Commit Graph

83 Commits

Author SHA1 Message Date
Theo Arends 632e523c37 Bump version to 9.3.1.1 2021-02-23 16:27:30 +01:00
Theo Arends 59c0ebd49e Bump version 9.3.0.1 2021-02-19 16:51:55 +01:00
Paul C Diem 60252a9043 Add DGR device map support 2021-02-09 15:10:32 -06:00
Theo Arends 8b0e45a58b Increase number of switch GPIOs from 8 to 28 2021-02-05 11:58:24 +01:00
Theo Arends d5542b1a66 ESP32 increase number of relay GPIOs from 8 to 28 2021-02-04 17:06:45 +01:00
Theo Arends bc384a3858 Restore AddLog_P to max 700 chars
Changed maximum chars in ``AddLog_P`` logging restored from 128 to 700 (MAX_LOGSZ) to solve broken error messages
2021-01-23 13:21:17 +01:00
Theo Arends 204316bf1b Change force initial default state ``SetOption57 1``
Change force initial default state ``SetOption57 1`` to scan wifi network every 44 minutes for strongest signal (#10395)
2021-01-05 17:14:01 +01:00
Theo Arends dcbb3f1e0e Happy New Year 2021-01-01 13:44:04 +01:00
Theo Arends f004cfea60 Breaking change regarding MFRC522 and ILI9341
- Replaced MFRC522 13.56MHz rfid card reader GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_RC522_CS``
- Replaced ILI9341 GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_ILI9341_CS`` and ``GPIO_SPI_DC`` by ``GPIO_ILI9341_DC``
2020-12-29 17:42:53 +01:00
Theo Arends eaa9da7d11 Bump version to v9.2.0.1 2020-12-17 14:03:02 +01:00
Theo Arends e1963e98dc Breaking change KNX DPT9 to DPT14
- Version bump to 9.1.0.2
- Breaking change KNX DPT9 (16-bit float) to DPT14 (32-bit float) by Adrian Scillato (#9811, #9888)
2020-11-17 10:36:57 +01:00
Theo Arends cc69244a8f Changed platformio compiler option
Changed platformio compiler option `no target align` enabled for stage
2020-11-05 13:55:17 +01:00
Theo Arends cdf66b6eff Version bump 2020-11-05 13:33:17 +01:00
Theo Arends a96218fc1c v9.0.0.3
- Add TLS in binary tasmota-zbbridge (#9620)
- Add support for EZO CO2 sensors by Christopher Tremblay (#9619)
2020-10-25 14:46:13 +01:00
Theo Arends fc04c50674 Convert AdcParam parameters from versions before v9.0.0.2
- Command ``Gpio17`` replaces command ``Adc``
- Command ``Gpios`` replaces command ``Adcs``
2020-10-11 11:31:46 +02:00
Theo Arends dd95b4a8cd Bump dev version to 9.0.0.1 2020-10-02 12:22:01 +02:00
Theo Arends 5176e3ab02 Bump version to 8.5.0.1 2020-09-07 14:54:31 +02:00
Theo Arends 0f1e4fc917 Add command ``PowerDelta1`` to ``PowerDelta3``
- Bump version to 8.4.0.3
- Add command ``PowerDelta1`` to ``PowerDelta3`` to trigger on up to three phases (#9134)
2020-08-23 18:29:16 +02:00
Theo Arends 731ca297b0 Add better config corruption recovery
- Add better config corruption recovery (#9046)
- Remove support for 1-step upgrade from versions before 6.6.0.11 to versions after 8.4.0.1
2020-08-13 13:04:28 +02:00
Theo Arends 70c7f38a1f Release 8.4.0 2020-07-29 16:58:07 +02:00
Theo Arends 6b0870343b Change to limited support of Arduino IDE
Change to limited support of Arduino IDE as an increasing amount of features cannot be compiled with Arduino IDE
2020-07-16 18:21:19 +02:00
Theo Arends 6f52b0f7cc Reset version 2020-07-15 14:35:30 +02:00
Theo Arends 642fa216c2 Merge branch 'development' into pre-release 2020-07-04 12:04:41 +02:00
Theo Arends 83bbe757db Add command ``Module2``
Add command ``Module2`` to configure fallback module on fast reboot (#8464)
2020-06-17 14:06:46 +02:00
Theo Arends 715697cb32 Add ESP32 ethernet commands
Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3`` (#8503)
2020-06-16 18:36:49 +02:00
Theo Arends ef0b797686 Add basic support for ESP32 ethernet
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503)
2020-06-15 18:27:04 +02:00
Theo Arends 4c5b2f37fd Add initial support for Telegram
Add initial support for Telegram bot (#8619)
2020-06-11 17:30:33 +02:00
Theo Arends 855e054db8 Change Energy JSON data
- Bump version 8.3.1.2
- Change Energy JSON Total field from ``"Total":[33.736,11.717,16.978]`` to ``"Total":33.736,"TotalTariff":[11.717,16.978]``
- Change Energy JSON ExportActive field from ``"ExportActive":[33.736,11.717,16.978]`` to ``"ExportActive":33.736,"ExportActiveTariff":[11.717,16.978]``
- Add Three Phase Export Active Energy to SDM630 driver
2020-05-22 17:48:21 +02:00
Theo Arends ebbdb28e48 Bump version to 8.3.1.1 2020-05-18 17:06:11 +02:00
Theo Arends 2055d06825 Merge branch 'development' into pre-release 2020-05-18 10:06:12 +02:00
Theo Arends d7f6c78ed9 Add command ``DeviceName``
Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI
2020-05-17 17:10:17 +02:00
Theo Arends fff26f6538 Fix button default state
- Fix button default state
- Bump version 8.3.0.1
2020-05-14 15:32:27 +02:00
Theo Arends 4e05975b6c Sync with released 8.3.0 2020-05-14 12:40:48 +02:00
Theo Arends 5d18ad1c74 Add experimental basic support for ESP32
- Add experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt
- Bump version to 8.2.0.6
- This ESP32 upgrade breaks current ESP32 templates
2020-05-01 17:30:09 +02:00
Theo Arends 14040f601c Breaking Change Device Groups multicast address and port
- Breaking Change Device Groups multicast address and port  (#8270)
- Version bump 8.2.0.5
2020-04-25 11:20:48 +02:00
Theo Arends d3b2f8c489 Add config version tag
- Add config version tag
- Bump version 8.2.0.4
2020-04-17 11:57:09 +02:00
Theo Arends d080bb97b8 Prep release 8.3.0 2020-04-09 11:58:35 +02:00
Theo Arends 4b98e9dfb2 Merge branch 'development' into pre-release 2020-04-05 14:33:47 +02:00
Theo Arends d713468c0c Add support for longer template names
Add support for longer template names
2020-03-29 17:41:31 +02:00
Theo Arends dbc9f16ffc Add support for up to four MQTT GroupTopics
- Bump version to 8.2.0.2
- Add support for up to four MQTT GroupTopics using the same optional Device Group names (#8014)
2020-03-28 16:48:36 +01:00
Theo Arends b6fc31ebb0 Bump version 8.2.0.1
- Bump version 8.2.0.1
- Change HM-10 sensor type detection and add features (#7962)
2020-03-21 15:46:28 +01:00
Theo Arends 211520b1c8 Bump version 8.2.0 2020-03-21 11:22:22 +01:00
Theo Arends c62a0318cd Bump version to 8.1.0.11
- Bump version to 8.1.0.11
- Add HAss Discovery support for Button and Switch triggers by Federico Leoni (#7901)
2020-03-13 12:00:52 +01:00
Theo Arends e3be05756a Merge branch 'development' into release 2020-03-06 12:18:08 +01:00
Theo Arends 5cfe247611 Change default my_user_config.h driver and sensor support
Change default my_user_config.h driver and sensor support removing most sensors and adding most drivers
2020-02-27 15:10:42 +01:00
Theo Arends 9b1fc4342b Revert wifi connectivity stability introduced in 8.1.0.5
Revert wifi connectivity stability introduced in 8.1.0.5 (#7746, #7602, #7621)
2020-02-20 11:24:35 +01:00
Theo Arends 8079ee9749 Change MQTT message size
Change MQTT message size with additional 200 characters
2020-02-12 18:00:53 +01:00
Theo Arends edadaa284f Bump version to 8.1.0.7 2020-02-10 15:20:38 +01:00
Theo Arends 186d3fcb4d Add support for Shelly Add-On adapter
Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter
2020-02-05 16:28:56 +01:00
Theo Arends ff01f934e2 Bump version 8.1.0.5 2020-01-26 14:20:40 +01:00