Paul C Diem
caaf7ac39c
Make button press rules override PWM Dimmer functions
2020-10-20 10:48:49 -05:00
Paul C Diem
f075a89d6b
Add PWM Dimmer multi-press and ledmask support
2020-10-19 20:12:41 -05:00
Theo Arends
7bc8956d86
Changed management of serial baudrate
...
Changed management of serial baudrate (#9554 )
2020-10-16 15:18:16 +02:00
Theo Arends
490e7d838e
Fix Template using ``#define USER_TEMPLATE``
...
Fix Template using ``#define USER_TEMPLATE`` (#9506 )
2020-10-10 12:20:15 +02:00
Theo Arends
0c90f71e00
Fix ADC initalization sequence
...
Fix ADC initalization sequence (#9473 )
2020-10-06 12:12:14 +02:00
Theo Arends
677bb85ecd
Fix ledlink blink when no network connected
...
Fix ledlink blink when no network connected regression from 8.3.1.4 (#9292 )
2020-10-04 17:08:11 +02:00
Theo Arends
a9630b9d05
Change pulsetime to allow use for all relays
...
Change pulsetime to allow use for all relays with 8 interleaved so ``Pulsetime1`` is valid for Relay1, Relay9, Relay17 etc. (#9279 )
2020-10-02 17:32:45 +02:00
Theo Arends
c00d7035d9
Redesign GPIO to 16-bit
2020-09-29 18:10:21 +02:00
Theo Arends
805f93cfab
Redesign GPIO to 16-bit
2020-09-29 14:08:48 +02:00
Theo Arends
46cbe13e9b
Fix ESP32 compilation
2020-09-25 18:34:14 +02:00
Theo Arends
9cbd2d531d
Initial GPIO redesign
2020-09-25 18:15:31 +02:00
Theo Arends
ace6097052
Allow software SPI without hardware SPI
2020-08-23 15:34:19 +02:00
Theo Arends
f268697e54
Add command ``Restart 2`` to halt system
...
Add command ``Restart 2`` to halt system. Needs hardware reset or power cycle to restart (#9046 )
2020-08-10 16:19:44 +02:00
Paul C Diem
c3112b20e0
Fix missed merge of device_group_count initialization. Rename remote_device_mode setting to multiple_device_groups.
2020-08-09 10:16:15 -05:00
Theo Arends
b8973d64d0
Merge pull request #9023 from stefanbode/patch-16
...
Added exposure of MCP Out Pins as Relays
2020-08-03 18:23:51 +02:00
Theo Arends
a3445e5b5f
Add ESP32 ADC framework
2020-08-03 18:21:34 +02:00
stefanbode
d16cdb108c
Added required hooks
2020-08-03 18:08:49 +02:00
Theo Arends
1d990ad091
Fix ESP32 PWM range
2020-08-03 11:52:25 +02:00
Theo Arends
e1b825ed75
Fix ESP32 PWM resolution calculation
2020-08-02 12:40:15 +02:00
Theo Arends
a84ebe552a
Refactor rules processing
2020-07-20 17:24:51 +02:00
Theo Arends
eeed6768d0
Third try to fix counter interrupt storm
2020-07-20 11:20:58 +02:00
Theo Arends
934ca43463
Remove Arduino ESP8266 Core support before 2.7.1
...
Remove Arduino ESP8266 Core support for versions before 2.7.1
2020-07-17 11:49:56 +02:00
Theo Arends
84ee6393a5
Add second rotary support
...
Add second rotary support default used for CW light control when first rotary is used for RGB light control (#8864 )
2020-07-13 15:10:23 +02:00
Theo Arends
b5f45aa295
Fix ESP32 SPI config
2020-06-20 17:58:21 +02:00
Norbert Richter
9b44a369d8
Fix some json unescapes
2020-06-19 12:33:31 +02:00
Theo Arends
daef0a759d
Stop blinks when no network configured
2020-06-15 22:40:15 +02:00
Theo Arends
ef0b797686
Add basic support for ESP32 ethernet
...
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503 )
2020-06-15 18:27:04 +02:00
Paul C Diem
3d42fae8bd
Fix SO88 incoming power state check
2020-05-29 18:55:33 -05:00
Staars
55e56fee43
Touch pin as button for ESP32
2020-05-27 15:59:32 +02:00
Paul C Diem
bc6d7ceb87
Add support for SetOption88 to put each relay in a separate device groups
2020-05-26 22:07:25 -05:00
Theo Arends
32a39b828c
Merge pull request #8553 from phjr/fix-device-power-on-esp8266
...
fix default power state logic invoked even if already serviced by a d…
2020-05-26 18:31:32 +02:00
Peter Halicky
f80d2ede3a
fix default power state logic invoked even if already serviced by a driver
2020-05-26 18:20:46 +02:00
Theo Arends
66233b1749
Add support for full MAC address
...
Add support for unique MQTTClient (and inherited fallback topic) by full Mac address using ``mqttclient DVES_%12X`` (#8300 )
2020-05-26 17:08:13 +02:00
Theo Arends
bacb730b53
Fix escape of non-JSON received serial data
...
Fix escape of non-JSON received serial data (#8329 )
2020-05-26 12:35:21 +02:00
Matthijs Abma
7210934774
Cleanup code and only allocate buffer when needed
2020-05-24 17:47:57 +02:00
Matthijs Abma
a4ce4830e8
Encode content when not raw or json
2020-05-24 17:47:57 +02:00
Matthijs Abma
7f18e1e8e3
Split logic for adding char to buffer and sending
...
the buffer, to make sure the char doesn't get
lost when the buffer is full
2020-05-23 17:44:49 +02:00
Matthijs Abma
2626345662
Store if current byte is delimiter for later reuse
2020-05-23 17:44:49 +02:00
Theo Arends
aafa0862ab
Refactor LedPwm code
2020-05-23 13:09:16 +02:00
George
e780f25283
Gamma correction
...
Implement changes proposed by @s-hadinger review.
* Use 0-255 range in settings
* Apply gamma correction from xdrv_light & use changuintscale helper fn (as per pwm light routine)
2020-05-23 17:13:04 +10:00
George
603b628f97
Add pwm mode masking
...
* Extra setting & command to set - allows masking of pwm mode. Use case is for leds attached to buttons for seeing at night; this way user can combine both pwm and digital leds (i.e. pwm for the button leds but non-button status leds can stay on/off).
2020-05-20 13:23:54 +10:00
George
e21cbfdc5d
More sensible behaviour
...
* When setting PWM values, updates all the LEDs (instant response). Uses led_power values.
* If LEDLINK not set, but LED1 is, LED1 is the status led. When turning on/off, setledlink uses digitalwrite (which does not respect the new pwm operation). In this case only, we will use the setledpoweridx instead of digitalwrite - costly (every 250ms this runs), but edge case / legacy. Allows more intuitive operation - if we blink an LED with the max and min PWM limits, we'd expect it to respect these. In this case, blink will also now update the led_power status, which keeps this accurate e.g. if ledpower 1 cmnd was sent, then blink occurred, led_state would read a 1 for that bit but the led would be off (but nothing was reading it for status so it didn't cause any trouble). Leaving digitalwrite when LEDLINK is defined as this is more efficient and the use case for pwm leds is to find buttons - link indicator would become more ambiguous for no benefit.
2020-05-20 13:23:53 +10:00
George
fb179c27af
Fixes
...
* Setting commands don't update if no data is sent
* Didn't understand how pin mapping worked duh. Fixed.
2020-05-20 13:23:53 +10:00
George
ce2696fef0
Fix compile errors
...
Missing brackets and semicolons of course. Blame python.
2020-05-20 13:23:53 +10:00
George
a305f435e8
First pass at led pwm settings
...
* Added settings for ledpwm_on and ledpwm_off with defaults that mimic current digitalwrite function
* Changed ledpoweridx from digitalwrite to analogwrite
* Add commands to change new settings
2020-05-20 13:23:52 +10:00
Theo Arends
cd7f719563
Add more functionality to ``Switchmode`` 11 and 12 ( #8450 )
...
Add more functionality to ``Switchmode`` 11 and 12 (#8450 )
2020-05-19 15:52:10 +02:00
Theo Arends
4aa1c18d82
Revert uart buffer size increase
...
Revert uart buffer size increase but visit uart buffer reads more often to solve possible uart buffer overrun caused by sleep
2020-05-11 16:45:22 +02:00
Theo Arends
125ee62ff3
Add Serial buffer overrun detection
...
Add Serial buffer overrun detection and fix serial corruption by increasing uart serial buffer to 520
2020-05-11 15:27:29 +02:00
Theo Arends
23a9948d29
Fix ESP32 compilation
2020-05-04 11:07:52 +02:00
Theo Arends
d410420110
Tasmotify ESP32 webcam
2020-05-03 18:37:12 +02:00
Theo Arends
99178c2f5d
Merge pull request #8315 from gemu2015/esp32-pwm
...
esp32 initial pwm support
2020-05-01 18:04:43 +02:00
gemu2015
bf29904b7a
esp32 initial pwm support
2020-05-01 17:38:40 +02:00
Theo Arends
892be892fa
Remove gpio to pin support
2020-05-01 17:37:56 +02:00
Theo Arends
7177c7d8e0
Change ESP32 pin allocation part 4
2020-05-01 16:47:41 +02:00
Theo Arends
ef61668037
Change ESP32 pin allocation part 2
2020-04-29 17:44:03 +02:00
Theo Arends
d805803daa
Change pin array names
...
Change pin array names to block unwanted use of direct access
2020-04-29 14:01:02 +02:00
Theo Arends
60e7a73b60
Switch from GPIO array to Pin array
2020-04-28 14:42:47 +02:00
Theo Arends
3fef91d6ca
Change pin handling part 6
2020-04-27 17:28:05 +02:00
Theo Arends
ae4ec4325d
Change pin handling part 5
2020-04-27 17:16:52 +02:00
Theo Arends
c939077514
Change pin handling part 3
2020-04-27 12:54:07 +02:00
Theo Arends
5d9be9a4d0
Fix pin handling part 1
2020-04-27 10:35:38 +02:00
Theo Arends
c9149b53c5
Change pin handling part 1
2020-04-26 17:33:27 +02:00
Theo Arends
104e3c4838
Implement ARRAY_SIZE macro
2020-04-25 11:37:36 +02:00
Theo Arends
9ed8e7c254
Fix internal array size checks
2020-04-24 17:39:26 +02:00
Theo Arends
5f75a4c354
Fix future compile error ;-)
2020-04-24 15:50:27 +02:00
Theo Arends
be1fb3756c
Change ESP32 freeHeap to MaxAllocHeap
2020-04-22 16:07:52 +02:00
Theo Arends
e8f3d1d986
Increase ESP32 compatibility
...
Increase ESP32 compatibility (breaks current ESP32 configuration again!)
2020-04-13 17:45:06 +02:00
Theo Arends
93fd5dd618
Add experimental minimal support for ESP32
...
Add experimental minimal support for ESP32 (#8110 )
2020-04-10 18:24:08 +02:00
Theo Arends
d8f750ebb9
Add legacy support
2020-04-09 14:00:02 +02:00
Stephan Hadinger
7a6628d903
Add command ``SetOption41 <x>`` to force sending gratuitous ARP every <x> seconds
2020-04-07 14:07:00 +02:00
Theo Arends
caff54da7c
Fix unquoted non-json data
...
Fix unquoted non-json data (#8040 )
2020-04-01 14:39:43 +02:00
Theo Arends
dbc9f16ffc
Add support for up to four MQTT GroupTopics
...
- Bump version to 8.2.0.2
- Add support for up to four MQTT GroupTopics using the same optional Device Group names (#8014 )
2020-03-28 16:48:36 +01:00
Norbert Richter
898fff9dbc
Add multiple GroupTopic<x> (x=1-4) (default disabled)
...
grouptopic (1-4) subscription even when USE_DEVICE_GROUPS
is not used.
2020-03-28 11:17:16 +01:00
Theo Arends
aede481b61
Move not used GPIO init up in chain
2020-03-25 11:29:46 +01:00
Theo Arends
5471de6f1c
Change GPIO initialization solving possible Relay toggle on (OTA) restart
...
Change GPIO initialization solving possible Relay toggle on (OTA) restart
2020-03-22 17:42:32 +01:00
Theo Arends
0a0afe3615
Add Dew point to more sensors
...
Add Dew point to more sensors and refactor JSON Temperature and Humidity message
2020-03-17 16:29:59 +01:00
Theo Arends
566bc47af4
Add Dewpoint to Temp/Hum sensors Prt. 1
...
- Add Dewpoint to Temp/Hum sensors Prt. 1
- Update AHT10 driver (#7930 )
2020-03-16 16:52:22 +01:00
Paul C Diem
fec34434a6
Merge branch 'development' of https://github.com/arendst/Tasmota into pwm-dimmer3
2020-03-15 18:26:46 -05:00
Theo Arends
1a825db2b9
Fix ghost logging
2020-03-14 17:45:36 +01:00
Paul C Diem
a72acf37fe
Use Light module to manage PWM, Rework multi-button sequences
2020-03-13 12:08:44 -05:00
Theo Arends
0006d44e63
Fix HASS button discovery
2020-03-04 18:02:27 +01:00
Theo Arends
71e702c659
Change minimal filename construction
2020-03-04 15:36:37 +01:00
Theo Arends
71d810aac4
Update Tx2x Sensor
...
Update Tx2x Sensor with command SpeedUnit (#7843 )
2020-03-02 15:51:33 +01:00
Norbert Richter
94dbc4d1a2
refactor TX2x sensor driver
2020-02-29 16:11:59 +01:00
Paul C Diem
c0a5156d8f
Initial pwm dimmer support
2020-02-24 07:19:15 -06:00
Paul C Diem
8182d6ef7b
Merge branch 'development' of https://github.com/pcdiem/Tasmota into device-groups
2020-02-21 09:15:47 -06:00
Paul C Diem
f409d7258e
Initial device groups support (power and light)
2020-02-21 09:09:21 -06:00
Theo Arends
5e4d8e5641
Fix relation between RSSI and signal strength
...
Fix relation between RSSI and signal strength
2020-02-20 10:07:00 +01:00
Theo Arends
504570d5d5
Fix MaxPower functionality
...
Fix MaxPower functionality (#7647 )
2020-02-09 16:21:48 +01:00
Theo Arends
48d70bc7bb
Add Buzzer commands
...
Add command ``Buzzer -1`` for infinite mode and command ``Buzzer -2`` for following led mode (#7623 )
2020-02-06 16:25:37 +01:00
Theo Arends
709fa19eb2
Merge pull request #7623 from to-scho/feature/buzzer_modes
...
Buzzer extensions
2020-02-06 16:05:18 +01:00
Theo Arends
d779a2b9b4
Add switch modes 11 and 12
...
Add switch modes 11 (PUSHHOLDMULTI) and 12 (PUSHHOLDMULTI_INV) (#7603 )
2020-02-06 14:53:35 +01:00
to-scho
72935bdcc6
Buzzer extensions
...
Add infinite mode (count==-1), add follow led mode (count==-2), add count>1 for tune playback
2020-01-28 11:22:36 +01:00
Theo Arends
45ed0257b6
Better support for Prefix1 equals Prefix2
2020-01-18 16:57:48 +01:00
Theo Arends
5716d08de9
Refactor MQTT Logging and publish
2020-01-18 15:34:01 +01:00
Theo Arends
be5c7a4367
Document and add errorchecks to OTA
...
Document and add errorchecks to OTA
2020-01-17 17:14:53 +01:00
Theo Arends
e8ce1eb641
Fix OTA minimal gzipped detection
...
Fix OTA minimal gzipped detection regression from 8.1.0.3
2020-01-17 15:38:03 +01:00
Theo Arends
5b797a8f4e
Add new SwitchMode options
...
Add ``SwitchMode 8`` ToggleMulti, ``SwitchMode 9`` FollowMulti and ``SwitchMode 10`` FollowMultiInverted (#7522 )
2020-01-16 10:39:59 +01:00
Theo Arends
ceef563414
Add simple check for serialreceived JSON
...
Add simple check for serialreceived JSON (#7506 )
2020-01-14 15:58:56 +01:00
Theo Arends
0db458c774
Fix exception 9 restart on log message
...
Fix exception 9 restart on log message in Ticker interrupt service routines NTP, Wemos and Hue emulation (#7496 )
2020-01-14 12:47:48 +01:00