Tasmota/sonoff/settings.ino

793 lines
27 KiB
Arduino
Raw Normal View History

/*
settings.ino - user settings for Sonoff-Tasmota
Copyright (C) 2018 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef DOMOTICZ_UPDATE_TIMER
#define DOMOTICZ_UPDATE_TIMER 0 // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds) (Optional)
#endif
#ifndef EMULATION
#define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)
#endif
2018-01-07 14:15:01 +00:00
#ifndef MTX_ADDRESS1 // Add Display Support for up to eigth Matrices
2018-01-07 13:56:23 +00:00
#define MTX_ADDRESS1 0
2018-01-07 14:15:01 +00:00
#endif
#ifndef MTX_ADDRESS2
2018-01-07 13:56:23 +00:00
#define MTX_ADDRESS2 0
2018-01-07 14:15:01 +00:00
#endif
#ifndef MTX_ADDRESS3
2018-01-07 13:56:23 +00:00
#define MTX_ADDRESS3 0
2018-01-07 14:15:01 +00:00
#endif
#ifndef MTX_ADDRESS4
2018-01-07 13:56:23 +00:00
#define MTX_ADDRESS4 0
2018-01-07 14:15:01 +00:00
#endif
#ifndef MTX_ADDRESS5
2018-01-07 13:56:23 +00:00
#define MTX_ADDRESS5 0
2018-01-07 14:15:01 +00:00
#endif
#ifndef MTX_ADDRESS6
2018-01-07 13:56:23 +00:00
#define MTX_ADDRESS6 0
2018-01-07 14:15:01 +00:00
#endif
#ifndef MTX_ADDRESS7
2018-01-07 13:56:23 +00:00
#define MTX_ADDRESS7 0
2018-01-07 14:15:01 +00:00
#endif
#ifndef MTX_ADDRESS8
2018-01-07 13:56:23 +00:00
#define MTX_ADDRESS8 0
#endif
#ifndef HOME_ASSISTANT_DISCOVERY_ENABLE
#define HOME_ASSISTANT_DISCOVERY_ENABLE 0
#endif
#ifndef LATITUDE
#define LATITUDE 48.858360 // [Latitude] Your location to be used with sunrise and sunset
#endif
#ifndef LONGITUDE
#define LONGITUDE 2.294442 // [Longitude] Your location to be used with sunrise and sunset
#endif
/*********************************************************************************************\
* RTC memory
\*********************************************************************************************/
#define RTC_MEM_VALID 0xA55A
uint32_t rtc_settings_crc = 0;
uint32_t GetRtcSettingsCrc()
{
uint32_t crc = 0;
uint8_t *bytes = (uint8_t*)&RtcSettings;
for (uint16_t i = 0; i < sizeof(RTCMEM); i++) {
crc += bytes[i]*(i+1);
}
return crc;
}
void RtcSettingsSave()
{
if (GetRtcSettingsCrc() != rtc_settings_crc) {
RtcSettings.valid = RTC_MEM_VALID;
ESP.rtcUserMemoryWrite(100, (uint32_t*)&RtcSettings, sizeof(RTCMEM));
rtc_settings_crc = GetRtcSettingsCrc();
#ifdef DEBUG_THEO
AddLog_P(LOG_LEVEL_DEBUG, PSTR("Dump: Save"));
RtcSettingsDump();
#endif // DEBUG_THEO
}
}
void RtcSettingsLoad()
{
ESP.rtcUserMemoryRead(100, (uint32_t*)&RtcSettings, sizeof(RTCMEM));
#ifdef DEBUG_THEO
AddLog_P(LOG_LEVEL_DEBUG, PSTR("Dump: Load"));
RtcSettingsDump();
#endif // DEBUG_THEO
if (RtcSettings.valid != RTC_MEM_VALID) {
memset(&RtcSettings, 0, sizeof(RTCMEM));
RtcSettings.valid = RTC_MEM_VALID;
RtcSettings.energy_kWhtoday = Settings.energy_kWhtoday;
RtcSettings.energy_kWhtotal = Settings.energy_kWhtotal;
for (byte i = 0; i < MAX_COUNTERS; i++) {
RtcSettings.pulse_counter[i] = Settings.pulse_counter[i];
}
RtcSettings.power = Settings.power;
RtcSettingsSave();
}
rtc_settings_crc = GetRtcSettingsCrc();
}
boolean RtcSettingsValid()
{
return (RTC_MEM_VALID == RtcSettings.valid);
}
/*********************************************************************************************\
* Config - Flash
\*********************************************************************************************/
extern "C" {
#include "spi_flash.h"
}
#include "eboot_command.h"
extern "C" uint32_t _SPIFFS_end;
// From libraries/EEPROM/EEPROM.cpp EEPROMClass
#define SPIFFS_END ((uint32_t)&_SPIFFS_end - 0x40200000) / SPI_FLASH_SEC_SIZE
// Version 4.2 config = eeprom area
#define SETTINGS_LOCATION SPIFFS_END // No need for SPIFFS as it uses EEPROM area
// Version 5.2 allow for more flash space
#define CFG_ROTATES 8 // Number of flash sectors used (handles uploads)
uint16_t settings_crc = 0;
uint32_t settings_location = SETTINGS_LOCATION;
uint8_t *settings_buffer = NULL;
/********************************************************************************************/
/*
* Based on cores/esp8266/Updater.cpp
*/
void SetFlashModeDout()
{
uint8_t *_buffer;
uint32_t address;
eboot_command ebcmd;
eboot_command_read(&ebcmd);
address = ebcmd.args[0];
_buffer = new uint8_t[FLASH_SECTOR_SIZE];
if (ESP.flashRead(address, (uint32_t*)_buffer, FLASH_SECTOR_SIZE)) {
if (_buffer[2] != 3) { // DOUT
_buffer[2] = 3;
if (ESP.flashEraseSector(address / FLASH_SECTOR_SIZE)) ESP.flashWrite(address, (uint32_t*)_buffer, FLASH_SECTOR_SIZE);
}
}
delete[] _buffer;
}
void SettingsBufferFree()
{
if (settings_buffer != NULL) {
free(settings_buffer);
settings_buffer = NULL;
}
}
bool SettingsBufferAlloc()
{
SettingsBufferFree();
if (!(settings_buffer = (uint8_t *)malloc(sizeof(Settings)))) {
AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_UPLOAD_ERR_2)); // Not enough (memory) space
return false;
}
return true;
}
uint16_t GetSettingsCrc()
{
uint16_t crc = 0;
uint8_t *bytes = (uint8_t*)&Settings;
for (uint16_t i = 0; i < sizeof(SYSCFG); i++) {
if ((i < 14) || (i > 15)) { crc += bytes[i]*(i+1); } // Skip crc
}
return crc;
}
void SettingsSaveAll()
{
if (Settings.flag.save_state) {
Settings.power = power;
} else {
Settings.power = 0;
}
XsnsCall(FUNC_SAVE_BEFORE_RESTART);
SettingsSave(0);
}
/*********************************************************************************************\
* Config Save - Save parameters to Flash ONLY if any parameter has changed
\*********************************************************************************************/
uint32_t GetSettingsAddress()
{
return settings_location * SPI_FLASH_SEC_SIZE;
}
void SettingsSave(byte rotate)
{
/* Save configuration in eeprom or one of 7 slots below
*
* rotate 0 = Save in next flash slot
* rotate 1 = Save only in eeprom flash slot until SetOption12 0 or restart
* rotate 2 = Save in eeprom flash slot, erase next flash slots and continue depending on stop_flash_rotate
* stop_flash_rotate 0 = Allow flash slot rotation (SetOption12 0)
* stop_flash_rotate 1 = Allow only eeprom flash slot use (SetOption12 1)
*/
#ifndef BE_MINIMAL
if ((GetSettingsCrc() != settings_crc) || rotate) {
if (1 == rotate) { // Use eeprom flash slot only and disable flash rotate from now on (upgrade)
stop_flash_rotate = 1;
}
if (2 == rotate) { // Use eeprom flash slot and erase next flash slots if stop_flash_rotate is off (default)
settings_location = SETTINGS_LOCATION +1;
}
if (stop_flash_rotate) {
settings_location = SETTINGS_LOCATION;
} else {
settings_location--;
if (settings_location <= (SETTINGS_LOCATION - CFG_ROTATES)) {
settings_location = SETTINGS_LOCATION;
}
}
Settings.save_flag++;
Settings.cfg_size = sizeof(SYSCFG);
Settings.cfg_crc = GetSettingsCrc();
ESP.flashEraseSector(settings_location);
ESP.flashWrite(settings_location * SPI_FLASH_SEC_SIZE, (uint32*)&Settings, sizeof(SYSCFG));
if (!stop_flash_rotate && rotate) {
for (byte i = 1; i < CFG_ROTATES; i++) {
ESP.flashEraseSector(settings_location -i); // Delete previous configurations by resetting to 0xFF
delay(1);
}
}
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_CONFIG D_SAVED_TO_FLASH_AT " %X, " D_COUNT " %d, " D_BYTES " %d"),
settings_location, Settings.save_flag, sizeof(SYSCFG));
AddLog(LOG_LEVEL_DEBUG);
settings_crc = Settings.cfg_crc;
}
#endif // BE_MINIMAL
RtcSettingsSave();
}
void SettingsLoad()
{
/* Load configuration from eeprom or one of 7 slots below if first load does not stop_flash_rotate
*/
struct SYSCFGH {
uint16_t cfg_holder; // 000
uint16_t cfg_size; // 002
unsigned long save_flag; // 004
} _SettingsH;
bool bad_crc = false;
settings_location = SETTINGS_LOCATION +1;
for (byte i = 0; i < CFG_ROTATES; i++) {
settings_location--;
ESP.flashRead(settings_location * SPI_FLASH_SEC_SIZE, (uint32*)&Settings, sizeof(SYSCFG));
ESP.flashRead((settings_location -1) * SPI_FLASH_SEC_SIZE, (uint32*)&_SettingsH, sizeof(SYSCFGH));
if (Settings.version > 0x06000000) { bad_crc = (Settings.cfg_crc != GetSettingsCrc()); }
if (Settings.flag.stop_flash_rotate || bad_crc || (Settings.cfg_holder != _SettingsH.cfg_holder) || (Settings.save_flag > _SettingsH.save_flag)) {
break;
}
delay(1);
}
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_CONFIG D_LOADED_FROM_FLASH_AT " %X, " D_COUNT " %d"), settings_location, Settings.save_flag);
AddLog(LOG_LEVEL_DEBUG);
if (bad_crc || (Settings.cfg_holder != (uint16_t)CFG_HOLDER)) { SettingsDefault(); }
settings_crc = GetSettingsCrc();
RtcSettingsLoad();
}
void SettingsErase(uint8_t type)
{
/*
0 = Erase from program end until end of physical flash
1 = Erase SDK parameter area at end of linker memory model (0x0FDxxx - 0x0FFFFF) solving possible wifi errors
*/
bool result;
uint32_t _sectorStart = (ESP.getSketchSize() / SPI_FLASH_SEC_SIZE) + 1;
uint32_t _sectorEnd = ESP.getFlashChipRealSize() / SPI_FLASH_SEC_SIZE;
if (1 == type) {
_sectorStart = SETTINGS_LOCATION +2; // SDK parameter area above EEPROM area (0x0FDxxx - 0x0FFFFF)
_sectorEnd = SETTINGS_LOCATION +5;
}
boolean _serialoutput = (LOG_LEVEL_DEBUG_MORE <= seriallog_level);
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_ERASE " %d " D_UNIT_SECTORS), _sectorEnd - _sectorStart);
AddLog(LOG_LEVEL_DEBUG);
for (uint32_t _sector = _sectorStart; _sector < _sectorEnd; _sector++) {
result = ESP.flashEraseSector(_sector);
if (_serialoutput) {
Serial.print(F(D_LOG_APPLICATION D_ERASED_SECTOR " "));
Serial.print(_sector);
if (result) {
Serial.println(F(" " D_OK));
} else {
Serial.println(F(" " D_ERROR));
}
delay(10);
}
OsWatchLoop();
}
}
// Copied from 2.4.0 as 2.3.0 is incomplete
bool SettingsEraseConfig(void) {
const size_t cfgSize = 0x4000;
size_t cfgAddr = ESP.getFlashChipSize() - cfgSize;
for (size_t offset = 0; offset < cfgSize; offset += SPI_FLASH_SEC_SIZE) {
if (!ESP.flashEraseSector((cfgAddr + offset) / SPI_FLASH_SEC_SIZE)) {
return false;
}
}
return true;
}
void SettingsSdkErase()
{
WiFi.disconnect(true); // Delete SDK wifi config
SettingsErase(1);
SettingsEraseConfig();
delay(1000);
}
/********************************************************************************************/
void SettingsDefault()
{
AddLog_P(LOG_LEVEL_NONE, PSTR(D_LOG_CONFIG D_USE_DEFAULTS));
SettingsDefaultSet1();
SettingsDefaultSet2();
SettingsSave(2);
}
void SettingsDefaultSet1()
{
memset(&Settings, 0x00, sizeof(SYSCFG));
Settings.cfg_holder = (uint16_t)CFG_HOLDER;
Settings.cfg_size = sizeof(SYSCFG);
// Settings.save_flag = 0;
Settings.version = VERSION;
// Settings.bootcount = 0;
// Settings.cfg_crc = 0;
}
void SettingsDefaultSet2()
{
memset((char*)&Settings +16, 0x00, sizeof(SYSCFG) -16);
// Settings.flag.value_units = 0;
// Settings.flag.stop_flash_rotate = 0;
Settings.save_data = SAVE_DATA;
Settings.sleep = APP_SLEEP;
// Module
// Settings.flag.interlock = 0;
Settings.module = MODULE;
// for (byte i = 0; i < MAX_GPIO_PIN; i++) { Settings.my_gp.io[i] = 0; }
strlcpy(Settings.friendlyname[0], FRIENDLY_NAME, sizeof(Settings.friendlyname[0]));
strlcpy(Settings.friendlyname[1], FRIENDLY_NAME"2", sizeof(Settings.friendlyname[1]));
strlcpy(Settings.friendlyname[2], FRIENDLY_NAME"3", sizeof(Settings.friendlyname[2]));
strlcpy(Settings.friendlyname[3], FRIENDLY_NAME"4", sizeof(Settings.friendlyname[3]));
strlcpy(Settings.ota_url, OTA_URL, sizeof(Settings.ota_url));
// Power
Settings.flag.save_state = SAVE_STATE;
Settings.power = APP_POWER;
Settings.poweronstate = APP_POWERON_STATE;
Settings.blinktime = APP_BLINKTIME;
Settings.blinkcount = APP_BLINKCOUNT;
Settings.ledstate = APP_LEDSTATE;
Settings.pulse_timer[0] = APP_PULSETIME;
// for (byte i = 1; i < MAX_PULSETIMERS; i++) { Settings.pulse_timer[i] = 0; }
// Serial
Settings.baudrate = APP_BAUDRATE / 1200;
Settings.sbaudrate = SOFT_BAUDRATE / 1200;
Settings.serial_delimiter = 0xff;
Settings.seriallog_level = SERIAL_LOG_LEVEL;
// Wifi
ParseIp(&Settings.ip_address[0], WIFI_IP_ADDRESS);
ParseIp(&Settings.ip_address[1], WIFI_GATEWAY);
ParseIp(&Settings.ip_address[2], WIFI_SUBNETMASK);
ParseIp(&Settings.ip_address[3], WIFI_DNS);
Settings.sta_config = WIFI_CONFIG_TOOL;
// Settings.sta_active = 0;
strlcpy(Settings.sta_ssid[0], STA_SSID1, sizeof(Settings.sta_ssid[0]));
strlcpy(Settings.sta_pwd[0], STA_PASS1, sizeof(Settings.sta_pwd[0]));
strlcpy(Settings.sta_ssid[1], STA_SSID2, sizeof(Settings.sta_ssid[1]));
strlcpy(Settings.sta_pwd[1], STA_PASS2, sizeof(Settings.sta_pwd[1]));
strlcpy(Settings.hostname, WIFI_HOSTNAME, sizeof(Settings.hostname));
// Syslog
strlcpy(Settings.syslog_host, SYS_LOG_HOST, sizeof(Settings.syslog_host));
Settings.syslog_port = SYS_LOG_PORT;
Settings.syslog_level = SYS_LOG_LEVEL;
// Webserver
Settings.flag2.emulation = EMULATION;
Settings.webserver = WEB_SERVER;
Settings.weblog_level = WEB_LOG_LEVEL;
strlcpy(Settings.web_password, WEB_PASSWORD, sizeof(Settings.web_password));
// Button
// Settings.flag.button_restrict = 0;
// Settings.flag.button_swap = 0;
// Settings.flag.button_single = 0;
Settings.param[P_HOLD_TIME] = KEY_HOLD_TIME; // Default 4 seconds hold time
// Switch
for (byte i = 0; i < MAX_SWITCHES; i++) { Settings.switchmode[i] = SWITCH_MODE; }
// MQTT
Settings.flag.mqtt_enabled = MQTT_USE;
// Settings.flag.mqtt_response = 0;
Settings.flag.mqtt_power_retain = MQTT_POWER_RETAIN;
Settings.flag.mqtt_button_retain = MQTT_BUTTON_RETAIN;
Settings.flag.mqtt_switch_retain = MQTT_SWITCH_RETAIN;
// Settings.flag.mqtt_sensor_retain = 0;
// Settings.flag.mqtt_offline = 0;
// Settings.flag.mqtt_serial = 0;
// Settings.flag.device_index_enable = 0;
strlcpy(Settings.mqtt_host, MQTT_HOST, sizeof(Settings.mqtt_host));
Settings.mqtt_port = MQTT_PORT;
strlcpy(Settings.mqtt_client, MQTT_CLIENT_ID, sizeof(Settings.mqtt_client));
strlcpy(Settings.mqtt_user, MQTT_USER, sizeof(Settings.mqtt_user));
strlcpy(Settings.mqtt_pwd, MQTT_PASS, sizeof(Settings.mqtt_pwd));
strlcpy(Settings.mqtt_topic, MQTT_TOPIC, sizeof(Settings.mqtt_topic));
strlcpy(Settings.button_topic, "0", sizeof(Settings.button_topic));
strlcpy(Settings.switch_topic, "0", sizeof(Settings.switch_topic));
strlcpy(Settings.mqtt_grptopic, MQTT_GRPTOPIC, sizeof(Settings.mqtt_grptopic));
strlcpy(Settings.mqtt_fulltopic, MQTT_FULLTOPIC, sizeof(Settings.mqtt_fulltopic));
Settings.mqtt_retry = MQTT_RETRY_SECS;
strlcpy(Settings.mqtt_prefix[0], SUB_PREFIX, sizeof(Settings.mqtt_prefix[0]));
strlcpy(Settings.mqtt_prefix[1], PUB_PREFIX, sizeof(Settings.mqtt_prefix[1]));
strlcpy(Settings.mqtt_prefix[2], PUB_PREFIX2, sizeof(Settings.mqtt_prefix[2]));
strlcpy(Settings.state_text[0], MQTT_STATUS_OFF, sizeof(Settings.state_text[0]));
strlcpy(Settings.state_text[1], MQTT_STATUS_ON, sizeof(Settings.state_text[1]));
strlcpy(Settings.state_text[2], MQTT_CMND_TOGGLE, sizeof(Settings.state_text[2]));
strlcpy(Settings.state_text[3], MQTT_CMND_HOLD, sizeof(Settings.state_text[3]));
char fingerprint[60];
strlcpy(fingerprint, MQTT_FINGERPRINT1, sizeof(fingerprint));
char *p = fingerprint;
for (byte i = 0; i < 20; i++) {
Settings.mqtt_fingerprint[0][i] = strtol(p, &p, 16);
}
strlcpy(fingerprint, MQTT_FINGERPRINT2, sizeof(fingerprint));
p = fingerprint;
for (byte i = 0; i < 20; i++) {
Settings.mqtt_fingerprint[1][i] = strtol(p, &p, 16);
}
Settings.tele_period = TELE_PERIOD;
// Energy
Settings.flag2.current_resolution = 3;
// Settings.flag2.voltage_resolution = 0;
// Settings.flag2.wattage_resolution = 0;
Settings.flag2.energy_resolution = ENERGY_RESOLUTION;
Settings.param[P_MAX_POWER_RETRY] = MAX_POWER_RETRY;
Settings.energy_power_delta = DEFAULT_POWER_DELTA;
Settings.energy_power_calibration = HLW_PREF_PULSE;
Settings.energy_voltage_calibration = HLW_UREF_PULSE;
Settings.energy_current_calibration = HLW_IREF_PULSE;
// Settings.energy_kWhtoday = 0;
// Settings.energy_kWhyesterday = 0;
// Settings.energy_kWhdoy = 0;
// Settings.energy_min_power = 0;
// Settings.energy_max_power = 0;
// Settings.energy_min_voltage = 0;
// Settings.energy_max_voltage = 0;
// Settings.energy_min_current = 0;
// Settings.energy_max_current = 0;
// Settings.energy_max_power_limit = 0; // MaxPowerLimit
Settings.energy_max_power_limit_hold = MAX_POWER_HOLD;
Settings.energy_max_power_limit_window = MAX_POWER_WINDOW;
// Settings.energy_max_power_safe_limit = 0; // MaxSafePowerLimit
Settings.energy_max_power_safe_limit_hold = SAFE_POWER_HOLD;
Settings.energy_max_power_safe_limit_window = SAFE_POWER_WINDOW;
// Settings.energy_max_energy = 0; // MaxEnergy
// Settings.energy_max_energy_start = 0; // MaxEnergyStart
// Settings.energy_kWhtotal = 0;
RtcSettings.energy_kWhtotal = 0;
// RF Bridge
// for (byte i = 0; i < 17; i++) { Settings.rf_code[i][0] = 0; }
memcpy_P(Settings.rf_code[0], kDefaultRfCode, 9);
// Domoticz
Settings.domoticz_update_timer = DOMOTICZ_UPDATE_TIMER;
// for (byte i = 0; i < MAX_DOMOTICZ_IDX; i++) {
// Settings.domoticz_relay_idx[i] = 0;
// Settings.domoticz_key_idx[i] = 0;
// Settings.domoticz_switch_idx[i] = 0;
// }
// for (byte i = 0; i < MAX_DOMOTICZ_SNS_IDX; i++) {
// Settings.domoticz_sensor_idx[i] = 0;
// }
// Sensor
Settings.flag.temperature_conversion = TEMP_CONVERSION;
Settings.flag2.pressure_resolution = PRESSURE_RESOLUTION;
Settings.flag2.humidity_resolution = HUMIDITY_RESOLUTION;
Settings.flag2.temperature_resolution = TEMP_RESOLUTION;
// Settings.altitude = 0;
// Rules
// Settings.flag.rules_enabled = 0;
// Settings.flag.rules_once = 0;
// for (byte i = 1; i < MAX_RULE_SETS; i++) { Settings.rules[i][0] = '\0'; }
// Home Assistant
Settings.flag.hass_discovery = HOME_ASSISTANT_DISCOVERY_ENABLE;
// Knx
// Settings.flag.knx_enabled = 0;
// Settings.flag.knx_enable_enhancement = 0;
// Light
Settings.flag.pwm_control = 1;
//Settings.flag.ws_clock_reverse = 0;
//Settings.flag.light_signal = 0;
//Settings.flag.not_power_linked = 0;
//Settings.flag.decimal_text = 0;
Settings.pwm_frequency = PWM_FREQ;
Settings.pwm_range = PWM_RANGE;
for (byte i = 0; i < MAX_PWMS; i++) {
Settings.light_color[i] = 255;
// Settings.pwm_value[i] = 0;
}
// Settings.light_correction = 0;
Settings.light_dimmer = 10;
// Settings.light_fade = 0;
Settings.light_speed = 1;
// Settings.light_scheme = 0;
Settings.light_width = 1;
// Settings.light_wakeup = 0;
Settings.light_pixels = WS2812_LEDS;
// Settings.light_rotation = 0;
SettingsDefaultSet_5_8_1(); // Clock color
// Display
SettingsDefaultSet_5_10_1(); // Display settings
// Time
Settings.timezone = APP_TIMEZONE;
strlcpy(Settings.ntp_server[0], NTP_SERVER1, sizeof(Settings.ntp_server[0]));
strlcpy(Settings.ntp_server[1], NTP_SERVER2, sizeof(Settings.ntp_server[1]));
strlcpy(Settings.ntp_server[2], NTP_SERVER3, sizeof(Settings.ntp_server[2]));
for (byte j = 0; j < 3; j++) {
for (byte i = 0; i < strlen(Settings.ntp_server[j]); i++) {
if (Settings.ntp_server[j][i] == ',') {
Settings.ntp_server[j][i] = '.';
}
}
}
Settings.latitude = (int)((double)LATITUDE * 1000000);
Settings.longitude = (int)((double)LONGITUDE * 1000000);
SettingsDefaultSet_5_13_1c(); // Time STD/DST settings
}
/********************************************************************************************/
void SettingsDefaultSet_5_8_1()
{
// Settings.flag.ws_clock_reverse = 0;
Settings.ws_width[WS_SECOND] = 1;
Settings.ws_color[WS_SECOND][WS_RED] = 255;
Settings.ws_color[WS_SECOND][WS_GREEN] = 0;
Settings.ws_color[WS_SECOND][WS_BLUE] = 255;
Settings.ws_width[WS_MINUTE] = 3;
Settings.ws_color[WS_MINUTE][WS_RED] = 0;
Settings.ws_color[WS_MINUTE][WS_GREEN] = 255;
Settings.ws_color[WS_MINUTE][WS_BLUE] = 0;
Settings.ws_width[WS_HOUR] = 5;
Settings.ws_color[WS_HOUR][WS_RED] = 255;
Settings.ws_color[WS_HOUR][WS_GREEN] = 0;
Settings.ws_color[WS_HOUR][WS_BLUE] = 0;
}
void SettingsDefaultSet_5_10_1()
{
Settings.display_model = 0;
Settings.display_mode = 1;
Settings.display_refresh = 2;
Settings.display_rows = 2;
Settings.display_cols[0] = 16;
Settings.display_cols[1] = 8;
//#if defined(USE_I2C) && defined(USE_DISPLAY)
Settings.display_address[0] = MTX_ADDRESS1;
Settings.display_address[1] = MTX_ADDRESS2;
Settings.display_address[2] = MTX_ADDRESS3;
Settings.display_address[3] = MTX_ADDRESS4;
Settings.display_address[4] = MTX_ADDRESS5;
Settings.display_address[5] = MTX_ADDRESS6;
Settings.display_address[6] = MTX_ADDRESS7;
Settings.display_address[7] = MTX_ADDRESS8;
//#endif // USE_DISPLAY
Settings.display_dimmer = 1;
Settings.display_size = 1;
}
void SettingsResetStd()
{
Settings.tflag[0].hemis = TIME_STD_HEMISPHERE;
Settings.tflag[0].week = TIME_STD_WEEK;
Settings.tflag[0].dow = TIME_STD_DAY;
Settings.tflag[0].month = TIME_STD_MONTH;
Settings.tflag[0].hour = TIME_STD_HOUR;
Settings.toffset[0] = TIME_STD_OFFSET;
}
void SettingsResetDst()
{
Settings.tflag[1].hemis = TIME_DST_HEMISPHERE;
Settings.tflag[1].week = TIME_DST_WEEK;
Settings.tflag[1].dow = TIME_DST_DAY;
Settings.tflag[1].month = TIME_DST_MONTH;
Settings.tflag[1].hour = TIME_DST_HOUR;
Settings.toffset[1] = TIME_DST_OFFSET;
}
void SettingsDefaultSet_5_13_1c()
{
SettingsResetStd();
SettingsResetDst();
}
/********************************************************************************************/
void SettingsDelta()
{
if (Settings.version != VERSION) { // Fix version dependent changes
if (Settings.version < 0x05050000) {
for (byte i = 0; i < 17; i++) { Settings.rf_code[i][0] = 0; }
memcpy_P(Settings.rf_code[0], kDefaultRfCode, 9);
}
if (Settings.version < 0x05080000) {
Settings.light_pixels = WS2812_LEDS;
Settings.light_width = 1;
Settings.light_color[0] = 255;
Settings.light_color[1] = 0;
Settings.light_color[2] = 0;
Settings.light_dimmer = 10;
Settings.light_correction = 0;
Settings.light_fade = 0;
Settings.light_speed = 1;
Settings.light_scheme = 0;
Settings.light_width = 1;
Settings.light_wakeup = 0;
}
if (Settings.version < 0x0508000A) {
Settings.power = 0;
Settings.altitude = 0;
}
if (Settings.version < 0x0508000B) {
for (byte i = 0; i < MAX_GPIO_PIN; i++) { // Move GPIO_LEDs
if ((Settings.my_gp.io[i] >= 25) && (Settings.my_gp.io[i] <= 32)) { // Was GPIO_LED1
Settings.my_gp.io[i] += 23; // Move GPIO_LED1
}
}
for (byte i = 0; i < MAX_PWMS; i++) { // Move pwm_value and reset additional pulse_timerrs
Settings.pwm_value[i] = Settings.pulse_timer[4 +i];
Settings.pulse_timer[4 +i] = 0;
}
}
if (Settings.version < 0x0508000D) {
Settings.pwm_frequency = PWM_FREQ;
Settings.pwm_range = PWM_RANGE;
}
if (Settings.version < 0x0508000E) {
SettingsDefaultSet_5_8_1();
}
if (Settings.version < 0x05090102) {
Settings.flag2.data = Settings.flag.data;
Settings.flag2.data &= 0xFFE80000;
Settings.flag2.voltage_resolution = Settings.flag.not_power_linked;
Settings.flag2.current_resolution = 3;
Settings.ina219_mode = 0;
}
if (Settings.version < 0x050A0009) {
SettingsDefaultSet_5_10_1();
}
if (Settings.version < 0x050B0107) {
Settings.flag.not_power_linked = 0;
}
if (Settings.version < 0x050C0005) {
Settings.light_rotation = 0;
Settings.energy_power_delta = DEFAULT_POWER_DELTA;
char fingerprint[60];
memcpy(fingerprint, Settings.mqtt_fingerprint, sizeof(fingerprint));
char *p = fingerprint;
for (byte i = 0; i < 20; i++) {
Settings.mqtt_fingerprint[0][i] = strtol(p, &p, 16);
Settings.mqtt_fingerprint[1][i] = Settings.mqtt_fingerprint[0][i];
}
}
if (Settings.version < 0x050C0007) {
Settings.baudrate = APP_BAUDRATE / 1200;
}
if (Settings.version < 0x050C0008) {
Settings.sbaudrate = SOFT_BAUDRATE / 1200;
Settings.serial_delimiter = 0xff;
}
if (Settings.version < 0x050C000A) {
Settings.latitude = (int)((double)LATITUDE * 1000000);
Settings.longitude = (int)((double)LONGITUDE * 1000000);
}
if (Settings.version < 0x050C000B) {
Settings.rules[0][0] = '\0';
}
if (Settings.version < 0x050C000D) {
memmove(Settings.rules, Settings.rules -256, sizeof(Settings.rules)); // move rules up by 256 bytes
memset(&Settings.timer, 0x00, sizeof(Timer) * MAX_TIMERS); // Reset timers as layout has changed from v5.12.0i
Settings.knx_GA_registered = 0;
Settings.knx_CB_registered = 0;
memset(&Settings.knx_physsical_addr, 0x00, 0x800 - 0x6b8); // Reset until 0x800 for future use
}
if (Settings.version < 0x050C000F) {
Settings.energy_kWhtoday /= 1000;
Settings.energy_kWhyesterday /= 1000;
RtcSettings.energy_kWhtoday /= 1000;
}
if (Settings.version < 0x050D0103) {
SettingsDefaultSet_5_13_1c();
}
if (Settings.version < 0x050E0002) {
for (byte i = 1; i < MAX_RULE_SETS; i++) { Settings.rules[i][0] = '\0'; }
Settings.rule_enabled = Settings.flag.rules_enabled;
Settings.rule_once = Settings.flag.rules_once;
}
if (Settings.version < 0x06000000) {
Settings.cfg_size = sizeof(SYSCFG);
Settings.cfg_crc = GetSettingsCrc();
}
if (Settings.version < 0x06000002) {
for (byte i = 0; i < MAX_SWITCHES; i++) {
if (i < 4) {
Settings.switchmode[i] = Settings.ex_switchmode[i];
} else {
Settings.switchmode[i] = SWITCH_MODE;
}
}
for (byte i = 0; i < MAX_GPIO_PIN; i++) {
if (Settings.my_gp.io[i] >= GPIO_SWT5) { // Move up from GPIO_SWT5 to GPIO_KEY1
Settings.my_gp.io[i] += 4;
}
}
}
if (Settings.version < 0x06000003) {
Settings.flag.rules_enabled = 0;
Settings.flag.rules_once = 0;
Settings.flag3.data = 0;
}
if (Settings.version < 0x06010103) {
Settings.flag3.timers_enable = 1;
}
Settings.version = VERSION;
SettingsSave(1);
}
}