Commit Graph

13242 Commits

Author SHA1 Message Date
David Lechner e7f6b9f4f7 tools/gen-cpydiff: Skip Black fmt comments.
Since cpydiff is code used as documentation, there are cases where we may
want to use Black's `fmt: on/off/skip` comments to avoid automatic
formatting.  However, we don't want these comments to be distracting in the
generated documentation.

This rewrites the code to omit these comments when generating the docs.

Signed-off-by: David Lechner <david@pybricks.com>
2022-03-25 12:13:00 +11:00
David Lechner e7a92c0e69 tests/cmdline/cmd_showbc: Fix spelling of sequence. 2022-03-25 12:11:17 +11:00
Damien George b083cdba2b examples/embedding: Fix build with updated sys and os modules.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-25 11:47:30 +11:00
Damien George 73623d04d5 github/workflows: Add new workflow to test embedding example.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-25 11:39:00 +11:00
iabdalkader df86cef59a rp2: Allow Overriding cmake frozen manifest from the command line.
If MICROPY_FROZEN_MANIFEST is set from the cmake command line, then it will
override the default and any manifest set by the board.
2022-03-24 22:10:01 +11:00
iabdalkader fe8b47e29f ports: Allow boards to define additional network interfaces. 2022-03-24 17:23:28 +11:00
Damien George 66fe3d5cb5 stm32: Support building for STM32F745.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 16:01:09 +11:00
Andrew Leech bb0ca00b77 stm32/mboot: Verify CRC32 of fsload DFU files before writing. 2022-03-22 15:04:41 +11:00
Andrew Leech bc856a1e29 stm32/mboot: Verify signature of fsload packed DFU files before writing.
When verifying the DFU contents, the signature of signed/encrypted files is
also now checked in this initial, dry-run stage.
2022-03-22 15:04:37 +11:00
Damien George 80055c2cdc stm32/mboot/fwupdate.py: Simplify calculation of CRC32.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 14:14:31 +11:00
Damien George bf89e336b9 stm32/boards/PYBD_SF2: Turn on SD card in mboot init if SD enabled.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 13:33:43 +11:00
Damien George e316306546 stm32/mboot: Add support for reading from SD card.
Tested on PYBV10 and PYBD_SF6, with MBOOT_FSLOAD enabled and programming
new firmware from a .dfu.gz file stored on the SD card.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 13:33:43 +11:00
Damien George 9b07d38c7e stm32/mboot: Add support for 64-bit mboot address space for reads.
If enabled via MBOOT_ADDRESS_SPACE_64BIT (it's disabled by default) then
read addresses will be 64-bit.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 13:33:43 +11:00
Damien George a92d45c3df stm32/mboot: Always check the magic number to enter filesystem loading.
Even if MBOOT_FSLOAD is disabled, mboot should still check for 0x70ad0080
so it can immediately return to the application if this feature is not
enabled.  Otherwise mboot will get stuck in DFU mode.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:49:00 +11:00
Damien George dc91024a73 stm32/mboot: Add pragma for GCC to ignore array bounds warning.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:44:10 +11:00
Damien George f0be0de341 stm32/dma: Add option to disable auto-DMA-turn-off.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:43:53 +11:00
Damien George 63c7593df6 stm32/main: Support SD cards without a partition table.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:41:15 +11:00
Damien George 75d2bfcccf stm32/sdcard: Add sdcard_select_sd/mmc functions.
So that C code can select which of SD or MMC to use.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:38:45 +11:00
Damien George 7a9cf1f0fb stm32/sdcard: Use mp_hal_pin_input instead of HAL function.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:15:36 +11:00
Damien George eef7eae6b2 esp8266/modesp: Remove esp.info() function.
The main functionality of this info function is available via the existing
micropython.mem_info() and micropython.qstr_info() functions.  The printing
of the address space layout doesn't add much and removing esp.info() saves
about 600 bytes.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 11:03:29 +11:00
Damien George 65be5e072f esp8266/mpconfigport.h: Remove config values that are the defaults.
This commit is a no-op in terms of functionality.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 11:03:15 +11:00
Kattni Rembor 61c02e6500 esp32/machine_pin: Expose pin 20 for ESP32.
This pin is available on some ESP32 packages.

Signed-off-by: Kattni Rembor <kattni@adafruit.com>
2022-03-22 10:40:00 +11:00
Algy Tynan afceb56ee2 esp32/boards: Add support for LilyGO LoRa32 boards.
Boards use ESP32-PICO-D4.

Added pins for hardware versions v1.0, v1.2, v1.6 and v2.0.

Signed-off-by: Algy Tynan <algy@tynan.io>
2022-03-22 00:19:36 +11:00
robert-hh 09b55dc297 esp32/machine_hw_spi: Use automatic DMA channel selection for SPI on C3.
Addresses issue #8204.
2022-03-22 00:13:25 +11:00
wemos 1a0bd352d3 esp32/boards: Add LOLIN C3 MINI ESP32-C3 based board. 2022-03-22 00:11:02 +11:00
Jonathan Hogg 3b9de192be esp32/boards/UM_TINYPICO: Remove use of PULL_HOLD.
Change APA102 power handling to not use the (now removed) PULL_HOLD
constant.
2022-03-21 23:59:48 +11:00
Jonathan Hogg 21d0599bd1 esp32/modesp32: Add new gpio_deep_sleep_hold function.
Add a new function to control whether held pins will retain their function
through deep-sleep.

Also document this function and explain how to use this in quickref to
retain pin configuration during deep-sleep.
2022-03-21 23:59:07 +11:00
Jonathan Hogg 7684c996bc esp32/machine_pin: Add new hold keyword argument and remove PULL_HOLD.
The current pull=Pin.PULL_HOLD argument doesn't make a lot of sense in the
context of what it actually does vs what the ESP32 quickref document says
it does.

This commit removes PULL_HOLD and adds a new hold=True|False keyword
argument to Pin()/Pin.init().  Setting this to True will cause the ESP32 to
lock the configuration of the pin – including direction, output value,
drive strength, pull-up/-down – such that it can't be accidentally changed
and will be retained through a watchdog or internal reset.

Fixes issue #8283, and see also #8284.
2022-03-21 23:55:02 +11:00
Jonathan Hogg 5887dfeea6 docs/esp32/quickref: Refine deep-sleep power-saving notes.
This attempts to better explain how pull-ups and pull-downs operate in
deep-sleep mode.
2022-03-21 23:54:41 +11:00
Peter Züger 94a9b50668 mimxrt/mbedtls: Add NULL pointer check in m_free_mbedtls.
Signed-off-by: Peter Züger <zueger.peter@icloud.com>
2022-03-17 13:11:39 +11:00
Peter Züger 95ee29f4f4 stm32/mbedtls: Add NULL pointer check in m_free_mbedtls.
According to the C standard the free(void *ptr) function: if ptr is a null
pointer, no action occurs.

Signed-off-by: Peter Züger <zueger.peter@icloud.com>
2022-03-17 13:11:22 +11:00
iabdalkader a16dcc8136 stm32/boards: Convert F4xx and F7xx to new flash FS config.
Following on from 35e70c1698.

Fixes issue #8390.
2022-03-17 13:06:45 +11:00
Damien George 63f0e700f4 extmod/modure: Set subject begin_line so ^ doesn't match interior.
Fixes issue #8402.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-16 12:21:00 +11:00
Damien George adfd57c5fe lib/re1.5: Distinguish between subject start-of-line and start-of-srch.
Otherwise a repeated sub/split will continue to match ^ to the start of
that search.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-16 12:21:00 +11:00
Damien George 1692cad673 py/showbc: Remove global variables and make DECODE_PTR work correctly.
The bytecode state variables mp_showbc_code_start and mp_showbc_constants
have been removed and made local variables passed into the various
functions.

As part of this, the DECODE_PTR macro is fixed so it extracts the relevant
pointer from the child_table (a regression introduced in
f2040bfc7e).

Signed-off-by: Damien George <damien@micropython.org>
2022-03-16 11:59:46 +11:00
Damien George 962ad8622e py/parse: Handle check for target small-int size in parser.
This means that all constants for EMIT_ARG(load_const_obj, obj) are created
in the parser (rather than some in the compiler).

Signed-off-by: Damien George <damien@micropython.org>
2022-03-16 00:41:10 +11:00
Damien George 3c7cab4e98 py/parse: Put const bytes objects in parse tree as const object.
Instead of as an intermediate qstr, which may unnecessarily intern the data
of the bytes object.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-16 00:41:10 +11:00
Damien George 65851ebb51 py/parse: Simplify handling of const int parse nodes.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-16 00:00:25 +11:00
Damien George eec07332b1 unix/variants: Enable a few optimisations and features on dev, coverage.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 13:34:43 +11:00
Damien George 3c20ddb41a unix/variants: Use rom feature config for standard, dev, coverage.
This change is a no-op in terms of functionality.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 13:32:25 +11:00
Damien George 0ac3191d8c unix/mpconfigport.h: Collect together config options from extra level.
This change is a no-op in terms of functionality.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 13:29:13 +11:00
Damien George ac2293161e py/modsys: Add optional mutable attributes sys.ps1/ps2 and use them.
This allows customising the REPL prompt strings.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 10:58:33 +11:00
Damien George cac939ddc3 py/modsys: Add optional sys.tracebacklimit attribute.
With behaviour as per CPython.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 10:43:21 +11:00
Damien George bc181550a4 py/modsys: Add optional attribute delegation.
To be enabled when needed by specific sys attributes.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 10:43:21 +11:00
Damien George 3356b5ef8d py/objmodule: Support delegating failed attr lookups.
This commit adds generic support for mutable module attributes on built in
modules, by adding support for an optional hook function for module
attribute lookup.  If a module wants to support additional attribute load/
store/delete (beyond what is in the constant, globals dict) then it should
add at the very end of its globals dict MP_MODULE_ATTR_DELEGATION_ENTRY().
This should point to a custom function which will handle any additional
attributes.

The mp_module_generic_attr() function is provided as a helper function for
additional attributes: it requires an array of qstrs (terminated in
MP_QSTRnull) and a corresponding array of objects (with a 1-1 mapping
between qstrs and objects).  If the qstr is found in the array then the
corresponding object is loaded/stored/deleted.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 10:35:44 +11:00
Damien George d470c5a5ba tests/extmod/vfs_posix.py: Only test statvfs if it exists.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 00:41:03 +11:00
Damien George 0149cd6b8b windows: Switch to VFS subsystem and use VfsPosix.
Following the unix port.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 00:26:36 +11:00
Damien George 2b409ef8a4 unix/moduos: Convert module to use extmod version.
All variants now use extmod/moduos.c as their uos module implementation.
In particular this means they all have MICROPY_VFS enabled and use VfsPosix
for their filesystem.

As part of this, the available functions in uos become more consistent with
other ports:
- coverage variant gets uos.urandom
- minimal and standard variant get: unlink, chdir, getcwd, listdir

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 21:13:57 +11:00
Damien George ade2720e55 esp8266/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 11b77263ef stm32/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00