the STM32H7. However the descriptor layout is different.
- Adapt clocking and reset for STM32H5.
Tested on NUCLEO-H563ZI and STM32H573I-DK, using ping and iperf3. TCP
rates of 80-90 Mbits/sec were achievable.
Signed-off-by: Rene Straub <rene@see5.ch>
Signed-off-by: Damien George <damien@micropython.org>
When using malloc and free there were out-of-memory situations depending on
the arm-none-eabi package version. This commit changes malloc/free to use
the MicroPython GC heap instead.
Signed-off-by: robert-hh <robert@hammelrath.com>
Signed-off-by: Damien George <damien@micropython.org>
This workaround fixes an issue with some production boards that have
an older QSPI flash part revision, which can't handle floating pins.
Note those pins can be reconfigured and reused later.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
If a non-string buffer was passed to execfile, then it would be passed
as a non-null-terminated char* to mp_lexer_new_from_file.
This changes mp_lexer_new_from_file to take a qstr instead (as in almost
all cases a qstr will be created from this input anyway to set the
`__file__` attribute on the module).
This now makes execfile require a string (not generic buffer) argument,
which is probably a good fix to make anyway.
Fixes issue #12522.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
That can be caused e.g. by an exception. This feature is implemented in
some way already for the stm32, renesas-ra, mimxrt and samd ports. This
commit adds it for the rp2, esp8266, esp32 and nrf ports. No change for
the cc3200 and teensy ports.
Signed-off-by: robert-hh <robert@hammelrath.com>
For consistency with other Python-level modules.
Also add the corresponding missing preprocessor guard to esp32/modespnow.c,
so that this port compiles if MICROPY_PY_ESPNOW and MICROPY_PY_NETWORK_WLAN
are set to 0.
Fixes#12622.
Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
led_init() was not called, and therefore the machine.LED class seemed not
to work. led_init() now uses mp_hal_pin_output() to configure the pin.
Signed-off-by: robert-hh <robert@hammelrath.com>
See https://github.com/micropython/micropython/issues/12127 for details.
Previously at the point when a release is made, we update mpconfig.h
and set a git tag. i.e. the version increments at the release.
Now the version increments immediately after the release. The workflow is:
1. Final commit in the cycle updates mpconfig.h to set (X, Y, 0, 0) (i.e.
clear the pre-release state).
2. This commit is tagged "vX.Y.0".
3. First commit for the new cycle updates mpconfig.h to set (X, Y+1, 0, 1)
(i.e. increment the minor version, set the pre-release state).
4. This commit is tagged "vX.Y+1.0-preview".
The idea is that a nightly build is actually a "preview" of the _next_
release. i.e. any documentation describing the current release may not
actually match the nightly build. So we use "preview" as our semver
pre-release identifier.
Changes in this commit:
- Add MICROPY_VERSION_PRERELEASE to mpconfig.h to allow indicating that
this is not a release version.
- Remove unused MICROPY_VERSION integer.
- Append "-preview" to MICROPY_VERSION_STRING when the pre-release state
is set.
- Update py/makeversionhdr.py to no longer generate MICROPY_GIT_HASH.
- Remove the one place MICROPY_GIT_HASH was used (it can use
MICROPY_GIT_TAG instead).
- Update py/makeversionhdr.py to also understand
MICROPY_VERSION_PRERELEASE in mpconfig.h.
- Update py/makeversionhdr.py to convert the git-describe output into
semver-compatible "X.Y.Z-preview.N.gHASH".
- Update autobuild.sh to generate filenames using the new scheme.
- Update remove_old_firmware.py to match new scheme.
- Update mpremote's pyproject.toml to handle the "-preview" suffix in the
tag. setuptools_scm maps to this "rc0" to match PEP440.
- Fix docs heading where it incorrectly said "vvX.Y.Z" for release docs.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Currently on rp2 the time.time_ns() function has only seconds resolution.
This commit makes it have microsecond resolution, by using the output of
time_us_64() instead of the RTC.
Tested that it does not drift from the RTC over long periods of time.
Signed-off-by: Damien George <damien.p.george@gmail.com>
No other network-enabled board has urllib.urequest frozen in to the
firmware, and esp8266 is relatively low on flash, so remove this module.
And (u)requests is already included by bundle-networking.
Signed-off-by: Damien George <damien@micropython.org>
Also remove corresponding commented line from esp8266/boards/manifest.py.
It doesn't have enough flash to have this frozen by default.
Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
Allows using gdb, addr2line, etc. on a "release" ELF file.
No impact to .bin or .uf2 size, only the .elf will get bigger.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The current code assumes all I2Cs are on the same peripheral bus, which is
not true for I2C4 and the same goes for the clock enable code.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
The IDF-provided version of TinyUSB defaults to Espressif's standard
VID:PID unless specific sdkconfig options are present. The numbers
already defined for the CUSTOM_* config options were ignored otherwise.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This removes the duplicate code in cyw43, esp32, esp8266 that implements
the same logic as network.hostname.
Renames the `mod_network_hostname` (where we store the hostname value in
`.data`) to `mod_network_hostname_data` to make way for calling the shared
function `mod_network_hostname`.
And uses memcpy for mod_network_hostname_data, because the length of source
is already known and removes reliance on string data being null-terminated.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This changes from the previous limit of 15 characters. Although DHCP and
mDNS allow for up to 63, ESP32 and ESP8266 only allow 32, so this seems
like a reasonable limit to enforce across all ports (and avoids wasting the
additional memory).
Also clarifies that `MICROPY_PY_NETWORK_HOSTNAME_MAX_LEN` does not include
the null terminator (which was unclear before).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
By clearing the tamper bits and enabling access to the registers for all
code, just in case that this was set. It keeps the clock running on
battery and the calibration setting.
Signed-off-by: robert-hh <robert@hammelrath.com>
Not all boards or BLE extensions have the flow control signals for BLE
available at suitable pins. Actually none of the Adafruit extensions
match for flow control.
For consistency with the previous behaviour it is enabled by default.
Signed-off-by: robert-hh <robert@hammelrath.com>
Commit 552b0bbe12 did not define
MICROPY_PY_MACHINE_SDCARD properly, and thus building the firmware failed.
Signed-off-by: robert-hh <robert@hammelrath.com>
There is a single UART clock for all devices, so switching it for one will
affect all devices used at that time. This commit fixes that issue by
keeping the clock at a fixed value.
This fixed clock still supports the common baud rates between 300 and
921600 baud.
Signed-off-by: robert-hh <robert@hammelrath.com>
This is option is no longer needed as a Makefile option as the USDHC driver
is enabled for all supported series.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
Changes are:
- Disable internal flash storage and use the external QSPI for storage.
- Disable default bootloader entry mode. The bootloader entry function
exists in board_init.c.
- Remove OSC enable/disable macros (this board doesn't have an OSC).
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
This was previously hard-coded to "Micropy" / "Mass Storage" / "1.0".
Now allow it to be overridden by a board.
Also change "Micropy" to "MicroPy" and "1.0" to "1.00" to match stm32.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This was previously hard-coded to "MicroPy" / "pyboard Flash" / "1.00".
Now allow it to be overridden by a board.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Add "CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y" to
ports/esp32/boards/sdkconfig.base so that all micropython esp32 images
support OTA rollback in the bootloader. These images can then be converted
to OTA-capable images as required by user tools.
Also remove CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y from board-specific
sdkconfig files as this is now the default.
Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
While cyw43 is deinitialized, an interrupt occurs. That is handled with
these lines: ports/rp2/mpnetworkport.c#L59-L61 and as pendsv is disabled
while in network code, the poll function then just waits there.
When deinit has finished, the poll func is executed, but skipped:
src/cyw43_ctrl.c#L222-L225 this skips the `CYW43_POST_POLL_HOOK` which
would re-enable interrupts, but also reset `cyw43_has_pending`.
And in that state, the lightsleep code, will skip sleeping as it thinks
there is a network packet pending to be handled.
With this change applied, lightsleep works as expected when the wifi chip
is enabled, and when it's powered off.
Applies to newly-added ARDUINO_PORTENTA_C33 and UM_NANOS3.
Makes the list match the standard features defined in
24a6e951ec.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This was copied from minimal/mpconfigport.h, but it doesn't make sense
for general ports.
Add a comment to minimal/mpconfigport.h to explain why it specifically
overrides it.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This provides a way to build a non-DEBUG host binary that still has symbols
and debug information.
Document this for the unix port, and update a comment in the unix port
Makefile.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This gets the calculation working properly for H5 MCUs, and fixes the
switch statement to switch on csel&7 instead of csel&3.
Signed-off-by: Damien George <damien@micropython.org>
The include of HAL headers should come after the HAL configuration defines,
so that the headers can see whether the defines were made or not, to
provide defaults and configure various things.
Signed-off-by: Damien George <damien@micropython.org>
Damien George
Rene Straub
iabdalkader
robert-hh
Jim Mussared
Glenn Moloney
Angus Gratton
Luca Burelli
Wanlin Wang
vsfos
dotnfc
Felix Dörre
Seon Rozenblum