5.12.0h
* Add support for Software Serial bridge using commands
SerialDelimiter, SBaudrate and SSerialSend. Supports 8N1 and text only
(#2190)
* Add support for Hardware Serial bridge using commands
SerialDelimiter, Baudrate and SerialSend. Supports 8N1 and text only
(#2182)
5.11.1j
* Prep for release
* Change uptime from hour to second
resulting in a display of 123T13:45:21 where 123 is days
* Fix Arilux
RF induced exception by moving interrupt handler to iram on non
esp/arduino lib v2.3.0
* Add NTP sync based on chip id (#1773)
5.11.1i
* Fix some Energy Monitoring related issues
* Add command SetOption21 1 to allow Energy Monitoring when power is off
on Sonoff Pow and Sonoff S31 (#1420)
5.11.1i
* Update TasmotaSerial library to 1.1.0
* Rename commands
HlwPCal, HlwUCal and HlwICal to PowerCal, VoltageCal and CurrentCal to
be used for both Pow and S31 calibration
* Rename commands HlwPSet,
HlwUSet and HlwISet to PowerSet, VoltageSet and CurrentSet to be used
for both Pow and S31 calibration
* Add support for Sonoff S31 Smart
Socket with Power Consumption Detection (#1626)
* Fix IRReceive Data
value (#1663)
* Fix compiler warnings (#1774)
5.11.1g
* Add support for PMS5003 particle concentration sensor
*
Reinstate console weblog to 20 lines after some webpage rewrite
* Add
command SetOption20 to allow update of Dimmer/Color/Ct without turning
power on (#1719)
* Update language files nl-NL (#1723) and es-AR
(#1722)
5.11.1b
* Add command PowerOnState option 5 which inverts PulseTime and
allows for delayed always on after power on
* Changed
OSWATCH_RESET_TIME (Blocked loop) from 30 to 120 seconds to allow slow
networks (#1556)
* Add French language file (#1561)
* Fix truncated
command names and wrong response for DomoticzSwitchIdx (#1571)
* Add
HTTP Allow Cross Origin removed from ESP8266/Arduino 2.4.0 (#1572)
*
Fix %-sign issue as printf escape character in Humidity and Sonoff SC
(#1579)
5.11.1a
* Add automagic two step Web server OTA upgrade using
filename-minimal image if OTA free space is too small
* Add chinese
language file (#1551)
5.10.0i
* Add device function pointers
* Moved Command and JSON
English language defines to one file (i18n.h)
* Update it-IT.h language
file (#1449)
* Fix Wemo and Hue emulation by adding M-Search response
delay (#1486)
5.10.0d
* Renamed commands Color2,3,4 to Color3,4,5
* Add command
Color2 to set color while keeping same dimmer value
* Add led signal to
Carbon Dioxide (CO2) sensors (see user_config.h)
* Fix Wemo Emulation
again (#1357)
* Updated German translation (#1438)
* Add support for SenseAir S8 CO2 sensor to be enabled with define
USE_SENSEAIR in user_config.h
* Add support for Domoticz Air Quality
sensor to be used by MH-Z19(B) and SenseAir sensors
5.10.0b
* Change Sonoff Pow Energy MQTT data JSON message and
consolidate Status 8 into Status 10
* Add optional support for PZEM004T
energy sensor to enable with define USE_PZEM004T in user_config.h (#614)
5.9.1d
* Add support for Arilux LC11 (CLearing RF home code when
selecting no Arilux module)
* Add fixed color options 1..12 to command
Color
* Add + (plus) and - (minus) to commands Dimmer (+10/-10), Speed
and Scheme
5.8.0n
* Fix minimum TelePeriod of 10 seconds set by web page
* Shrink
information web page by 1k code space
* Removed Arduino IDE version too
low warning as it interferes with platformio.ini platform =
espressif8266_stage
* Add commands Color2, Color3, Color4, Width2,
Width3, Width4 and SetOption16 to set Ws2812 Clock parameters (#1019)
*
Add Polish language file (#1044, #1047)
* Add support for KMC 70011
Power Monitoring Smart Plug (#1045)
* Corrected German language file
(#1054)
5.8.0m
* Rewrite code (partly) using Google C++ Style Guide
(https://google.github.io/styleguide/cppguide.html)
* Allow empty
MqttHost name by using option 0
* Allow Mqtt server mDNS lookup only
when MqttHost name is empty (#1026)
* Change Ws2812 clock with more
flexible version (#1019)
* Add German language file (#1022)
* Support
connecting to MQTT brokers without userid and/or password (#1023)
* Add
commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025)
5.8.0j
* Set default altitude to 0 to be used with pressure sensors
*
Document flash settings area for future use
* Prepare for 32-bit power
control (#995)
* Introduce sonoff.h master header
* Fix TLS MQTT SSL
fingerprint test (#808, #970)
* Fix pressure calculation for some BMP
versions regression introduced with version 5.8.0i (#974)
* Fix
Domoticz Dimmer set to same level not powering on (#945)
5.8.0i
* Add Domoticz counter sensor to IrReceive representing Received
IR Protocol and Data
* Fix Southern Hemisphere TIME_STD/TIME_DST
(#968)
* Add Sea level pressure calculation (#974)
* Fix virtual relay
status message used with Color/Dimmer control (#989)
* Fix command
IRSend and IRHvac case sensitive parameter regression introduced with
version 5.8.0 (#993)
5.8.0f
* Set all saved power settings to Off when SetOption0
(SaveState) = 0 (#955)
* Allow PWM initialization after restart (#955)
* Add support for inverted PWM (#960)
5.8.0d
* Remove previous GPIO configuration when another module is
selected
* Fix inverted relay power on state (#909)
* Change default
PWM assignments for H801 RGB(CW) led controller to support optional
Color/Dimmer control
* GPIO04 (W2) from GPIO_PWM2 to GPIO_USER to
be user configurable for GPIO_PWM5 (second White - Warm if W1 is Cold)
* GPIO12 (Blue) GPIO_PWM3 no change
* GPIO13 (Green) from
GPIO_PWM4 to GPIO_PWM2
* GPIO14 (W1) from GPIO_PWM1 to GPIO_USER
to be user configurable for GPIO_PWM4 (first White - Cold or Warm)
*
GPIO15 (Red) from GPIO_PWM5 to GPIO_PWM1
* Change default PWM
assignments for MagicHome RGB(W) led controller to support optional
Color/Dimmer control
* GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2
*
GPIO12 (Blue) from GPIO_PWM5 to GPIO_PWM3
* GPIO13 (White) GPIO_USER
to be user configurable for GPIO_PWM4 (White - Cold or Warm)
* GPIO14
(Red) from GPIO_PWM3 to GPIO_PWM1
* Add command SetOption15 0
(default) for command PWM control or SetOption15 1 for commands
Color/Dimmer control to PWM RGB(CW) leds (#941)
5.6.1 20170818
* Change module list order in webpage
* Fix Sonoff T1 1CH and 2CH configuration (#751)
*
* 5.6.0 20170818
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Sonoff T1 support (#582)
* Add AnalogInput0 if configured as Analog Input to webpage (#697, #746)
* Add command SetOption14 0|1 to enable interlock mode (#719, #721)
* Fix Mitsubishi HVAC IR power controll (#740)
5.5.1 20170805
* Fix Sonoff Rf Bridge issues
* Add Sonoff RF Bridge MQTT messages on received and learned RF signal
* Add command VoltRes 0|1 to select voltage resolution to 0.1 V (#654)
* Add averaging to Analog input (#686)
* Add Energy tele data on Sonoff Pow Threshold change (#688)
* Fix inconsistent property names in Messages (#690)
5.5.0 20170730
* Reduce code space by removing the following commands as they are
replaced by SetOption alternatives:
* SaveState = SetOption0
* ButtonRestrict = SetOption1
* Units = SetOption2
* MQTT = SetOption3
* MQTTResponse = SetOption4
* TempUnit = SetOption8
* Smoothing WS2812 animation poll, invert fade speed and max allowed
wakeup time down to 3000 seconds
* Fix initial button press detection
* Add support for Sonoff RF Bridge 433 using command RfKey
* Fix regression from 5.0.7 by increasing message buffer size from 360
to 368 to accomodate 4 x DS18x20 sensors (#637)
* Add GroupTopic to Topic test when using ButtonTopic/SwitchTopic to
send either ON/OFF or TOGGLE (#642)
* Adjust HLW calibration limits to accomodate HuaFan device and add
commands HlwPSet, HlwUSet and HlwISet (#654)
5.4.0 20170725
* Fix command reset regression introduced in 5.2.0
* Increase polling from 0.1 second to 0.05 second
* Add multipress to all buttons
* Fix button 1 double press behaviour on multi relay devices
* Add support for Hua Fan Smart Socket (#479)
* Add support for Sonoff 4ch Pro (#565)
* Add command SetOption13 1 to allow immediate action on single button
press
* (disables multipress, hold and unrestricted commands) (#587)
5.2.0 20170619
* Add command SetOption12 1 to disable newly released configuration
flash rotate to reduce flash wear
* Fix command CounterDebounce by removing test for active GPIO (#524)
* Add command SetOption33 1..250 to allow user configure POW
Max_Power_Retry count (#525)
5.1.7 20170616
* Prep removal of SetOptions alternatives
* Restore webpage upgrade error messages removed in 5.1.5
* Add hold button functionality to buttons 2 to 4
* Add command SetOption32 1..100 to set Key Hold Time from 0.1 seconds
to 10 seconds (#200)
* Allow slashes in Topic, GroupTopic, ButtonTopic and SwitchTopic (#507)
* Changed webpage form actions from post to get and use relative path
url (#434, #522)
5.1.6 20170606
* Shrink code
* Removed online configuration of Domoticz In and Domoticz Out MQTT
strings
* Removed commands DomoticzInTopic and DomoticzOutTopic
* Add define KEY_HOLD_TIME to configure button hold threshold before
sending MQTT Hold message
* Add command StateText4 to configure button MQTT Hold text (=
MQTT_CMND_HOLD)
* Add command SetOption11 0|1 to swap pushbutton single and double press
functionality (#200)
* Add command SwitchMode<x> 5 (PUSHBUTTONHOLD) and 6
(PUSHBUTTONHOLD_INV) (#489)
5.1.1 20170517
* Allow command FullTopic in group mode
* Prepare for more use of RTC memory
* Add independant WS2812 led string power control (#386, #390)
* Add command Counter<x> to control up to four GPIO falling edge
interrupt counters or timers (#459)
* Add command CounterType<x> to select between pulse counting or pulse
timing
* Add command CounterDebounce to select global counter debounce time in
mSec
5.1.0 20170513
* Fix Offline/Removal of retained topic when FullTopic is changed
* Add FullTopic to MQTT Configuration and Information web page
* Adde license model GPLv3 (#188)
5.0.7 20170511
* Fix possible exception 28 on empty command
* Add command SetOption0 as replacement for SaveState
* Add command SetOption1 as replacement for ButtonRestrict
* Add command SetOption2 as replacement for Units
* Add command SetOption4 as replacement for MqttResponse
* Add command SetOption8 as replacement for TempUnit
* Add command SetOption10 On|Off to select between Offline or Removing
previous retained topic (#417, #436)
5.0.6 20170510
* Remove hyphen in case of a single DHT sensor connecetd (#427)
* Add command MqttRetry <seconds> to change default MQTT reconnect retry
timer from minimal 10 seconds (#429)
5.0.5 20170508
* Add command FullTopic with tokens %topic% (replaced by command Topic
value) and
* %prefix% (replaced by command Prefix<x> values) for more flexible
topic definitions (#244)
* See wiki > MQTT Features
https://github.com/arendst/Sonoff-Tasmota/wiki/MQTT-Features for more
information
Adrian Scillato
Theo Arends