mirror of https://github.com/arendst/Tasmota.git
11 KiB
11 KiB
Migration Information
See wiki migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
- Migrate to Sonoff-Tasmota 3.9.x
- Migrate to Sonoff-Tasmota 4.x
- Migrate to Sonoff-Tasmota 5.14
- Migrate to Sonoff-Tasmota 6.x
Release notes
Change in default initial configuration tool
Firmware binary sonoff-classic.bin supports WifiManager, Wps and SmartConfig for initial configuration. The default tool is Wps.
To save memory space all other binaries support WifiManager only.
See _changelog.ino how to enable them again.
- Define WIFI_CONFIG_TOOL now contains the default behaviour once a SSID has been configured.
- If no SSID is configured making a wifi connection impossible the new define WIFI_CONFIG_NO_SSID will be used.
- While define WIFI_CONFIG_NO_SSID is set to WIFI_WPSCONFIG in user_config.h the compiler will check for define USE_WPS and if not enabled WIFI_CONFIG_NO_SSID will default to WIFI_MANAGER using the webserver. If define USE_WEBSERVER is also not enabled WIFI_CONFIG_NO_SSID will default to WIFI_SMARTCONFIG. If define USE_SMARTCONFIG is also not enabled WIFI_CONFIG_NO_SSID will default to a new option WIFI_SERIAL allowing to enter wifi parameters to serial which is always possible.
Provided Binary Downloads
The following binary downloads have been compiled with ESP8266/Arduino library version 2.3.0
- sonoff-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.
- sonoff-classic.bin = The Classic version allows initial installation using either WifiManager, Wps or SmartConfig.
- sonoff.bin = The Sonoff version without Wps and SmartConfig configuration but adds more sensors.
- sonoff-BG.bin to sonoff-TW.bin = The Sonoff version without Wps and SmartConfig configuration in different languages.
- sonoff-sensors.bin = The Sensors version without Wps and SmartConfig configuration but adds even more useful sensors.
- sonoff-knx.bin = The Knx version without Wps and SmartConfig configuration and some other features but adds KNX support.
See Tasmota ESP/Arduino library version related issues why these files are still released using ESP/Arduino library version v2.3.0.
Available Features and Sensors
| Feature or Sensor | minimal | classic | sonoff | knx | sensors | Remarks |
|---|---|---|---|---|---|---|
| ESP/Arduino lib v2.3.0 | 340k | 477k | 473k | 492k | 497k | |
| ESP/Arduino lib v2.4.2 | 360k | 491k | 491k | 509k | 513k | No sleep |
| MY_LANGUAGE en-GB | x | x | x | x | x | |
| USE_WPS | - | x | - | - | - | WPS |
| USE_SMARTCONFIG | - | x | - | - | - | SmartConfig |
| USE_ARDUINO_OTA | - | - | - | - | - | |
| MQTT_LIBRARY_TYPE PUBSUBCLIENT | x | x | x | x | x | |
| USE_DOMOTICZ | - | x | x | x | x | |
| USE_HOME_ASSISTANT | - | x | x | x | x | |
| USE_MQTT_TLS | - | - | - | - | - | |
| USE_KNX | - | - | - | x | - | |
| USE_WEBSERVER | x | x | x | x | x | WifiManager |
| USE_EMULATION | - | x | x | - | x | |
| USE_DISCOVERY | - | x | x | x | x | |
| WEBSERVER_ADVERTISE | - | x | x | x | x | |
| MQTT_HOST_DISCOVERY | - | x | x | x | x | |
| USE_TIMERS | - | - | x | x | x | |
| USE_TIMERS_WEB | - | - | x | x | x | |
| USE_SUNRISE | - | - | x | x | x | |
| USE_RULES | - | - | x | x | x | |
| USE_ADC_VCC | x | x | x | x | x | |
| USE_DS18B20 | - | - | - | - | - | Single sensor |
| USE_DS18x20 | - | x | x | x | x | Multiple sensors |
| USE_DS18x20_LEGACY | - | - | - | - | - | Multiple sensors |
| Feature or Sensor | minimal | classic | sonoff | knx | sensors | |
| USE_I2C | - | - | x | x | x | |
| USE_SHT | - | - | x | x | x | |
| USE_HTU | - | - | x | x | x | |
| USE_BMP | - | - | x | x | x | |
| USE_BME680 | - | - | - | - | x | |
| USE_BH1750 | - | - | x | x | x | |
| USE_VEML6070 | - | - | - | - | x | |
| USE_ADS1115 | - | - | - | - | x | |
| USE_ADS1115_I2CDEV | - | - | - | - | - | |
| USE_INA219 | - | - | - | - | x | |
| USE_SHT3X | - | - | x | x | x | |
| USE_TSL2561 | - | - | - | - | x | |
| USE_MGS | - | - | - | - | x | |
| USE_SGP30 | - | - | x | x | x | |
| USE_SI1145 | - | - | - | - | x | |
| USE_LM75AD | - | - | x | x | x | |
| USE_APDS9960 | - | - | - | - | - | |
| USE_MCP230xx | - | - | - | - | - | |
| USE_MPR121 | - | - | - | - | - | |
| USE_CCS811 | - | - | - | - | - | |
| USE_MPU6050 | - | - | - | - | - | |
| Feature or Sensor | minimal | classic | sonoff | knx | sensors | |
| USE_SPI | - | - | - | - | - | |
| USE_MHZ19 | - | - | x | x | x | |
| USE_SENSEAIR | - | - | x | x | x | |
| USE_PMS5003 | - | - | x | x | x | |
| USE_NOVA_SDS | - | - | x | x | x | |
| USE_PZEM004T | - | - | x | x | x | |
| USE_SERIAL_BRIDGE | - | - | x | x | x | |
| USE_SDM120 | - | - | - | - | x | |
| USE_SDM630 | - | - | - | - | x | |
| USE_IR_REMOTE | - | - | x | x | x | |
| USE_IR_HVAC | - | - | - | - | x | |
| USE_IR_RECEIVE | - | - | x | x | x | |
| USE_WS2812 | - | x | x | x | x | |
| USE_WS2812_DMA | - | - | - | - | - | |
| USE_ARILUX_RF | - | - | x | x | x | |
| USE_SR04 | - | - | x | x | x | |
| USE_TM1638 | - | - | - | - | - | |
| USE_RF_FLASH | - | - | x | x | x |
Changelog
Version 6.2.0 20180901
- Allow user override of define MAX_RULE_VARS and MAX_RULE_TIMERS (#3561)
- Disable wifi sleep for both Esp8266/Arduino core 2.4.1 and 2.4.2 to solve device freeze caused by Espressif SDK bug (#3554)
- Change DS18B20 driver to provide better instant results
- Change some sensor drivers to provide instant results
- Change define USE_ALL_SENSORS to USE_SENSORS as it doesn't contain all sensors due to duplicate I2C addresses
- Change some sensor update timings: AdcEvery 200 -> 250, Senseair 300 -> 250, SDM120 300 -> 250, SDM630 300 -> 250
- Change default Wifi config option from WPS to Wifi Manager if WPS is disabled or Wifi Smartconfig if webserver is disabled or Wifi Serial input if Smartconfig is disabled
- Change SHT1x driver to provide better instant results and fix I2C interference
- Change DHT driver to provide better instant results and add decimals to DHT11 (#3164)
- Change DS18x20 driver to provide better instant results (#3169)
- Change CounterType 1 from milliseconds to microseconds (#3437)
- Change scheduler for better sleep support using Uptime, Delay, PulseTime and TelePeriod, Blinktime (#3581)
- Remove unused functionality from Sonoff-minimal to save space
- Remove WPS and SmartConfig from sonoff-minimal saving 56k code space
- Remove TSL2561 debug message and update library (#2415)
- Remove forced restart when sleep command is executed (#3554)
- Fix invalid response using more than 4 switches and domoticz
- Fix sonoff-minimal not using default settings
- Fix unsecure main webpage update
- Fix DHT driver mixing values for different sensors (#1797)
- Fix EnergyReset3 regression not clearing total energy (#2723)
- Fix rules once regression from v6.1.0 (#3198, #3226)
- Fix command Scale buffer overflow (#3236)
- Fix possible WDT due to long MQTT publish handling (#3313)
- Fix command TimeDst/TimeStd invalid JSON (#3322)
- Fix handling of default names when using names starting with shortcut character ",0,1 or 2 (#3392, #3600, #3618)
- Fix LM75AD I2C sensor detection (#3408)
- Fix iFan02 power on state (#3412, #3530)
- Fix some Pow R2 and S31 checksum errors using optimized re-sync (#3425)
- Fix SDM120 reporting wrong negative values to Domoticz (#3521)
- Fix MQTT reconnection detection when using TasmotaMqtt library (#3558)
- Fix OtaMagic when file path contains a dash (-) (#3563)
- Fix Sonoff Bridge data reception when using Portisch EFM8 firmware using in data buffer length (#3605)
- Add read sensor retry to DS18B20, DS18x20, DHT, SHT1X and HTU21
- Add user selection of Wifi Smartconfig as define USE_SMARTCONFIG in user_config.h
- Add wifi and mqtt status led blinkyblinky to be disabled by SetOption31 1. Does not work when LedPower is On (deliberate) (#871, #2230, #3114, #3155)
- Add support for TM1638 switch (#2226)
- Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525)
- Add support for APDS9960 proximity sensor (#3051)
- Add support for MPR121 controller in input mode for touch buttons (#3142)
- Add support for MCP230xx for general purpose input expansion and command Sensor29 (#3188)
- Add default Wifi Configuration tool as define WIFI_CONFIG_NO_SSID in user_config.h if no SSID is configured (#3224)
- Add command Timers 0/1 to globally disable or enable armed timers (#3270)
- Add support for CCS811 sensor (#3309)
- Add Turkish language file (#3332)
- Add command SerialSend4 to send binary serial data (#3345)
- Add initial support for sensor MPU6050 (#3352)
- Add rule triggers Wifi#Connected and Wifi#Disconnected (#3359)
- Add option + to command Rule to concatenate new rule with existing rules (#3365)
- Add message when JavaScript is not enabled in webbrowser (#3388)
- Add build time setting of ButtonTopic and SwitchTopic (#3414)
- Add iFan02 Fanspeed + and Fanspeed - command options (#3415)
- Add Individual HSBColorX commands (#3430, #3615)
- Add output support on MCP23008/MCP23017 (#3436)
- Add modulo option to rules like rule1 on Time#Minute|5 do backlog power on;delay 200;power off endon (#3466)
- Add RGB support for Domoticz (#3547)
- Add all ruletimer values to command RuleTimer result message (#3571)
- Add command Publish2 for publishing retained MQTT messages (#3593)
- Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have user control over debounce timing. Default is 50mS (#3594)
- Add RuleX debug options 8,9,10 (StopOnError) to control RuleX execution status after an exception restart (#3607)
- Add rule variables %sunrise%, %sunset%, %uptime% and %time% (#3608)
- Add optional MQTT_TELE_RETAIN to Energy Margins message (#3612, 3614)