A universal/common/generic interface for controling supported A/Cs. More...

#include <IRac.h>

Collaboration diagram for IRac:

Public Member Functions
	IRac (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	markAsSent (void)
	Update the previous state to the current one. More...

bool	sendAc (void)
	Send an A/C message based soley on our internal state. More...

bool	sendAc (const stdAc::state_t desired, const stdAc::state_t *prev=NULL)
	Send A/C message for a given device using state_t structures. More...

bool	sendAc (const decode_type_t vendor, const int16_t model, const bool power, const stdAc::opmode_t mode, const float degrees, const bool celsius, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool light, const bool filter, const bool clean, const bool beep, const int16_t sleep=-1, const int16_t clock=-1)
	Send A/C message for a given device using common A/C settings. More...

stdAc::state_t	getState (void)
	Get the current internal A/C climate state. More...

stdAc::state_t	getStatePrev (void)
	Get the previous internal A/C climate state that should have already been sent to the device. i.e. What the A/C unit should already be set to. More...

bool	hasStateChanged (void)
	Check if the internal state has changed from what was previously sent. More...

Static Public Member Functions
static bool	isProtocolSupported (const decode_type_t protocol)
	Is the given protocol supported by the IRac class? More...

static void	initState (stdAc::state_t *state, const decode_type_t vendor, const int16_t model, const bool power, const stdAc::opmode_t mode, const float degrees, const bool celsius, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool light, const bool filter, const bool clean, const bool beep, const int16_t sleep, const int16_t clock)
	Initialse the given state with the supplied settings. More...

static void	initState (stdAc::state_t *state)
	Initialse the given state with the supplied settings. More...

static bool	cmpStates (const stdAc::state_t a, const stdAc::state_t b)
	Compare two AirCon states. More...

static bool	strToBool (const char *str, const bool def=false)
	Convert the supplied str into the appropriate boolean value. More...

static int16_t	strToModel (const char *str, const int16_t def=-1)
	Convert the supplied str into the appropriate enum. More...

static stdAc::opmode_t	strToOpmode (const char *str, const stdAc::opmode_t def=stdAc::opmode_t::kAuto)
	Convert the supplied str into the appropriate enum. More...

static stdAc::fanspeed_t	strToFanspeed (const char *str, const stdAc::fanspeed_t def=stdAc::fanspeed_t::kAuto)
	Convert the supplied str into the appropriate enum. More...

static stdAc::swingv_t	strToSwingV (const char *str, const stdAc::swingv_t def=stdAc::swingv_t::kOff)
	Convert the supplied str into the appropriate enum. More...

static stdAc::swingh_t	strToSwingH (const char *str, const stdAc::swingh_t def=stdAc::swingh_t::kOff)
	Convert the supplied str into the appropriate enum. More...

static String	boolToString (const bool value)
	Convert the supplied boolean into the appropriate String. More...

static String	opmodeToString (const stdAc::opmode_t mode)
	Convert the supplied operation mode into the appropriate String. More...

static String	fanspeedToString (const stdAc::fanspeed_t speed)
	Convert the supplied fan speed enum into the appropriate String. More...

static String	swingvToString (const stdAc::swingv_t swingv)
	Convert the supplied enum into the appropriate String. More...

static String	swinghToString (const stdAc::swingh_t swingh)
	Convert the supplied enum into the appropriate String. More...

Public Attributes
stdAc::state_t	next
	The state we want the device to be in after we send. More...

Private Member Functions
void	airwell (IRAirwellAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan)
	Send an Airwell A/C message with the supplied settings. More...

void	amcor (IRAmcorAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan)
	Send an Amcor A/C message with the supplied settings. More...

void	argo (IRArgoAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const int16_t sleep=-1)
	Send an Argo A/C message with the supplied settings. More...

void	carrier64 (IRCarrierAc64 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const int16_t sleep=-1)
	Send a Carrier 64-bit A/C message with the supplied settings. More...

void	coolix (IRCoolixAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool light, const bool clean, const int16_t sleep=-1)
	Send a Coolix A/C message with the supplied settings. More...

void	corona (IRCoronaAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool econo)
	Send a Corona A/C message with the supplied settings. More...

void	daikin (IRDaikinESP *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool clean)
	Send a Daikin A/C message with the supplied settings. More...

void	daikin128 (IRDaikin128 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool quiet, const bool turbo, const bool light, const bool econo, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Daikin 128-bit A/C message with the supplied settings. More...

void	daikin152 (IRDaikin152 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool quiet, const bool turbo, const bool econo)
	Send a Daikin 152-bit A/C message with the supplied settings. More...

void	daikin160 (IRDaikin160 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv)
	Send a Daikin 160-bit A/C message with the supplied settings. More...

void	daikin176 (IRDaikin176 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingh_t swingh)
	Send a Daikin 176-bit A/C message with the supplied settings. More...

void	daikin2 (IRDaikin2 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool light, const bool econo, const bool filter, const bool clean, const bool beep, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Daikin2 A/C message with the supplied settings. More...

void	daikin216 (IRDaikin216 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo)
	Send a Daikin 216-bit A/C message with the supplied settings. More...

void	daikin64 (IRDaikin64 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool quiet, const bool turbo, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Daikin 64-bit A/C message with the supplied settings. More...

void	delonghiac (IRDelonghiAc *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const bool turbo, const int16_t sleep=-1)
	Send a Delonghi A/C message with the supplied settings. More...

void	electra (IRElectraAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool lighttoggle, const bool clean)
	Send an Electra A/C message with the supplied settings. More...

void	fujitsu (IRFujitsuAC *ac, const fujitsu_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool filter, const bool clean, const int16_t sleep=-1)
	Send a Fujitsu A/C message with the supplied settings. More...

void	goodweather (IRGoodweatherAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool light, const int16_t sleep=-1)
	Send a Goodweather A/C message with the supplied settings. More...

void	gree (IRGreeAC *ac, const gree_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool light, const bool clean, const int16_t sleep=-1)
	Send a Gree A/C message with the supplied settings. More...

void	haier (IRHaierAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool filter, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Haier A/C message with the supplied settings. More...

void	haierYrwo2 (IRHaierACYRW02 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool filter, const int16_t sleep=-1)
	Send a Haier YRWO2 A/C message with the supplied settings. More...

void	hitachi (IRHitachiAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh)
	Send a Hitachi A/C message with the supplied settings. More...

void	hitachi1 (IRHitachiAc1 *ac, const hitachi_ac1_remote_model_t model, const bool on, const bool power_toggle, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool swing_toggle, const int16_t sleep=-1)
	Send a Hitachi1 A/C message with the supplied settings. More...

void	hitachi344 (IRHitachiAc344 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh)
	Send a Hitachi 344-bit A/C message with the supplied settings. More...

void	hitachi424 (IRHitachiAc424 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv)
	Send a Hitachi 424-bit A/C message with the supplied settings. More...

void	kelvinator (IRKelvinatorAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool light, const bool filter, const bool clean)
	Send a Kelvinator A/C message with the supplied settings. More...

void	lg (IRLgAc *ac, const lg_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan)
	Send a LG A/C message with the supplied settings. More...

void	midea (IRMideaAC *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool econo, const int16_t sleep=-1)
	Send a Midea A/C message with the supplied settings. More...

void	mitsubishi (IRMitsubishiAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const int16_t clock=-1)
	Send a Mitsubishi A/C message with the supplied settings. More...

void	mitsubishi112 (IRMitsubishi112 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet)
	Send a Mitsubishi 112-bit A/C message with the supplied settings. More...

void	mitsubishi136 (IRMitsubishi136 *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool quiet)
	Send a Mitsubishi 136-bit A/C message with the supplied settings. More...

void	mitsubishiHeavy88 (IRMitsubishiHeavy88Ac *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool econo, const bool clean)
	Send a Mitsubishi Heavy 88-bit A/C message with the supplied settings. More...

void	mitsubishiHeavy152 (IRMitsubishiHeavy152Ac *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool econo, const bool filter, const bool clean, const int16_t sleep=-1)
	Send a Mitsubishi Heavy 152-bit A/C message with the supplied settings. More...

void	neoclima (IRNeoclimaAc *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool econo, const bool light, const bool filter, const int16_t sleep=-1)
	Send a Neoclima A/C message with the supplied settings. More...

void	panasonic (IRPanasonicAc *ac, const panasonic_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool quiet, const bool turbo, const bool filter, const int16_t clock=-1)
	Send a Panasonic A/C message with the supplied settings. More...

void	samsung (IRSamsungAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool quiet, const bool turbo, const bool light, const bool filter, const bool clean, const bool beep, const bool prevpower=true, const bool forcepower=true)
	Send a Samsung A/C message with the supplied settings. More...

void	sanyo (IRSanyoAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool beep, const int16_t sleep=-1)
	Send a Toshiba A/C message with the supplied settings. More...

void	sharp (IRSharpAc *ac, const bool on, const bool prev_power, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool filter, const bool clean)
	Send a Sharp A/C message with the supplied settings. More...

void	tcl112 (IRTcl112Ac *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool light, const bool econo, const bool filter)
	Send a TCL 112-bit A/C message with the supplied settings. More...

void	technibel (IRTechnibelAc *ac, const bool on, const stdAc::opmode_t mode, const bool celsius, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const int16_t sleep=-1)
	Send a Technibel A/C message with the supplied settings. More...

void	teco (IRTecoAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool light, const int16_t sleep=-1)
	Send a Teco A/C message with the supplied settings. More...

void	toshiba (IRToshibaAC *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool econo)
	Send a Toshiba A/C message with the supplied settings. More...

void	trotec (IRTrotecESP *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const int16_t sleep=-1)
	Send a Trotec A/C message with the supplied settings. More...

void	vestel (IRVestelAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool filter, const int16_t sleep=-1, const int16_t clock=-1, const bool sendNormal=true)
	Send a Vestel A/C message with the supplied settings. More...

void	voltas (IRVoltas *ac, const voltas_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh, const bool turbo, const bool econo, const bool light, const int16_t sleep=-1)
	Send a Voltas A/C message with the supplied settings. More...

void	whirlpool (IRWhirlpoolAc *ac, const whirlpool_ac_remote_model_t model, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const bool turbo, const bool light, const int16_t sleep=-1, const int16_t clock=-1)
	Send a Whirlpool A/C message with the supplied settings. More...

void	transcold (IRTranscoldAc *ac, const bool on, const stdAc::opmode_t mode, const float degrees, const stdAc::fanspeed_t fan, const stdAc::swingv_t swingv, const stdAc::swingh_t swingh)
	Send a Transcold A/C message with the supplied settings. More...

Static Private Member Functions
static stdAc::state_t	cleanState (const stdAc::state_t state)
	Create a new state base on the provided state that has been suitably fixed. More...

static stdAc::state_t	handleToggles (const stdAc::state_t desired, const stdAc::state_t *prev=NULL)
	Create a new state base on desired & previous states but handle any state changes for options that need to be toggled. More...

Private Attributes
uint16_t	_pin
	The GPIO to use to transmit messages from. More...

bool	_inverted
	IR LED is lit when GPIO is LOW (true) or HIGH (false)? More...

bool	_modulation
	Is frequency modulation to be used? More...

stdAc::state_t	_prev
	The state we expect the device to currently be in. More...

Detailed Description

A universal/common/generic interface for controling supported A/Cs.

Constructor & Destructor Documentation

◆ IRac()

IRac::IRac	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	Gpio pin to use when transmitting IR messages.
[in]	inverted	true, gpio output defaults to high. false, to low.
[in]	use_modulation	true means use frequency modulation. false, don't.

Member Function Documentation

◆ airwell()

void IRac::airwell	(	IRAirwellAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan
	)

private

Send an Airwell A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRAirwellAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.

◆ amcor()

void IRac::amcor	(	IRAmcorAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan
	)

private

Send an Amcor A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRAmcorAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.

◆ argo()

void IRac::argo	(	IRArgoAC *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	turbo,
		const int16_t	sleep = `-1`
	)

private

Send an Argo A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRArgoAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	sleep	Nr. of minutes for sleep mode.

Note: -1 is Off, >= 0 is on.

◆ boolToString()

String IRac::boolToString ( const bool value )

static

Convert the supplied boolean into the appropriate String.

Parameters

[in] value The boolean value to be converted.

Returns: The equivilent String for the locale.

◆ carrier64()

void IRac::carrier64	(	IRCarrierAc64 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const int16_t	sleep = `-1`
	)

private

Send a Carrier 64-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRCarrierAc64 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	sleep	Nr. of minutes for sleep mode.

Note: -1 is Off, >= 0 is on.

◆ cleanState()

stdAc::state_t IRac::cleanState ( const stdAc::state_t state )

staticprivate

Create a new state base on the provided state that has been suitably fixed.

Note: This is for use with Home Assistant, which requires mode to be off if the power is off.

Parameters

[in] state The state_t structure describing the desired a/c state.

Returns: A stdAc::state_t with the needed settings.

◆ cmpStates()

bool IRac::cmpStates	(	const stdAc::state_t	a,
		const stdAc::state_t	b
	)

static

Compare two AirCon states.

Note: The comparison excludes the clock.

Parameters

a	A state_t to be compared.
b	A state_t to be compared.

Returns: True if they differ, False if they don't.

◆ coolix()

void IRac::coolix	(	IRCoolixAC *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	turbo,
		const bool	light,
		const bool	clean,
		const int16_t	sleep = `-1`
	)

private

Send a Coolix A/C message with the supplied settings.

Note: May result in multiple messages being sent.

Parameters

[in,out]	ac	A Ptr to an IRCoolixAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	sleep	Nr. of minutes for sleep mode.

Note: -1 is Off, >= 0 is on.

◆ corona()

void IRac::corona	(	IRCoronaAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	econo
	)

private

Send a Corona A/C message with the supplied settings.

Note: May result in multiple messages being sent.

Parameters

[in,out]	ac	A Ptr to an IRCoronaAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	econo	Run the device in economical mode.

◆ daikin()

void IRac::daikin	(	IRDaikinESP *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const bool	turbo,
		const bool	econo,
		const bool	clean
	)

private

Send a Daikin A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikinESP object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc

◆ daikin128()

void IRac::daikin128	(	IRDaikin128 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	quiet,
		const bool	turbo,
		const bool	light,
		const bool	econo,
		const int16_t	sleep = `-1`,
		const int16_t	clock = `-1`
	)

private

Send a Daikin 128-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin128 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	econo	Run the device in economical mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

◆ daikin152()

void IRac::daikin152	(	IRDaikin152 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	quiet,
		const bool	turbo,
		const bool	econo
	)

private

Send a Daikin 152-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin152 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.

◆ daikin160()

void IRac::daikin160	(	IRDaikin160 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv
	)

private

Send a Daikin 160-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin160 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.

◆ daikin176()

void IRac::daikin176	(	IRDaikin176 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingh_t	swingh
	)

private

Send a Daikin 176-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin176 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingh	The horizontal swing setting.

◆ daikin2()

void IRac::daikin2	(	IRDaikin2 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const bool	turbo,
		const bool	light,
		const bool	econo,
		const bool	filter,
		const bool	clean,
		const bool	beep,
		const int16_t	sleep = `-1`,
		const int16_t	clock = `-1`
	)

private

Send a Daikin2 A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin2 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	econo	Run the device in economical mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	beep	Enable/Disable beeps when receiving IR messages.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

◆ daikin216()

void IRac::daikin216	(	IRDaikin216 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const bool	turbo
	)

private

Send a Daikin 216-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin216 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.

◆ daikin64()

void IRac::daikin64	(	IRDaikin64 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	quiet,
		const bool	turbo,
		const int16_t	sleep = `-1`,
		const int16_t	clock = `-1`
	)

private

Send a Daikin 64-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDaikin64 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

◆ delonghiac()

void IRac::delonghiac	(	IRDelonghiAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const bool	celsius,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const bool	turbo,
		const int16_t	sleep = `-1`
	)

private

Send a Delonghi A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRDelonghiAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ electra()

void IRac::electra	(	IRElectraAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	turbo,
		const bool	lighttoggle,
		const bool	clean
	)

private

Send an Electra A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRElectraAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	lighttoggle	Should we toggle the LED/Display?
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc

◆ fanspeedToString()

String IRac::fanspeedToString ( const stdAc::fanspeed_t speed )

static

Convert the supplied fan speed enum into the appropriate String.

Parameters

[in] speed The enum to be converted.

Returns: The equivilent String for the locale.

◆ fujitsu()

void IRac::fujitsu	(	IRFujitsuAC *	ac,
		const fujitsu_ac_remote_model_t	model,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const bool	turbo,
		const bool	econo,
		const bool	filter,
		const bool	clean,
		const int16_t	sleep = `-1`
	)

private

Send a Fujitsu A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRFujitsuAC object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	sleep	Nr. of minutes for sleep mode. <= 0 is Off, > 0 is on.

◆ getState()

stdAc::state_t IRac::getState ( void )

Get the current internal A/C climate state.

Returns: A Ptr to a state containing the current (to be sent) settings.

◆ getStatePrev()

stdAc::state_t IRac::getStatePrev ( void )

Get the previous internal A/C climate state that should have already been sent to the device. i.e. What the A/C unit should already be set to.

Returns: A Ptr to a state containing the previously sent settings.

◆ goodweather()

void IRac::goodweather	(	IRGoodweatherAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	turbo,
		const bool	light,
		const int16_t	sleep = `-1`
	)

private

Send a Goodweather A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRGoodweatherAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ gree()

void IRac::gree	(	IRGreeAC *	ac,
		const gree_ac_remote_model_t	model,
		const bool	on,
		const stdAc::opmode_t	mode,
		const bool	celsius,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	turbo,
		const bool	light,
		const bool	clean,
		const int16_t	sleep = `-1`
	)

private

Send a Gree A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRGreeAC object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ haier()

void IRac::haier	(	IRHaierAC *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	filter,
		const int16_t	sleep = `-1`,
		const int16_t	clock = `-1`
	)

private

Send a Haier A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRGreeAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

◆ haierYrwo2()

void IRac::haierYrwo2	(	IRHaierACYRW02 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	turbo,
		const bool	filter,
		const int16_t	sleep = `-1`
	)

private

Send a Haier YRWO2 A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHaierACYRW02 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ handleToggles()

stdAc::state_t IRac::handleToggles	(	const stdAc::state_t	desired,
		const stdAc::state_t *	prev = `NULL`
	)

staticprivate

Create a new state base on desired & previous states but handle any state changes for options that need to be toggled.

Parameters

[in]	desired	The state_t structure describing the desired a/c state.
[in]	prev	A Ptr to the previous state_t structure.

Returns: A stdAc::state_t with the needed settings.

◆ hasStateChanged()

bool IRac::hasStateChanged ( void )

Check if the internal state has changed from what was previously sent.

Note: The comparison excludes the clock.

Returns: True if it has changed, False if not.

◆ hitachi()

void IRac::hitachi	(	IRHitachiAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh
	)

private

Send a Hitachi A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHitachiAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.

◆ hitachi1()

void IRac::hitachi1	(	IRHitachiAc1 *	ac,
		const hitachi_ac1_remote_model_t	model,
		const bool	on,
		const bool	power_toggle,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	swing_toggle,
		const int16_t	sleep = `-1`
	)

private

Send a Hitachi1 A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHitachiAc1 object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	power_toggle	The power toggle setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	swing_toggle	The swing_toggle setting.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

Note: The sleep mode used is the "Sleep 2" setting.

◆ hitachi344()

void IRac::hitachi344	(	IRHitachiAc344 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh
	)

private

Send a Hitachi 344-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHitachiAc344 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.

◆ hitachi424()

void IRac::hitachi424	(	IRHitachiAc424 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv
	)

private

Send a Hitachi 424-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRHitachiAc424 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.

◆ initState() [1/2]

void IRac::initState ( stdAc::state_t * state )

static

Initialse the given state with the supplied settings.

Parameters

[out] state A Ptr to where the settings will be stored.

Note: Sets all the parameters to reasonable base/automatic defaults.

◆ initState() [2/2]

void IRac::initState	(	stdAc::state_t *	state,
		const decode_type_t	vendor,
		const int16_t	model,
		const bool	power,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const bool	celsius,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const bool	turbo,
		const bool	econo,
		const bool	light,
		const bool	filter,
		const bool	clean,
		const bool	beep,
		const int16_t	sleep,
		const int16_t	clock
	)

static

Initialse the given state with the supplied settings.

Parameters

[out]	state	A Ptr to where the settings will be stored.
[in]	vendor	The vendor/protocol type.
[in]	model	The A/C model if applicable.
[in]	power	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	beep	Enable/Disable beeps when receiving IR messages.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on. Some devices it is the nr. of mins to run for. Others it may be the time to enter/exit sleep mode. i.e. Time in Nr. of mins since midnight.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

◆ isProtocolSupported()

bool IRac::isProtocolSupported ( const decode_type_t protocol )

static

Is the given protocol supported by the IRac class?

Parameters

[in] protocol The vendor/protocol type.

Returns: true if the protocol is supported by this class, otherwise false.

◆ kelvinator()

void IRac::kelvinator	(	IRKelvinatorAC *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const bool	turbo,
		const bool	light,
		const bool	filter,
		const bool	clean
	)

private

Send a Kelvinator A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRKelvinatorAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. XFan, dry filters etc

◆ lg()

void IRac::lg	(	IRLgAc *	ac,
		const lg_ac_remote_model_t	model,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan
	)

private

Send a LG A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRLgAc object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.

◆ markAsSent()

void IRac::markAsSent ( void )

Update the previous state to the current one.

◆ midea()

void IRac::midea	(	IRMideaAC *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const bool	celsius,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	econo,
		const int16_t	sleep = `-1`
	)

private

Send a Midea A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMideaAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	econo	Run the device in economical mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

Note: On Danby A/C units, swingv controls the Ion Filter instead.

◆ mitsubishi()

void IRac::mitsubishi	(	IRMitsubishiAC *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const int16_t	clock = `-1`
	)

private

Send a Mitsubishi A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishiAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

Note: Clock can only be set in 10 minute increments. i.e. % 10.

◆ mitsubishi112()

void IRac::mitsubishi112	(	IRMitsubishi112 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet
	)

private

Send a Mitsubishi 112-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishi112 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.

◆ mitsubishi136()

void IRac::mitsubishi136	(	IRMitsubishi136 *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	quiet
	)

private

Send a Mitsubishi 136-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishi136 object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	quiet	Run the device in quiet/silent mode.

◆ mitsubishiHeavy152()

void IRac::mitsubishiHeavy152	(	IRMitsubishiHeavy152Ac *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const bool	turbo,
		const bool	econo,
		const bool	filter,
		const bool	clean,
		const int16_t	sleep = `-1`
	)

private

Send a Mitsubishi Heavy 152-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishiHeavy152Ac object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ mitsubishiHeavy88()

void IRac::mitsubishiHeavy88	(	IRMitsubishiHeavy88Ac *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	turbo,
		const bool	econo,
		const bool	clean
	)

private

Send a Mitsubishi Heavy 88-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRMitsubishiHeavy88Ac object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc

◆ neoclima()

void IRac::neoclima	(	IRNeoclimaAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const bool	celsius,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	turbo,
		const bool	econo,
		const bool	light,
		const bool	filter,
		const int16_t	sleep = `-1`
	)

private

Send a Neoclima A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRNeoclimaAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ opmodeToString()

String IRac::opmodeToString ( const stdAc::opmode_t mode )

static

Convert the supplied operation mode into the appropriate String.

Parameters

[in] mode The enum to be converted.

Returns: The equivilent String for the locale.

◆ panasonic()

void IRac::panasonic	(	IRPanasonicAc *	ac,
		const panasonic_ac_remote_model_t	model,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const bool	turbo,
		const bool	filter,
		const int16_t	clock = `-1`
	)

private

Send a Panasonic A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRPanasonicAc object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

◆ samsung()

void IRac::samsung	(	IRSamsungAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	quiet,
		const bool	turbo,
		const bool	light,
		const bool	filter,
		const bool	clean,
		const bool	beep,
		const bool	prevpower = `true`,
		const bool	forcepower = `true`
	)

private

Send a Samsung A/C message with the supplied settings.

Note: Multiple IR messages may be generated & sent.

Parameters

[in,out]	ac	A Ptr to an IRSamsungAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	beep	Enable/Disable beeps when receiving IR messages.
[in]	prevpower	The power setting from the previous A/C state.
[in]	forcepower	Do we force send the special power message?

◆ sanyo()

void IRac::sanyo	(	IRSanyoAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	beep,
		const int16_t	sleep = `-1`
	)

private

Send a Toshiba A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRSanyoAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	beep	Enable/Disable beeps when receiving IR messages.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ sendAc() [1/3]

bool IRac::sendAc	(	const decode_type_t	vendor,
		const int16_t	model,
		const bool	power,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const bool	celsius,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	quiet,
		const bool	turbo,
		const bool	econo,
		const bool	light,
		const bool	filter,
		const bool	clean,
		const bool	beep,
		const int16_t	sleep = `-1`,
		const int16_t	clock = `-1`
	)

Send A/C message for a given device using common A/C settings.

Parameters

[in]	vendor	The vendor/protocol type.
[in]	model	The A/C model if applicable.
[in]	power	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	fan	The speed setting for the fan.

Note: The following are all "if supported" by the underlying A/C classes.

Parameters

[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	quiet	Run the device in quiet/silent mode.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	light	Turn on the LED/Display mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc
[in]	beep	Enable/Disable beeps when receiving IR messages.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on. Some devices it is the nr. of mins to run for. Others it may be the time to enter/exit sleep mode. i.e. Time in Nr. of mins since midnight.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

Returns: True, if accepted/converted/attempted etc. False, if unsupported.

◆ sendAc() [2/3]

bool IRac::sendAc	(	const stdAc::state_t	desired,
		const stdAc::state_t *	prev = `NULL`
	)

Send A/C message for a given device using state_t structures.

Parameters

[in]	desired	The state_t structure describing the desired new ac state
[in]	prev	A Ptr to the state_t structure containing the previous state

Returns: True, if accepted/converted/attempted etc. False, if unsupported.

◆ sendAc() [3/3]

bool IRac::sendAc ( void )

Send an A/C message based soley on our internal state.

Returns: True, if accepted/converted/attempted. False, if unsupported.

◆ sharp()

void IRac::sharp	(	IRSharpAc *	ac,
		const bool	on,
		const bool	prev_power,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	turbo,
		const bool	filter,
		const bool	clean
	)

private

Send a Sharp A/C message with the supplied settings.

Note: Multiple IR messages may be generated & sent.

Parameters

[in,out]	ac	A Ptr to an IRSharpAc object to use.
[in]	on	The power setting.
[in]	prev_power	The power setting from the previous A/C state.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	clean	Turn on the self-cleaning mode. e.g. Mould, dry filters etc

◆ strToBool()

bool IRac::strToBool	(	const char *	str,
		const bool	def = `false`
	)

static

Convert the supplied str into the appropriate boolean value.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The boolean value to return if no conversion was possible.

Returns: The equivilent boolean value.

◆ strToFanspeed()

stdAc::fanspeed_t IRac::strToFanspeed	(	const char *	str,
		const stdAc::fanspeed_t	def = `stdAc::fanspeed_t::kAuto`
	)

static

Convert the supplied str into the appropriate enum.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns: The equivilent enum.

◆ strToModel()

int16_t IRac::strToModel	(	const char *	str,
		const int16_t	def = `-1`
	)

static

Convert the supplied str into the appropriate enum.

Note: Assumes str is the model code or an integer >= 1.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns: The equivilent enum.

◆ strToOpmode()

stdAc::opmode_t IRac::strToOpmode	(	const char *	str,
		const stdAc::opmode_t	def = `stdAc::opmode_t::kAuto`
	)

static

Convert the supplied str into the appropriate enum.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns: The equivilent enum.

◆ strToSwingH()

stdAc::swingh_t IRac::strToSwingH	(	const char *	str,
		const stdAc::swingh_t	def = `stdAc::swingh_t::kOff`
	)

static

Convert the supplied str into the appropriate enum.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns: The equivilent enum.

◆ strToSwingV()

stdAc::swingv_t IRac::strToSwingV	(	const char *	str,
		const stdAc::swingv_t	def = `stdAc::swingv_t::kOff`
	)

static

Convert the supplied str into the appropriate enum.

Parameters

[in]	str	A Ptr to a C-style string to be converted.
[in]	def	The enum to return if no conversion was possible.

Returns: The equivilent enum.

◆ swinghToString()

String IRac::swinghToString ( const stdAc::swingh_t swingh )

static

Convert the supplied enum into the appropriate String.

Parameters

[in] swingh The enum to be converted.

Returns: The equivilent String for the locale.

◆ swingvToString()

String IRac::swingvToString ( const stdAc::swingv_t swingv )

static

Convert the supplied enum into the appropriate String.

Parameters

[in] swingv The enum to be converted.

Returns: The equivilent String for the locale.

◆ tcl112()

void IRac::tcl112	(	IRTcl112Ac *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	turbo,
		const bool	light,
		const bool	econo,
		const bool	filter
	)

private

Send a TCL 112-bit A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRTcl112Ac object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	econo	Run the device in economical mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.

◆ technibel()

void IRac::technibel	(	IRTechnibelAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const bool	celsius,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const int16_t	sleep = `-1`
	)

private

Send a Technibel A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRTechnibelAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	celsius	Temperature units. True is Celsius, False is Fahrenheit.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ teco()

void IRac::teco	(	IRTecoAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	light,
		const int16_t	sleep = `-1`
	)

private

Send a Teco A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRTecoAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	light	Turn on the LED/Display mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ toshiba()

void IRac::toshiba	(	IRToshibaAC *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	turbo,
		const bool	econo
	)

private

Send a Toshiba A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRToshibaAC object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.

◆ transcold()

void IRac::transcold	(	IRTranscoldAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh
	)

private

Send a Transcold A/C message with the supplied settings.

Note: May result in multiple messages being sent.

Parameters

[in,out]	ac	A Ptr to an IRTranscoldAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.

Note: -1 is Off, >= 0 is on.

◆ trotec()

void IRac::trotec	(	IRTrotecESP *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const int16_t	sleep = `-1`
	)

private

Send a Trotec A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRTrotecESP object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ vestel()

void IRac::vestel	(	IRVestelAc *	ac,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	turbo,
		const bool	filter,
		const int16_t	sleep = `-1`,
		const int16_t	clock = `-1`,
		const bool	sendNormal = `true`
	)

private

Send a Vestel A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRVestelAc object to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	filter	Turn on the (ion/pollen/etc) filter mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.
[in]	sendNormal	Do we send a Normal settings message at all? i.e In addition to the clock/time/timer message

◆ voltas()

void IRac::voltas	(	IRVoltas *	ac,
		const voltas_ac_remote_model_t	model,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const stdAc::swingh_t	swingh,
		const bool	turbo,
		const bool	econo,
		const bool	light,
		const int16_t	sleep = `-1`
	)

private

Send a Voltas A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRVoltas object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	swingh	The horizontal swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	econo	Run the device in economical mode.
[in]	light	Turn on the LED/Display mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.

◆ whirlpool()

void IRac::whirlpool	(	IRWhirlpoolAc *	ac,
		const whirlpool_ac_remote_model_t	model,
		const bool	on,
		const stdAc::opmode_t	mode,
		const float	degrees,
		const stdAc::fanspeed_t	fan,
		const stdAc::swingv_t	swingv,
		const bool	turbo,
		const bool	light,
		const int16_t	sleep = `-1`,
		const int16_t	clock = `-1`
	)

private

Send a Whirlpool A/C message with the supplied settings.

Parameters

[in,out]	ac	A Ptr to an IRWhirlpoolAc object to use.
[in]	model	The A/C model to use.
[in]	on	The power setting.
[in]	mode	The operation mode setting.
[in]	degrees	The temperature setting in degrees.
[in]	fan	The speed setting for the fan.
[in]	swingv	The vertical swing setting.
[in]	turbo	Run the device in turbo/powerful mode.
[in]	light	Turn on the LED/Display mode.
[in]	sleep	Nr. of minutes for sleep mode. -1 is Off, >= 0 is on.
[in]	clock	The time in Nr. of mins since midnight. < 0 is ignore.

Member Data Documentation

◆ _inverted

bool IRac::_inverted

private

IR LED is lit when GPIO is LOW (true) or HIGH (false)?

◆ _modulation

bool IRac::_modulation

private

Is frequency modulation to be used?

◆ _pin

uint16_t IRac::_pin

private

The GPIO to use to transmit messages from.

◆ _prev

stdAc::state_t IRac::_prev

private

The state we expect the device to currently be in.

◆ next

stdAc::state_t IRac::next

The state we want the device to be in after we send.

The documentation for this class was generated from the following files:

src/IRac.h
src/IRac.cpp

Public Member Functions

Static Public Member Functions

Public Attributes

Private Member Functions

Static Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRac()

Member Function Documentation

◆ airwell()

◆ amcor()

◆ argo()

◆ boolToString()

◆ carrier64()

◆ cleanState()

◆ cmpStates()

◆ coolix()

◆ corona()

◆ daikin()

◆ daikin128()

◆ daikin152()

◆ daikin160()

◆ daikin176()

◆ daikin2()

◆ daikin216()

◆ daikin64()

◆ delonghiac()

◆ electra()

◆ fanspeedToString()

◆ fujitsu()

◆ getState()

◆ getStatePrev()

◆ goodweather()

◆ gree()

◆ haier()

◆ haierYrwo2()

◆ handleToggles()

◆ hasStateChanged()

◆ hitachi()

◆ hitachi1()

◆ hitachi344()

◆ hitachi424()

◆ initState() [1/2]

◆ initState() [2/2]

◆ isProtocolSupported()

◆ kelvinator()

◆ lg()

◆ markAsSent()

◆ midea()

◆ mitsubishi()

◆ mitsubishi112()

◆ mitsubishi136()

◆ mitsubishiHeavy152()

◆ mitsubishiHeavy88()

◆ neoclima()

◆ opmodeToString()

◆ panasonic()

◆ samsung()

◆ sanyo()

◆ sendAc() [1/3]

◆ sendAc() [2/3]

◆ sendAc() [3/3]

◆ sharp()

◆ strToBool()

◆ strToFanspeed()

◆ strToModel()

◆ strToOpmode()

◆ strToSwingH()

◆ strToSwingV()

◆ swinghToString()

◆ swingvToString()

◆ tcl112()

◆ technibel()

◆ teco()

◆ toshiba()

◆ transcold()

◆ trotec()

◆ vestel()

◆ voltas()