f522849a4d
cc3200: Add socket.timeout and socket.error exceptions.
2015-07-02 11:53:15 +02:00
70fc42cb28
cc3200: Add CA, certificate and key files to the updater list.
2015-06-30 22:11:15 +02:00
5ebf39784a
cc3200: Correct socket settimeout time format.
2015-06-29 11:01:11 +02:00
4f5b896a0b
cc3200: Adapt update-wipy.py timing to improve stability.
2015-06-28 14:14:24 +02:00
813b581127
cc3200: Add `Pin.name()` method.
2015-06-28 14:14:22 +02:00
778413168b
cc3200: Enable more features to improve compatibility with stmhal.
2015-06-28 14:14:20 +02:00
d02f671737
cc3200: Add deploy target and improve robustness of update-wipy.py.
2015-06-24 15:26:05 +02:00
e64afde073
cc3200: Create tools folder and add update-wipy.py script.
...
This script is used by Jenkins to update the WiPy with the newly
built firmware before running the tests. It's not placed in the
common tools folder because it is very WiPy specific.
2015-06-24 12:36:38 +02:00
92d95cc9d3
cc3200: Remove --specs=nano.specs linker flag.
2015-06-18 09:01:37 +02:00
ea2cc2b907
docs: Add more documentation for the CC3200 in the pyb module.
2015-06-16 15:45:24 +02:00
cdfa11f550
cc3200: In Timer.callback() only use value param if in edge count mode.
2015-06-16 15:34:46 +02:00
f28ed55aeb
cc3200/README.md: Specify the board name in the build command.
2015-06-11 09:26:36 +02:00
b630de1103
cc3200: Rename os.mkdisk() to os.mkfs().
2015-06-10 23:35:45 +02:00
1811c6bccf
cc3200: Remove Timer.AB constant.
...
Timer.A and Timer.B can be ORed for this purpose.
2015-06-10 23:35:43 +02:00
e2dc7ac2a9
cc3200: Clarify notes about the extended functionality of uhashlib.
2015-06-10 23:35:41 +02:00
95cc1ff542
cc3200: Re-name pyb.hard_reset() to pyb.reset().
2015-06-10 23:35:40 +02:00
330e21c986
cc3200: Use the pull up/down resistors on the antenna selection pins.
2015-06-10 23:35:38 +02:00
f960d753e4
cc3200: Fix bootloader build error.
2015-06-10 23:35:36 +02:00
3319780e96
cc3200: Add sendbreak method to the UART.
2015-06-10 23:35:35 +02:00
8a6d93aeed
cc3200: Make UART API more similar to stmhal.
2015-06-10 23:35:33 +02:00
640d00ea9d
cc3200: Change MP_OBJ_NULL for mp_const_none in params default value.
2015-06-10 23:35:32 +02:00
071d47fa3b
cc3200: Only kick the WDT if it's actually running.
2015-06-10 23:35:30 +02:00
6148f8b7d2
cc3200: Add contructor to the HeartBeat class.
2015-06-10 23:35:28 +02:00
371f4ba6b3
cc3200: Wrap antenna_init0() with #if MICROPY_HW_ANTENNA_DIVERSITY.
2015-06-08 10:38:19 +02:00
491c321720
cc3200: Re-config antenna selection when waking from suspended mode.
2015-06-07 13:28:47 +02:00
b4a41a8f70
cc3200: Add missing antenna diversity source files.
2015-06-07 00:42:40 +02:00
a3acaa000c
cc3200: Add antenna selection feature to WLAN.
2015-06-07 00:06:27 +02:00
a3cf4ea2f6
cc3200: Do not kick the watchdog inside the idle task.
2015-06-04 10:13:55 +02:00
71f85cc330
cc3200: Close ftp and telnet server sockets if listening fails.
2015-06-04 10:13:53 +02:00
cc20482aa9
cc3200: Add method to configure the servers timeout.
...
With network.server_timeout(secs) the timeout can be changed.
The default value is 300 secs. Minimmum accpeted is 5 secs.
Without params the function returns the current configured timeout.
2015-06-03 17:31:21 +02:00
2ffb6e1b15
cc3200: Fix 'MP_QSTR_sd' undeclared error when building for the LAUNCHXL.
2015-06-02 13:11:01 +02:00
84d11b5e53
cc3200: Add period set method to the Timer class.
2015-05-29 15:54:46 +02:00
417205623a
cc3200: Fix incorrect type for the wake cause variable.
2015-05-29 15:54:16 +02:00
2f2c0a13fb
cc3200: Clean up WLAN API. Make WLAN.info() an attrtuple.
2015-05-29 15:48:41 +02:00
622f241317
cc3200: Rename pyb.reset() to pyb.hard_reset() and add pyb.unique_id().
2015-05-29 10:22:20 +02:00
78744c4f7a
cc3200: Remove WIPY-SD variant, and make the WiPy the default board.
2015-05-28 13:22:26 +02:00
2abb58d758
cc3200: Rename Pin.get_config() to Pin.info().
2015-05-28 13:10:46 +02:00
1580e331ef
cc3200: Make small changes in WLAN to improve the API.
2015-05-28 13:10:44 +02:00
c754d8011d
cc3200: Simplify SPI polarity and phase checks in constructor.
2015-05-27 09:45:32 +02:00
95104b0fbd
cc3200: Add note about old revisions of the CC3200-LAUNCHXL.
2015-05-27 09:45:30 +02:00
d07de2d307
cc3200: Move the STDIO UART pin configuration to mpconfigboard.h.
2015-05-27 09:45:29 +02:00
9414f92fa9
cc3200: Fix I2C and SPI module references.
2015-05-27 09:45:27 +02:00
8096be089e
cc3200: Add make_new method to the WDT.
2015-05-27 09:45:25 +02:00
fca3493442
cc3200: Add make_new method to the RTC, like in stmhal.
2015-05-27 09:45:24 +02:00
5a0c5f8fea
cc3200: Use the WDT stall feature in debug mode only.
2015-05-27 09:45:22 +02:00
ec1f0e7551
cc3200: Use MCU reset instead of SOC reset.
...
I have seen the CC3200 hanging a couple of times, and according to TI
itself the SOC reset is not reliable, which explains my observations.
2015-05-27 09:45:21 +02:00
fabe79f7af
cc3200: Clean up exception handling.
2015-05-26 12:29:20 +02:00
124aa000af
cc3200: Use polarity and phase instead of submode in the SPI construct.
2015-05-26 11:30:48 +02:00
2dd47239de
cc3200: Make API more similar to stmhal.
...
In general the changes are:
1. Peripheral (UART, SPI, ADC, I2C, Timer) IDs start from 1, not zero.
2. Make I2C and SPI require the ID even when there's only one bus.
3. Make I2C and SPI accept 'mode' parameter even though only MASTER
is supported.
2015-05-25 21:47:19 +02:00
6545336206
cc3200: Make the WDT aware of the servers sleep/wake state.
2015-05-25 21:14:54 +02:00
5cd34aca27
cc3200: Use the correct ADC channel index when creating the object.
2015-05-25 21:14:46 +02:00
95f19b4542
cc3200: Remove duplicated checks for boot.py and main.py existency.
2015-05-25 21:14:39 +02:00
90d7c4ef3d
cc3200: Make HeartBeat.disable() thread safe.
2015-05-25 21:14:31 +02:00
3cb804de26
cc3200: Remove NIC abstraction layer.
...
That layer is nice, but the CC3200 doesn't need it and getting rid of
it saves ~200 bytes, which are more than welcome.
2015-05-24 11:44:08 +02:00
9f8c5456be
cc3200: Reset the servers and close user sockets on WLAN disconection.
...
This is needed to avoid half-open connections.
2015-05-24 11:44:06 +02:00
ed56b0baba
cc3200: Finally unlock the full wake on WLAN feature set.
2015-05-22 19:53:33 +02:00
18030bd85d
cc3200: Add own ubinascii module.
...
The reason to have our owm ubinascii module is so that later we
can add crc32 support using the hardware engine.
2015-05-22 09:56:11 +02:00
7506db4ccb
cc3200: Remove uhashlib.hexdigest().
2015-05-21 18:51:57 +02:00
e800db562f
cc3200: Add uhashlib. Supports SHA1 and SHA256.
2015-05-20 11:44:24 +02:00
5e38b48dd6
cc3200: Fix time.localtime() so that it returns the correct fields.
2015-05-20 11:44:22 +02:00
56053c37cf
cc3200: Rewrite WLAN.ifconfig(). Add WLAN.info() and WLAN.connections().
2015-05-20 11:44:21 +02:00
514ba15d6a
cc3200: Disable UCTYPES and enable ARRAY_SLICE_ASSIGN.
2015-05-20 11:44:19 +02:00
6f848b6dba
cc3200: Set the timer edge count interrupt value in the calbback const.
2015-05-17 16:11:12 +02:00
95a4f61499
cc3200: Make sure RTC wake value is >= 1ms.
2015-05-17 16:09:27 +02:00
c27dc38e85
cc3200: Re-name 'intmode' to 'mode' in the callback API.
2015-05-17 14:49:17 +02:00
cd3f2523f1
cc3200: Disable WLAN.urn() by default.
...
Can be enabled by defining MICROPY_PORT_WLAN_URN=1 in mpconfigport.h.
2015-05-17 14:20:24 +02:00
a379b6ed11
cc3200: Add optional timeout param to WLAN.connect().
2015-05-17 14:05:44 +02:00
fb9e4cf463
cc3200: Make sure to handle all pending pin interrupts.
...
When entering the interrupt handler of a given GPIO port, more than
one pin could have pending interrupts, therefore care must be taken
to service each interrupt one by one before leaving.
2015-05-17 13:42:15 +02:00
8e611e8414
cc3200: Add Timer module. Supports free running, PWM and capture modes.
2015-05-17 12:34:49 +02:00
9466e154b4
cc3200: Fix power mode param check in the UART callback constructor.
2015-05-17 12:26:40 +02:00
2b62707051
cc3200: Add os.rename()
2015-05-17 12:22:17 +02:00
1db4253886
lib: Move time utility functions to common library.
2015-05-13 00:12:54 +01:00
c50772d19f
py: Add mp_obj_get_int_truncated and use it where appropriate.
...
mp_obj_get_int_truncated will raise a TypeError if the argument is not
an integral type. Use mp_obj_int_get_truncated only when you know the
argument is a small or big int.
2015-05-12 23:05:53 +01:00
2bdefea9d6
cc3200: Enable MICROPY_MODULE_WEAK_LINKS.
2015-05-07 12:19:31 +02:00
e04aa96b4d
cc3200: Define MICROPY_CPYTHON_COMPAT=0.
...
This only disables some corner case functionality to keep C Python
compatibility, and saves ~600 bytes.
2015-05-05 11:23:06 +02:00
04ee5983fe
lib: Move some common mod_network_* functions to lib/netutils.
2015-05-04 11:48:40 +01:00
8c8d7f3c60
cc3200: Clean up pyb.Pin
...
Remove unused and unneeded functions, also create Pin.get_config() that
returns the whole configuration of the pin.
This reduces code size by ~500 bytes.
2015-05-03 11:26:56 +02:00
e4c899a08c
cc3200: WLAN.ifconfig returns an attrtuple instead of a dictionary.
2015-05-03 11:26:25 +02:00
f54bdecff2
cc3200: Implement Sleep.wake_reason()
2015-05-03 11:21:14 +02:00
71d482df47
cc3200: Clear the pending interrupt flag when disabling RTC callbacks.
2015-05-03 11:21:12 +02:00
6f218d7472
cc3200: Move wlan_init0() to the boot section.
...
This one creates a semaphore, therefore it must be executed only
after a hard reset (or when coming out of hibernation).
2015-04-29 16:10:40 +02:00
d8713d78f5
cc3200: Correct Sleep module name. Must be 'Sleep', not 'sleep'.
2015-04-29 15:27:28 +02:00
e282884e54
cc3200: When requesting safe boot, blink the led 3 times, not 4.
2015-04-29 15:27:21 +02:00
dbb4aef5e3
cc3200: Make WLAN.isconnected() also work in AP mode.
...
While in STA mode isconnected() returns True when connected to an AP
and the IP has been acquired. In AP mode, WLAN.isconnected() returns
True if at least one connected station is present.
2015-04-29 15:26:21 +02:00
bf4576dc91
cc3200: Clean-up servers enable/disable algorithm.
2015-04-29 14:25:44 +02:00
95f53461c2
py: Replace py-version.sh with makeversionhdr.py, written in Python.
...
Also rename py-version.h to mpversion.h for consistency with mpconfig.h.
2015-04-28 23:52:36 +01:00
d11317bcab
cc3200: Make WLAN scan results a list of attrtupple.
...
Each result is displayed like this:
ssid='MySSID', bssid=b'\xc0J\x00z.\xcc', security=2, channel=None, rssi=-74
The CC3200 doesn't provide channel info, that why is 'None'.
2015-04-29 00:04:01 +02:00
5225e29ce7
cc3200: Remove unneeded -lgcc in Makefile.
2015-04-29 00:03:58 +02:00
f81684141e
cc3200: Implement os.uname() to get details of the OS and hardware.
2015-04-29 00:03:56 +02:00
6fefd5d330
cc3200: Move telnet_process_credential with the other private functions.
...
Just for consistency.
2015-04-29 00:03:54 +02:00
f1ed8c8a2e
cc3200: Improve telnet_parse_input() in case of an incomplete option.
2015-04-28 16:48:33 +02:00
0458833072
cc3200: Make telnet login procedure work with Tera Term.
...
This is actually a workaround Ter Term's issue of not obeying to the
telnet options that the server is sending. Therefore, we must buffer
chars until either a '\r' or the max length of the username/password
is received.
2015-04-28 16:48:26 +02:00
9fbc265eb8
cc3200: Add delays to allow the servers to start and stop properly.
2015-04-28 15:16:33 +02:00
d34c4784a5
cc3200: Select NIC when the socket is created.
...
This makes sense since only WLAN is supported here.
2015-04-28 15:14:36 +02:00
7c8b4c1a8b
cc3200: Correct MAKE_SOCKADDR and UNPACK_SOCKADDR byte order.
2015-04-25 23:36:45 +02:00
eaefc8b9d6
cc3200: Add WiPy specific information to README.md
2015-04-22 21:03:10 +02:00
df5d9c77f4
cc3200: Fix bootloader and modpyb after printf overhaul.
...
The bootloader needs string0.c because of memset, memcpy and others,
without string0.c it magically links, but calling any of those
functions results in a hard fault.
In debug mode, modpyb needs printf, and including stdio.h leads to
conflicts due to the redefinitions made in the simplelink drivers.
2015-04-19 20:59:10 +02:00
259eaab9a9
cc3200: Clean up and reduce use/include of std.h.
2015-04-18 14:29:28 +01:00
c1a77a0c9f
cc3200: Use new %q format to print qstr's where appropiate.
2015-04-17 10:15:55 +02:00
2cd247e819
cc3200: Clean up bootloader makefile and remove superflous assert.
2015-04-17 09:55:24 +02:00
a86d40ccd4
cc3200: Get bootloader compiling with latest overhaul of printf code.
2015-04-16 14:30:17 +00:00
7f9d1d6ab9
py: Overhaul and simplify printf/pfenv mechanism.
...
Previous to this patch the printing mechanism was a bit of a tangled
mess. This patch attempts to consolidate printing into one interface.
All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf. All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.
Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform. The former is only used when MICROPY_PY_IO is defined.
With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...). Code size is also reduced by around 200 bytes on
Thumb2 archs.
2015-04-16 14:30:16 +00:00
4c37489f4c
cc3200: Correct the IP address byte order in the FTP server.
2015-04-14 01:57:29 +02:00
f7a26472af
cc3200: Add IPPROTO_SEC to be able to create secure sockets.
2015-04-14 01:57:27 +02:00
99f7184073
cc3200: Disable MICROPY_COMP_TRIPLE_TUPLE_ASSIGN.
...
Because it's only a compiler optimization and increases code size.
2015-04-13 00:03:41 +02:00
c69b4310c8
cc3200: Add WLAN.config_ip().
...
This new method allows to assign an static IP to the device.
2015-04-13 00:02:56 +02:00
d278e49475
cc3200: Enable TRIPLE_TUPLE_ASSIGN and UBINASCII.
2015-04-11 13:35:07 +02:00
6e25d955f4
cc3200: Enable long filename support in FatFS.
...
This has implications all over the place. I have to admit that
you can instantly see that usability improves, but it costs 3K.
At the same time I took the oportunity to rename the '/SFLASH'
drive to '/flash' which improves compatibility with the pyboard.
2015-04-11 13:35:05 +02:00
18bd51707c
cc3200: Enable the stdio UART for the LaunchXL only.
2015-04-07 12:12:16 +02:00
c7acfc90b9
cc3200: Enable pull-ups for the STDIO UART pins.
2015-04-07 10:50:20 +02:00
96b60ed956
cc3200: Fix typo after previous refactor.
2015-04-05 22:32:41 +03:00
3a84c8b58d
string0.c: Move from stmhal/ to lib/.
2015-04-05 21:57:55 +03:00
b9d850227d
cc3200: Add WLAN AP specific settings for each board.
2015-04-04 22:09:55 +02:00
d460a30711
cc3200: Add specific version file for the CC3200 port.
...
Current version has been numbered as 0.9.0 since Timers/PWM support
is still missing.
2015-03-31 14:34:09 +02:00
3f42f32648
cc3200: Remove duplicated code from moduos.
...
Error reporting is also changed from detailed to terse, as with the
rest of the CC3200's modules. All this combined saves ~200 bytes.
2015-03-31 14:34:07 +02:00
7b19e99edd
lib: Update FatFs to R0.11.
...
There are lots of cosmetic changes, but this release brings a very
important bug fix:
- Fixed f_unlink() does not remove cluster chain of the file.
With R0.10c if you try to write a file that is too large to fit in the
free space of the drive, the operation fails, you delete the incomplete
file, and it seems to be erased, but the space is not really freed,
because any subsequent write operations fail because the drive is
"still" full. The only way to recover from this is by formatting the
drive. I can confirm that R0.11 fixes the problem.
2015-03-29 22:12:14 +01:00
1eba62cac9
cc3200: Remove unneeded SPI instruction in the simplelink driver.
...
Setting the word count before a SPI transaction is only needed when
using DMA.
2015-03-26 20:50:39 +01:00
1826036a83
cc3200: Increase main stack size to 2K.
...
Increasing it from 1K to 2K gives more freedom to the callback
handlers, before this, simply nesting a function call into a
printf would cause a stack overflow.
2015-03-26 20:50:38 +01:00
760a6eca9b
cc3200: Minor refactorings on modwlan and pybsleep.
2015-03-26 14:27:21 +01:00
4be44014ab
cc3200: Reenable active interrupts when waking from suspended mode.
2015-03-26 13:58:58 +01:00
2d717ad97a
cc3200: Add callback support to the UART for RX interrupts.
2015-03-26 10:28:43 +01:00
e909e38871
cc3200: Remove superflous parameters from the SPI API.
2015-03-26 10:28:41 +01:00
7f41f650de
cc3200: Remove superflous params from the I2C API.
2015-03-25 16:56:14 +01:00
26d230419c
cc3200: Add GPIO25 to the pins list of the WiPy and the WiPy-SD.
...
This allows to properly initialize the system led and add it
to the sleep module so that it can be restored when resuming
from suspended mode.
2015-03-25 15:22:32 +01:00
4729a212b1
cc3200: Rename the WiPy_SD to WiPy-SD.
2015-03-25 15:22:27 +01:00
684dba40f0
cc3200: Roll back to the previous telnet and ftp timeouts.
...
Unfortunately, these timeouts are the only realiable way (for now), to
be able to detect broken connections due to half-open sockets. Such a
thing occurs when getting out of the WiFi coverage area or when
disconnecting from the AP (sometimes the client doesn't send the
disconnect packet).
2015-03-25 15:22:21 +01:00
e15f8198bc
cc3200: Keep WLAN enabled during the soft reset.
2015-03-25 15:22:16 +01:00
9d3588f2be
cc3200: Remove the cc3200.xml file. Latest CCS already ships with it.
2015-03-25 15:22:11 +01:00
104a867447
cc3200: Fix bug in telnet that caused the rx buffer to overflow.
2015-03-22 11:32:12 +01:00
59f6831336
cc3200: Reduce soft reset time. WLAN is not reinit, just reenabled.
2015-03-21 11:31:29 +01:00
77791b5633
cc3200: Improve usability and robustness of the servers.
2015-03-21 11:31:17 +01:00
c1c23e2f6a
cc3200: Remove superfluous code in pybsleep.
2015-03-21 11:27:26 +01:00
cd9bc14c8f
cc3200: Add SPI module.
...
Only MASTER mode is supported. Transfer width is configurable to
8, 16 or 32 bits.
2015-03-21 11:26:47 +01:00
c45e641c1d
cc3200: Re-name pybsystick to mpsystick.
2015-03-21 11:21:45 +01:00
f8ee88bbe0
cc3200: Move server methods from WLAN to the network module.
2015-03-19 17:08:25 +01:00
0e96d1b3f1
cc3200: Add parameter to wlan_stop() for custom timeout values.
2015-03-18 21:55:08 +01:00
f382f4442e
cc3200: Fixes and improvements to the SD card driver.
2015-03-18 21:55:02 +01:00
963d7c7ee6
cc3200: Refactor I2C. Remove all references to SLAVE mode.
2015-03-18 21:54:41 +01:00
d3912549a3
cc3200: Improve I2C timeout handling.
2015-03-18 21:54:30 +01:00
005a7f4190
cc3200: Fix extint_enable behaviour when the callback is updated.
2015-03-17 13:26:09 +01:00
181fe5016c
cc3200: Add RTC callback with wake-up from sleep capability.
2015-03-17 13:26:08 +01:00
6de1b39368
cc3200: Make peripheral objects static.
...
This prevents duplication of objects in the sleep list. Also helps
with reducing the code size by ~100 bytes.
2015-03-17 13:26:07 +01:00
fcf6db0695
cc3200: Register pybsd with the sleep module and use pin_config().
2015-03-17 13:26:06 +01:00
98b8568362
cc3200: Assign GPIO10 and GPIO11 to the GPIO peripheral on start-up.
2015-03-17 13:26:05 +01:00
ea43fa104e
cc3200: Remove unneeded functions and add pybsleep_remove() calls.
2015-03-17 13:26:03 +01:00
78d7c45b69
cc3200: Disable all wake sources on start-up.
2015-03-16 00:42:16 +01:00
ed20ac56f7
cc3200: Fix bug in RTC msec register access functions.
2015-03-16 00:42:15 +01:00
5dd8ae6b9c
cc3200: Fix spaces aligment in LAUNCHXL/mpconfigboard.h
2015-03-16 00:42:13 +01:00
0962358026
cc3200: Align SD card driver with new SDK release(1.1.0).
2015-03-16 00:42:13 +01:00
1080802e8f
cc3200: Update socket event handler to align with new SDK(1.1.0) API.
2015-03-16 00:42:11 +01:00
dc545d6512
cc3200: Do not reset the DTHE module before every SHA operation.
...
According to the new SDK (1.1.0) this is not needed, and it's best
not to do it, because this module is a shared resource.
2015-03-16 00:42:10 +01:00
b2cb75efb7
cc3200: Remove double administration of callback objects.
2015-03-16 00:42:09 +01:00
c292632b59
cc3200: Update simplelink SPI driver to SDK release version 1.1.0.
2015-03-16 00:42:06 +01:00
0d0646d915
cc3200: Update HAL to SDK release version 1.1.0.
2015-03-16 00:42:05 +01:00
2c103d5200
cc3200: Rewrite the PRCM RTC functionality methods.
...
This allows to use the On-Chip retention registers for both the
RTC and to share notification flags between the bootloader and the
application. The two flags being shared right now are the "safe boot"
request and the WDT reset cause. we still have 2 more bits free for
future use.
2015-03-14 10:08:47 +01:00
d432bcb9ac
cc3200: Prevent multiple memory allocations if sflash init fails.
2015-03-14 10:08:46 +01:00
2ae17def52
cc3200: Clean up linker scripts and startup file.
2015-03-14 10:08:45 +01:00
09721e2314
cc3200: Increase heartbeat period from 3 to 5 seconds.
2015-03-14 10:08:44 +01:00
c7fabe1f3e
cc3200: Remove unneeded code from modwlan and optimize startup time.
...
These changes also help reduce the hibernate wake-up time to 1s.
2015-03-14 10:08:43 +01:00
04749e677f
cc3200: Allow separate selection of the power mode in Pin callbacks.
2015-03-12 16:22:17 +01:00
10f7ef0832
cc3200: Keep WLAN enabled during suspend mode.
2015-03-12 16:22:16 +01:00
d1ba8b7659
cc3200: Correct WiPy's pinout and the pin generation script.
2015-03-12 16:22:15 +01:00
6ae9383f63
cc3200: Remove WLAN.getmode since it's superseded by WLAN.ifconfig.
2015-03-12 16:22:13 +01:00
37337427c3
cc3200: Trigger a new network scan when WLAN.scan() is called.
2015-03-12 16:22:12 +01:00
b761ed2103
cc3200: Register ADC and I2C with the sleep module.
2015-03-11 22:09:52 +01:00
db0580d0a5
cc3200: Reduce stack sizes of simplelink and the servers.
2015-03-11 22:09:51 +01:00
e9786f40f5
cc3200: Disable WLAN in suspended mode if NW wake is not enabled.
2015-03-11 17:11:10 +01:00
8cbbaa052a
cc3200: Add WiPy and WiPy_SD board support.
2015-03-11 17:00:38 +01:00
9e44383e3f
cc3200: Add power management framework. Add mpcallback class.
...
Supports suspend and hibernate modes. Waking is possible throug GPIO
and WLAN.
The mpcallback class is generic and can be reused by other classes.
2015-03-11 17:00:33 +01:00
73aee8da54
cc3200: Merge ExtInt class into Pin class.
...
Also add another method to change the pin's interrupt mode
on the fly.
2015-03-11 17:00:28 +01:00
26cbc91373
cc3200: Place functions only used while booting in a special section.
...
Such functions are never used after MicroPython has started, and they
remain in RAM wasting space. Now they are placed in a special section
named "boot" which sits just before the heap, allowing us to extend
the effective heap area up to the new boot section. Right now, this
gives us back ~1K, but in the future, more functions might end up in
there as well.
2015-03-11 16:59:29 +01:00
02fda44a30
cc3200: Combine and disable sections in startup_gcc.c to reduce size.
2015-03-11 16:54:14 +01:00
d226dd2f59
cc3200: Add preliminary low power deep sleep support.
2015-03-11 16:54:09 +01:00
0475de1350
cc3200: Make WDT and HeartBeat constant objects on their own right.
2015-03-11 16:54:05 +01:00
d01060241a
cc3200: Add heartbeat signal on system led.
2015-02-28 19:03:21 +01:00
6a41bf99bd
cc3200: Create separate release/debug build directories
2015-02-28 19:03:17 +01:00
74589cbeeb
cc3200: Move code that disables/enables servers to wlan_sl_enable().
2015-02-26 11:19:15 +01:00
5330d8996f
cc3200: Modify simplelink FreeRTOS OSI layer to only use semaphores.
...
Before, both mutexes and semaphores were used. Using only the latter
and with a bit of cleanup to remove some code bloat, we save ~600
bytes of code.
2015-02-26 11:18:18 +01:00
f3661d4100
cc3200: Change PRCM_PeriphRegs_t fields to unsigned char.
...
This helps saving ~300 bytes. Thanks to dpgeorge.
2015-02-25 23:25:23 +01:00
7a074a14ce
cc3200: Implement safe boot pin and system led behaviour.
...
The safe boot pin, when pulled high during reset rolls back the
firmware to the "factory" image and skips execution of 'boot.py'
and 'main.py'. This is useful to recover from a crash condition.
The system led is used mostly to signal errors.
2015-02-25 23:17:17 +01:00
8a5aee103d
cc3200: Fix md5 application signing, add missing accents.
2015-02-25 23:17:12 +01:00
11aa6ba456
cc3200: Add WDT functionality as part of the pyb module.
...
Also improve pybsd, and make it save it's pin configuration.
This is a necessary step towards supporting the CC3200 low
power deep sleep (LPDS) mode.
2015-02-25 11:37:29 +01:00
fe2eb5f58a
cc3200: Update README.md to add step for flashing the bootloader.
2015-02-25 11:36:56 +01:00
70b3160871
cc3200: Introduce MICROPY_PORT_HAS_TELNET and MICROPY_PORT_HAS_FTP.
...
These definitions help on making modwlan.c usable by other ports
with the CC3100.
2015-02-23 15:02:57 +01:00
379a3fa305
cc3200: Change UART.print() to make it consistent with the rest.
2015-02-23 15:02:55 +01:00
88b7f52ebb
cc3200: Replace WLAN.get_ip() with WLAN.ifconfig().
...
Also change other methods' names to make them consistent.
2015-02-23 15:02:55 +01:00
44bb616b53
cc3200: Add simplelink non-os task calls.
2015-02-22 18:59:50 +01:00
4bfc491753
cc3200: Add wlan_urn() thanks to Nadim El-Fata and Bryan Morrissey.
2015-02-22 18:43:01 +01:00
0c11b167a7
cc3200: Add optimization flags to drivers/cc3100 in the debug build.
2015-02-22 17:50:52 +01:00
33ddb566a7
cc3200: Remove dependencies from FreeRTOS.
...
Use the simplelink wrappers instead. This is one step further
towards having a single module for the cc3200 and the cc3100.
2015-02-22 17:50:50 +01:00
3611c1de14
drivers/cc3100: Remove dependence on debug.h.
2015-02-21 22:04:07 +00:00
92ea99a0fb
cc3200: Add support for connecting to WEP secured networks.
2015-02-21 22:27:54 +01:00
18605b36dc
cc3200: Rename SD.config() to SD.config_pins().
2015-02-21 22:27:48 +01:00
7102e51506
cc3200: Add UART __del__ method.
2015-02-21 22:27:44 +01:00
a7208bcc43
cc3200: Remove sd paths from sys path when disabling the sd card.
2015-02-21 22:27:39 +01:00
5ca1f5f9d9
cc3200: Get compiling with CC3100 driver from drivers/ directory.
2015-02-21 19:55:57 +00:00
49c2ad4fb4
cc3200: Move CC3100 driver from cc3200/simplelink to drivers/cc3100.
...
This commit will not build, it exists just to track changes.
2015-02-21 19:52:07 +00:00
36e2845e36
cc3200: Replace physical tabs with spaces.
...
Preparing this to move to drivers/ directory, want to make it as similar
to original code from TI as possible.
2015-02-21 19:48:34 +00:00
4a23a01945
cc3200: Add explicit py/ path-prefix for py includes.
...
This is how it should be, so one knows exactly where the includes are
coming from.
2015-02-21 18:58:43 +00:00
59d14914cd
cc3200: Correct pybsd_config() params retrieval.
2015-02-21 14:26:38 +01:00
Daniel Campora
Josef Gajdusek
Damien George
Matt Anderson
Paul Sokolovsky
danicampora
Johan Hendriks