Tasmota/sonoff/xsns_17_senseair.ino

261 lines
8.5 KiB
Arduino
Raw Normal View History

/*
xsns_17_senseair.ino - SenseAir CO2 sensor support for Sonoff-Tasmota
Copyright (C) 2018 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_SENSEAIR
/*********************************************************************************************\
* SenseAir K30, K70 and S8 - CO2 sensor
*
* Adapted from EspEasy plugin P052 by Mikael Trieb (mikael__AT__triebconsulting.se)
\*********************************************************************************************/
#include <TasmotaSerial.h>
#ifndef CO2_LOW
#define CO2_LOW 800 // Below this CO2 value show green light
#endif
#ifndef CO2_HIGH
#define CO2_HIGH 1200 // Above this CO2 value show red light
#endif
TasmotaSerial *SensairSerial;
const char kSenseairTypes[] PROGMEM = "Kx0|S8";
uint8_t senseair_type = 1;
char senseair_types[7];
uint16_t senseair_co2 = 0;
float senseair_temperature = 0;
float senseair_humidity = 0;
uint8_t senseair_state = 0;
/*********************************************************************************************/
void ModbusSend(uint8_t function_code, uint16_t start_address, uint16_t register_count)
{
uint8_t frame[8];
frame[0] = 0xFE; // Any Address
frame[1] = function_code;
frame[2] = (uint8_t)(start_address >> 8);
frame[3] = (uint8_t)(start_address);
frame[4] = (uint8_t)(register_count >> 8);
frame[5] = (uint8_t)(register_count);
uint16_t crc = 0xFFFF;
for (uint8_t pos = 0; pos < sizeof(frame) -2; pos++) {
crc ^= (uint16_t)frame[pos]; // XOR byte into least sig. byte of crc
for (uint8_t i = 8; i != 0; i--) { // Loop over each bit
if ((crc & 0x0001) != 0) { // If the LSB is set
crc >>= 1; // Shift right and XOR 0xA001
crc ^= 0xA001;
}
else { // Else LSB is not set
crc >>= 1; // Just shift right
}
}
}
frame[7] = (uint8_t)((crc >> 8) & 0xFF);
frame[6] = (uint8_t)(crc & 0xFF);
SensairSerial->flush();
SensairSerial->write(frame, sizeof(frame));
}
bool ModbusReceiveReady()
{
return (SensairSerial->available() >= 5); // 5 - Error frame, 7 - Ok frame
}
uint8_t ModbusReceive(uint16_t *value)
{
uint8_t buffer[7];
uint8_t len = 0;
while (SensairSerial->available() > 0) {
buffer[len++] = (uint8_t)SensairSerial->read();
if (3 == len) {
if (buffer[1] & 0x80) { // fe 84 02 f2 f1
return buffer[2]; // 1 = Illegal Function, 2 = Illegal Data Address, 3 = Illegal Data Value
}
}
}
AddLogSerial(LOG_LEVEL_DEBUG_MORE, buffer, len);
if (len != sizeof(buffer)) {
return 9; // 9 = Unexpected result
}
*value = (buffer[3] << 8) | buffer[4];
return 0; // 0 = No error
}
/*********************************************************************************************/
const uint8_t start_addresses[] { 0x1A, 0x00, 0x03, 0x04, 0x05, 0x1C, 0x0A };
uint8_t senseair_read_state = 0;
uint8_t senseair_send_retry = 0;
void Senseair50ms() // Every 50 mSec
{
senseair_state++;
if (6 == senseair_state) { // Every 300 mSec
senseair_state = 0;
uint16_t value = 0;
bool data_ready = ModbusReceiveReady();
if (data_ready) {
uint8_t error = ModbusReceive(&value);
if (error) {
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DEBUG "SenseAir response error %d"), error);
AddLog(LOG_LEVEL_DEBUG);
} else {
switch(senseair_read_state) {
case 0: // 0x1A (26) READ_TYPE_LOW - S8: fe 04 02 01 77 ec 92
senseair_type = 2;
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DEBUG "SenseAir type id low %04X"), value);
AddLog(LOG_LEVEL_DEBUG);
break;
case 1: // 0x00 (0) READ_ERRORLOG - fe 04 02 00 00 ad 24
if (value) {
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DEBUG "SenseAir error %04X"), value);
AddLog(LOG_LEVEL_DEBUG);
}
break;
case 2: // 0x03 (3) READ_CO2 - fe 04 02 06 2c af 59
senseair_co2 = value;
LightSetSignal(CO2_LOW, CO2_HIGH, senseair_co2);
break;
case 3: // 0x04 (4) READ_TEMPERATURE - S8: fe 84 02 f2 f1 - Illegal Data Address
senseair_temperature = ConvertTemp((float)value / 100);
break;
case 4: // 0x05 (5) READ_HUMIDITY - S8: fe 84 02 f2 f1 - Illegal Data Address
senseair_humidity = (float)value / 100;
break;
case 5: // 0x1C (28) READ_RELAY_STATE - S8: fe 04 02 01 54 ad 4b - firmware version
{
bool relay_state = value >> 8 & 1;
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DEBUG "SenseAir relay state %d"), relay_state);
AddLog(LOG_LEVEL_DEBUG);
break;
}
case 6: // 0x0A (10) READ_TEMP_ADJUSTMENT - S8: fe 84 02 f2 f1 - Illegal Data Address
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DEBUG "SenseAir temp adjustment %d"), value);
AddLog(LOG_LEVEL_DEBUG);
break;
}
}
senseair_read_state++;
if (2 == senseair_type) { // S8
if (3 == senseair_read_state) {
senseair_read_state = 1;
}
} else { // K30, K70
if (sizeof(start_addresses) == senseair_read_state) {
senseair_read_state = 1;
}
}
}
if (0 == senseair_send_retry || data_ready) {
senseair_send_retry = 5;
ModbusSend(0x04, (uint16_t)start_addresses[senseair_read_state], 1);
} else {
senseair_send_retry--;
}
}
}
/*********************************************************************************************/
void SenseairInit()
{
senseair_type = 0;
if ((pin[GPIO_SAIR_RX] < 99) && (pin[GPIO_SAIR_TX] < 99)) {
SensairSerial = new TasmotaSerial(pin[GPIO_SAIR_RX], pin[GPIO_SAIR_TX]);
if (SensairSerial->begin()) {
senseair_type = 1;
}
}
}
void SenseairShow(boolean json)
{
char temperature[10];
char humidity[10];
dtostrfd(senseair_temperature, Settings.flag2.temperature_resolution, temperature);
dtostrfd(senseair_humidity, Settings.flag2.temperature_resolution, humidity);
GetTextIndexed(senseair_types, sizeof(senseair_types), senseair_type -1, kSenseairTypes);
if (json) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"%s\":{\"" D_JSON_CO2 "\":%d"), mqtt_data, senseair_types, senseair_co2);
if (senseair_type != 2) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"" D_JSON_TEMPERATURE "\":%s,\"" D_JSON_HUMIDITY "\":%s"), mqtt_data, temperature, humidity);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
#ifdef USE_DOMOTICZ
DomoticzSensor(DZ_AIRQUALITY, senseair_co2);
#endif // USE_DOMOTICZ
#ifdef USE_WEBSERVER
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_CO2, mqtt_data, senseair_types, senseair_co2);
if (senseair_type != 2) {
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, senseair_types, temperature, TempUnit());
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, senseair_types, humidity);
}
#endif // USE_WEBSERVER
}
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
#define XSNS_17
boolean Xsns17(byte function)
{
boolean result = false;
if (senseair_type) {
switch (function) {
case FUNC_INIT:
SenseairInit();
break;
case FUNC_EVERY_50_MSECOND:
Senseair50ms();
break;
case FUNC_JSON_APPEND:
SenseairShow(1);
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_APPEND:
SenseairShow(0);
break;
#endif // USE_WEBSERVER
}
}
return result;
}
#endif // USE_SENSEAIR