79fdc265b7
Minor fixes to Zigbee friendly names
2020-01-19 22:59:02 +01:00
588f3ca0b2
Merge pull request #7557 from BASM/7556_i2csetdevice
...
i2c: I2cSetDevice wrong behavior
2020-01-19 15:31:56 +01:00
e03a14ce21
i2c: I2cSetDevice wrong behavior
...
Most drivers do not expect address blocking after calling i2cSetDevice.
I2cSetActive removed from I2cSetDevice. All drivers waiting for this call are fixed.
refs #7556
2020-01-19 16:15:18 +03:00
6d5b0ed622
Remove redundant code
2020-01-19 14:12:25 +01:00
6c83787210
Lower mqttlog stack usage
2020-01-19 12:22:40 +01:00
45ed0257b6
Better support for Prefix1 equals Prefix2
2020-01-18 16:57:48 +01:00
5716d08de9
Refactor MQTT Logging and publish
2020-01-18 15:34:01 +01:00
18ce64f813
Add Zigbee persistence and friendly names
2020-01-18 00:02:01 +01:00
50a25aeb7c
Experimental DS18x20 for Shelly
...
Experimental DS18x20 for Shelly (#7469 )
2020-01-17 17:51:27 +01:00
60c5a1a83a
Merge pull request #7539 from Staars/development
...
add virtual serial port via TCP for ublox-GPS-modules
2020-01-17 17:15:33 +01:00
be5c7a4367
Document and add errorchecks to OTA
...
Document and add errorchecks to OTA
2020-01-17 17:14:53 +01:00
400d4a0604
add virtual serial port via TCP
2020-01-17 16:44:43 +01:00
e8ce1eb641
Fix OTA minimal gzipped detection
...
Fix OTA minimal gzipped detection regression from 8.1.0.3
2020-01-17 15:38:03 +01:00
65d1f3aace
Fix PowerDelta calculation
...
Fix PowerDelta calculation not detecting zero power (#7515 )
2020-01-17 10:12:57 +01:00
920501fef9
Implement new Tuya multi dpid protocol. Fixes #7489
2020-01-16 15:19:57 +00:00
adb2dbbcbd
Fix ColorTemp brightness
2020-01-16 14:37:10 +01:00
a6e95211cc
Add more web page sliders
...
Add web page sliders when ``SetOption37 128`` is active allowing control of white(s)
2020-01-16 14:22:39 +01:00
aa170fefd4
Merge pull request #7521 from dgwynne/HSColor
...
Make the B or brightness part of the HSBColor command optional
2020-01-16 13:00:26 +01:00
0755ad488e
Bump version to 8.1.0.4
2020-01-16 11:35:48 +01:00
5b797a8f4e
Add new SwitchMode options
...
Add ``SwitchMode 8`` ToggleMulti, ``SwitchMode 9`` FollowMulti and ``SwitchMode 10`` FollowMultiInverted (#7522 )
2020-01-16 10:39:59 +01:00
6ab5c7432e
patch-1
...
typos
2020-01-15 16:12:55 +01:00
e327236485
New switchmodes TOGGLEMULTI, FOLLOWMULTI and FOLLOWMULTI_INV
2020-01-15 13:05:00 +01:00
a2c8ea9d65
Make the B or brightness part of the HSBColor command optional
...
This makes it easier (possible?) to use the HSBColor with hs_command_topic
in Home-Assistant, which in turn allows completely independent control
of the color part of an RGBW or RGBWW bulb.
2020-01-15 22:14:47 +11:00
338499d8e2
Fix unknown command topic
2020-01-14 16:57:55 +01:00
77191f2fe9
Simplified TimeDifference (saves 16 bytes)
2020-01-14 16:41:47 +01:00
ceef563414
Add simple check for serialreceived JSON
...
Add simple check for serialreceived JSON (#7506 )
2020-01-14 15:58:56 +01:00
fe17be62cc
Add user control over vertical console size
...
Add user control over vertical console size (#7507 )
2020-01-14 15:38:16 +01:00
81d58d69b6
Revert "Add user control over vertical console size"
...
This reverts commit 423b6f251b
2020-01-14 14:42:30 +01:00
423b6f251b
Add user control over vertical console size
...
Add user control over vertical console size (#7507 )
2020-01-14 14:33:27 +01:00
64d3d0c075
Change MQTT reporting of instantaneous shutter position from tele to stat
2020-01-14 13:32:51 +01:00
0db458c774
Fix exception 9 restart on log message
...
Fix exception 9 restart on log message in Ticker interrupt service routines NTP, Wemos and Hue emulation (#7496 )
2020-01-14 12:47:48 +01:00
fc9fafc19b
Merge pull request #7510 from to-scho/hotfix/shutterlock_webbutton
...
Show webbutton label '-' when shutter is locked
2020-01-14 11:26:01 +01:00
bc83aad8bd
Show webbutton label '-' when shutter is locked
2020-01-14 11:00:22 +01:00
0327d7f4b4
New command ShutterEnableEndStopTime
2020-01-13 12:00:34 +01:00
d00bea84ec
Fix target shutter position inaccuracy
...
Introduced numerical rounding when calculating between "%" and "time" position values
2020-01-13 09:48:29 +01:00
5840f71af9
Fix char[] allocation
2020-01-12 23:31:57 +01:00
80773f74c7
initialize shutters when interlock is changed
2020-01-12 15:41:51 +01:00
8cf411a1c3
New command ShutterLock
...
Command shutterlock<x> 1 locks shutter <x> movement. Any ongoing movement is still finished when called. Subsequent calls of shutter commands about movement, web buttons and shutter buttons are blocked when shutter is locked. shutterlock<x> 0 unlocks shutter <x>.
2020-01-12 14:18:15 +01:00
0e0d8190fa
Change some commands displaying all items
...
Change commands ``Prefix``, ``Ssid``, ``StateText``, ``NTPServer``, and ``FriendlyName`` displaying all items
2020-01-12 13:10:21 +01:00
e7b061ce5a
Fix Tuya PowerOn state
...
Fix Tuya PowerOn state (#7412 )
2020-01-11 15:39:56 +01:00
20c58f5f20
Fix typo in gauge metric type ( #7216 )
2020-01-11 10:15:30 +03:00
be85d3a060
Fix ``WakeUp <x>`` ignores provided value ( #7473 )
2020-01-10 20:54:13 +01:00
2dde0329ed
Merge pull request #7466 from to-scho/hotfix/shutterbuttons_no_key_restrictions
...
Enable WIFI setup, restart and reset via ShutterButtons
2020-01-09 14:52:54 +01:00
a1ccd0131d
Enable WIFI setup, restart and reset via ShutterButtons
...
When no button restriction is given and ALL shutter buttons are pressed simultaneously more than 5 times or hold simultaneously follow Tasmota's basic button behavior.
2020-01-09 14:48:23 +01:00
250e3f3dc4
Fix display of wifi scan signal strength
...
Fix display of wifi scan signal strength
2020-01-09 14:35:03 +01:00
d0774995de
Allow duplicate names but different channel in wifi scan
...
Allow duplicate names but different channel in wifi scan
2020-01-09 14:19:19 +01:00
a6dcf46771
Move heap to stack
2020-01-09 11:35:01 +01:00
a52c059cdc
Merge pull request #7465 from to-scho/hotfix/shutterbuttons_short_command
...
Add MQTT field to short shutterButton command syntax
2020-01-09 10:42:18 +01:00
3675388148
Add MQTT field to short shutterButton command syntax
...
Align code to latest command doc suggestion
2020-01-09 10:35:27 +01:00
2c6659fca4
Fix labeling of web buttons for shutters
...
Instead of switching power of the shutter relais web buttons will issue shutter commands to work right when in shuttermode 1. Up down labels arrow up/down fixed for more than one shutter.
2020-01-09 09:17:39 +01:00
7c68d7a754
Improve random color cycle for scheme 4
...
Improve random color cycle for scheme 4 (#7273 )
2020-01-08 17:45:48 +01:00
edf1584431
Improve random color cycle for scheme 4
...
Improve random color cycle for scheme 4 (#7273 )
2020-01-08 16:45:43 +01:00
2c23364d48
Fix DDS238-2 total energy
...
Fix DDS238-2 total energy (#7457 )
2020-01-08 11:43:39 +01:00
8db49a0fe3
Add support for tasmota-minimal.bin.gz
2020-01-07 17:28:06 +01:00
ca7776573a
Remove debug info
2020-01-07 17:10:07 +01:00
1c0db7e689
Refactor version compatibility
2020-01-07 17:01:48 +01:00
9d881b9701
Update IRremoteESP8266 lib updated to v2.7.2
2020-01-06 17:27:36 +01:00
95fc96d563
Add support for gzipped binaries
...
Add support for gzipped binaries
2020-01-06 14:52:04 +01:00
4a432fc2cd
Fix for Domoticz color temp ( #7428 )
...
Fix for Domoticz color temp (#7428 )
2020-01-04 18:24:33 +01:00
61fe727685
Possible fix for Domoticz color temp
...
Possible fix for Domoticz color temp (#7428 )
2020-01-04 17:29:04 +01:00
5c97cdc12e
Merge pull request #7437 from to-scho/hotfix/shutterbuttons_inverted_command
...
inverted ShutterButton command
2020-01-04 16:42:00 +01:00
81d3b35d0c
Merge pull request #7436 from to-scho/hotfix/shutterbuttons
...
Fixed exception with ShutterButton
2020-01-04 16:41:24 +01:00
f6f4a3f88f
inverted ShutterButton command
...
As discussed in doc repo this is the code for my inverted shutter button command.
2020-01-04 16:24:45 +01:00
cea20feab3
Fixed exception with ShutterButton
...
When a button assigned to a shutter is pressed before any command is issued an exception occured
2020-01-04 16:10:03 +01:00
49137ec79f
Refactor shutters
2020-01-04 15:09:57 +01:00
8be7dbe235
Fix shutter JSON
2020-01-04 14:20:41 +01:00
a1df6b9db9
Merge pull request #7431 from kabongsteve/shutter-improvements
...
Improve Shutter operation for HASS, MQTT and Internationalization
2020-01-04 13:54:58 +01:00
aa665c1439
Add SetOption82 to limit the CT range for Alexa to 200..380
2020-01-04 11:01:44 +01:00
1b451e722f
Improve multiple shutter operation and MQTT
2020-01-04 13:38:56 +11:00
4f74c70270
Add LightPowerIRAM() for rotary interrupt handler
2020-01-03 17:57:47 +01:00
b82d1fdcc3
Move all Rotary interrupt code to iRAM
...
Move all Rotary interrupt code to iRAM (#7410 )
2020-01-03 17:07:40 +01:00
8c2ff7237e
Fix Arduino_OTA compile error
...
Fix Arduino_OTA compile error (#7413 )
2020-01-03 16:50:56 +01:00
9249958d90
Merge branch 'development' into bmp
2020-01-03 16:31:39 +01:00
319965fba2
Merge pull request #7423 from jpenninkhof/development
...
Reset SSD1306 before initialisation when OLED reset pin is set
2020-01-03 16:08:34 +01:00
d15969bd1e
Reset before initialisation of the SSD1306 when OLED reset pin is set
...
If an OLED Reset pin has been selected using the PIN configuration, it makes sense to also send a reset signal to this pin before initialization of the display. The current value 0 doesn't send this signal, not even when a reset pin has been selected. Hence the change of value 0 into reset_pin >= 0. If no reset pin was set, the value of this variable is -1.
2020-01-03 10:07:42 +01:00
0ab3ba6fab
Fix wrong gamma correction for Module 48 lights (PWM5 for CT)
2020-01-02 22:36:27 +01:00
06f053c172
- Add support to BMP driver to enter reset state (sleep enable)
2020-01-02 22:51:15 +02:00
6a54eef50a
- Add support to BMP driver to enter reset state (sleep enable)
...
- Add support to BMP driver to enter reset state (sleep enable) when deep sleep is used in Tasmota
2020-01-02 22:40:14 +02:00
356e005909
BMPxxx - Enter power on state before deep sleep
2020-01-02 22:38:18 +02:00
894950ca4e
Fix wrong JSON sensor message
2020-01-02 17:40:00 +01:00
c4f6a359a7
Add experimental support for NRF24L01 as BLE-bridge
...
Add experimental support for NRF24L01 as BLE-bridge for Mijia Bluetooth sensors by Christian Baars (#7394 )
2020-01-02 16:58:20 +01:00
5489c91172
Merge pull request #7394 from Staars/nrf24_PR
...
BLE-bridge for certain Mijia-Bluetooth-sensors via NRF24L01
2020-01-02 16:28:22 +01:00
1e0550e750
Add command ShutterButton <parameters>
...
Add command ``ShutterButton <parameters>`` to control shutter(s) by to-scho (#7403 )
2020-01-02 15:12:59 +01:00
eb7e7d45b2
Merge pull request #7403 from to-scho/feature/initial_shutter_button_support
...
Initial support for shutter button control
2020-01-02 14:48:13 +01:00
044fae2a6e
Update settings.h
2020-01-02 14:47:33 +01:00
8e3540d58d
Merge pull request #7405 from to-scho/hotfix/shutter_calibration_command_add_response
...
Add response to ShutterCalibration command
2020-01-02 14:40:25 +01:00
7ca423da92
Merge pull request #7406 from to-scho/hotfix/shutter_pos_to_percentage_fix
...
Wrong shutter percentage reporting
2020-01-02 14:39:19 +01:00
7ea9204425
Add some info to Prometheus file
2020-01-02 14:17:49 +01:00
a9a5c33327
Wrong shutter percentage reporting
...
With calibrated shutters and ShutterPosition<x> 100 the resulting position may not be 100. This is due to 2 issues. a) percentage is calculated wrong from position due to numerical precision. b) real_position and subsequently position after movement is slightly smaller than max_position.
a) is fixed here by avoiding calculation when position is equal to calibration point
b) open, not fixed here. Issue further depends on start_position which makes it hard to reproduce. Maybe 'stop_position_delta=20' results is real_position not reaching max_position.
2020-01-02 12:46:12 +01:00
f2a89605af
Add response to ShutterCalibration command
...
When ShutterCalibration<x> is called without any arguments no response was given before that allows to read out setting like for other commands. Workaround was to call ShutterRelay<x> <y>.
2020-01-02 12:37:07 +01:00
406a5a15f5
Initial support for shutter button control
...
New command "ShutterButton<x> <a> <b> <c> <d> <e> <f> <g> <h> <i> <j>" added that allows to assign a tasmota button <x> to control shutter <a>.
Single press button shutter is set to position <b>. Double press button shutter is set to position <c>. Tripple press button shutter is set to position <d>. Hold button shutter is set to position <e>. Disabling any button action is given by <b> ... <e> equal to "-". Any press of the button while the shutter is moving will immediately stop that shutter.
Global steering of all your shutters at home is supported by MQTT. By any button action an MQTT command can be initiated to the <grouptopic> of the device. For single press button this can be enabled by <f> equal to "1". Disabling is indicated by <f> equal to "0". Double to hold actions are given by <g> ... <i>, correspondingly. When <j> is equal to "0" only "cmnd/<grouptopic>/Shutterposition<y> ..." with <y>=<x> is fired. When <j> is equal to "1" <y>=1...4 is used to control any shutter number of a tasmota device having same <grouptopic>.
Easy setup for an "up" button:
ShutterButton<x> <a> up (same as ShutterButton<x> <a> 100 50 74 100 0 0 0 1 1)
Single press will move shutter up to 100%, double press to 50% and tripple press to 74%. Holding the button for more than the hold time (SetOption32) moves all shutters with same <grouptopic> up to 100%.
Easy setup for an "down" button:
ShutterButton<x> <a> down (same as ShutterButton<x> <a> 0 50 24 0 0 0 0 1 1)
Single press will move shutter down to 0%, double press to 50% and tripple press to 24%. Holding the button for more than the hold time (SetOption32) moves all shutters with same <grouptopic> down to 0%.
Easy setup for an "updown" button:
ShutterButton<x> <a> updown (same as ShutterButton<x> <a> 100 0 50 - 0 0 0 0 0)
Single press will move shutter up to 100%, double press down to 0% and tripple press to 50%. No hold action and no other shutter control by MQTT.
2020-01-02 11:23:11 +01:00
21ea26e132
Update my_user_config.h
2020-01-02 09:54:58 +01:00
ee7e9078f0
initial commit
2020-01-01 19:09:20 +01:00
01b5df9651
Add optional support for Prometheus
...
Add optional support for Prometheus using file xsns_91_prometheus.ino (#7216 )
2020-01-01 17:17:10 +01:00
579a76ced6
Fix Improved fade linearity with gamma correction
2020-01-01 16:11:36 +01:00
287b3b97f1
Fix some display issues
...
- Fix LCD line and column positioning (#7387 )
- Fix Display handling of hexadecimal escape characters (#7387 )
2020-01-01 15:13:58 +01:00
b05301b149
Refactor change
2019-12-31 17:24:47 +01:00
c13b755a59
Fix addition of backlog to IF clause
...
Fix addition of backlog to IF clause (#7342 )
2019-12-31 17:17:30 +01:00
5281725b9b
Raise max valid load from 3.68 to 4kW
...
Raise max valid load from 3.68 to 4kW (#7155 )
2019-12-31 15:34:27 +01:00
8aa9109656
Happy New Year
...
Happy New Year
2019-12-31 14:23:34 +01:00
Hadinger
Theo Arends
Leonid Muravjev
Staars
Shantur Rathore
to-scho
David Gwynne
Roman Lomonosov
kabongsteve
Jan Penninkhof
Andre Thomas