Commit Graph

450 Commits

Author SHA1 Message Date
arendst 83a9c0693a v5.9.1b - Add INA219 support
5.9.1b
 * Remove spaces in JSON messages
 * Add support for INA219
Voltage and Current sensor to be enabled in user_config.h
2017-11-11 12:33:30 +01:00
arendst 7098d058b1 v5.9.1a - Fix PWM Watchdog Timeout
5.9.1a
 * Fix PWM watchdog timeout if Dimmer is set to 100 or Color set
to 0xFF (#1146)
2017-11-08 11:57:16 +01:00
arendst 19533cc995 v5.9.0b - Fixes and add ADS1115 A/D converter
5.9.0b
 * Add support for ADS1115 to be enabled in user_config.h and
needs libraries i2cdevlib-Core and i2cdevlib-ADS1115 (#338, #660)
 * Fix
Exception 26 and empty console screen after usage of command
WakeupDuration (#1133)
 * Fix some changed iTead web links in README.md
(#1137)
2017-11-07 15:57:24 +01:00
arendst 68cdc6130c v5.9.0a - Add Sensor Service and Fix config download
5.9.0a
* Add external sensor function pointer interface to enable easy sensor
addition
* Fix Backup Configuration file download failure by defining proper file
size (#1115)
2017-11-03 18:07:25 +01:00
arendst ebe642c995 v5.8.0q Fixes and Shrinking code
5.8.0q
 * Shrink code by 4k using command lookup tables
 * Add retry
counter to DHT11/21/22 sensors (#1082)
 * Add commands RfSync, RfLow,
RfHigh, RfHost and RfCode to allow sending custom RF codes (#1001)
2017-10-29 18:18:46 +01:00
arendst ae12b958cd v5.8.0p - Prep for release
5.8.0p
 * Fix initial PwmFrequency and PwmRange
 * Add support for
Arilux AL-LC01 RGB Led controller (#370)
 * Add light turn Off Fade
(#925)
 * Change IrSend Panasonic command to IrSend
{"Protocol":"Panasonic", "Bits":16388, "Data":<Panasonic data>}
 *
where 16388 is 0x4004 hexadecimal (#1014)
2017-10-26 16:33:33 +02:00
arendst cf350dc584 v5.8.0o - Add VEML6070 and more light schemes
5.8.0o
 * Remove max string length of 14 for Domoticz sensor
descriptions
 * Add light scheme options (Color cycle Up, Down, Random)
and moving WS2812 schemes up by 3
 * Add support for VEML6070 I2C Ultra
Violet level sensor (#1053)
2017-10-25 14:27:30 +02:00
arendst 1296432da2 v5.8.0n - Add language, device and clock commands
5.8.0n
 * Fix minimum TelePeriod of 10 seconds set by web page
 * Shrink
information web page by 1k code space
 * Removed Arduino IDE version too
low warning as it interferes with platformio.ini platform =
espressif8266_stage
 * Add commands Color2, Color3, Color4, Width2,
Width3, Width4 and SetOption16 to set Ws2812 Clock parameters (#1019)
 *
Add Polish language file (#1044, #1047)
 * Add support for KMC 70011
Power Monitoring Smart Plug (#1045)
 * Corrected German language file
(#1054)
2017-10-23 12:18:15 +02:00
arendst fc89330056 v5.8.0m - Rewrite and Additions
5.8.0m
 * Rewrite code (partly) using Google C++ Style Guide
(https://google.github.io/styleguide/cppguide.html)
 * Allow empty
MqttHost name by using option 0
 * Allow Mqtt server mDNS lookup only
when MqttHost name is empty (#1026)
 * Change Ws2812 clock with more
flexible version (#1019)
 * Add German language file (#1022)
 * Support
connecting to MQTT brokers without userid and/or password (#1023)
 * Add
commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025)
2017-10-18 18:22:34 +02:00
arendst 66d9ff14ac v5.8.0l - Update module config webpage
5.8.0l
* Update HTML/CSS to enable nicer form field entry
* Fix inverted relay status after restart or power on as regression from
5.8.0d (#909)
* Add send protocol Panasonic to IRsend (#1014)
* Fix relay power control when light power control is also configured as
regression from 5.8.0 (#1016)
2017-10-14 11:26:49 +02:00
arendst 804bd8fb53 v5.8.0k - Add support for 8 relays
5.8.0k
 * Add support for up to 8 relays (#995)
 * Fix Blocked Loop when
erasing large flash using command reset 2 (#1002)
2017-10-12 11:29:40 +02:00
arendst ca431184e6 v5.8.0j - Fixes and Prep for more relays
5.8.0j
 * Set default altitude to 0 to be used with pressure sensors
 *
Document flash settings area for future use
 * Prepare for 32-bit power
control (#995)
 * Introduce sonoff.h master header
 * Fix TLS MQTT SSL
fingerprint test (#808, #970)
 * Fix pressure calculation for some BMP
versions regression introduced with version 5.8.0i (#974)
 * Fix
Domoticz Dimmer set to same level not powering on (#945)
2017-10-10 15:40:02 +02:00
arendst ff52288efe v5.8.0i - Some fixes and Add Sealevel Pressure
5.8.0i
 * Add Domoticz counter sensor to IrReceive representing Received
IR Protocol and Data
 * Fix Southern Hemisphere TIME_STD/TIME_DST
(#968)
 * Add Sea level pressure calculation (#974)
 * Fix virtual relay
status message used with Color/Dimmer control (#989)
 * Fix command
IRSend and IRHvac case sensitive parameter regression introduced with
version 5.8.0 (#993)
2017-10-08 16:51:05 +02:00
arendst 3bc7dd4e83 v5.8.0h - Add IR Receive
5.8.0h
 * Rename command IRRemote to IRSend (#956)
 * Add IR Receiver
support. Disable in user_config.h (#956)
 * Change default PWM
assignment for Witty Cloud to support optional Color/Dimmer control
(#976)
 *   GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2
 *   GPIO13
(Blue)  from GPIO_PWM5 to GPIO_PWM3
 *   GPIO15 (Red)   from GPIO_PWM3
to GPIO_PWM1
2017-10-06 17:28:00 +02:00
arendst 9e845f3c1e v5.8.0g - Fix some PWM issues
5.8.0g
 * Fix inverted PWM index (#960)
 * Fix some PWM related issues
(#967)
2017-10-05 13:28:31 +02:00
arendst c82fe7f46e v5.8.0f - Add inverted PWM support
5.8.0f
 * Set all saved power settings to Off when SetOption0
(SaveState) = 0 (#955)
 * Allow PWM initialization after restart (#955)

* Add support for inverted PWM (#960)
2017-10-04 17:29:49 +02:00
arendst 12af1af01b v5.8.0e - SnfBrdge RF code as Domoticz Counter
5.8.0e
 * Add Domoticz counter sensor to Sonoff Bridge representing
Received RF code (#943)
 * Add support for Luani HVIO board
(https://luani.de/projekte/esp8266-hvio/) (#953)
2017-10-02 16:45:03 +02:00
arendst 48faeaa2ce v5.8.0d - Add Color/Dimmer control to PWM
5.8.0d
 * Remove previous GPIO configuration when another module is
selected
 * Fix inverted relay power on state (#909)
 * Change default
PWM assignments for H801 RGB(CW) led controller to support optional
Color/Dimmer control
 *   GPIO04 (W2)    from GPIO_PWM2 to GPIO_USER to
be user configurable for GPIO_PWM5 (second White - Warm if W1 is Cold)

*   GPIO12 (Blue)  GPIO_PWM3 no change
 *   GPIO13 (Green) from
GPIO_PWM4 to GPIO_PWM2
 *   GPIO14 (W1)    from GPIO_PWM1 to GPIO_USER
to be user configurable for GPIO_PWM4 (first White - Cold or Warm)
 *
GPIO15 (Red)   from GPIO_PWM5 to GPIO_PWM1
 * Change default PWM
assignments for MagicHome RGB(W) led controller to support optional
Color/Dimmer control
 *   GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2
 *
GPIO12 (Blue)  from GPIO_PWM5 to GPIO_PWM3
 *   GPIO13 (White) GPIO_USER
to be user configurable for GPIO_PWM4 (White - Cold or Warm)
 *   GPIO14
(Red)   from GPIO_PWM3 to GPIO_PWM1
 * Add command SetOption15 0
(default) for command PWM control or SetOption15 1 for commands
Color/Dimmer control to PWM RGB(CW) leds (#941)
2017-10-01 14:32:36 +02:00
arendst 107b746083 v5.8.0c
5.8.0c
 * Add warning to webpage when USE_MINIMAL is selected (#929)
 *
Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (#930)
 *
Fix alignment of web page items in some browsers (#935)
 * Add smoother
movement of hour hand in WS2812 led clock (#936)
 * Add support for
Magic Home RGBW Led controller (#940)
2017-09-30 13:32:53 +02:00
arendst e974dcb7b7 v5.8.0b - Add Domoticz Voltage and Current
5.8.0b
 * Fix command FullTopic entry when using serial or console
interface
 * Fix possible UDP syslog blocking
 * Add debug information
to MQTT subscribe
 * Add Domoticz sensors for Voltage and Current (#903)
2017-09-26 15:10:58 +02:00
Theo Arends 33e116ccb9 v5.8.0a - Fix GPIOx JSON response
5.8.0a
 * Add translations to I2Cscan
 * Add translation to BH1750 unit
lx
 * Set default WS2812 pixel count to WS2812_LEDS
 * Fix command GPIOx
JSON response (#897)
2017-09-23 11:12:16 +02:00
arendst 9bad9e18c6 v5.7.1j - Fix On/Off for different language
5.7.1j
 * Remove the need for NeoPixelBus library for Hue support
 *
Reintroduce xdrv_ws2812 for flexible future library changes
 * Fix basic
On, Off, Toggle, Blink and BlinkOff commands when other language is
selected (#874)
2017-09-18 18:06:46 +02:00
arendst 87e89cda56 v5.7.1i - Add blink to WS2812 and Sonoff Leds
5.7.1i
* Add blink to WS2812 and Sonoff Led (#643)
2017-09-16 18:19:15 +02:00
arendst e232f22da2 v5.7.1h
5.7.1h
 * Consolidate WS2812 (xdrv_ws2812) into Sonoff Led
(xdrv_snfled)
 * Invert WS2812 fade speed to align with Sonoff led
(Speed 1 = fast, Speed 8 = slow)
 * Remove upper case MQTT receive
buffer
2017-09-16 17:34:03 +02:00
arendst e015b574e6 v5.7.1g - Add wificonfig option 5 (WIFI_WAIT)
5.7.1g
 * Add option WIFI_WAIT (5) to command WifiConfig to allow
connection retry to same AP without restart or update flash (#772, #869)
2017-09-16 14:19:47 +02:00
arendst cb0410a5dc v5.7.1f - Add dimmer parameter to Wakeup
5.7.1f
 * Reduce code and string length for output of commands Modules
and GPIOs
 * Add optional dimmer parameter to command Wakeup for
AiLight, Sonoff B1, Led and BN-SZ01 (#867)
2017-09-14 15:35:38 +02:00
arendst 2d5fc29976 v5.7.1e - Add Sonoff SC debugging
5.7.1e
 * Add Sonoff SC debug information
 * Change syslog service
2017-09-14 14:20:27 +02:00
arendst c16fd3d99e v5.7.1d
5.7.1d
 * Fix watchdog timeout caused by lack of stack space by now
using global buffers (#853)
 * Removed webserver syslog disable as now
no longer needed
 * Increased default MQTT message size from 368 to 405
bytes while keeping DMQTT_MAX_PACKET_SIZE = 512 (because we can)
 * Fix
MQTT Offline or Remove MQTT retained topic code
 * Allow command
SwitchTopic in group mode (#861)
 * Allow command SwitchMode if no
switches are defined (#861)
2017-09-13 14:19:34 +02:00
arendst 616b16d08d v5.7.1c - Extent port range
5.7.1c
 * Allow LogPort and MqttPort up to 65535 and add LogPort tot
Status 3 (#859)
2017-09-12 10:19:16 +02:00
arendst 105c5d7129 v5.7.1b - Add timeout to some sensors
5.7.1b
 * Add timeout to DHT and DS18B20 sensors (#852)
2017-09-10 17:20:03 +02:00
arendst 0151188652 v5.7.1a
5.7.1a
 * Fix Domoticz loop when Emulation is selected
 * Add GPIO14 to
Sonoff Dual (#797, #839)
 * Add support for Witty Cloud (#794)
 * Add
support for Yunshan Wifi Relay (#802)
 * Add GPIO16 input pulldown
(#827)
2017-09-10 15:51:44 +02:00
arendst 8585465967 v5.7.1
5.7.1 20170909
 * Remove leading spaces from MQTT data
 * Fix webconsole
special character entry
 * Allow # as prefix for color value
 * Fix
Alexa detection and Hue App Update Request (#698, #854)
2017-09-09 18:46:29 +02:00
arendst 53b0dad348 v5.7.0b - Add optional # to color value
5.7.0b
 * Add snfled UNDOCA
 * Allow # as prefix for color value for
ws2812 too
2017-09-08 17:14:39 +02:00
arendst 4f6acfa7d9 v5.7.0a - Add optional # to color
5.7.0a
 * Remove leading spaces from MQTT data
 * Fix webconsole special
character entry
 * Allow # as prefix for color value
2017-09-08 12:57:08 +02:00
Theo Arends 2bac7fa037 Add license information 2017-09-08 11:21:54 +02:00
Theo Arends 785239a1b8 Update README.md 2017-09-08 11:13:34 +02:00
Theo Arends b2c84a2758 Update README.md 2017-09-08 11:09:54 +02:00
Theo Arends fa83abf916 Add license info 2017-09-08 11:07:04 +02:00
Theo Arends f7bc1b6eee Update README.md 2017-09-07 19:03:43 +02:00
arendst 92ff7f0adc v5.7.0
5.7.0 20170907
* Shrink module configuration webpage
* Fix settings order during startup to allow for displaying debug
messages
* Fix some string length issues
* Add more string length tests by using strncpy
* Add Ai-Thinker RGBW led (AiLight)
* Add Power check and add PulseTime to power check at startup (#526)
* Add Supla Espablo support (#755)
* Add more precision to Sonoff Pow period and power results using
command WattRes 0|1 (#759)
* Add basic internationalization and localization (#763)
* Add more Sonoff Pow range checking (#772)
* Fix invalid JSON (#786, #822)
* Add duplicate check to received RF signal within 2 seconds for Sonoff
Bridge (#810)
2017-09-07 18:53:59 +02:00
arendst ee914714ab v5.6.1l - Tried to fix excepetion 3
5.6.1l
* Fix some string length issues
* Add more string length tests by using strncpy
* Tried to fix Exception 3 as I can't reproduce (#830)
2017-09-06 17:37:41 +02:00
arendst 95d54230fc v5.6.1k - Fix preprocessor language selection
5.6.1k
* Fix preprocessor language selection
2017-09-02 17:16:18 +02:00
arendst 1facc146cc Fix Linux compile error
5.6.1j
* Fix compile error on Linux due to language folder name
* Add basic internationalization and localization (#763)
* Fix invalid JSON (#822)
2017-09-02 15:06:57 +02:00
arendst 0fbbc23b2c Add I18n and fix invalid JSON
5.6.1i
* Add basic internationalization and localization (#763)
* Fix invalid JSON (#822)
2017-09-02 14:37:02 +02:00
arendst 740a0c6283 Add PulseTime to power check at startup
5.6.1h
* Add PulseTime to power check at startup (#526)
2017-08-30 11:08:18 +02:00
arendst 300bb8818f Fix Sonoff Bridge duplicates and check power at startup
5.6.1g
* Add power check at startup (#526)
* Add duplicate check to received RF signal within 2 seconds for Sonoff
Bridge (#810)
2017-08-29 16:35:45 +02:00
Theo Arends 9c3b1852b1 Revert HLW power changes
5.6.1f
* Fix JSON error (#786)
* Revert changes from 5.6.1e but extent HLW power timer to 10 seconds
(#796)
2017-08-27 10:00:11 +02:00
arendst 65681a7054 Remove HLW Power Timer (#759) 2017-08-24 15:09:39 +02:00
arendst 0de07df099 Fix possible Pow Exception 0 2017-08-24 11:09:52 +02:00
Theo Arends 0c59eb5585 Add more precision to Sonoff Pow period and power results using command WattRes 0|1 (#759) 2017-08-20 11:40:50 +02:00
arendst 3f365b6228 Add Supla Espablo support (#755) 2017-08-19 18:08:06 +02:00
arendst dbab55758a Shrink module configuration webpage 2017-08-19 16:29:51 +02:00
arendst d96191888d v5.6.1
5.6.1 20170818
* Change module list order in webpage
* Fix Sonoff T1 1CH and 2CH configuration (#751)
*
* 5.6.0 20170818
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Sonoff T1 support (#582)
* Add AnalogInput0 if configured as Analog Input to webpage (#697, #746)
* Add command SetOption14 0|1 to enable interlock mode (#719, #721)
* Fix Mitsubishi HVAC IR power controll (#740)
2017-08-18 18:04:49 +02:00
arendst fa0b7d7784 v5.6.0
5.6.0 20170818
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Sonoff T1 support (#582)
* Add AnalogInput0 if configured as Analog Input to webpage (#697, #746)
* Add command SetOption14 0|1 to enable interlock mode (#719, #721)
* Fix Mitsubishi HVAC IR power controll (#740)
2017-08-18 14:52:57 +02:00
arendst 06d0c62dfa Add global interlock
Use command SetOption14 1 to enable interlock mode
2017-08-18 12:55:08 +02:00
arendst e0f759a318 Invert Sonoff T1 led state 2017-08-18 10:40:21 +02:00
arendst 963476e688 v5.5.2i
5.5.2i
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support (saves 1k code
space)
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Fix Mitsubishi HVAC IR power controll (#740)
* Add Sonoff T1 support (#582)
2017-08-16 22:56:32 +02:00
arendst e9f4ca930a v5.5.2h - Add Sonoff B1 support
5.5.2h
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support (saves 1k code
space)
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Fix Mitsubishi HVAC IR power controll (#740)
2017-08-16 17:45:23 +02:00
arendst c0b1ceba8b v5.5.2
5.5.2 20170808
* Extent max number of WS2812 pixels from 256 to 512 (#667)
* Add OTA handling if server responds with no update available (#695)
* Removed undocumented command FlashMode (#696)
* Fix compile time error message due to increased message buffer size
(#703)
2017-08-08 16:31:43 +02:00
Theo Arends d28aaf0625 Revert "v5.5.1a" 2017-08-08 16:11:24 +02:00
Theo Arends 05073b7ab7 Revert "Ota remove flash mode" 2017-08-08 16:08:08 +02:00
Theo Arends c88080b2bd v5.5.1b
5.5.1b
 * Extent max number of WS2812 pixels from 256 to 512 (#667)
 * Add OTA handling if server responds with no update available (#695)
 * Removed undocumented command FlashMode (#696)
 * Fix compile time error message due to increased message buffer size (#703)
2017-08-08 14:45:19 +02:00
Theo Arends 24520bfcfa v5.5.1a
5.5.1a
* Extent max number of WS2812 pixels from 256 to 512 (#667)
2017-08-05 20:11:20 +02:00
arendst 934d6e3f15 v5.5.1
5.5.1 20170805
* Fix Sonoff Rf Bridge issues
* Add Sonoff RF Bridge MQTT messages on received and learned RF signal
* Add command VoltRes 0|1 to select voltage resolution to 0.1 V (#654)
* Add averaging to Analog input (#686)
* Add Energy tele data on Sonoff Pow Threshold change (#688)
* Fix inconsistent property names in Messages (#690)
2017-08-05 15:11:50 +02:00
arendst 0a9ec10b0a v5.5.0
5.5.0 20170730
* Reduce code space by removing the following commands as they are
replaced by SetOption alternatives:
*   SaveState = SetOption0
*   ButtonRestrict = SetOption1
*   Units = SetOption2
*   MQTT = SetOption3
*   MQTTResponse = SetOption4
*   TempUnit = SetOption8
* Smoothing WS2812 animation poll, invert fade speed and max allowed
wakeup time down to 3000 seconds
* Fix initial button press detection
* Add support for Sonoff RF Bridge 433 using command RfKey
* Fix regression from 5.0.7 by increasing message buffer size from 360
to 368 to accomodate 4 x DS18x20 sensors (#637)
* Add GroupTopic to Topic test when using ButtonTopic/SwitchTopic to
send either ON/OFF or TOGGLE (#642)
* Adjust HLW calibration limits to accomodate HuaFan device and add
commands HlwPSet, HlwUSet and HlwISet (#654)
2017-07-30 17:55:37 +02:00
arendst 22ef93a2c4 v5.4.0
5.4.0 20170725
* Fix command reset regression introduced in 5.2.0
* Increase polling from 0.1 second to 0.05 second
* Add multipress to all buttons
* Fix button 1 double press behaviour on multi relay devices
* Add support for Hua Fan Smart Socket (#479)
* Add support for Sonoff 4ch Pro (#565)
* Add command SetOption13 1 to allow immediate action on single button
press
*   (disables multipress, hold and unrestricted commands) (#587)
2017-07-25 18:05:47 +02:00
arendst 7e6b3a2bb1 v5.3.0
5.3.0 20170715
* Major Hue rewrite which might introduce Alexa problems. If so,
initiate an issue
* Add support for Sonoff Led and BN-SZ01 Ceiling Led brightness control
to Hue
* Fix Sonoff Led Power, Dimmer and Color MQTT response (#176)
* Add commands Delay and Backlog to allow multiple commands at once
separated by ";" (#593)
* Use default flashmode DOUT to solve restart hangs on esp8285 chips
(#453, #598)
* Change Web console column width from 99 to 300 (#599)
2017-07-15 15:07:30 +02:00
Theo Arends 3a4210e0e2 Update planned support 2017-07-03 18:06:55 +02:00
Theo Arends dd44bdb471 Updated planned support 2017-07-03 18:01:57 +02:00
arendst 39a65e230b v5.2.4
5.2.4 20170703
* Removed flash mode update after selecting different module solving
esp8285 related problems
* Add device type flag to sonoff_template.ino
* Change Sonoff Led Wakeup and add support for Sonoff BN-SZ01 Led
2017-07-03 11:45:15 +02:00
arendst ee883bdcb8 v5.2.3
5.2.3 20170630
* Change Sonoff Led color conversion code
* Fix SetOption12 handling
* Simplify auto configuration upgrade
* Add option Upgrade <version_number> to only upgrade to any higher
version (Old PR #213)
* Change FallbackTopic to cmnd/<MQTTClient>/<command> <parameter>
bypassing FullTopic and Prefix (#538)
2017-06-30 17:54:19 +02:00
arendst 2195ddd496 v5.2.2
5.2.2 20170625
* Add configuration SaveAddress to Status 1 and Information Page
* Change Sonoff Led Color conversion from AtoH to strtol
* Fix possible wrong uploads due to configuration overwrites (#542)
* Fix payload negative numbers (#547)
2017-06-25 23:01:41 +02:00
arendst 92958f4bdd v5.2.1
5.2.1 20170622
* Fix Restore Configuration in case of lower version
* Revert auto configuration upgrade allowing easy upgrade which was
removed in version 5.2.0
* Fix config auto upgrade from versions below version 4.1.1 (#530)
2017-06-22 22:00:09 +02:00
arendst b88ec7f5a9 v5.2.0
5.2.0 20170619
* Add command SetOption12 1 to disable newly released configuration
flash rotate to reduce flash wear
* Fix command CounterDebounce by removing test for active GPIO (#524)
* Add command SetOption33 1..250 to allow user configure POW
Max_Power_Retry count (#525)
2017-06-19 22:54:49 +02:00
arendst d763fd52eb v5.1.7
5.1.7 20170616
* Prep removal of SetOptions alternatives
* Restore webpage upgrade error messages removed in 5.1.5
* Add hold button functionality to buttons 2 to 4
* Add command SetOption32 1..100 to set Key Hold Time from 0.1 seconds
to 10 seconds (#200)
* Allow slashes in Topic, GroupTopic, ButtonTopic and SwitchTopic (#507)
* Changed webpage form actions from post to get and use relative path
url (#434, #522)
2017-06-16 14:33:49 +02:00
arendst 98d06e8809 v5.1.6
5.1.6 20170606
* Shrink code
* Removed online configuration of Domoticz In and Domoticz Out MQTT
strings
* Removed commands DomoticzInTopic and DomoticzOutTopic
* Add define KEY_HOLD_TIME to configure button hold threshold before
sending MQTT Hold message
* Add command StateText4 to configure button MQTT Hold text (=
MQTT_CMND_HOLD)
* Add command SetOption11 0|1 to swap pushbutton single and double press
functionality (#200)
* Add command SwitchMode<x> 5 (PUSHBUTTONHOLD) and 6
(PUSHBUTTONHOLD_INV) (#489)
2017-06-06 23:23:23 +02:00
arendst 0f103db4c6 v5.1.5
5.1.5 20170604
* Shrink code in preparation to ESP8266-Arduino 2.4.0-rc1
* Add effect parameter to HUE Device (#464)
2017-06-04 17:40:27 +02:00
arendst 44b69bfd97 v5.1.4
5.1.4 20170601
* Removed pre-compiled versions from repository as they are available
within the release
* Changed HUE Device type to color supporting version (#464)
* Fix compile error when BE_MINIMAL is selected (#467, #476)
* Add multiple compiled versions to release using updated Travis script
and platformio.ini (#467)
2017-06-01 17:37:30 +02:00
arendst 70ccdfe9b9 v5.1.3
5.1.3 20170520
* Add Domoticz Counter
2017-05-20 14:03:34 +02:00
arendst 26d3a8c191 v5.1.2
5.1.2 20170519
* Fix Counter/Timer JSON message and update Counter/Timer on webpage
* Fix WS2812 Domoticz related regression issues
2017-05-19 16:09:25 +02:00
arendst 88648a8099 v5.1.1
5.1.1 20170517
* Allow command FullTopic in group mode
* Prepare for more use of RTC memory
* Add independant WS2812 led string power control (#386, #390)
* Add command Counter<x> to control up to four GPIO falling edge
interrupt counters or timers (#459)
* Add command CounterType<x> to select between pulse counting or pulse
timing
* Add command CounterDebounce to select global counter debounce time in
mSec
2017-05-17 22:49:22 +02:00
arendst afc7b96b7c v5.1.0
5.1.0 20170513
* Fix Offline/Removal of retained topic when FullTopic is changed
* Add FullTopic to MQTT Configuration and Information web pages
* Add license model GPLv3 (#188)
2017-05-13 13:11:39 +02:00
arendst ec8b41903b v5.1.0
5.1.0 20170513
* Fix Offline/Removal of retained topic when FullTopic is changed
* Add FullTopic to MQTT Configuration and Information web pages
* Add license model GPLv3 (#188)
2017-05-13 13:09:54 +02:00
arendst 103c5606ac v5.0.7
5.0.7 20170511
* Fix possible exception 28 on empty command
* Add command SetOption0 as replacement for SaveState
* Add command SetOption1 as replacement for ButtonRestrict
* Add command SetOption2 as replacement for Units
* Add command SetOption4 as replacement for MqttResponse
* Add command SetOption8 as replacement for TempUnit
* Add command SetOption10 On|Off to select between Offline or Removing
previous retained topic (#417, #436)
2017-05-11 17:47:34 +02:00
arendst 32c3a66ead v5.0.6
5.0.6 20170510
* Remove hyphen in case of a single DHT sensor connecetd (#427)
* Add command MqttRetry <seconds> to change default MQTT reconnect retry
timer from minimal 10 seconds (#429)
2017-05-10 14:19:36 +02:00
arendst bc9d44d74a v5.0.5
5.0.5 20170508
* Add command FullTopic with tokens %topic% (replaced by command Topic
value) and
*  %prefix% (replaced by command Prefix<x> values) for more flexible
topic definitions (#244)
*  See wiki > MQTT Features
https://github.com/arendst/Sonoff-Tasmota/wiki/MQTT-Features for more
information
2017-05-08 13:21:45 +02:00
arendst 7ce5b4cba5 v5.0.4
5.0.4 20170505
* Add Sonoff Pow Energy Total up to 40 MWh
* Add command EnergyReset 1|2|3 to reset Energy counters (#406)
* Fix Domoticz Energy logging (#411)
* Add command PowerOnState 4 to keep relay always on and disabling all
power control (#418)
2017-05-05 17:57:05 +02:00
arendst 77da1dfdc1 v5.0.3
5.0.3 20170504
* Add command SensorRetain on|off to enable retaining of mqtt message
tele/sonoff/SENSOR (#74)
* Change WifiConfig timeout from 60 seconds to 180 seconds (#212)
* Change Sonoff Touch command Ledstate functionality by turning led on
if power is off (#214)
* Add 4 seconds delay after power on before enabling button to
workaround Wemos D1 mini RTS circuit (#380)
2017-05-04 13:58:26 +02:00
arendst c61a39a06d v5.0.2
5.0.2 20170503
* Reset SaveData, SaveState and MqttResponse to default values due to
rearranging settings
* Moved some settings flag area
* Add command TempUnit Celsius|Fahrenheit for selecting Celsius or
Fahrenheit (#347)
* Add command TempRes 0..3 for selecting Temperature Resolution (#347)
* Add command HumRes 0..3 for selecting Humidity Resolution (#347)
* Add command PressRes 0..3 for selecting Pressure Resolution (#347)
* Add command EnergyRes 0..5 for selecting Energy Resolution (#347)
* Add "TemperatureUnit":"C|F" to sensor JSON output (#347)
* Add support for up to three DHT type sensors each using a different
GPIO (#339, #404)
2017-05-03 18:19:13 +02:00
arendst 1dcde6aac4 v5.0.1
5.0.1 20170429
* Adjust Sonoff SC messages to prepare for display feature
* Move static data from RAM to Flash
* Fix PowerOnState for some devices not reporting "Power on" state
(#284, #380, #383)
2017-04-29 14:40:53 +02:00
arendst 9b69cead60 Updated with link to Wiki > Prerequisite 2017-04-27 17:17:01 +02:00
arendst ecc6bb5fdc v5.0.0
5.0.0 20170425
* Memory status message update
* Fix setting migration to better preserve settings during move (#382)
* Best practice is first doing a Backup Configuration before installing
version 5.0.0
* Reset save count after setting move
* Start using new linker script without SPIFFS
2017-04-25 18:24:42 +02:00
arendst 8dd291b5c7 v4.2.0
4.2.0 20170424
* Prepare for SPIFFS removal by moving settings to EEPROM area
* Fix compilation error when webserver is disabled (#378)
2017-04-24 18:25:53 +02:00
arendst 824368125b v4.1.3
4.1.3 20170410
* Add user configuarble GPIO to module S20 Socket and Slampher
* Add support for Sonoff SC (#112)
* Set PWM frequency from 1000Hz to 910Hz as used on iTead Sonoff Led
firmware (#122)
* Set Sonoff Led unconfigured floating outputs to 0 to reduce exceptions
due to power supply instabilities (#122)
* Add Access Point Mac Address to Status 11 and Telemetry (#329)
* Fix DS18B20 negative temperature readings (#334)
2017-04-10 17:25:31 +02:00
arendst fcb380ce2c v4.1.2
4.1.2 20170403
* Rename Unrecognised command to Unknown command
* Remove all command lists
* Remove command SmartConfig (superseded by WifiConfig)
* Fix boot loop when selecting module Sonoff 4CH or Sonoff Touch on non
ESP8285 hardware
* Add optional support for Toshiba and Mitsubishi HVAC IR control (needs
updated IRanother  (#257)
* Add all configured switches to Domoticz Configuration web page (#305)
* Fix compile error when selecting WS2812 DMA (#313)
2017-04-03 16:38:15 +02:00
arendst a8f2293a66 v4.1.1
4.1.1 20170329
* Fix default Telemetry for command Prefix3
* Fix webserver Module parameters for disabled select
* Fix sensor status for enabled switches
* Remove Light as alternative for Power (save code space)
* Remove migration option from pre V3 (code cleanup)
* Remove unofficial SPIFFS support (code cleanup)
* Remove command list when unknown command is entered (save code space)
* Rename Status11 json from StatusPWR to unique StatusSTS
* Rename command Gateway to IPAddres2, Subnetmask to IPAddress3 and
DnsServer to IPAddress4 (save code space)
* Add Command MqttResponse to select either command or RESULT topic as
response (#258)
* Add command StateText1 to StateText3 to assign MQTT_STATUS_OFF,
MQTT_STATUS_ON and MQTT_CMND_TOGGLE respectively (#286)
* Remove restart after IPAddress changes (#292)
* Add support for MAX31850 in xsns_ds18x20.ino (#295)
* Fix possible uptime update misses (#302)
2017-03-29 18:42:05 +02:00
arendst ae27ec26a4 v4.1.0
4.1.0 20170325
* Change static IP addresses in user_config.h from list (using commas)
to string (using dots)
* Unify display result of commands Modules, Module and Gpios
* Rewrite Module selection web page to bring size down from 18651 to
4319 bytes (!) (#234, #240)
* Add basic support for (Lixada) H801 RGBWW controller (#252)
* Add command Prefix1 to Prefix3 to assign SUB_PREFIX, PUB_PREFIX and
PUB_PREFIX2 respectively (#255)
* Add static ip addresses to flash (#262)
* Add commands IpAddress, Gateway, Subnetmask and DnsServer to select
static ip addresses (#273)
2017-03-25 17:24:11 +01:00
arendst 99b7474ac4 v4.0.8
4.0.8 20170321
* Fix entering non-numeric webpassword
* Force selection between TLS or Webserver due to memory restraint
(#240)
* Allow entering empty string using "0" for selected commands (#242)
* Fix exception when posting commands to web console containing % (#250)
2017-03-21 16:17:28 +01:00
arendst 742a87df8a v4.0.7
4.0.7 20170319
* Increased Sonoff Led PWM frequency from 432 to 1000
* Fix possible watch dog reboot after changing module type on web page
* Fix reporting of GPIO usage from web page
* Fix Sonoff Led blank during firmware upgrade
* Fix Sonoff Led flicker and possible flash corruption by using latest
Arduino-esp8266 versions
*   of pwm core files included in sonoff library (#211)
* Add PWM output control with commands PWM1 to PWM5 using user
selectable GPIOs (#211)
* Fix exceptions due to low values of commands HlwPCal (10000), HlwUCal
(1000) and HlwICal (2500) (#223)
* Add Switch state to sensor status (#227, #233)
* Add user configuarble GPIO to module Sonoff Touch (#228)
* Add define WEB_PORT to user_config.h to change default web server port
from 80 (#232)
* Fix failed Ota Firmware upgrade started from Web page (#235)
2017-03-19 18:19:08 +01:00
arendst c4cdd4459c v4.0.6
4.0.6 20170316
* Fix to better find device by Wifi hostname
* Fix compile error when some I2C devices are disabled
* Add (experimental) support for SHT1X emulating I2C (#97)
* Add ADC to ElectroDragon (#203)
* Add support for Sonoff Dev (#206)
2017-03-16 16:23:11 +01:00
Theo Arends 7aebdbbacf Update README.md 2017-03-15 12:46:46 +01:00
Theo Arends 7aa1df1da8 Update README.md 2017-03-15 12:17:11 +01:00
Theo Arends 06ba6b2b20 Update README.md 2017-03-15 12:15:28 +01:00
Theo Arends d9c654a2b1 Update README.md 2017-03-15 12:14:04 +01:00
Theo Arends a68d9aeb6d Update README.md 2017-03-15 12:13:06 +01:00
Theo Arends 29ee113153 Update README.md 2017-03-14 23:06:15 +01:00
Theo Arends 919e861456 Update README.md 2017-03-14 23:05:21 +01:00
Theo Arends 9729a50098 Update README.md 2017-03-14 23:03:13 +01:00
Theo Arends 4952eeb71b Update README.md 2017-03-14 23:02:16 +01:00
Theo Arends 97bc30a25b Update README.md 2017-03-14 23:01:31 +01:00
Theo Arends a566c3fc6c Update README.md 2017-03-14 23:00:18 +01:00
Theo Arends e7ab4b9702 Update README.md 2017-03-14 22:59:21 +01:00
Theo Arends 5d44b1dc31 Update README.md 2017-03-14 22:58:04 +01:00
Theo Arends f9e8359756 update 2017-03-14 22:56:41 +01:00
Theo Arends 00036420c0 Update README.md 2017-03-14 22:54:08 +01:00
Theo Arends eb98a653f5 Update README.md 2017-03-14 22:51:22 +01:00
arendst 67fe118dfe v4.0.5
4.0.5 20170314
* Add command Status 11 to show power status with Vcc if define
USE_ADC_VCC is enabled (default)
* Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with
define USE_ADC_VCC disabled (#137)
* Add MQTT host:port to timeout message (#199)
2017-03-14 18:03:25 +01:00
arendst 5e4157ebe4 Revert "v4.0.5"
This reverts commit 18a1f5e5df.
2017-03-14 15:40:24 +01:00
arendst 18a1f5e5df v4.0.5
4.0.5 20170314
* Add command Status 11 to show power status with Vcc if define
USE_ADC_VCC is enabled (default)
* Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with
define USE_ADC_VCC disabled (#137)
* Add MQTT host:port to timeout message (#199)
2017-03-14 12:36:06 +01:00
arendst b85fef0479 v4.0.4
4.0.4 20170312
* Add pulse timers for up to 4 relays (#106)
* Fix Sonoff Led power state when dimmer or color is 0 (#176)
* Add command NtpServer<x> to configure up to three NTP servers (#177)
* Delete module User Test as module Wemos D1 mini has same/more user
configurable GPIO (#178)
* Add more user configurable GPIO to module ElectroDragon (#183)
2017-03-12 18:36:33 +01:00
arendst 59bb20d2cb v4.0.3
4.0.3 20170309
* Renamed Module NodeMCU to WeMos D1 mini
* Add GPIO1 as user option to some modules
* Add Buttons, Relays and Leds to user configurable options (#159)
* Add description on Module parameters web page to some well known GPIOs
(#107, #171)
2017-03-09 17:48:04 +01:00
arendst ac84010015 v4.0.2
4.0.2 20170308
* Restore correct seriallog level after Serial logging was disabled
* Add simple dimmer slider to Sonoff Led web page
* Reduced root webpage size by 31%
* Expand Status 2 with Build date/time and core version
* Fix webserver redirection when not in WifiManager mode (#156)
* Add command ButtonRestrict On/Off to restrict access to button hold
and button multi press options above 2 (#161)
* Fix DS18S20 negative temperature readings (#165)
* Fix crlf compilation error due to bad syntax (#144, #167)
2017-03-08 16:20:45 +01:00
arendst 47d711b1b2 v4.0.1
4.0.1 20170305
* Fix char default sizes and set MESSZ to 360 (#143)
* Fix SerialLog setting status
* Disable syslog when emulation is active
* Add DS18B20 web page display refresh
2017-03-05 15:07:30 +01:00
arendst acb5252b54 v4.0.0
4.0.0 20170303
* Add define to remove config migration code for versions below 3.0 (See
Wiki-Upgrade-Migration path)
* Free memory by switching from String to char[]
* Raised Sonoff Led PWM frequency from 200Hz to 432Hz in search of
stability (hardware watchdog timeouts) (#122)
* Increase message size and suggested minimum MQTT_MAX_PACKET_SIZE to
512 (#114, #124)
* Remove runtime warning message regarding MQTT_MAX_PACKET_SIZE too
small as it is now moved to compile time (#124)
* Fix possible panics with web console and http commands while UDP
syslog is active (#127)
* Add optional static IP address (#129)
* Add define ENERGY_RESOLUTION in user_config.h to allow user control
over precision (#136)
2017-03-03 12:35:23 +01:00
arendst fc3b7e22ab v3.9.22
3.9.22 20170228
* Update web console
* Fix Status 4 JSON message
* Add Exception info during restart if available
* Add osWatch service to detect loop hangs that might happen during
(OTA) upgrades
* Add WiOn support for relay and switch only (#82, #102)
* Allow for user specified relay count up to four in sonoff_template.h
(#109)
* Add support for HTU21 compatible I2C sensors SI7013, SI7020 and SI7021
(#118)
* Add NodeMCU or Wemos configuration option (#119)
2017-02-28 16:01:48 +01:00
arendst 3fefb9b931 v3.9.21
3.9.21 20170224
* Add ajax to web root page and web console (#79)
* Add commands SwitchMode1..4 and enable user switches 2, 3 and 4 (#84,
#88)
* Fix MQTT upgrade when webserver is active
2017-02-24 18:17:48 +01:00
arendst 3f73e48bfa v3.9.20
3.9.20 20170221
* Add minimal basic authentication to Web Admin mode (#87)
* Fix Hue and add HSB support (#89)
2017-02-21 18:14:33 +01:00
arendst 18aaf05622 v3.9.19
3.9.19 20170219
* Sonoff Led: Made GPIO04, 05 and 15 available for user
* Sonoff Led: Add commands Fade, Speed, WakupDuration, Wakeup and
LedTable
2017-02-19 17:49:17 +01:00
arendst 3997f48809 v3.9.18
3.9.18 20170218
* Fix ledstate 0 to turn off led
* Fix Sonoff Led dimmer range (#16)
* Change Sonoff Led command Dimmer to act on both cold and warm color
* Add Sonoff Led command Color CCWW where CCWW are hexadecimal values
fro 00 - FF
* Reduce Sonoff Led flickering by disabling interrupts during flash save
and disabling
*   Led during OTA upgrade and Web upload (#16)
2017-02-18 18:08:55 +01:00
arendst edca508f57 v3.9.17
3.9.17 20170217
* Fix possible ArduinoJSON related memory fragmentation
* Changed console logging using less memory
* Add GPIO04 as user selectable for Sonoff Dual (#75)
2017-02-17 17:18:41 +01:00
arendst 381bb4b50c v3.9.16
3.9.16 20170214
* Update latching relay handler
* Add support for IR led using IRremoteESP8266 library (#59)
* Add Hue argument passing using ArduinoJSON library (#59)
2017-02-14 14:27:08 +01:00
arendst 533855c210 v3.9.15
3.9.15 20170213
* Change JSON float values from string to number according to
http://json.org (#56)
* Add support for exs latched relay module
https://ex-store.de/ESP8266-WiFi-Relay-V31 (#58)
* Add support for inverted relays
* Changed MAX_LOG_LINES from 70 to 60 to preserve memory
2017-02-13 17:25:46 +01:00
arendst bb5251c2c8 v3.9.14
3.9.14 20170211
* Add False and True as alternatives for 0/Off and 1/On (#49)
* Fix Status10 JSON format (#52)
* Fix DS18x20 using OneWire library (#53)
2017-02-11 15:06:23 +01:00
arendst cbd1904b42 v3.9.13
3.9.13 20170210
* Add FlashChipSize to Status 4
* Removed redundant DHT2 option and code
* Add Sonoff SV GPIO pin 05 configuration (#40)
* Add configuration file backup and restore via web page
* Fix latency due to light_sleep mode even if sleep was set to zero
(#50)
2017-02-10 17:03:34 +01:00
arendst 971ffef4a9 v3.9.12
3.9.12 20170208
* Fix compile error when webserver is disabled (#30)
* Fix possible ESP8285 flash problem by updating Flash Chip Mode to DOUT
during OTA upload
* Fix hostname issues by not allowing user entry of string formatting
and removing from user_config.h (#36)
2017-02-08 12:56:51 +01:00
arendst 5dc7b633bb v3.9.11
3.9.11 20170204
* Fix command I2Cscan
* Fix not allowed spaces in Topic, ButtonTopic and SwitchTopic
* Make all TELEMETRY, STATUS and COMMAND message topics unique (#4)
* Advertise command topic to be used by iobroker (#299)
* Fix butten (non)detection if no GPIO_KEY1 is defined (#13)
* Change WeMo serialnumber from 7 decimal chars to 8 hexadecimal chars
(#18)
* Update web page with Build Date/Time, Emulation and mDNS Discovery and
Advertise information (#21)
2017-02-04 17:23:29 +01:00
arendst b2b3170d8e Merge remote-tracking branch 'origin/master'
sync
2017-02-04 17:19:58 +01:00
arendst 213e8d8095 v3.9.11
3.9.11 20170204
* Fix command I2Cscan
* Fix not allowed spaces in Topic, ButtonTopic and SwitchTopic
* Make all TELEMETRY, STATUS and COMMAND message topics unique (#4)
* Advertise command topic to be used by iobroker (#299)
* Fix butten (non)detection if no GPIO_KEY1 is defined (#13)
* Change WeMo serialnumber from 7 decimal chars to 8 hexadecimal chars
(#18)
* Update web page with Build Date/Time, Emulation and mDNS Discovery and
Advertise information (#21)
2017-02-04 17:09:54 +01:00
arendst f9e8cbdfc9 v3.9.10
3.9.10 20170130
* Add WS2812 Color Type selection (RGB or GRB) to user_config.h (#7)
* Hue api changes to support HUE App(s) (#8)
2017-01-30 17:22:17 +01:00
arendst aaf75f6acb v3.9.9
3.9.9 20170130
* Add command status 10 showing sensor data
* Fix hlw status messages if hlw is disabled
* Remove GPIO07 and GPIO08 from user selectable (#5)
2017-01-30 10:58:35 +01:00
arendst 571666870b v3.9.8
3.9.8 20170130
* Remove GPIO07 and GPIO08 from user selectable (#5)
2017-01-30 09:25:59 +01:00
arendst 7d7d14ae38 v3.9.7
3.9.7 20170129
* Fix possible WS2812 exceptions when using emulation
* Add command Emulation to dynamic configure Belkin WeMo and Hue Bridge
for Alexa
2017-01-29 21:36:12 +01:00
arendst c0d98c8945 fix wiki link 2017-01-29 16:26:09 +01:00
arendst b68c5d49b2 v3.9.6
3.9.6 20170129
* Add dynamic sleep for WS2812 animation (#1)
2017-01-29 14:52:31 +01:00
arendst cc35f184ea v3.9.5 2017-01-28 19:58:26 +01:00
arendst eaf9e3d6cf v3.9.5
3.9.5 2017018
* Fix error message in case of wrong Domoticz command
2017-01-28 16:31:11 +01:00
arendst ae935d4676 v3.9.4 2017-01-28 15:00:18 +01:00
arendst 3d182320ec v3.9.4 2017-01-28 14:43:41 +01:00
arendst 797b9a9a9e v3.9.4 2017-01-28 14:41:37 +01:00
Theo Arends cde3982940 Initial commit 2017-01-28 14:37:08 +01:00