eb09336e99
drivers/display/ssd1306.py: Update to use FrameBuffer not FrameBuffer1
2016-12-01 16:43:25 +11:00
225e22b287
extmod/modframebuf: Make FrameBuffer handle 16bit depth.
...
Rename FrameBuffer1 into FrameBuffer and make it handle different bit
depths via a method table that has getpixel and setpixel. Currently
supported formats are MVLSB (monochrome, vertical, LSB) and RGB565.
Also add blit() and fill_rect() methods.
2016-12-01 16:43:25 +11:00
8b8242954e
extmod/modurandom: Allow to build with float disabled.
2016-11-30 12:58:54 +11:00
c19a395cac
stmhal/adc: Make channel "16" always map to the temperature sensor.
...
The temperature sensor on F4 and F7 MCUs is mostly, but not always, on
channel 16. To retain compatibility across all these MCUs this patch
maps the user-facing channel 16 to the internal temperature sensor.
2016-11-30 12:58:54 +11:00
390ce86a30
stmhal/adc: Add support for F767 MCU.
2016-11-30 12:58:54 +11:00
52dfad0879
stmhal/adc: Add ADCAll.read_vref method, returning "3.3v" value.
2016-11-30 12:58:54 +11:00
e72353cc48
stmhal/adc: Make ADCAll.read_core_temp return accurate float value.
...
It now uses factory calibration values to get a more accurate value, and
returns a float instead of an integer.
2016-11-30 12:58:53 +11:00
87215a0f04
stmhal/adc: Provide more accurate measure of VBAT and VREFINT.
...
By using factory calibration values.
2016-11-30 12:58:53 +11:00
295266178c
zephyr/zephyr_getchar: Update to Zephyr 1.6 unified kernel API.
2016-11-30 01:42:58 +03:00
a6de451a13
zephyr: Add .gitignore to ignore Zephyr's "outdir" directory.
...
That's where Zephyr keeps object files and produced executables.
2016-11-30 00:26:31 +03:00
63e82dcdfe
py/asmthumb: Fix build for F7 MCUs after recent code refactoring.
2016-11-30 00:11:25 +11:00
029f215ead
stmhal/adc: Add "mask" selection parameter to pyb.ADCAll constructor.
...
The "mask" parameter is used to select which pins the ADCAll constructor
will initialise to analog mode. It defaults to all pins (0xffffffff),
which is backwards compatible with previous behaviour.
2016-11-29 14:32:05 +11:00
0d75b0d962
stmhal: Add address parameters to openocd config files.
...
Also make l4 config the default for STM32L476DISC board.
2016-11-28 15:27:36 +11:00
50a2966913
stmhal: Add OpenOCD configuration for STM32L4.
2016-11-28 15:27:36 +11:00
139b891d6d
stmhal: Add back GPIO_BSRRL and GPIO_BSRRH constants to stm module.
...
These were inadvertently removed with a recent upgrade to CMSIS, where
those registers were no longer defined in the CMSIS headers, and hence
no longer extracted.
2016-11-28 15:02:42 +11:00
612599587b
py: Factor out common code from assemblers into asmbase.[ch].
...
All assemblers should "derive" from mp_asm_base_t.
2016-11-28 09:24:50 +11:00
21e1703d37
stmhal: Add support for flash storage on STM32F415.
2016-11-26 16:47:45 +11:00
dbc09d03f6
tests/basics: Enable tests for list slice getting with 3rd arg.
...
Also add a test to check case when 3rd arg is 0.
2016-11-26 16:39:25 +11:00
4c3c515bd1
tests/basics: Change dict_fromkeys test so it doesn't use generators.
...
And then it can run with the native emitter.
2016-11-26 16:38:38 +11:00
e6cf5fb2cc
py/compile: Remove comment about TODO for short circuiting for if-stmt.
...
Short circuiting is handled correctly by c_if_cond, and constants within
short-circuit expressions are optimised by the parser.
2016-11-26 16:15:55 +11:00
a4f96c8c2a
tests/basics: Add tests for if-expressions.
2016-11-26 16:15:31 +11:00
a31a3a9fd5
tests/basics: Add test for dict.fromkeys where arg is a generator.
...
Improves coverage because it tests the case where the arg does not have a
__len__ slot.
2016-11-26 15:38:48 +11:00
f8b71aabb4
stmhal/machine_i2c: Provide HW implementation of I2C peripherals for F4.
...
With this patch machine.I2C() uses HW I2C peripheral blocks on F4 MCUs.
Software I2C is used for other MCUs.
2016-11-25 16:31:43 +11:00
49dcc253e3
stmhal/i2c: Expose the pyb_i2c_obj_t struct and some relevant functions.
...
So they can be used by other parts of the code.
2016-11-25 16:30:51 +11:00
652ca2017d
stmhal/i2c: Add support for I2C4 hardware block on F7 MCUs.
2016-11-25 11:21:18 +11:00
3053748987
stmhal: Add beginnings of port-specific machine.I2C implementation.
...
This allows one to construct an I2C object using ids that are specific
to the stmhal port, eg machine.I2C('X'). Right now the implementation
of I2C uses software I2C but the idea is to just change the C-level I2C
protocol functions to hardware implementations later on.
2016-11-24 00:20:51 +11:00
5d2279bec1
extmod/machine_i2c: Add hook to constructor to call port-specific code.
...
If MICROPY_PY_MACHINE_I2C_MAKE_NEW is defined then it is called when an
I2C object is constructed with an id which is not -1.
2016-11-24 00:12:51 +11:00
8b74048d2a
extmod/machine_i2c: Expose soft I2C obj and readfrom/writeto funcs.
...
For external use by ports if needed.
2016-11-24 00:11:45 +11:00
4c905616f0
extmod/machine_i2c: Remove trivial function wrappers.
2016-11-23 17:05:38 +11:00
37333cb00a
extmod/machine_i2c: Add 'stop' argument to i2c readfrom/writeto meths.
2016-11-23 17:05:38 +11:00
0bc99b4836
extmod/machine_i2c: Make i2c.write[to] methods return num of ACKs recvd.
2016-11-23 17:05:38 +11:00
07e83573c8
extmod/machine_i2c: Add 'nack' argument to i2c.readinto.
2016-11-23 17:05:38 +11:00
ced240e72a
extmod/machine_i2c: Make C-level functions return -errno on I2C error.
2016-11-23 17:05:38 +11:00
946f8dd46f
extmod/machine_i2c: Remove unneeded i2c_write_mem/i2c_read_mem funcs.
2016-11-23 17:05:38 +11:00
96c3911a0a
extmod/machine_i2c: Rewrite mem xfer funcs in terms of C-level protocol.
2016-11-23 17:05:37 +11:00
c81247f1ab
extmod/machine_i2c: Rewrite i2c.scan in terms of C-level protocol.
2016-11-23 17:05:37 +11:00
bc4ea69795
extmod/machine_i2c: Add argument to C funcs to control stop generation.
2016-11-23 17:05:37 +11:00
b983cfaf41
extmod/machine_i2c: Add a C-level I2C-protocol, refactoring soft I2C.
2016-11-23 17:05:37 +11:00
63a5df3cb4
docs/library/machine.I2C: Refine definitions of I2C methods.
2016-11-23 17:05:02 +11:00
a3320e7811
stmhal/i2c: Remove use of legacy I2C_NOSTRETCH_DISABLED option.
...
In the new HAL this is renamed to I2C_NOSTRETCH_DISABLE.
2016-11-22 17:40:50 +11:00
2eff9c29a1
tests/basics: Improve user class coverage.
2016-11-22 15:49:02 +11:00
1b41cacac7
tests/extmod: Improve ujson coverage.
2016-11-22 15:48:42 +11:00
037e6912c6
py/objtype: Implement __call__ handling for an instance w/o heap alloc.
...
By refactoring and reusing code from objboundmeth.
2016-11-22 01:33:55 +03:00
7e820792da
stmhal: Updates to get F411 MCUs compiling with latest ST HAL.
2016-11-21 23:24:24 +11:00
1f43d49f9e
tests/micropython: Move alloc-less traceback test to separate test file.
...
The native emitter doesn't provide proper traceback info so this test
should not be run in that case.
2016-11-21 17:39:23 +11:00
d70f87aaa2
tests/micropython: Add test for creating traceback without allocation.
2016-11-21 17:10:17 +11:00
21d82421cd
stmhal/i2c: Use the HAL's I2C IRQ handler for F7 and L4 MCUs.
...
The custom IRQ handler only works for F4 MCUs, which have the SR1
register.
2016-11-21 16:12:09 +11:00
e30ca0e102
unix/Makefile: Update freedos target for change of USELECT config name.
2016-11-21 15:49:46 +11:00
0d56c65d3e
extmod/moduselect: Fix comment describing endif.
2016-11-21 15:47:48 +11:00
5362bcc487
extmod/machine_mem: Typo fix in comment.
2016-11-21 01:09:17 +03:00
Radomir Dopieralski
Damien George
Paul Sokolovsky
Nicholas Graumann
Dave Hylands
Rami Ali