mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
18,347 Commits 6 Branches 113 Tags 1.2 GiB
Commit Graph

276 Commits

Author SHA1 Message Date
Theo Arends db3fdc5118 Add ESP32 support for eigth energy phases/channels 
- ESP32 support for eigth energy phases/channels
- ESP32 command ``EnergyCols 1..8`` to change number of GUI columns
- ESP32 command ``EnergyDisplay 1..3`` to change GUI column presentation
- support for SEN5X gas and air quality sensor by Tyeth Gundry (#17736)
 2023-01-29 16:09:13 +01:00
Tyeth Gundry 2ed602057c
Add SEN5X to I2C devices (#17736) 2023-01-29 08:06:25 +01:00
Theo Arends 78fe958d89 Fix energy dummy supporting 8 channels 2023-01-28 13:47:37 +01:00
Theo Arends f064250d9a Update change logs 
Version bump to v12.3.1.5
 2023-01-27 16:59:54 +01:00
Theo Arends c85003c67d Prep Shelly Pro 4PM 2023-01-21 14:30:35 +01:00
Theo Arends aa78ffb733 Prep Shelly Pro 4PM 2023-01-20 14:28:58 +01:00
Theo Arends 82b6d1ee91 Bump version to v12.3.1.4 2023-01-15 17:45:59 +01:00
Theo Arends 7a97fa4a19 Fix BMP support on two busses 
Fix BMP support on two busses (#17643)
 2023-01-15 17:14:54 +01:00
Theo Arends f9177dfa3a Revert CSE7766 8N1 support - not needed 2023-01-10 09:48:49 +01:00
Theo Arends a4fe1b88f9 Add HLW8032 8N1 2023-01-09 11:04:52 +01:00
David Gwynne 17d68750d9
WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver (#17626) 
* WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver

The main difference is this driver does not try and wire MCU data points
(Dps) into the tasmota power/light/etc controls. Instead each Dp ends up
being relayed directly to MQTT and the rules subsystem. If you want to
change the state of something wired up to the MCU, you send tuyamcu
specific commands to manipulate the Dp.

Each Dp gets a type and id specific topic that is sent to MQTT. eg, Dp
id 1 type bool looks like tele/%topic%/TUYAMCUBOOL1. To change state you
send a TuyaMCUBool1 command (ie, the command index value is used as the
DpId, which is nice and symmetrical) with the new value.

Currently Rules operate on TuyaMCU#TypeDpid things, eg, "rule1 on
TuyaMCU#Bool1 do power %value% endon" toggle the power on the tasmota
device when the state of the thing on the MCU changes too.

The most obviously missing stuff at the moment is:

- better relaying of the wifi/mqtt status to the MCU
- handling wifi reset requests from the MCU
- low power stuff?
- support for sending status updates and device info queries.
- restarting the tuya mcu state machine?
- restarting the rx state machine when no bytes are rxed for a period of
  time
- time sync

* shorten the log prefix to TYB (3 chars).

requested by arendst

* use the local definition for the SET_DP command.

reaching back to the existing tuyamcu code isnt reliable.

pointed out by arendst

* put the todo list in the code so it can be tracked

* check the wifi/mqtt state every second and update the mcu if it changes.

* fix rule processing when Dp state is changed from a cmnd.

rule processing was done as part of publishing the state, but publishing
the state when it was updated by a command only happened if So59 was
set. split rule processing out of publish and call them separately as
needed.

publish is now called from teleperiod, status updates from the MCU,
and from cmnds if so59 is set. rules are called from status updates from
the MCU and from cmnds.

Co-authored-by: David Gwynne <dlg@defeat.lan.animata.net>
 2023-01-08 17:35:45 +01:00
Theo Arends 2e7496a052 Keep webserver enabled on command ``upload`` 2023-01-07 15:37:52 +01:00
Theo Arends 404589c860 Enable USE_WE517 in tasmota32.bin 2023-01-02 11:38:08 +01:00
Theo Arends c63919d783 Change Energy totals max supported value 
- Change Energy totals max supported value from +/-21474.83647 to +/-2147483.647 kWh
- Bump version to v12.3.1.3
 2023-01-01 11:32:30 +01:00
Theo Arends 20a50ffc2e Revert Tuya rewrite 
- Update changelogs
 2022-12-31 16:08:59 +01:00
Theo Arends 3555d88bee Bump version v12.3.1.2 
- Fix shutter default motorstop set to 0 (#17403)
 2022-12-21 15:20:33 +01:00
Jason2866 1b3eedd635
reduce memory footprint for MI32 builds (#17426) 
by disabling (default) Ethernet support
 2022-12-17 19:28:25 +01:00
s-hadinger 9abe7b1af9
Support for IPv6 DNS records (AAAA) and IPv6 ``Ping`` for ESP32 and ESP8266 (#17417) 2022-12-17 10:08:35 +01:00
Theo Arends 4e5c1f7a2d Bump version to v12.3.1.1 2022-12-16 10:20:51 +01:00
Theo Arends 571502114c Bump version v12.3.0.1 2022-12-14 14:46:08 +01:00
Theo Arends 1ad8b7713e Add support for ME007-ULS 
Add support for ME007-ULS narrow FoV ultrasonic distance sensor by Mathias Buder (#17376)
 2022-12-14 12:18:49 +01:00
Mathias fc8039d960
Adding support for ME007-ULS narrow FoV ultrasonic distance sensor (#17376) 
* Squashed commit of the following:

commit 1441459a47cff0a43aa61ce47510585ee03649f3
Merge: a9fcbd342 7e27945e5
Author: Mathias Buder <mathias_buder@bose.com>
Date:   Tue Dec 13 09:00:06 2022 +0100

    Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor

commit a9fcbd3428445eb914816f608e064568d16b41e9
Merge: 7bb1049f5 d83119897
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Mon Dec 12 10:33:06 2022 +0100

    Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor

commit 7bb1049f51da8d064462b9499ed479a7675b368e
Merge: 83a5afa7a eee86f01a
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Fri Dec 9 09:30:29 2022 +0100

    Merge remote-tracking branch 'github/development' into me007-narrow-fov-ultrasonic-sensor

commit 83a5afa7ad27fcde1e67008e41a9bfd9c680cccd
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Thu Dec 8 14:47:13 2022 +0100

    [ME007] Added driver version number to MQTT message, small delay between consecutive measurement

commit 9b8667843154f02a23020e655d806ed76ae2e530
Merge: 39180f345 de408921e
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Thu Dec 8 10:12:45 2022 +0100

    Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor

commit 39180f3451fce5f06504195faea0124d73dac1ee
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Wed Dec 7 16:41:26 2022 +0100

    [ME007] Added median filter

commit 01b68e0e6ca147ac03b63b8c71d035563e3bf13b
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Mon Dec 5 23:08:57 2022 +0100

    [ME007] Simplified state maschine within me007_measure()

commit 1c74c6ed3e4097f09792a48420b2016c92e10353
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Mon Dec 5 22:21:16 2022 +0100

    [ME007] Fixed issues from previous pull-request

commit 25b667120fd8d70fcfed36de44f1b7a17d0686be
Merge: 01e0b1809 e7d40b8d1
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Mon Dec 5 10:46:25 2022 +0100

    Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor

    # Conflicts:
    #	tasmota/include/tasmota_template.h

commit 01e0b18096bfffc67673e25152114694caaf110a
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Sun Dec 4 20:53:39 2022 +0100

    [ME007] Minor changes

commit ec00c9b85d223b78586c464bb92d1c7894357a40
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Fri Dec 2 13:08:06 2022 +0100

    [ME007] Added some measurement error statistics

commit c5cf65f82c42195752a88fd1553c74ab68c39cb2
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Thu Dec 1 22:38:07 2022 +0100

    [ME007] Fixed MQTT message

commit ae07d8dd77db47e20578f655ec057a63b30e65ce
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Thu Dec 1 21:56:20 2022 +0100

    [ME007] Minor code refactoring

commit d2b43ca70c716e1b637b9efd3b536506233e5365
Merge: 292f5f6c8 816fd78fb
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Thu Dec 1 16:48:38 2022 +0100

    Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor

commit 292f5f6c81f1659eb225271cdd025eb77da02c6f
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Thu Dec 1 16:47:03 2022 +0100

    [ME007] Added logic to detect sensor at boot and during runtime

commit f17af404fee76bf63b30ed3c9d2175c4e01c03ca
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Thu Dec 1 12:32:19 2022 +0100

    [ME007] Added missing define into language files

commit 7a271abeca36139a43ef96bd461d46ba0c662901
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Thu Dec 1 12:19:23 2022 +0100

    [ME007] Improved snesor measuremnt function

commit fe42ebd1124e2246e4d7afd63c905c251e084b27
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Thu Dec 1 00:43:13 2022 +0100

    [ME007] Updated state maschine to trigger and receive sensor measurements

commit d137e6dec5104b4716428849d99c68bbf407ab42
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Wed Nov 30 20:35:31 2022 +0100

    [ME007] Added initial state maschine to trigger and receive sensor measurements

commit fc3da7b36849df162d9d5496a763ab2beb096aff
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Tue Nov 29 21:28:28 2022 +0100

    [ME007] Updated pin name

commit e9fa9fb771cf15dcd9ed8b63b9194154543ef10e
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Mon Nov 28 22:02:34 2022 +0100

    [ME007] Fixed issue that sensor GPIOs not shown in drop-down list

commit a13e42660183eb4ab91007ca0ea6bf1544687556
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Mon Nov 28 15:06:34 2022 +0100

    [ME007] Added sensor into supported feature list

commit dec17b59ce2905124386f8c90d81656bf104c844
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Mon Nov 28 15:01:58 2022 +0100

    [ME007] Removed log message in Xsns23()

commit 11f479d2ec9d3f4e7552c2f78cdc83914c5b8b94
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Mon Nov 28 10:47:55 2022 +0100

    [ME007] Added GPIOs to tasmota_template_legacy.h and berry

commit 23aec8e5ff4e9fb8ef7d3b01a707641accc1e01e
Author: Mathias Buder <mathias.buder@gmail.com>
Date:   Sun Nov 27 20:10:53 2022 +0100

    [ME007] Initial ME007 driver API setup

* [ME007] Reverted change in .gitignore and platform.ini

* [ME007] Removed dependency to stdlib.h

* [ME007] Adjusted unit to cm

* [ME007] Reverted change in tasmota_template_legacy.h

* [ME007] Changed sensor message tag to three characters

* [ME007] Disabled sensor in my_user_config.h

* [ME007] Added driver code size into commente

Co-authored-by: Mathias Buder <mathias_buder@bose.com>
 2022-12-14 11:52:26 +01:00
Jason2866 c0b695432a
enable `ETHERNET` in more esp32 env (#17391) 2022-12-14 11:26:09 +01:00
stefanbode 2902c93b29
functionality upgrade (#17380) 
* functionality update see below:

- added shutterxxx0 command to change all shutters in parallel. Similar to power0 command
- added flexible ShutterMotorstop time to control the time between one relay OFF and the next ON. Now not blocking anymore other operations
- fix recent bug "shuttermode x" not working anymore
- changed autoconfig behavior to avoid SHORT CIRCUIT on missing interlock setting or wrong shuttermode

* Adding motorstop time for shutters

* Adding motorstop command for shutters

* func update

- added shutterxxx0 command to change all shutters in parallel. Similar to power0 command
- added flexible ShutterMotorstop time to control the time between one relay OFF and the next ON. Now not blocking anymore other operations
- fix recent bug "shuttermode x" not working anymore
- changed autoconfig behavior to avoid SHORT CIRCUIT on missing interlock setting or wrong shuttermode

* typo fix

* regression fix on "shutterposition stopclose"

* fix mulithread timing issue
 2022-12-14 11:25:41 +01:00
Stephan Hadinger 2f1b2ec5fd IPv6 support for Ethernet (ESP32) 2022-12-08 19:06:51 +01:00
Theo Arends bbde894628 Add serial Modbus transmit enable GPIOs 
Add serial Modbus transmit enable GPIOs to all modbus energy drivers and modbus bridge (#17247)
 2022-12-03 12:33:42 +01:00
Stephan Hadinger d3be3dfe8f IPv6 preview for ESP32, also working for ESP8266 2022-11-30 19:40:58 +01:00
Theo Arends af9f83e7e4 Bump version v12.2.0.6 2022-11-29 11:11:39 +01:00
Theo Arends 21290de9c4 Prep HLK-LD2410 2022-11-21 14:07:25 +01:00
Theo Arends 4f31e7a1b2 Add command ``SetOption35 0..255`` 
Add command ``SetOption35 0..255`` to skip number of received messages in Serial Bridge (default 0) (#17140)
 2022-11-20 12:52:24 +01:00
Theo Arends 425f83bf85 Update Serial Bridge code size 2022-11-19 14:59:36 +01:00
Theo Arends 215db46966
Merge pull request #17136 from Staars/mi_disco 
MI32 legacy: hide BLE sensors from discovery to do this in Berry
 2022-11-19 10:05:53 +01:00
Christian Baars 7129c64048 hide sensors from discovery to do this in Berry 2022-11-18 20:46:42 +01:00
Theo Arends 0674f9b0b6 Add command ``SSerialBuffer 64..256`` 
Add command ``SSerialBuffer 64..256`` to change software serial bridge receive buffer size from default (64) to max local buffer size (256) (#17120)
 2022-11-18 13:00:59 +01:00
Theo Arends a924e41ff3 Bump version v12.2.0.5 
- Fixed ModbusBridge baudrates over 76500 baud (#17106)
- Bump version v12.2.0.5
 2022-11-17 11:44:51 +01:00
Stephan Hadinger 5f0b92568e Add ArtNet to Tasmota32 precompiled 2022-11-16 18:41:07 +01:00
Theo Arends f044ccdeec Remove commands ArtNetStop and ArtNetStart 2022-11-16 16:26:12 +01:00
Theo Arends a0e7191d4e Add command ArtNet 
- Fix ArtNetStop
 2022-11-16 16:15:31 +01:00
Stephan Hadinger 0b18c60ba2 Zigbee ZbProbe for unknown devices and doc helper 2022-11-16 13:43:36 +01:00
Theo Arends 5f3d504c30 Add support for HMC5883L 
Add support for HMC5883L 3-Axis Digital Compass sensor by Andreas Achtzehn (#17069)
 2022-11-15 11:11:32 +01:00
Theo Arends e88d1682e9 Add command ``SwitchMode 16`` 
Add command ``SwitchMode 16`` sending only MQTT message on inverted switch change (#17028)
 2022-11-15 10:10:29 +01:00
Stephan Hadinger 2549203c13 Added WS2812 and Light ArtNet DMX control over UDP port 6454 2022-11-13 18:22:39 +01:00
Stephan Hadinger 3731894486 Added ``FUNC_NETWORK_UP`` and ``FUNC_NETWORK_DOWN`` events 2022-11-11 11:15:05 +01:00
Theo Arends 6f00b455e7 Add serial receive poll during sleep 
Add serial receive poll during sleep for tuya and serial bridge
 2022-11-11 09:57:00 +01:00
Theo Arends 41e44d0f9f
Merge pull request #16971 from thomashargrove/pmsx003t 
Add support for Plantower PMSx003T AQI models with temperature and humidity
 2022-11-10 09:42:28 +01:00
Theo Arends 7c6962cfef
Merge pull request #17032 from barbudor/dingtian_driver 
Dingtian relay board driver
 2022-11-10 09:18:22 +01:00
Theo Arends dd1586fbfc Bump version to v12.2.0.4 
- Reverted Flash Mode back from ``DIO`` to ``DOUT`` for ESP8266/ESP8285 (#17019)
 2022-11-09 12:19:33 +01:00
Theo Arends 381bfbf5bd Redesign distance sensors VL53LXX, TOF10120, HRXL and DYP 
Redesign distance sensors VL53LXX, TOF10120, HRXL and DYP to use cm instead of mm (#17021)
 2022-11-08 16:59:46 +01:00
Theo Arends 64ed79debc Make distance floats with one decimal (#17021) 2022-11-08 16:16:15 +01:00
Barbudor b03476ff6f Merge branch 'development' into dingtian_driver 2022-11-07 22:33:35 +01:00
Theo Arends a469b35f02 Bump version to v12.2.0.3 2022-11-07 11:06:17 +01:00
Cossid 0e32763a4e BP1658CJ - Add support for BP1658CJ RGBCW led driver control as used in Orein OS0100411267 Bulb 2022-11-06 09:14:03 -06:00
Theo Arends 1caffb353c Add more SO47 info 2022-11-03 17:50:47 +01:00
Theo Arends 4e9cfc7629 Add command ``SetOption47 1..255`` 
Add command ``SetOption47 1..255`` to delay power on relay state in seconds reducing power surge
 2022-11-03 17:26:54 +01:00
Thomas Hargrove 644f9da9af
Change define name to be more consistent with existing defines 2022-10-31 13:41:37 -07:00
Thomas Hargrove 0e5592fbff
Add support for PMSx003T modules that have temperature+humidity 2022-10-31 10:56:26 -07:00
Theo Arends 817819e603 Add PN532 persistent slots (#16939) 2022-10-31 13:38:26 +01:00
barbudor f861e8330a dingtian driver take 1 2022-10-29 21:38:22 +02:00
eeak 06350618b7 cleanup tasmota_template.h 2022-10-29 16:12:10 +03:00
eeak 4e98cbb387 moved D_CMND_xx to i18n.h 2022-10-29 16:09:09 +03:00
eeak 1bf69fd310 dali 2022-10-28 17:08:02 +03:00
Theo Arends cef18060a0 Bump version to v12.2.0.2 
Prepare for extended calibration and move some persistent data (PowerLow)
 2022-10-26 17:59:43 +02:00
Theo Arends d173b93758 Fix shelly pro button double press 2022-10-24 12:21:25 +02:00
Theo Arends b4269d262c Add support for Shelly Pro 1/2 
Add support for Shelly Pro 1/2 (#16773)
 2022-10-24 11:32:10 +02:00
Theo Arends e347665148 Add 2 CSs 2022-10-21 15:10:21 +02:00
Theo Arends 47456a54ee Prep ADE7953 using SPI 2022-10-21 15:06:52 +02:00
Theo Arends 549e6d9c18 Add USE_SHIFT595 to tasmota32.bin 2022-10-21 13:40:01 +02:00
Theo Arends 2104256b74 Add DS18x20 support on up to four GPIOs 
Add DS18x20 support on up to four GPIOs by md5sum-as (#16833)
 2022-10-18 16:36:45 +02:00
Theo Arends df24aef75c
Merge pull request #16833 from md5sum-as/development 
Adding support multiple GPIO for DS18x20 sensors. Aliases of DS18x20 optimization.
 2022-10-18 15:40:32 +02:00
Theo Arends 065396ff73 Bump version v12.2.0.1 2022-10-17 11:25:22 +02:00
md5sum-as d4f3bc732b ESP32 don't support dual pin mode 2022-10-15 18:57:29 +03:00
Jason2866 e1af7ba12a `USE_LIGHT` needed for flashlight 2022-10-15 16:26:02 +02:00
md5sum-as 1cdbb980f1 Add support DS18x20_MULTI_GPIOs for esp8266 2022-10-14 23:58:53 +03:00
Jason2866 8d59dd800f
rm Domoticz / ad Counter 2022-10-14 15:32:57 +02:00
Theo Arends 2ad018816b Add command ``WcClock 10..200`` 
Add command ``WcClock 10..200`` set webcam clock in MHz. Default is 20
 2022-10-13 17:58:16 +02:00
Theo Arends 5cfbbd4302 Add command ``Sunrise 0..3`` to select sunrise dawn angle 
- Bump version to v12.1.1.5
- Add command ``Sunrise 0..3`` to select sunrise dawn angle between Normal, Civil, Nautical or Astronomical (#16795)
 2022-10-12 11:02:54 +02:00
Theo Arends 3c7a5ebfd3 Fix possible buffer overflows with exception 2022-10-11 11:10:47 +02:00
Theo Arends 98ae77037d Merge branch 'development' of https://github.com/arendst/Tasmota into development 2022-10-09 17:59:30 +02:00
Theo Arends 2d15697de4 Increase serial console fixed input buffer size from 520 to 800 2022-10-09 17:59:27 +02:00
Jason2866 3b597a9a50
Merge pull request #16761 from Staars/MI32 
Mi32 legacy: remove some legacy code
 2022-10-08 23:24:45 +02:00
Christian Baars 08ae94ff5b cleanups and handle unknown sensors 2022-10-07 16:10:19 +02:00
Theo Arends 0265cab7dc Prep generic energy modbus interface 2022-10-06 19:22:46 +02:00
Theo Arends 29a9197101
Merge pull request #16714 from Performance20/development 
Add QMC5883L driver
 2022-10-05 14:17:43 +02:00
Helge 31c94424a9 Json name adaption + test config 2022-10-04 17:39:06 +02:00
Helge 5998fe856a added code recommendations 
and reduce functionality to the most necessary
 2022-10-04 15:48:27 +02:00
Theo Arends 7152d012d9 Fix Shelly Plus 2PM negative values 2022-10-04 09:37:29 +02:00
Theo Arends 8eb7b007d5 Support for Shelly Plus 2PM 
- Version bump to v12.1.1.4
- Support for Shelly Plus 2PM using template ``{"NAME":"Shelly Plus 2PM PCB v0.1.9","GPIO":[320,0,0,0,32,192,0,0,225,224,0,0,0,0,193,0,0,0,0,0,0,608,640,3457,0,0,0,0,0,9472,0,4736,0,0,0,0],"FLAG":0,"BASE":1,"CMND":"AdcParam1 2,10000,10000,3350"}``
 2022-10-03 18:02:50 +02:00
Theo Arends a05f731a42 Fix Shelly Plus 2PM column swap 
- Fix Shelly Plus 2PM column swap
- Prep Shelly Plus 2PM ADE7953 reset pin
 2022-10-03 17:13:01 +02:00
Helge c15d974b44 add new driver to support qmc5883L 2022-10-02 21:41:51 +02:00
Stephan Hadinger b4aca5a3f3 Zigbee friendly names per endpoint 2022-10-02 20:54:49 +02:00
Theo Arends bda451ff91
Merge pull request #16649 from md5sum-as/development 
Add support alias for ds18x20 sensors.
 2022-09-29 14:32:16 +02:00
Theo Arends ec964d1c9e Add can bus sniffer 
Add can bus sniffer based on MCP2515 (#16684)
 2022-09-29 14:31:40 +02:00
Theo Arends f668ea44ed Add ESP32-S2 and ESP32-S3 touch input support 2022-09-27 15:36:35 +02:00
Theo Arends 3a4a82ba0a Fix ESP32 touch button multi-press and hold detection 
Fix ESP32 touch button multi-press and hold detection (#16596)
 2022-09-27 14:31:21 +02:00
Theo Arends 27caae90eb Fix Qualitel RGBWC bulb (#16626) 2022-09-26 21:51:29 +02:00
md5sum-as c5777fcb52 Add support alias for ds18x20 sensors 2022-09-25 14:45:35 +03:00
ortegafernando 0333e9e452
Add SetOption147 
SetOption147 (MQTT) Disable publish SSerialReceived MQTT messages. If disabled, you must use event trigger rules instead.

If it is activated, tasmota will not publish a MQTT message every time a SSerialReceived event fires. Use rules to control "what, how and when" publish these messages.
 2022-09-22 22:27:44 +02:00
ortegafernando cda2e2f80c
Add SetOption147 
SetOption147 (MQTT) Disable publish SSerialReceived MQTT messages. If disabled, you must use event trigger rules instead.

If it is activated, tasmota will not publish a MQTT message every time a SSerialReceived event fires. Use rules to control "what, how and when" publish these messages.
 2022-09-22 20:59:48 +02:00
ortegafernando d9e32d8b06
Setoption147 
Setoption147 (MQTT) Disable publish SSerialReceived MQTT messages. If disabled, you must use event trigger rules instead.

If it is activated, tasmota will not publish a MQTT message every time a SSerialReceived event fires. Use rules to control "what, how and when" publish these messages.
 2022-09-21 21:41:10 +02:00
ortegafernando cd2656b8ad
Setoption147 
Setoption147 (MQTT) Disable publish SSerialReceived MQTT messages. If disabled, you must use event trigger rules instead.

If it is activated, tasmota will not publish a MQTT message every time a SSerialReceived event fires. Use rules to control "what, how and when" publish these messages.
 2022-09-21 21:39:45 +02:00
ortegafernando a6d4fe1e46
Add SetOption157 
Add SetOption147  (MQTT) Enable publish SSerialReceived MQTT messages. If disabled, use event rules instead.
If it is disabled, tasmota will not publish an MQTT message every time a SSerialReceived event fires. Use rules to control how and when publish these messages.
 2022-09-21 09:27:19 +02:00
ortegafernando 3cb2c7c497
Add SetOption147 
Add SetOption147  (MQTT) Enable publish SSerialReceived MQTT messages. If disabled, use event rules instead.
If it is disabled, tasmota will not publish an MQTT message every time a SSerialReceived event fires. Use rules to control how and when publish these messages.
 2022-09-20 23:12:54 +02:00
Stephan Hadinger dff9274cb6 Zigbee basic support for Green Power 2022-09-19 22:28:38 +02:00
Theo Arends 971b06ccdd Add command ``SetOption46 0..255`` 
Add command ``SetOption46 0..255`` to add 0..255 * 10 milliseconds power on delay before initializing I/O (#15438)
 2022-09-15 17:17:16 +02:00
Theo Arends 6aece15bd6 ESP32 Increase number of button GPIOs from 8 to 28 
ESP32 Increase number of button GPIOs from 8 to 28 (#16518)
 2022-09-14 16:33:01 +02:00
Theo Arends ae1d4ef1f7 Bump version to v12.1.1.2 2022-09-10 16:32:57 +02:00
Jason2866 30c9f985cf
Enable Ethernet for solo1 2022-09-08 21:01:27 +02:00
Theo Arends 5062911579 Re-enable USE_LIGHT 2022-09-06 17:20:11 +02:00
Theo Arends 8c064c9749 Shrink tasmota-lite.bin 2022-09-06 17:08:26 +02:00
Theo Arends a43eaef01b Add influxdb support to zigbee (#16417) 2022-09-02 15:26:44 +02:00
Theo Arends 86e45969bd Support for DFRobot SEN0390 V30B ambient light sensor 
Add support for DFRobot SEN0390 V30B ambient light sensor (#16105)
 2022-09-02 13:13:47 +02:00
Theo Arends 684584a5e5 Command ``SetOption146 1`` to enable display of ESP32 internal temperature 2022-09-02 11:24:47 +02:00
Stephan Hadinger 3791ecd2a0 Support for Ethernet in ESP32 safeboot firmware 2022-08-30 18:46:22 +02:00
barbudor eb96127efd allow SerialBuffer up to 2048 2022-08-28 16:49:52 +02:00
Theo Arends c7e6aabf2c
Merge pull request #16341 from FunJp/support_for_sgp40 
Add support for SGP40 sensor
 2022-08-26 19:22:04 +02:00
Theo Arends 91875f20a5 Add balanced energy values 
Add balanced energy values (#16346)
 2022-08-26 14:35:52 +02:00
Jean-Pierre Deschamps 214f4bbdfd Add support for SGP40 sensor 2022-08-25 15:51:51 -04:00
Theo Arends 58f14301ae Bump version v12.1.1.1 2022-08-25 14:08:05 +02:00
Theo Arends 103808ce44 Add command ``StatusRetain`` 
Add command ``StatusRetain`` (#11109)
 2022-08-19 14:24:55 +02:00
Stephan Hadinger ff07d0608b Zigbee device plugin mechanism with commands ``ZbLoad``, ``ZbUnload`` and ``ZbLoadDump`` 2022-08-18 19:23:11 +02:00
Theo Arends 94c88df93b Fix RTC not detected when lights are present 
Fix RTC not detected when lights are present (#16242)
 2022-08-18 15:41:35 +02:00
Theo Arends 9285f89ef7 Bump version v12.1.0.1 2022-08-18 14:39:55 +02:00
blakadder 2716d739f2 Add PM 2.5 sensor to TuyaMCU driver 2022-08-15 00:58:45 +02:00
Theo Arends 2cdfcf5345 Update changelog and templates 2022-08-11 14:47:31 +02:00
Stephan Hadinger 2a087f40f9 Zigbee ``SetOption144 1`` includes a timestamp in `ZbReceived` messages 2022-08-09 18:30:01 +02:00
Theo Arends fc86a63417 Fix wifiscan encryption types 
Fix wifiscan encryption types (#16141)
 2022-08-07 15:52:23 +02:00
Stephan Hadinger f18091c53b Zigbee include "BatteryPercentage" in all messages 2022-08-06 14:27:58 +02:00
Theo Arends ebf0ad503c
Merge pull request #16141 from ascillato/Add_WifiScan_and_WifiTest_cmnds 
Add `WifiScan` and `WifiTest` commands
 2022-08-06 09:35:21 +02:00
Theo Arends 02d7eb1d7d Fix energy values after power cycle 
Fix energy values after power cycle (#16118)
 2022-08-05 15:25:39 +02:00
Stephan Hadinger d482f49002 Zigbee add Battery auto-probe (can be disabled with ``SetOption143 1``) 2022-08-04 11:15:53 +02:00
Adrian Scillato de84f6781f
Add new commands definitions (WifiScan, WifiTest) 2022-08-02 22:28:59 -07:00
Adrian Scillato 02aa432384
Move Wifi Struct definition to a header file 
Move Wifi Struct definition to a header file in order to be accessible from functions outside support_wifi.ino file
 2022-08-02 22:25:20 -07:00
Stephan Hadinger 9f29e7c40d Support for multiple `IRsend` GPIOs 2022-08-02 22:52:35 +02:00
JeroenSt 7e02b61e46 Baudrate and serial config for modbus_bridge are now persistent 2022-07-25 19:18:30 +02:00
Theo Arends 722406a461 Add support for Modbus bridge 
Add support for Modbus bridge adding commands ``ModbusSend``, ``ModbusBaudrate`` and ``ModbusSerialConfig`` (#16013)
 2022-07-20 10:41:02 +02:00
JeroenSt 1cc091e4fa Added ModbusBridge 2022-07-19 14:10:12 +02:00
Theo Arends 846b217427 Bump version to v12.0.2.4 
- Bump version to v12.0.2.4
- Command ``SetOption45 1..250`` to change default bistable latching relay pulse length of 40 milliseconds (#15856)
 2022-07-16 14:32:18 +02:00
Theo Arends 43371ce196 Extract USE_I2S from not used USE_I2S_AUDIO gpios 2022-07-11 15:54:47 +02:00
Theo Arends cc9c6299ca Consolidate I2S GPIOs 2022-07-11 15:49:57 +02:00
gemu2015 11c72a985f i2s audio pins 2022-07-11 09:18:27 +02:00
Theo Arends 8283cee823 Fix bistable relay support 2022-07-10 12:07:58 +02:00
Theo Arends 485328b94d Update sonoff POWR320D template 
Update sonoff POWR320D template with bistable relay
 2022-07-10 11:38:06 +02:00
Theo Arends c9d289822c Fix bistable relays and SO63 2022-07-09 16:26:13 +02:00
Theo Arends cd0f9c7360 Revert "Revert "Add better support for bistable (latching) relays"" 
This reverts commit c6867ddd3d.
 2022-07-09 15:55:27 +02:00
Theo Arends c6867ddd3d Revert "Add better support for bistable (latching) relays" 
This reverts commit 6031e5df98.
 2022-07-09 14:47:36 +02:00
Theo Arends 6031e5df98 Add better support for bistable (latching) relays 
Add support for bistable (latching) relays mixed with monostable relays using GPIO Relay_b or Relay_bi
 2022-07-09 12:27:59 +02:00
Theo Arends e6b4a77abd Add ESP32 Sonoff sensor support 
- Bump version to v12.0.2.3
- Add ESP32 SI7021, THS01 and MS01 support
- Fix THRxxD template
 2022-07-06 16:58:27 +02:00
Theo Arends 53d2c76cec Prep TM1621 support 2022-07-04 10:46:35 +02:00
Theo Arends d956db1f7c Fix USE_FLOWRATEMETER 
Fix USE_FLOWRATEMETER (#15909)
 2022-07-02 12:43:47 +02:00
Theo Arends 494e0ec552
Merge pull request #15846 from trlafleur/X14mods 
Updated MP3 Driver with busy and MP3 Folder command
 2022-06-25 15:20:35 +02:00