Commit Graph

126 Commits

Author SHA1 Message Date
Theo Arends dcbb3f1e0e Happy New Year 2021-01-01 13:44:04 +01:00
Theo Arends f004cfea60 Breaking change regarding MFRC522 and ILI9341
- Replaced MFRC522 13.56MHz rfid card reader GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_RC522_CS``
- Replaced ILI9341 GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_ILI9341_CS`` and ``GPIO_SPI_DC`` by ``GPIO_ILI9341_DC``
2020-12-29 17:42:53 +01:00
Theo Arends eaa9da7d11 Bump version to v9.2.0.1 2020-12-17 14:03:02 +01:00
Theo Arends e1963e98dc Breaking change KNX DPT9 to DPT14
- Version bump to 9.1.0.2
- Breaking change KNX DPT9 (16-bit float) to DPT14 (32-bit float) by Adrian Scillato (#9811, #9888)
2020-11-17 10:36:57 +01:00
Theo Arends cc69244a8f Changed platformio compiler option
Changed platformio compiler option `no target align` enabled for stage
2020-11-05 13:55:17 +01:00
Theo Arends cdf66b6eff Version bump 2020-11-05 13:33:17 +01:00
Theo Arends a96218fc1c v9.0.0.3
- Add TLS in binary tasmota-zbbridge (#9620)
- Add support for EZO CO2 sensors by Christopher Tremblay (#9619)
2020-10-25 14:46:13 +01:00
Theo Arends fc04c50674 Convert AdcParam parameters from versions before v9.0.0.2
- Command ``Gpio17`` replaces command ``Adc``
- Command ``Gpios`` replaces command ``Adcs``
2020-10-11 11:31:46 +02:00
Theo Arends dd95b4a8cd Bump dev version to 9.0.0.1 2020-10-02 12:22:01 +02:00
Theo Arends 5176e3ab02 Bump version to 8.5.0.1 2020-09-07 14:54:31 +02:00
Theo Arends 0f1e4fc917 Add command ``PowerDelta1`` to ``PowerDelta3``
- Bump version to 8.4.0.3
- Add command ``PowerDelta1`` to ``PowerDelta3`` to trigger on up to three phases (#9134)
2020-08-23 18:29:16 +02:00
Theo Arends 731ca297b0 Add better config corruption recovery
- Add better config corruption recovery (#9046)
- Remove support for 1-step upgrade from versions before 6.6.0.11 to versions after 8.4.0.1
2020-08-13 13:04:28 +02:00
Theo Arends 70c7f38a1f Release 8.4.0 2020-07-29 16:58:07 +02:00
Theo Arends 6b0870343b Change to limited support of Arduino IDE
Change to limited support of Arduino IDE as an increasing amount of features cannot be compiled with Arduino IDE
2020-07-16 18:21:19 +02:00
Theo Arends 6f52b0f7cc Reset version 2020-07-15 14:35:30 +02:00
Theo Arends 642fa216c2 Merge branch 'development' into pre-release 2020-07-04 12:04:41 +02:00
Theo Arends 83bbe757db Add command ``Module2``
Add command ``Module2`` to configure fallback module on fast reboot (#8464)
2020-06-17 14:06:46 +02:00
Theo Arends 715697cb32 Add ESP32 ethernet commands
Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3`` (#8503)
2020-06-16 18:36:49 +02:00
Theo Arends ef0b797686 Add basic support for ESP32 ethernet
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503)
2020-06-15 18:27:04 +02:00
Theo Arends 4c5b2f37fd Add initial support for Telegram
Add initial support for Telegram bot (#8619)
2020-06-11 17:30:33 +02:00
Theo Arends 855e054db8 Change Energy JSON data
- Bump version 8.3.1.2
- Change Energy JSON Total field from ``"Total":[33.736,11.717,16.978]`` to ``"Total":33.736,"TotalTariff":[11.717,16.978]``
- Change Energy JSON ExportActive field from ``"ExportActive":[33.736,11.717,16.978]`` to ``"ExportActive":33.736,"ExportActiveTariff":[11.717,16.978]``
- Add Three Phase Export Active Energy to SDM630 driver
2020-05-22 17:48:21 +02:00
Theo Arends ebbdb28e48 Bump version to 8.3.1.1 2020-05-18 17:06:11 +02:00
Theo Arends 2055d06825 Merge branch 'development' into pre-release 2020-05-18 10:06:12 +02:00
Theo Arends d7f6c78ed9 Add command ``DeviceName``
Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI
2020-05-17 17:10:17 +02:00
Theo Arends fff26f6538 Fix button default state
- Fix button default state
- Bump version 8.3.0.1
2020-05-14 15:32:27 +02:00
Theo Arends 4e05975b6c Sync with released 8.3.0 2020-05-14 12:40:48 +02:00
Theo Arends 5d18ad1c74 Add experimental basic support for ESP32
- Add experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt
- Bump version to 8.2.0.6
- This ESP32 upgrade breaks current ESP32 templates
2020-05-01 17:30:09 +02:00
Theo Arends 14040f601c Breaking Change Device Groups multicast address and port
- Breaking Change Device Groups multicast address and port  (#8270)
- Version bump 8.2.0.5
2020-04-25 11:20:48 +02:00
Theo Arends d3b2f8c489 Add config version tag
- Add config version tag
- Bump version 8.2.0.4
2020-04-17 11:57:09 +02:00
Theo Arends d080bb97b8 Prep release 8.3.0 2020-04-09 11:58:35 +02:00
Theo Arends 4b98e9dfb2 Merge branch 'development' into pre-release 2020-04-05 14:33:47 +02:00
Theo Arends d713468c0c Add support for longer template names
Add support for longer template names
2020-03-29 17:41:31 +02:00
Theo Arends dbc9f16ffc Add support for up to four MQTT GroupTopics
- Bump version to 8.2.0.2
- Add support for up to four MQTT GroupTopics using the same optional Device Group names (#8014)
2020-03-28 16:48:36 +01:00
Theo Arends b6fc31ebb0 Bump version 8.2.0.1
- Bump version 8.2.0.1
- Change HM-10 sensor type detection and add features (#7962)
2020-03-21 15:46:28 +01:00
Theo Arends 211520b1c8 Bump version 8.2.0 2020-03-21 11:22:22 +01:00
Theo Arends c62a0318cd Bump version to 8.1.0.11
- Bump version to 8.1.0.11
- Add HAss Discovery support for Button and Switch triggers by Federico Leoni (#7901)
2020-03-13 12:00:52 +01:00
Theo Arends e3be05756a Merge branch 'development' into release 2020-03-06 12:18:08 +01:00
Theo Arends 5cfe247611 Change default my_user_config.h driver and sensor support
Change default my_user_config.h driver and sensor support removing most sensors and adding most drivers
2020-02-27 15:10:42 +01:00
Theo Arends 9b1fc4342b Revert wifi connectivity stability introduced in 8.1.0.5
Revert wifi connectivity stability introduced in 8.1.0.5 (#7746, #7602, #7621)
2020-02-20 11:24:35 +01:00
Theo Arends 8079ee9749 Change MQTT message size
Change MQTT message size with additional 200 characters
2020-02-12 18:00:53 +01:00
Theo Arends edadaa284f Bump version to 8.1.0.7 2020-02-10 15:20:38 +01:00
Theo Arends 186d3fcb4d Add support for Shelly Add-On adapter
Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter
2020-02-05 16:28:56 +01:00
Theo Arends ff01f934e2 Bump version 8.1.0.5 2020-01-26 14:20:40 +01:00
Theo Arends 0755ad488e Bump version to 8.1.0.4 2020-01-16 11:35:48 +01:00
Theo Arends 95fc96d563 Add support for gzipped binaries
Add support for gzipped binaries
2020-01-06 14:52:04 +01:00
Theo Arends 8aa9109656 Happy New Year
Happy New Year
2019-12-31 14:23:34 +01:00
Theo Arends a6cecfcb79 Add support for ADC0 Current Transformer
- Bump version to 8.1.0.2
- Add support for ``AdcParam`` parameters to control ADC0 Current Transformer Apparent Power formula by Jodi Dillon (#7100)
2019-12-30 16:42:53 +01:00
Theo Arends 15acf8487d Bump version to 8.1.0.1 2019-12-25 13:28:29 +01:00
Theo Arends 8cf7c6fbc2 Bump version to 8.0.0.3 2019-12-24 17:25:21 +01:00
Theo Arends a10b199808 Version bump to 8.0.0.2 2019-12-23 15:59:00 +01:00
Theo Arends c51c0dca57 Merge branch 'development' into release 2019-12-21 15:49:56 +01:00
Theo Arends f55e02e800 Bump version to 8.0.0.1
Change Settings text handling allowing variable length text within a total text pool of 699 characters
2019-12-21 15:37:36 +01:00
Theo Arends d2ebefbb16 Bump version to 7.2.0.1 2019-12-21 13:45:26 +01:00
Theo Arends 19dece24c5 Merge branch 'development' into release 2019-12-20 15:20:24 +01:00
Theo Arends 7459a8a424 Add restriction if fallback firmware is incompatible
Add restriction if fallback firmware is incompatible with settings resulting in unreachable device
2019-12-20 15:12:44 +01:00
Theo Arends 1b315134da Merge branch 'development' into release 2019-12-17 14:24:30 +01:00
Theo Arends 3d59de5d1d Bump version to 7.1.2.6
- Change some more Settings locations freeing up space for future single char allowing variable length text
- Add Zigbee support for Xiaomi Aqara Vibration Sensor and Presence Sensor by Stefan Hadinger
- Add Shutter functions ramp up/down and MQTT reporting by Stefan Bode
2019-12-14 13:16:55 +01:00
Theo Arends 21fa1fa04e Bump version to 7.1.2.5
Change some Settings locations freeing up space for future single char allowing variable length text
2019-12-13 12:05:07 +01:00
Shantur Rathore 6c3d029286 Implement capability for setting CORS to a specific website instead of just enable for all websites 2019-12-08 21:07:39 +00:00
Theo Arends c060089358 Bump version to 7.1.2.3
Redesign Exception reporting removing exception details from both MQTT info and Status 1. Now consolidated in Status 12 if available.
2019-12-08 13:37:18 +01:00
Theo Arends 00fd7f2f7c Bump version to 7.1.2.2
Add command ``SerialConfig 0..23`` or ``SerialConfig 8N1`` to select Serial Config (#7108)
2019-12-06 15:02:05 +01:00
Theo Arends 8c5c95747c Bump version 7.1.2.1 2019-12-06 12:18:46 +01:00
Theo Arends 597d43319f Maintenance Release 7.1.2 2019-12-06 11:18:00 +01:00
Theo Arends bea001968f Bump version 7.1.1.1 2019-12-01 13:38:24 +01:00
Theo Arends 9b62d1084d Bump version 7.1.1 2019-12-01 12:56:05 +01:00
Theo Arends 09f9104465 Bump version 7.1.0.1 2019-11-30 15:36:15 +01:00
Theo Arends 02e938fc18 Prep for release 7.1 2019-11-29 15:22:28 +01:00
Theo Arends 0d69b7fc98 Bump version to 7.0.0.6
Add colorpicker to WebUI by Christian Staars (#6984)
2019-11-22 13:09:59 +01:00
Theo Arends cc6f2f7896 Bump version 7.0.0.5 2019-11-18 11:21:48 +01:00
Theo Arends 0636113147 Revert "Version bump 7.0.0.5"
This reverts commit edcc17c41b.
2019-11-15 21:30:59 +01:00
Theo Arends edcc17c41b Version bump 7.0.0.5
Add one time flash sdk reset on initial execution solving possible SDK wifi releated issues
2019-11-15 18:10:46 +01:00
Theo Arends e099ebe7b6 Bump version to 7.0.0.4
Add command WifiPower 0 .. 20.5 to set Wifi Output Power which will be default set to 17dB
2019-11-08 13:00:32 +01:00
Theo Arends 1e29593469 Bump version 7.0.0.3
Initial support for I2C driver runtime control using command I2CDriver and document I2CDEVICES.md
2019-11-03 17:54:39 +01:00
Theo Arends 57e62b1e68 Bump version 7.0.0.2
Add command WebColor19 to control color of Module and Name (#6811)
2019-11-02 13:25:23 +01:00
Theo Arends 51a6aceaa8 Bump version 7.0.0.1
Remove references to versions before 6.x
2019-10-27 14:04:07 +01:00
Theo Arends 0e07397ff7 Change Sonoff-Tasmota to Tasmota 2019-10-27 12:04:08 +01:00