Support subscribe/unsubscribe MQTT topics and trigger specified event with the subscribed MQTT topic.
You can subscribe a MQTT topic and assign an event name. Once we received subscribed MQTT message, an event will be automatically triggered. So you can set up a rule with "ON EVENT#<event_name> DO ..." to do whatever you want based on this MQTT message. The payload is passed as a parameter once the event been triggered. If the payload is in JSON format, you are able to get the value of specified key as parameter.
For example, if you have a Tasmota based thermostat and multiple temperature sensors in different place, usually you have to set up a centre home automation system like Domoticz to control the thermostat. Right now, with this new feature, you can write a rule to do this.
Two new commands in Rules:
1. Subscribe
Subscribe a MQTT topic (with or without key) and assign an event name to it.
Command format:
Subscribe [<event_name>, <topic> [, <key>]]
This command will subscribe a <topic> and give it an event name <event_name>.
The optional parameter <key> is for parse the specified key/value from MQTT message
payload with JSON format.
In order to parse value from two level JSON data, you can use one dot (".") to split the key into two section.
Subscribe command without any parameter will list all topics currently subscribed.
2. Unsubscribe
Unsubscribe specified MQTT event.
Command format:
Unsubscribe [<event_name>]
Unsubscribe a topic subscribed by specify the event name.
If no event specified, Unsubscribe all topics subscribed.
Examples:
1.
Subscribe BkLight, Tasmota/BackyardLight/stat/POWER
And define a rule like:
Rule1 on event#BkLight=ON do ruletimer4 60 endon
2.
Subscribe DnTemp, Tasmota/RoomSensor1/stat/SENSOR, DS18B20.Temperature
Define a rule to deal with the MQTT message like {"Time":"2017-02-16T10:13:52", "DS18B20":{"Temperature":20.6}}
Rule1 ON EVENT#DnTemp>=21 DO ... ENDON
* Fix some exceptions and watchdogs due to lack of stack space - part 2
* Add command SetOption62 0/1 to disable retain on Button or Swith hold messages (#5299)
* Add option WifiConfig 7 to allow reset of device in AP mode without admin password (#5297)
Add two variables:
- UtcTime
The number of seconds that have elapsed since January 1, 1970 (midnight UTC/GMT)
- LocalTime
Seconds passed after Jan 1, 1970 midnight base on current timezone and daylight saving setting.
HttpGet command send a HTTP Get request to specified URL and return the response from website or error message if failed.
Note: This command support URL encoding, so you do not have to do encode by yourself. For example replacing all " " with %20 is no necessary.
Format:
httpget <url>
With HttpGet command you can do a lot of things.
For example:
- Retrieve your physical location:
httpget http://ipinfo.io/geo
Result is a JSON object
{
"ip": "8.8.8.8",
"city": "Mountain View",
"region": "California",
"country": "US",
"loc": "37.3860,-122.0840",
"postal": "94035",
"phone": "650"
}
- Control another Sonoff switch directly:
httpget http://192.168.1.130/cm?cmnd=power off
* Add property LinkCount to state and status 11 message representing number of Wifi Link re-connections
* Add property MqttCount to status 6 message representing number of Mqtt re-connections
Laurent
Theo Arends
Jörg R. Weimar
Jason2866
netpok
Norbert Richter
andrethomas
znanev